Construction of an all-solid-state artificial Z-scheme system consisting of Bi2WO6/Au/CdS nanostructure for photocatalytic CO2 reduction into renewable hydrocarbon fuel

Advances in photocatalytic NO oxidation by Z-scheme heterojunctions

The fast development of urbanisation and industrialisation has led to a rise in nitrogen oxide (NOx) emissions, specifically nitric oxide (NO). One effective method for reducing the harmful effects of this dangerous air pollutant on both human health and the environment is the photocatalytic oxidation of NO. Z-scheme heterojunctions enhance incident light utilisation and increase photocatalytic activity, eventually leading to better NO oxidation performance by encouraging the effective separation of charges and migration. A comprehensive discussion of Z-scheme-based heterojunctions is provided in this review paper, with a focus on their applications in the photocatalytic oxidation of NO. Significant progress has been made in the fabrication of efficient photocatalytic devices in recent years, with Z-scheme-based heterojunctions proving to be particularly successful. The review looks into the various methodologies used to create Z-scheme-based heterojunctions as well as photocatalytic NO oxidation mechanisms. Recent studies on photocatalysts employing Z-scheme heterojunctions for the photocatalytic oxidation of NO are also discussed. The possibilities for new opportunities as well as the present challenges, barriers, advances, and solutions have been emphasized.

Synergistic Effect of Amorphous Ti(IV)-Hole and Ni(II)-Electron Cocatalysts for Enhanced Photocatalytic Performance of Bi2WO6

Bi2WO6 has become a common photocatalyst due to its advantages of simple synthesis and high activity. However, the defects of pure Bi2WO6 such as low light reception hinder its application in photocatalysis. In this study, based on the modification of Bi2WO6 with Ti(IV) as a cavity co-catalyst, new Ni- and Ti-doped nanosheets of Bi2WO6 (Ni/Ti-Bi2WO6) were prepared by a one-step wet thermal impregnation method and used for the photocatalytic degradation of tetracycline. The experimental results showed that the photocatalytic activity of Ni/Ti-Bi2WO6 modified by the two-component catalyst was significantly better than those of pure Bi2WO6 and Ti-Bi2WO6 modified with Ti(IV) only. The photocatalytic effect of Ni/Ti-Bi2WO6 with different Ni/Ti molar ratios was investigated by the degradation of TC. The results showed that 0.4Ni/Ti-Bi2WO6 possessed the best photocatalytic performance, with a degradation rate of 92.9% at 140 min TC. The results of cycling experiments showed that the catalyst exhibited high stability after five cycles. The scavenger experiment demonstrated that the h+ and O2− were the main reactive species. The enhanced photocatalytic activity of Bi2WO6 could be attributed to the synergistic effect between the Ti(IV) as a hole cocatalyst and Ni(II) as an electron cocatalyst, which effectively promoted the separation of photogenerated carriers.

Recent review of BixMOy (M=V, Mo, W) for photocatalytic CO2 reduction into solar fuels

The utilization of solar energy for CO₂ conversion not only enables a green and low-carbon recycling of CO₂ with renewable energy, but also solves ecological problems. Bi_xMO_y (M = V, Mo, W) materials have typical layered structures and unique electronic properties that provide suitable band gaps and potential to meet the basic conditions for CO₂ reduction. However, pristine Bi_xMO_y faces with problems such as small specific surface area, insufficient active sites, low charge carriers' separation and utilization efficiency. This review comprehensively described the basic principles and reaction pathways of photocatalytic CO₂ reduction, and further presented the research progress of Bi_xMO_y catalysts in CO₂ conversion reactions. In this perspective, we further focus on the design concepts and modification strategies to improve the photocatalytic CO₂ reduction activity of Bi_xMO_y, such as morphology control, constructing surface vacancies and heterojunction fabrication. Finally, based on representative researches, the present review will be expected to provide updated information and insights for developing advanced Bi_xMO_y materials to further improve CO₂ reduction activity and selectivity.

Synergism of carbon quantum dots and Au nanoparticles with Bi2MoO6 for activity enhanced photocatalytic oxidative degradation of phenol

Localized surface plasmon resonance (LSPR) offers an opportunity to enhance the efficiency of photocatalysis. However, the photocatalysts's plasmonic enhancement is still limited, as most metals/semiconductors depend on LSPR contribution of isolated metal nanoparticles. In the present work, carbon quantum dots (CQDs) and Au nanoparticles (NPs) were simultaneously assembled on the surface of a three-dimensional (3D) spherical Bi₂MoO₆ (BMO) nanostructure with surface oxygen vacancies (SOVs). The collective excitation of CQDs and Au NPs demonstrated an effective strategy to improve the utilization of up-conversion emission and plasmonic energy. The contribution of CQDs and Au NPs assembled on the surface of BMO (7 wt% CQDs/Au/BMO) realized a photocatalytic phenol degradation enhancement (apparent rate constants, k _app/min^-1) of 56.5, 9.5 and 3.9, and 2.2-fold increase compared to BMO, BMO-SOVs, Au/BMO and CQDs/BMO, respectively. The as-fabricated 7 wt% CQDs/Au/BMO exhibited the highest mineralization rate for phenol degradation with 72.4% TOC removal rate in 120 min. The excellent photocatalytic performance of CQDs/Au/BMO was attributed to the synergistic effect of CQDs, Au NPs and SOVs. The CQD up-conversion emission synergetically boosts Au NPs' LSPR significantly promoting the separation and migration of photogenerated electron (e^-)/hole (h⁺) pairs, which could improve the oxygen molecule activation process and thereby their ability to generate reactive oxygen species (ROS). The present work is a step forward to understand and construct similar photocatalysts using an entirely reasonable hypothesis of activity enhancement mechanism according to the active species capture experiments and band structure analysis.

Gas Phase Photocatalytic CO2 Reduction, “A Brief Overview for Benchmarking”

Photocatalytic CO2 reduction is emerging as an affordable route for abating its ever increasing concentration. For commercial scale applications, many constraints are still required to be addressed. A variety of research areas are explored, such as development of photocatalysts and photoreactors, reaction parameters and conditions, to resolve these bottlenecks. In general, the photocatalyst performance is mostly adjudged in terms of its ability to only produce hydrocarbon products, and other vital parameters such as light source, reaction parameters, and type of photoreactors used are not normally given appropriate attention. This makes a comprehensive comparison of photocatalytic performance quite unrealistic. Hence, probing the photocatalytic performance in terms of apparent quantum yield (AQY) with the consideration of certain process and experimental parameters is a more reasonable and prudent approach. The present brief review portrays the importance and impact of aforementioned parameters in the field of gas phase photocatalytic CO2 reduction.

Bismuth-Based Photocatalysts for Solar Photocatalytic Carbon Dioxide Conversion

Photocatalytic CO₂ conversion into solar fuels is an effective means for simultaneously solving both the greenhouse effect and energy crisis. In the past ten years, bismuth-based photocatalysts for environmental remediation have experienced a golden period of development. However, solar photocatalytic CO₂ conversion has only been developed over the past five years and, until now, no reviews have been published on bismuth-based photocatalysts for the photocatalytic conversion of CO₂ . For the first time, solar photocatalytic CO₂ conversion systems are reviewed herein. Synthetic methods and photocatalytic CO₂ performances of bismuth-based photocatalysts, including Sillén-structured BiOX (X=Cl, Br, I); Aurivillius-structured Bi₂ MO₆ (M=Mo, W); and Scheelite-structured BiVO₄ , Bi₂ S₃ , BiYO₃ , and BiOIO₃ , are summarized. In addition, activity-enhancing strategies for this photocatalyst family, including oxygen vacancies, bismuth-rich strategy, facet control, conventional type II heterojunction, Z-scheme heterojunction, and cocatalyst deposition, are reviewed. Finally, the main mechanistic research methods, such as in situ FTIR spectroscopy and theoretical calculations, are presented. Challenges and research trends reported in studies of bismuth-based photocatalysts for photocatalytic CO₂ conversion are discussed and summarized.

A visible-light-driven Z-scheme CdS/Bi12GeO20 heterostructure with enhanced photocatalytic degradation of various organics and the reduction of aqueous Cr(VI)

A series of Z-scheme CdS/Bi₁₂GeO₂₀ heterostructures were successfully obtained by a simple hydrothermal method. The Z-scheme CdS/Bi₁₂GeO₂₀ heterostructures show outstanding photocatalytic performance for degrading the various organic pollutants of the waste water, and for the reduction of aqueous Cr(VI) under visible light. For degradation of 2-Mercaptobenzothiazole (MBT), the Z-scheme 30CdS/Bi₁₂GeO₂₀ heterostructure exhibits the superior rate constant, which is about 22.67 and 4.6 times higher than that of the pure Bi₁₂GeO₂₀ and CdS, respectively. Meanwhile, as we expected, the Z-scheme 30CdS/Bi₁₂GeO₂₀ heterostructure also displays the enhanced photocatalytic performance for degradation of Levofloxacin (LEV), Ciprofloxacin (CIP), Tetracycline (TC) and reduction of aqueous Cr(VI). The enhancement of photocatalytic performance is attributed to the high redox capacity and the strong interfacial interaction between CdS and Bi₁₂GeO₂₀, which can effectively improve the separation of photo-induced electron-hole pairs. Additionally, the photocatalytic mechanism over the Z-scheme CdS/Bi₁₂GeO₂₀ heterostructure is provided. The research work may provide a promising approach to fabricate other Z-scheme heterostructures with efficient photocatalytic performance.

Ultrafine Au nanoparticles anchored on Bi2MoO6 with abundant surface oxygen vacancies for efficient oxygen molecule activation

Au NPs were anchored on Bi₂MoO₆ with rich SOVs to improve O₂ activation for photocatalytic degradation of phenol and dye.

Review on nanoscale Bi-based photocatalysts

Nanoscale Bi-based photocatalysts are promising candidates for visible-light-driven photocatalytic environmental remediation and energy conversion. However, the performance of bulk bismuthal semiconductors is unsatisfactory. Increasing efforts have been focused on enhancing the performance of this photocatalyst family. Many studies have reported on component adjustment, morphology control, heterojunction construction, and surface modification. Herein, recent topics in these fields, including doping, changing stoichiometry, solid solutions, ultrathin nanosheets, hierarchical and hollow architectures, conventional heterojunctions, direct Z-scheme junctions, and surface modification of conductive materials and semiconductors, are reviewed. The progress in the enhancement mechanism involving light absorption, band structure tailoring, and separation and utilization of excited carriers, is also introduced. The challenges and tendencies in the studies of nanoscale Bi-based photocatalysts are discussed and summarized.

Bimetallic–graphene sandwiched core–satellite colloidal nanodendrites as an efficient visible-NIR-sun light active photo-system for carbon dioxide reduction

The synthesis of multimetallic core–satellite nanodendrites (Pt@Au@rGO) is reported. These were then used as a highly active catalyst for CO₂ photoreduction to HCOOH with excellent reusability and colloidal stability.