Recent progress in the synthesis and applications of 2D metal nanosheets

Nanoscale Design for High Entropy Alloy Electrocatalysts

Due to their distinctive physical and chemical characteristics, high entropy alloys (HEAs), a class of alloys comprising multiple elements, have garnered a lot of attention. It is demonstrated recently that HEA electrocatalysts increase the activity and stability of several processes. In this paper, the most recent developments in HEA electrocatalysts research are reviewed, and the performance of HEAs in catalyzing key reactions in water electrolysis and fuel cells is summarized. In addition, the design strategies for HEA electrocatalysts optimization is introduced, which include component selection, size optimization, morphology control, structural engineering, crystal phase regulation, and theoretical prediction, which can guide component selection and structural design of HEA electrocatalysts.

Recent advances in catalytic oxidation of VOCs by two-dimensional ultra-thin nanomaterials

Catalytic oxidation, an end-of-pipe treatment technology for effectively purifying volatile organic compounds (VOCs), has received widespread attention. The crux of catalytic oxidation lies in the development of efficient catalysts, with their optimization necessitating a comprehensive analysis of the catalytic reaction mechanism. Two-dimensional (2D) ultra-thin nanomaterials offer significant advantages in exploring the catalytic oxidation mechanism of VOCs due to their unique structure and properties. This review classifies strategies for regulating catalytic properties and typical applications of 2D materials in VOCs catalytic oxidation, in addition to their characteristics and typical characterization techniques. Furthermore, the possible reaction mechanism of 2D Co-based and Mn-based oxides in the catalytic oxidation of VOCs is analyzed, with a special focus on the synergistic effect between oxygen and metal vacancies. The objective of this review is to provide valuable references for scholars in the field.

Nanoscale goldbeating: Solid-state transformation of 0D and 1D gold nanoparticles to anisotropic 2D morphologies

Goldbeating is the ancient craft of thinning bulk gold (Au) into gossamer leaves. Pioneered by ancient Egyptian craftsmen, modern mechanized iterations of this technique can fabricate sheets as thin as ∼100 nm. We take inspiration from this millennia-old craft and adapt it to the nanoscale regime, using colloidally synthesized 0D/1D Au nanoparticles (AuNPs) as highly ductile and malleable nanoscopic Au ingots and subjecting them to solid-state, uniaxial compression. The applied stress induces anisotropic morphological transformation of AuNPs into 2D leaf form and elucidates insights into metal nanocrystal deformation at the extreme length scales. The induced 2D morphology is found to be dependent on the precursor 0D/1D NP morphology, size (0D nanosphere diameter and 1D nanorod diameter and length), and their on-substrate arrangement (e.g., interparticle separation and packing order) prior to compression. Overall, this versatile and generalizable solid-state compression technique enables new pathways to synthesize and investigate the anisotropic morphological transformation of arbitrary NPs and their resultant emergent phenomena.

Two-Dimensional Metal Nanostructures: From Theoretical Understanding to Experiment

This paper reviews recent studies on the preparation of two-dimensional (2D) metal nanostructures, particularly nanosheets. As metal often exists in the high-symmetry crystal phase, such as face centered cubic structures, reducing the symmetry is often needed for the formation of low-dimensional nanostructures. Recent advances in characterization and theory allow for a deeper understanding of the formation of 2D nanostructures. This Review firstly describes the relevant theoretical framework to help the experimentalists understand chemical driving forces for the synthesis of 2D metal nanostructures, followed by examples on the shape control of different metals. Recent applications of 2D metal nanostructures, including catalysis, bioimaging, plasmonics, and sensing, are discussed. We end the Review with a summary and outlook of the challenges and opportunities in the design, synthesis, and application of 2D metal nanostructures.

Etching suppression as a means to Pt dendritic ultrathin nanosheets by seeded growth

2D ultrathin metal nanostructures are emerging materials displaying distinct physical and chemical properties compared to their analogues of different dimensionalities. Nanosheets of fcc metals are intriguing, as their crystal structure does not favour a 2D configuration. Thanks to their increased surface-to-volume ratios and the optimal exposure of low-coordinated sites, 2D metal nanostructures can be advantageously exploited in catalysis. Synthesis approaches to ultrathin nanosheets of pure platinum are scarce compared to other noble metals and to Pt-based alloys. Here, we present the selective synthesis of Pt ultrathin nansosheets by a simple seeded-growth method. The most crucial point in our approach is the selective synthesis of Pt seeds comprising planar defects, a main driving force for the 2D growth of metals with fcc structure. Defect engineering is employed here, not in order to disintegrate, but for conserving the defect comprising seeds. This is achieved by in situ elimination of the principal etching agent, chloride, which is present in the PtCl₂ precursor. As a result of etching suppression, twinned nuclei, that are selectively formed during the early stage of nucleation, survive and grow to multipods comprising planar defects. Using the twinned multipods as seeds for the subsequent 2D overgrowth of Pt from Pt(acac)₂ yields ultrathin dendritic nanosheets, in which the planar defects are conserved. Using phenylacetylene hydrogenation as a model reaction of selective hydrogenation, we compared the performance of Pt nanosheets to that of a commercial Pt/C catalyst. The Pt nanosheets show better stability and much higher selectivity to styrene than the commercial Pt/C catalyst for comparable activity.

Light-induced tumor theranostics based on chemical-exfoliated borophene

Among 2D materials (Xenes) which are at the forefront of research activities, borophene, is an exciting new entry due to its uniquely varied optical, electronic, and chemical properties in many polymorphic forms with widely varying band gaps including the lightest 2D metallic phase. In this paper, we used a simple selective chemical etching to prepare borophene with a strong near IR light-induced photothermal effect. The photothermal efficiency is similar to plasmonic Au nanoparticles, with the added benefit of borophene being degradable due to electron deficiency of boron. We introduce this selective chemical etching process to obtain ultrathin and large borophene nanosheets (thickness of ~4 nm and lateral size up to ~600 nm) from the precursor of AlB₂. We also report first-time observation of a selective Acid etching behavior showing HCl etching of Al to form a residual B lattice, while HF selectively etches B to yield an Al lattice. We demonstrate that through surface modification with polydopamine (PDA), a biocompatible smart delivery nanoplatform of B@PDA can respond to a tumor environment, exhibiting an enhanced cellular uptake efficiency. We demonstrate that borophene can be more suitable for safe photothermal theranostic of thick tumor using deep penetrating near IR light compared to gold nanoparticles which are not degradable, thus posing long-term toxicity concerns. With about 40 kinds of borides, we hope that our work will open door to more discoveries of this top-down selective etching approach for generating borophene structures with rich unexplored thermal, electronic, and optical properties for many other technological applications.

Hot-Pressed Two-Dimensional Amorphous Metals and Their Electronic Properties

As an emerging research field, two-dimensional (2D) metals have been the subject of increasing research efforts in recent years due to their potential applications. However, unlike typical 2D layered materials, such as graphene, which can be exfoliated from their bulk parent compounds, it is hardly possible to produce 2D metals through exfoliation techniques due to the absence of Van der Waals gaps. Indeed, the lack of effective material preparation methods severely limits the development of this research field. Here, we report a PDMS-assisted hot-pressing method in glovebox to obtain ultraflat nanometer-thick 2D metals/metal oxide amorphous films of various low-melting-point metals and alloys, e.g., gallium (Ga), indium (In), tin (Sn), and Ga0.87Ag0.13 alloy. The valence states extracted from X-ray photoelectron spectroscopy (XPS) indicate that the ratios of oxidation to metal in our 2D films vary among metals. The temperature-dependent electronic measurements show that the transport behavior of 2D metal/metal oxide films conform with the 2D Mott’s variable range hopping (VRH) model. Our experiments provide a feasible and effective approach to obtain various 2D metals.

The Green Synthesis of 2D Copper Nanosheets and Their Light Absorption

In this study, a new green synthesis method for two-dimensional (2D) copper nanosheets is developed using methylsulfonylmethane (DMSO₂). The chemical composition and light absorption of 2D copper nanosheets are also studied. A new green method is mainly to utilize DMSO₂, which is environmentally friendly enough to be considered a food-grade chemical, unlike the conventional method using toxic chemicals, such as ammonia and hydrazine (N₂H₄). With a reducing agent, the aggregation of uncertain copper products was produced in the absence of DMSO₂, while 2D copper nanosheets were formed in the presence of DMSO₂. The optimum concentration of DMSO₂ as a surfactant was determined to be 2 M, resulting in large surface areas with regular edges. FTIR spectrum confirmed C–H bonding from DMSO₂ used to synthesize 2D copper nanosheets. The light absorption peak was revealed at 800 nm in the UV–vis spectrum. This proposed new green method not only has a simpler process than the conventional methods, such as hydrothermal method and chemical bath deposition, but also substitutes toxic chemicals with DMSO₂. 2D copper nanosheets can be used for various applications, including conductive filler or ink in the flexible electronics and laser photonics fields.

Colloidal graphene oxide enhances the activity of a lipase and protects it from oxidative damage: Insights from physicochemical and molecular dynamics investigations

Physical adsorption of lipase from Thermomyces lanuginosus onto single-layer sheets of graphene oxide (GO) was studied using the response surface methodology to evaluate the physicochemical factors - temperature, pH, ionic strength, and concentration - affecting the enzymatic activity and the immobilization efficiency. The immobilization efficiency and the activity of the enzyme were inversely proportional to each other. Specifically, higher pH values increased the immobilization efficacy, but produced changes in the aggregation state and secondary structure of the enzyme, thus decreasing its activity. Lower pH values, in turn, reduced the immobilization efficacy, but increased the activity of the adsorbed lipase. The adsorbed and the free lipase were followed during 600 ns and 3.5 μs, respectively, in molecular dynamics (MD) simulations. MD trajectories showed that irreversible adsorption freezes the enzyme in a state with a correctly opened catalytic cavity, while the active site remains without a direct interaction with the GO adsorbent. In contrast to the interfacial activation of lipases in a hydrophobic environment, where the catalytic pocket attaches to the hydrophobic surface, the adsorption onto GO made the active site of the lipase accessible by altering the tertiary structure of the enzyme, leading to a higher catalytic efficiency. Experimental investigations confirmed that the physical adsorption onto GO induces tertiary structure changes in the lipase and protects it from H₂O₂ by accepting the oxidative damage upon itself. In summary, the physical adsorption of the lipase onto GO is mainly affected by pH and could possibly provide a spreadable and robust catalytic interface for biotechnological applications.

Investigating the role of reducing agents on mechanosynthesis of Au nanoparticles

The influence of reducing agents on the mechanochemical synthesis of Au nanoparticles differ significantly from analogous solution syntheses. Environmentally benign mechanochemical syntheses of metal nanoparticles therefore require dedicated studies.