Nearly monodispersed MoS2 hierarchical architectures as superior anodes for electrochemical lithium-storage

1T MoS2growth from exfoliated MoS2nucleation as high rate anode for sodium storage

Recently, metallic 1T MoS₂has been investigated due to its excellent performance in electrocatalysts, photocatalysts, supercapacitors and secondary batteries. However, there are only a few fabrication methods to synthesize stable 1T MoS₂. In this work, exfoliated MoS₂is employed as seed crystals for the nucleation and growth of a stable 1T MoS₂grains by an epitaxial growth strategy. The 1T MoS₂displays a large interlayer spacing around 0.95 nm, excellent hydrophilia and more electrochemically active sites along the basal plane, which contribute an efficient ion/electron transport pathway and structural stability. When employed as the anode material for sodium ion batteries, the 1T MoS₂electrodes can survive 500 full charge/discharge cycles with a minimum capacity loss of 0.40 mAh g^-1cycle^-1tested at a current density of 1.0 A g^-1, and the capacity degradation is as low as 0.39 mAh g^-1cycle^-1at a current density of 2.0 A g^-1.

In situ production of a two-dimensional molybdenum disulfide/graphene hybrid nanosheet anode for lithium-ion batteries

A solvent-free, low-cost, high-yield and scalable single-step ball milling process is developed to construct 2D MoS₂/graphene hybrid electrodes for lithium-ion batteries. Electron microscopy investigation reveals that the obtained hybrid electrodes consist of numerous nanosheets of MoS₂ and graphene which are randomly distributed. The MoS₂/graphene hybrid anodes exhibit excellent cycling stability with high reversible capacities (442 mA h g⁻¹ for MoS₂/graphene (40 h); 553 mA h g⁻¹ for MoS₂/graphene (20 h); 342 mA h g⁻¹ for MoS₂/graphene (10 h)) at a high current rate of 250 mA g⁻¹ after 100 cycles, whereas the pristine MoS₂ electrode shows huge capacity fading with a retention of 37 mA h g⁻¹ at 250 mA g⁻¹ current after 100 cycles. The incorporation of graphene into MoS₂ has an extraordinary effect on its electrochemical performance. This work emphasises the importance of the construction of the 2D MoS₂/graphene hybrid structure to prevent capacity fading issues with the MoS₂ anode in lithium-ion batteries.

A solvent-free, low-cost, high-yield and scalable single-step ball milling process is developed to construct 2D MoS₂/graphene hybrid electrodes for lithium-ion batteries.