Upconversion luminescence properties of BaMoO4: Yb3+, Ln3+ (Ln3+ = Er3+/Tm3+, Er3+/Tm3+/Ho3+) micro-octahedrons

Modulating Visible-Light Driven NIR Lanthanide Polymer Photocatalysis for Amplification Detection of Exosomal Proteins and Cancer Diagnosis

Near-infrared (NIR) luminescent lanthanide materials hold great promise for bioanalysis, as they have anti-interference properties. The approach of efficient luminescence is sensitization through a reasonable chromophore to overcome the obstacle of the aqueous phase. The involvement of the surfactant motif is an innovative strategy to arrange the amphiphilic groups to be regularly distributed near the polymer to form a closed sensitized space. Herein, a lanthanide polymer (TCPP-PEI70K-FITC@Yb/SDBS) is designed in which the meso-tetra(4-carboxyphenyl)porphine (TCPP) ligand serves as both a sensitizer and photocatalytic switch. The surfactant sodium dodecyl benzenesulfonate (SDBS) wraps the photosensitive polymers to form a hydrophobic layer, which augments the light-harvesting ability and expedites its photocatalysis. TCPP-PEI70K-FITC@Yb/SDBS is subsequently applied as an amplified photocatalysis toolbox for universally regulating the generation of reactive oxygen species (ROS). Boosting 3,3',5,5'-tetramethylbenzidine (TMB) oxidation to produce blue products, a dual-mode biosensor is fabricated for improving the diagnosis of programmed death ligand-1-positive (PDL1) cancer exosomes. Exosomes were captured by Fe3O4 modified by the PDL1 aptamer, enabling replacement of alkaline phosphatase (ALP)-labeled multiple hybridized chains; then, the isolated ALP triggered a hydrolysis reaction to block the generation of oxTMB. Detection sensitivity improves by 1 order of magnitude through SDBS modulation, down to 104 particles/mL. The sensor performed well clinically in distinguishing cancer patients from healthy individuals, expanding physiological applications of near-infrared lanthanide luminescence.

Achieving Cross Time-Domain Multiplexed Signal Cascade and Cancer Exosomes Identification by Bridging Long Lifetime Phosphor to NIR-II Lanthanide Energy Transfer

Designing lanthanide luminescence lifetime sensors in the second near-infrared (NIR-II) window holds great potentials for physiological studies. However, the single lifetime signal is confined to one or two orders of magnitude of signal variation, which limits the sensitivity of lifetime probes. In this study, a lifetime cascade system, i.e., ZGO:Mn, Eu-DNA-1/TCPP-PEI70K@Yb-AptEpCAM, with a variety of signals (τm, τn, τµ, τm/τn and τm/τµ) is constructed for exosome identification using time-domain multiplexing. The sensitized ligand TCPP acts as both target-modulated switch and a bridge for connecting long lifetime ZGO:Mn, Eu-DNA-1 emitter to lanthanide Yb3+. This drives successive dual-path energy transfer and forms two D(donor)-A(acceptor) pairs. The lifetime variation is dominantly modulated by arranging TCPP as energy intermediate relay to covert milliseconds to nanoseconds to microseconds. It enables a broad lifetime range of six orders of magnitude. The presence of exosome specifically recognizes aptamers on TCPP-PEI70K@Yb-AptEpCAM to impede D-A pairs and reverse multiplexed response signals of the lifetime cascade system. The ratio lifetime signals τm/τn and τm/τµ achieve prominent exosome quantification and exosome type differentiation attributed to signal amplification. The cascade system relying on lifetime criteria can realize precise quantization and provide an effective strategy for subsequent physiological study.

Synergistic effects of rare earth doping and carbon quantum dots on BiOF/Bi2MoO6 heterojunctions for enhanced visible-near-infrared photocatalysis

Herein, we designed and synthesized a series of rare earth doped BiOF/Bi₂MoO₆ heterojunctions. The doping locations of rare earth ions were altered to determine the influence on the visible and near-infrared photocatalytic activity of heterojunctions. It is experimentally and theoretically confirmed that doping with Tm³⁺/Yb³⁺ in one semiconductor of the heterojunction produces superior photocatalytic efficiency than doping in both semiconductors. In addition, the near infrared photocatalytic efficiency strongly relied on upconversion luminescence from the Re³⁺ doped semiconductor in the heterojunction. By further modifying with CQDs, the CQDs/BiOF:Tm³⁺,Yb³⁺/Bi₂MoO₆ sample shows excellent visible and near-infrared photocatalytic performance, with 90% degradation of RhB occurring in the first 20 min under visible irradiation. This can be attributed to the large BET area, efficient photoinduced carrier separation and the upconversion process of the composite. This research will provide a systematic solution for realizing full-spectrum responsive and highly efficient photocatalysis by combination of rare earth ion doping, quantum dot modification and Z-scheme heterojunctions.

White-light emission in Yb3+/Er3+/Tm3+- and Yb3+/Er3+/Tm3+/Ho3+-dopedα-NiMoO4nanoparticles

Yb³⁺/Er³⁺/Tm³⁺- and Yb³⁺/Er³⁺/Tm³⁺/Ho³⁺-dopedα-NiMoO₄nanoparticles were synthesized using a microwave hydrothermal method and studied for white-light emission under 980 nm laser diode excitation. White upconversion (UC) light was successfully obtained with the appropriate control of blue, green, and red emissions by successfully tuning the Er³⁺and Ho³⁺concentrations in Yb³⁺/Er³⁺/Tm³⁺- and Yb³⁺/Er³⁺/Tm³⁺/Ho³⁺-dopedα-NiMoO₄, respectively. In addition, the white color emission was shown by the CIE chromaticity coordinates of samples. The energy transfer mechanisms are explained in detail based on the emission spectra and pump power density-dependent UC luminescence intensity in rare earth (Yb³⁺/Er³⁺/Tm³⁺and Yb³⁺/Er³⁺/Tm³⁺/Ho³⁺)-dopedα-NiMoO₄nanoparticles. The results indicate that Yb³⁺/Er³⁺/Tm³⁺- and Yb³⁺/Er³⁺/Tm³⁺/Ho³⁺-dopedα-NiMoO₄nanoparticles can be good candidates for white-light devices.

Hydrothermal synthesis of Eu3+-doped BaMoO4 fluorescent probe for the selective detection of Fe3+ ions

BaMoO4:Eu3+ fluorescent probe materials have high selectivity and sensitivity for Fe3+-ion detection and can be applied to the detection of Fe3+ in actual wastewater.

Lanthanide ion (Ln3+ )-based upconversion sensor for quantification of food contaminants: A review

The food safety issue has gradually become the focus of attention in modern society. The presence of food contaminants poses a threat to human health and there are a number of interesting researches on the detection of food contaminants. Upconversion nanoparticles (UCNPs) are superior to other fluorescence materials, considering the benefits of large anti-Stokes shifts, high chemical stability, non-autofluorescence, good light penetration ability, and low toxicity. These properties render UCNPs promising candidates as luminescent labels in biodetection, which provides opportunities as a sensitive, accurate, and rapid detection method. This paper intended to review the research progress of food contaminants detection by UCNPs-based sensors. We have proposed the key criteria for UCNPs in the detection of food contaminants. Additionally, it highlighted the construction process of the UCNPs-based sensors, which includes the synthesis and modification of UCNPs, selection of the recognition elements, and consideration of the detection principle. Moreover, six kinds of food contaminants detected by UCNPs technology in the past 5 years have been summarized and discussed fairly. Last but not least, it is outlined that UCNPs have great potential to be applied in food safety detection and threw new insight into the challenges ahead.

First-Principles Calculation of Photoelectric Property in Upconversion Materials through In3+ Doping

Multicolor turning holds great promise in optical intelligent recognition and optical imaging. Here, Er³⁺, Yb³⁺, and In codoped ZnO (Er/Yb/IZO) with a uniform block strucuture is obtained. The doping of In³⁺ ions enhances the multicolor upconversion luminescence (UCL) intensity of Er/Yb/IZO. Particularlly, the UCL of Er/Yb/I₂ZO turns from red through yellow to dominant green emission via increasing density power from 2.54 to 10.19 W/cm², thus realizing the power sensitiviy. First-principles theory is used to design a In³⁺, Yb³⁺, and Er³⁺ codoped ZnO. The band structure, total density of state and optical coefficient of Er/Yb/IZO have been studied via a generalized gradient approximation within density functional theory (DFT). The potential electron density and total electron density of the O atom increase with In³⁺ and Er³⁺/Yb³⁺ doping, which indicate that substitution of Zn²⁺ by In³⁺ and Er³⁺/Yb³⁺ generate positive vacancies on the surface. The band gap of Er/Yb/IZO decreases compare with that of pure ZnO. Furthermore, the optical coefficient of In³⁺ doping is enhanced compare with that of pure ZnO via using DFT calculations.