In situ synthesized SnO2 nanorod/reduced graphene oxide low-dimensional structure for enhanced lithium storage

Effects of annealing temperature on the structure, morphology, and photocatalytic properties of SnO2/rGO nanocomposites

Water pollution abatement is a problem in today's society that requires urgent attention. Moreover, photocatalysts are an effective method to treat environmental pollution, and SnO₂/reduced graphene oxide composite photocatalysts have been extensively studied in recent years. The synthesis parameters for these photocatalysts significantly affect their morphologies, structures, and properties. In this study, we investigated the effects of annealing temperatures on the properties of SnO₂/reduced graphene oxide nanocomposites, which were hydrothermally fabricated at 180 °C for 24 h and annealed at 200 °C-800 °C. The structural characteristics of the fabricated nanocomposites were studied via x-ray diffraction, field emission scanning electron microscopy, and Raman scattering analyses. The observed results indicated that increasing the annealing temperature from 200 °C to 800 °C increased the average SnO₂ nanoparticle size from 4.60 nm to 9.27 nm; in addition, the Raman scattering peaks of the SnO₂ increased, and those of the reduced graphene oxide significantly decreased as the annealing temperature was increased. Furthermore, the specific surface area of the samples decreased due to the increase in calcination temperature. The amount of reduced graphene oxide content in all the samples was measured using thermo-gravimetric analysis. The optical properties of the samples were studied using ltraviolet-visible absorption spectra, and their photocatalytic activity was evaluated by decomposing methylene blue under visible light using the samples as catalysts. In particular, the photocatalytic properties of nanocomposites decreased significantly with increasing annealing temperature. Among the samples, the photocatalytic activity of that annealed at 200 °C is most satisfactory as it has the smallest particle size and the largest specific surface area. The results of our research could facilitate the production of efficient catalysts with suitable properties.

Design and synthesis of hierarchical NiO/Ni3V2O8 nanoplatelet arrays with enhanced lithium storage properties

Hierarchical NiO/Ni₃V₂O₈ nanoplatelet arrays (NPAs) grown on Ti foil were prepared as free-standing anodes for Li-ion batteries (LIBs) via a simple one-step hydrothermal approach followed by thermal treatment to enhance Li storage performance. Compared to the bare NiO, the fabricated NiO/Ni₃V₂O₈ NPAs exhibited significantly enhanced electrochemical performances with superior discharge capacity (1169.3 mA h g⁻¹ at 200 mA g⁻¹), excellent cycling stability (570.1 mA h g⁻¹ after 600 cycles at current density of 1000 mA g⁻¹) and remarkable rate capability (427.5 mA h g⁻¹ even at rate of 8000 mA g⁻¹). The excellent electrochemical performances of the NiO/Ni₃V₂O₈ NPAs were mainly attributed to their unique composition and hierarchical structural features, which not only could offer fast Li⁺ diffusion, high surface area and good electrolyte penetration, but also could withstand the volume change. The ex situ XRD analysis revealed that the charge/discharge mechanism of the NiO/Ni₃V₂O₈ NPAs included conversion and intercalation reaction. Such NiO/Ni₃V₂O₈ NPAs manifest great potential as anode materials for LIBs with the advantages of a facile, low-cost approach and outstanding electrochemical performances.

Hierarchical NiO/Ni₃V₂O₈ nanoplatelet arrays (NPAs) grown on Ti foil were prepared as free-standing anodes for Li-ion batteries (LIBs) via a simple one-step hydrothermal approach followed by thermal treatment to enhance Li storage performance.