Electrochemical platform based on nitrogen-doped graphene/chitosan nanocomposite for selective Pb2+ detection

Enhanced Acetaminophen Electrochemical Sensing Based on Nitrogen-Doped Graphene

Because of the widespread acetaminophen usage and the danger of harmful overdosing effects, developing appropriate procedures for its quantitative and qualitative assay has always been an intriguing and fascinating problem. A quick, inexpensive, and environmentally friendly approach based on direct voltage anodic graphite rod exfoliation in the presence of inorganic salt aqueous solution ((NH₄)₂SO₄-0.3 M) has been established for the preparation of nitrogen-doped graphene (exf-NGr). The XRD analysis shows that the working material appears as a mixture of few (76.43%) and multi-layers (23.57%) of N-doped graphenes. From XPS, the C/O ratio was calculated to be 0.39, indicating a significant number of structural defects and the existence of multiple oxygen-containing groups at the surface of graphene sheets caused by heteroatom doping. Furthermore, the electrochemical performances of glassy carbon electrodes (GCEs) modified with exf-NGr for acetaminophen (AMP) detection and quantification have been assessed. The exf-NGr/GCE-modified electrode shows excellent reproducibility, stability, and anti-interfering characteristics with improved electrocatalytic activity over a wide detection range (0.1-100 µM), with a low limit for AMP detection (LOD = 3.03 nM). In addition, the developed sensor has been successfully applied in real sample analysis for the AMP quantification from different commercially available pharmaceutical formulations.

Eco-friendly synthesis of sulphur-doped graphenes with applicability in caffeic acid electrochemical assay

A new electrode based on glassy carbon modified with a sulphur-doped graphene material was successfully developed and applied for caffeic acid (CA) voltammetric detection and quantification. The structural features of sulphur-doped graphene (exfGR-S) characterized by different physicochemical and analytical techniques are presented. Cyclic voltammetry (CV) technique was employed to evaluate the electrochemical behavior of both bare glassy carbon (GCE) and modified GCE/exfGr-S electrodes towards CA oxidation. The study revealed that the modified electrode exhibits superior electrochemical performances compared to the bare electrode, with a broad CA detecting range (from 0.1 to 100.0 µM), a low detection limit 3.03 × 10^-8 M), excellent anti-interference capabilities, as well as good stability and repeatability. The developed electrochemical sensor appears to be a promising candidate for real sample quality control analysis since it successfully displayed its ability to directly detect CA in commercially available coffee product without any pretreatment.

Novel Aminosilane (APTES)-Grafted Polyaniline@Graphene Oxide (PANI-GO) Nanocomposite for Electrochemical Sensor

Lead is a potentially toxic element (PTE) that has several adverse medical effects in humans. Its presence in the environment became prominent due to anthropogenic activities. The current study explores the use of newly developed composite materials (organic-inorganic hybrid) based on PANI-GO-APTES for electrochemical detection of Pb²⁺ in aqueous solution. The composite material (PANI-GO-APTES) was synthesized by chemical method and was characterized with SEM, XPS, XEDS, XRD, TGA, FTIR, EIS and CV. The result of characterization indicates the successful synthesis of the intended material. The PANI-GO-APTES was successfully applied for electrochemical detection of Pb²⁺ using cyclic voltammetry and linear sweep voltammetry method. The limit of detection of Pb²⁺ was 0.0053 µM in the linear range of 0.01 µM to 0.4 µM. The current response produced during the electrochemical reduction of Pb²⁺ catalyzed by PANI-GO-APTES was also very repeatable, reproducible and rapid. The application of PANI-GO-APTES-modified GCE in real sample analysis was also established. Therefore, PANI-GO-APTES is presented as a potential Pb²⁺ sensor for environmental and human health safety.

One-step electrochemical sensor based on an integrated probe toward sub-ppt level Pb2+ detection by fast scan voltammetry

Herein, a one-step electrochemical sensor for selective and sensitive detection of lead ion Pb²⁺ was developed based on an integrated probe meso-tetra(4-carboxyphenyl) porphine (TCPP)-multi-walled carbon nanotubes (MWCNTs)@Fe₃O₄, which is TCPP-modified magnetic multi-walled carbon nanotubes. In the integrated probe, TCPP is a porphyrin with a specific cavity structure which could selectively chelate with Pb²⁺, MWCNTs with good electric conductivity provide a place to load TCPP and form a specific adsorption state of Pb²⁺ on the electrode surface, and Fe₃O₄ enables the rapid separation and one-step fabrication of the electrochemical sensor. Based on it, the sample pre-enrichment, separation and determination can be integrated, making the whole process very fast and simple. In addition, fast scan voltammetry (FSV) with a scan rate up to 200 V/s could be used to improve the detection sensitivity greatly, benefitting from the specific adsorption state formed. Under the optimal conditions obtained through orthogonal experiments including adsorption time, integrated probe dosage and solution pH, there was a good linear relationship between the peak current and Pb²⁺ concentration ranging from 2.0 × 10^-4 μg L^-1 to 2.0 × 10^-3 μg L^-1, with the limit of detection (LOD) being 6.7 × 10^-5 μg L^-1 (S/N = 3) i.e. 0.067 ppt. Analysis of actual water samples was successful. Therefore, being simple, fast, selective and sensitive, the one-step electrochemical sensor proposed has a good potential in practical applications.

Electrochemical lead(II) biosensor by using an ion-dependent split DNAzyme and a template-free DNA extension reaction for signal amplification

A voltammetric biosensor for lead(II) (Pb²⁺) is described that is based on signal amplification by using an ion-dependent split DNAzyme and template-free DNA extension reaction. The Pb²⁺-dependent split DNAzyme was assembled on gold nanoparticles (Au@Fe₃O₄), and this nanoprobe then was exposed to Pb²⁺ which causes the split-off of DNAzymes to release primers containing 3'-OH groups (S₁ and S₂). The template-free DNA extension reaction triggers the generation of long ssDNA nanotails, which then can bind the free redox probe N,N'-bis(2-(trimethylammonium iodide)propylene)perylene-3,4,9,10-tetracarboxyldiimide (PDA⁺) via electrostatic adsorption. Hence, the concentration of PDA⁺ in solution is reduced. Therefore, less free PDA⁺ can be immobilized on a glassy carbon electrode modified with electrodeposited gold nanoparticles (depAu) to produce an electrochemical signal, typically measured at ∼0.38 V (vs. SCE) for quantitation of Pb²⁺. The use of a Pb²⁺-dependent split DNAzyme avoids the usage of a proteinic enzyme. It also increases the sensitivity of the sensor which has a lower detection limit of 30 pM of Pb²⁺. Graphical abstract Novel electrochemical biosensor based on the amplification of ion-dependent split DNAzyme and template-free DNA extension reaction for trace detection of Pb²⁺.

Epitaxial Graphene Sensors Combined with 3D-Printed Microfluidic Chip for Heavy Metals Detection

In this work, we investigated the sensing performance of epitaxial graphene on Si-face 4H-SiC (EG/SiC) for liquid-phase detection of heavy metals (e.g., Pb and Cd), showing fast and stable response and low detection limit. The sensing platform proposed includes 3D-printed microfluidic devices, which incorporate all features required to connect and execute lab-on-chip (LOC) functions. The obtained results indicate that EG exhibits excellent sensing activity towards Pb and Cd ions. Several concentrations of Pb²⁺ solutions, ranging from 125 nM to 500 µM, were analyzed showing Langmuir correlation between signal and Pb²⁺ concentrations, good stability, and reproducibility over time. Upon the simultaneous presence of both metals, sensor response is dominated by Pb²⁺ rather than Cd²⁺ ions. To explain the sensing mechanisms and difference in adsorption behavior of Pb²⁺ and Cd²⁺ ions on EG in water-based solutions, we performed van-der-Waals (vdW)-corrected density functional theory (DFT) calculations and non-covalent interaction (NCI) analysis, extended charge decomposition analysis (ECDA), and topological analysis. We demonstrated that Pb²⁺ and Cd²⁺ ions act as electron-acceptors, enhancing hole conductivity of EG, due to charge transfer from graphene to metal ions, and Pb²⁺ ions have preferential ability to binding with graphene over cadmium. Electrochemical measurements confirmed the conductometric results, which additionally indicate that EG is more sensitive to lead than to cadmium.

Graphene-derived nanomaterials as recognition elements for electrochemical determination of heavy metal ions: a review

This review (with 155 refs.) summarizes the progress made in the past few years in the field of electrochemical sensors based on graphene-derived materials for the determination of heavy metal ions. Following an introduction of this field and a discussion of the various kinds of modified graphenes including graphene oxide and reduced graphene oxide, the review covers graphene based electrodes modified (or doped) with (a) heteroatoms, (b) metal nanoparticles, (c) metal oxides, (d) small organic molecules, (e) polymers, and (f) ternary nanocomposites. Tables are provided that afford an overview of representative methods and materials for fabricating electrochemical sensors. Furthermore, sensing mechanisms are discussed. A concluding section presents new perspectives, opportunities and current challenges. Graphical Abstract Schematic illustration of electrochemical sensor for heavy metal ion sensing based on heteroatom-doped graphene, metal-modified graphene, metal-oxide-modified graphene, organically modified graphene, polymer-modified graphene, and ternary graphene based nanocomposites.

Electrocatalytic determination of Cd2+ and Pb2+ using an l-cysteine tungstophosphate self-assembled monolayer on a polycrystalline gold electrode

Constructing a sensitive electrochemical sensor based on (Cys)PW for Cd²⁺ and Pb²⁺ detection at the nanomolar level with remarkable selectivity.

Understanding Graphene Response to Neutral and Charged Lead Species: Theory and Experiment

Deep understanding of binding of toxic Lead (Pb) species on the surface of two-dimensional materials is a required prerequisite for the development of next-generation sensors that can provide fast and real-time detection of critically low concentrations. Here we report atomistic insights into the Lead behavior on epitaxial graphene (Gr) on silicon carbide substrates by thorough complementary study of voltammetry, electrical characterization, Raman spectroscopy, and Density Functional Theory (DFT). It is verified that the epitaxial graphene exhibits quasi-reversible anode reactions in aqueous solutions, providing a well-defined redox peak for Pb species and good linearity over a concentration range from 1 nM to 1 µM. The conductometric approach offers another way to investigate Lead adsorption, which is based on the formations of stable charge-transfer complexes affecting the p-type conductivity of epitaxial graphene. Our results suggest the adsorption ability of the epitaxial graphene towards divalent Lead ions is concentration-dependent and tends to saturate at higher concentrations. To elucidate the mechanisms responsible for Pb adsorption, we performed DFT calculations and estimated the solvent-mediated interaction between Lead species in different oxidative forms and graphene. Our results provide central information regarding the energetics and structure of Pb-graphene interacting complexes that underlay the adsorption mechanisms of neutral and divalent Lead species. Such a holistic understanding favors design and synthesis of new sensitive materials for water quality monitoring.

Flexible Graphene-Based Wearable Gas and Chemical Sensors

Wearable electronics is expected to be one of the most active research areas in the next decade; therefore, nanomaterials possessing high carrier mobility, optical transparency, mechanical robustness and flexibility, lightweight, and environmental stability will be in immense demand. Graphene is one of the nanomaterials that fulfill all these requirements, along with other inherently unique properties and convenience to fabricate into different morphological nanostructures, from atomically thin single layers to nanoribbons. Graphene-based materials have also been investigated in sensor technologies, from chemical sensing to detection of cancer biomarkers. The progress of graphene-based flexible gas and chemical sensors in terms of material preparation, sensor fabrication, and their performance are reviewed here. The article provides a brief introduction to graphene-based materials and their potential applications in flexible and stretchable wearable electronic devices. The role of graphene in fabricating flexible gas sensors for the detection of various hazardous gases, including nitrogen dioxide (NO₂), ammonia (NH₃), hydrogen (H₂), hydrogen sulfide (H₂S), carbon dioxide (CO₂), sulfur dioxide (SO₂), and humidity in wearable technology, is discussed. In addition, applications of graphene-based materials are also summarized in detecting toxic heavy metal ions (Cd, Hg, Pb, Cr, Fe, Ni, Co, Cu, Ag), and volatile organic compounds (VOCs) including nitrobenzene, toluene, acetone, formaldehyde, amines, phenols, bisphenol A (BPA), explosives, chemical warfare agents, and environmental pollutants. The sensitivity, selectivity and strategies for excluding interferents are also discussed for graphene-based gas and chemical sensors. The challenges for developing future generation of flexible and stretchable sensors for wearable technology that would be usable for the Internet of Things (IoT) are also highlighted.