Measurement of individual external doses of Tokyo Electric Power Company Holdings employees working in Fukushima Prefecture and the relationship between individual external doses and air dose rates in areas including difficult-to-return zones

Absolute Method for Measuring Environmental Radioactive Materials Using Imaging Plates

ABSTRACT

We had previously developed a measurement method using an imaging plate (IP) to evaluate and address surface contamination caused by the release of radioactive materials during the Fukushima nuclear accident. The measurement units for the surface contamination density were in relative values [described as relative luminescence levels measured in luminescence arbitrary units (LAU)], but the evaluation was required in absolute values, such as Bq cm -2 , to enable appropriate control of exposure doses. This study establishes a method for converting the IP measurements of surface contamination density due to environmental radioactivity into absolute values. Soil contaminated with radioactive materials from the Fukushima nuclear accident was collected to create a working reference material (WRM). The conversion coefficient for surface contamination density was calculated using the WRM values measured with an IP and high-purity germanium detectors. The IP measurement values were converted into the surface contamination density using the conversion coefficient. The WRM values measured with the IP and high-purity germanium detectors were 324.1 LAU and 32.22 ± 2.27 Bq cm -2 , respectively. The surface contamination density conversion factor was calculated as 0.0994. The surface contamination density on the roof of the Tsukuba City facility was re-evaluated using the conversion factor. The average value of 29,972 Bq m -2 matched the amount of radioactive material fallen in Tsukuba City. By standardizing the measurement conditions for surface contamination when using IPs, we successfully quantified the surface contamination density with an accuracy comparable to that of conventional methods. This method is expected to make a significant contribution to efficient radiation safety management.

Consideration of the conversion factor from air dose rates to individual external dose per hour after the Fukushima accident-individual external dose measurements of a TEPCO employee in Fukushima prefecture over a 9 year period

The accident at Fukushima Daiichi Nuclear Power Plant (FDNPP) in 2011 resulted in the dispersion of radioactive materials throughout the surrounding area and an increase in the air dose rate was even confirmed in Fukushima City, which is located approximately 60 km northeast of FDNPP. A Tokyo Electric Power Company (TEPCO) Holdings employee, who has lived and worked in Fukushima City since the FDNPP accident, measured individual external doses, GPS data, and his activities in Fukushima Prefecture over a 9 year period beginning in 2014. This data provides valuable information about the area. The data show the following results. (i) Comparison of the air dose rate at the home location to the individual external dose per hour at the home shows that the average conversion factor has increased over the 9 years and exceeded 0.3 since 2019, indicating an overall relatively good correlation. (ii) Individual external doses measured in the office on the fourth floor of a concrete structure in Fukushima City have not changed significantly from 2014 to 2022, when air dose rates showed a decrease. (iii) Outdoor individual external doses, such as those measured when commuting on foot, have a relatively strong correlation with air dose rates from airborne monitoring with the conversion factor of about 0.6. The conversion factor do not differ significantly from 2014 to 2022.In this study, the individual external dose data is applicable to the TEPCO measurer and is not necessarily representative of all residents of Fukushima City. However individual external dose data for 9 consecutive years will be useful for estimating individual external doses from air dose rates, and estimating annual additional exposure doses, if even some of them are applicable to similar life patterns and lifestyles.

Statistical evaluation of individual external exposure dose of outdoor worker and ambient dose rate at evacuation ordered zones after the Fukushima Daiichi Nuclear Power Station accident

Following the accident at the Fukushima Daiichi Nuclear Power Station, evacuation orders were issued for the surrounding communities. In order to lift the evacuation order, it is necessary to determine individual external doses in the evacuated areas. The purpose of this study was to determine the quantitative relationship between individual external doses and ambient dose rates per hour as conversion coefficients. More specifically, individual external doses of Tokyo Electric Power Company Holdings employees in difficult-to-return zone were measured broadly over a long period (fiscal year 2020 to fiscal year 2022). To obtain highly accurate estimates, we used not only ambient dose rates based on airborne radiological monitoring data, but also Integrated dose rate map data that had been statistically corrected to correspond to local ambient dose rate gradients on the ground. As a result, the conversion coefficients based on the ambient dose rate map measured by airborne radiological monitoring were 0.42 for the Evacuation-Order Lifted Zones (ELZs), 0.37 for the Special Zones for Reconstruction and Rehabilitation (SZRRs), and 0.47 for the Difficult-to-Return Zones without SZRRs (DRZs). On the other hand, the conversion coefficients based on the Integrated dose rate map which is a highly accurate dose rate map based on statistical analysis of various types of monitoring that have been studied in government projects in recent years, were 0.78 for the ELZs, 0.72 for the SZRRs and 0.82 for the DRZs. Using these conversion coefficients, the individual external dose can be estimated from two representative ambient dose rate maps provided by the government.

Continuing Steady Challenges Involved in the Lifting of Evacuation Orders after the Fukushima Daiichi Nuclear Power Plant Accident

ABSTRACT

Steady efforts for recovery and reconstruction after the accident at the Fukushima Daiichi Nuclear Power Plant have been underway for 12.5 y. The present study reports on the world's first-ever efforts for a gradual and safe return to areas contaminated with radiation fallout and reconstruction support by providing an overview of the actual situation regarding the strategy for return, especially with the transition after the lifting of the evacuation order by the Japanese government. A stage-by-stage progression of the evacuation order and lifting strategy is summarized chronologically in the following three phases: the Emergency Phase in 2011, the Reconstruction Phase from 2013 to 2020, and the Challenging Phase for Lifting All the Evacuation Zones from 2023. Through the lifting strategy of the government, the number of evacuees decreased significantly, especially during the Reconstruction Phase, from 152,113 in May 2013 to 37,826 in May 2020. It is crucial to strengthen support for reconstruction and convey an unbiased and accurate understanding of Fukushima Prefecture by developing a concrete strategy for community development and increasing the size of the exchange population.