XPS evidence of degradation mechanism in CH3NH3PbI3 hybrid perovskite

Advancements in Perovskite Nanocrystal Stability Enhancement: A Comprehensive Review

Over the past decade, perovskite technology has been increasingly applied in solar cells, nanocrystals, and light-emitting diodes (LEDs). Perovskite nanocrystals (PNCs) have attracted significant interest in the field of optoelectronics owing to their exceptional optoelectronic properties. Compared with other common nanocrystal materials, perovskite nanomaterials have many advantages, such as high absorption coefficients and tunable bandgaps. Owing to their rapid development in efficiency and huge potential, perovskite materials are considered the future of photovoltaics. Among different types of PNCs, CsPbBr₃ perovskites exhibit several advantages. CsPbBr₃ nanocrystals offer a combination of enhanced stability, high photoluminescence quantum yield, narrow emission bandwidth, tunable bandgap, and ease of synthesis, which distinguish them from other PNCs, and make them suitable for various applications in optoelectronics and photonics. However, PNCs also have some shortcomings: they are highly susceptible to degradation caused by environmental factors, such as moisture, oxygen, and light, which limits their long-term performance and hinders their practical applications. Recently, researchers have focused on improving the stability of PNCs, starting with the synthesis of nanocrystals and optimizing (i) the external encapsulation of crystals, (ii) ligands used for the separation and purification of nanocrystals, and (iii) initial synthesis methods or material doping. In this review, we discuss in detail the factors leading to instability in PNCs, introduce stability enhancement methods for mainly inorganic PNCs mentioned above, and provide a summary of these approaches.

Temperature Dependence of Photochemical Degradation of MAPbBr3 Perovskite

The experimental results of X-ray diffraction (XRD), optical absorbance, scanning electron microscopy (SEM), and X-ray photoelectron spectra (XPS) of the core levels and valence bands of MAPbBr3 (MA-CH3NH3+) perovskite before and after exposure to visible light for 700 h at temperatures of 10 and 60 °C are presented. It reveals that the light soaking at 60 °C induces the decomposition of MAPbBr3 perovskite accompanied with the decay of organic cation and the release of a PbBr2 phase as a degradation product whereas the photochemical degradation completely disappears while the aging temperature is decreased to 10 °C.

Analysis of Perovskite Solar Cell Degradation over Time Using NIR Spectroscopy—A Novel Approach

In recent years, there has been a dynamic development of photovoltaic materials based on perovskite structures. Solar cells based on perovskite materials are characterised by a relatively high price/performance ratio. Achieving stability at elevated temperatures has remained one of the greatest challenges in the perovskite solar cell research community. However, significant progress in this field has been made by utilising different compositional engineering routes for the fabrication of perovskite semiconductors such as triple cation-based perovskite structures. In this work, a new approach for the rapid analysis of the changes occurring in time in perovskite structures was developed. We implemented a quick and inexpensive method of estimating the ageing of perovskite structures based on an express diagnosis of light reflection in the near-infrared region. The possibility of using optical reflectance in the NIR range (900–1700 nm) to observe the ageing of perovskite structures over time was investigated, and changes in optical reflectance spectra of original perovskite solar cell structures during one month after PSC production were monitored. The ratio of characteristic pikes in the reflection spectra was determined, and statistical analysis by the two-dimensional correlation spectroscopy (2D-COS) method was performed. This method allowed correctly detecting critical points in thermal ageing over time.

Reducing the Photodegradation of Perovskite Quantum Dots to Enhance Photocatalysis in CO2 Reduction

Solution-processed perovskite quantum dots (QDs) have been intensively researched as next-generation photocatalysts owing to their outstanding optical properties. Even though the intrinsic physical properties of perovskite QDs have been significantly improved, the chemical stability of these materials remains questionable. Their low long-term chemical stability limits their commercial applicability in photocatalysis. In this study, we investigated the photodegradation mechanisms of perovskite QDs and their hybrids via photoluminescence (PL) by varying the excitation power and the ultraviolet (UV) exposure power. Defects in perovskite QDs and the interface between the perovskite QD and the co-catalyst influence the photo-stability of perovskite QDs. Consequently, we designed a stable perovskite QD film via an in-situ cross-linking reaction with amine-based silane materials. The surface ligand comprising 2,6-bis(N-pyrazolyl)pyridine nickel(II) bromide (Ni(ppy)) and 5-hexynoic acid improved the interface between the Ni co-catalyst and the perovskite QD. Then, ultrathin SiO2 was fabricated using 3-aminopropyltriethoxy silane (APTES) to harness the strong surface binding energy of the amine functional group of APTES with the perovskite QDs. The Ni co-catalyst content was further increased through Ni doping during purification using a short surface ligand (3-butynoic acid). As a result, stable perovskite QDs with rapid charge separation were successfully fabricated. Time-correlated single photon counting (TCSPC) PL study demonstrated that the modified perovskite QD film exhibited slow photodegradation owing to defect passivation and the enhanced interface between the Ni co-catalyst and the perovskite QD. This interface impeded the generation of hot carriers, which are a critical factor in photodegradation. Finally, a stable red perovskite QD was synthesized by applying the same strategy and the mixture between red and green QD/Ni(ppy)/SiO2 displayed an CO2 reduction capacity for CO (0.56 µmol/(g∙h)).

Correlation of elastic and optoelectronic properties near structural phase transition in organic-inorganic lead iodide perovskite single crystals

The experimental evidence of the influence of the structural phase transition on the elastic and optoelectronic properties of CH₃NH₃PbI₃single crystals has been reported. A peak in the attenuation for longitudinal and shear ultrasonic waves and a step-like anomaly in their velocity have been found near the structural the orthorhombic-to-tetragonal phase transition (160 K). The narrow hysteresis observed in the temperature dependences of the elastic properties confirms that this is the first-order phase transition. A redshift of the absorption threshold (of about 110 meV) has been revealed both in the photocurrent (PC) and in the photoluminescence (PL) spectra with increasing temperature from 140 to 160 K. In the orthorhombic phase of CH₃NH₃PbI₃single crystals, the fine exciton structure in the PC spectrum has been found with an exciton binding energy of 19-25 meV. The peculiarities of the PC and PL spectra near the phase transition temperature (160 K) have been observed within a wider temperature range in contrast to the elastic anomalies that can be explained by the complex structure of the near-surface region. It may be essential for the further development of optoelectronic devices based on hybrid halide perovskites.