Detection of ferrous ion by etching-based multi-colorimetric sensing of gold nanobipyramids

Au@Ag Nanopencil with Au Tip and Au@Ag Rod: Multimodality Plasmonic Nanoprobe based on Asymmetric Etching for the Detection of SCN- and ClO. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023;19:e2302302. [PMID: 37211700 DOI: 10.1002/smll.202302302]

In this paper, Au@Ag nanopencil is designed as a multimodality plasmonic nanoprobe based on asymmetric etching for the detection of SCN- and ClO- . Au@Ag nanopencil with Au tip and Au@Ag rod is prepared by asymmetric tailoring of uniformly grown silver-covered gold nanopyramids under the combined effect of partial galvanic replacement and redox reaction. By asymmetric etching in different systems, Au@Ag nanopencil exhibits diversified changes in the plasmonic absorption band: O2 •- facilitated by SCN- etches Au@Ag rod from the end to the tip, causing a blue shift of the localized surface plasmon resonance (LSPR) peak as the aspect ratio decreases; while the ClO- can retain Au@Ag shell and etch Ag within rod from the tip to the end, causing a redshift of the LSPR peak as the coupling resonance weakens. Based on peak shifts in different directions, a multimodality detection of SCN- and ClO- has been established. The results demonstrate the detection limits of SCN- and ClO- are 160 and 6.7 nm, and the linear ranges are 1-600 µm and 0.05-13 µm, respectively. The finely designed Au@Ag nanopencil not only broadens the horizon of designing heterogeneous structures, but also enriches the strategy of constructing multimodality sensing platform.

Chromogenic Mechanisms of Colorimetric Sensors Based on Gold Nanoparticles

The colorimetric signal readout method is widely used in visualized analyses for its advantages, including visualization of test results, simple and fast operations, low detection cost and fast response time. Gold nanoparticles (Au NPs), which not only exhibit enzyme-like activity but also have the advantages of tunable localized surface plasmon resonance (LSPR), high stability, good biocompatibility and easily modified properties, provide excellent platforms for the construction of colorimetric sensors. They are widely used in environmental monitoring, biomedicine, the food industry and other fields. This review focuses on the chromogenic mechanisms of colorimetric sensors based on Au NPs adopting two different sensing strategies and summarizes significant advances in Au NP-based colorimetric sensing with enzyme-like activity and tunable LSPR characteristics. In addition, the sensing strategies based on the LSPR properties of Au NPs are classified into four modulation methods: aggregation, surface modification, deposition and etching, and the current status of visual detection of various analytes is discussed. Finally, the review further discusses the limitations of current Au NP-based detection strategies and the promising prospects of Au NPs as colorimetric sensors, guiding the design of novel colorimetric sensors.

Colorimetric and visual determination of iodide ions via morphology transition of gold nanobipyramids

The gold nanobipyramids (Au NBPs) are widely used in the analytical detection of biochemistry due to their unique localized surface plasmon resonance (LSPR) properties. In our developed approach, I^- in kelp was detected by etching Au NBPs in the presence of IO₃^-. Under acidic conditions, IO₃^- reacted rapidly with I^- to form I₂, subsequently I₂ reacted with I^- to form the intermediate I₃^-. In the presence of CTAB, Au NBPs were etched by I₂ derived from I₃^-, resulting in a decrease in the aspect ratio of Au NBPs, to form a significant blue shift of LSPR longitudinal peak and color variation of colloid which changed from blue-green to magenta and could be employed to quantitatively detect the concentration of I^- with the naked eye. A linear relationship can be found between the LSPR peak changes with the I^- concentration in a wide range from 4.0 μM to 15.0 μM, and the sensitive limit of detection (LOD) was 0.2 μM for UV-vis spectroscopy and the obvious color changes with a visual LOD was 4.0 μM for the naked eye. Benefiting from the high specificity, the proposed colorimetric detection of I^- in kelp samples was achieved, indicating the available potential of the colorimetric detection for the determination of I^- in real samples. What's more, this detection procedure was time-saving and could avoid tedious procedures.

A multicolor immunosensor for the visual detection of six sulfonamides based on manganese dioxide nanosheet-mediated etching of gold nanobipyramids

In reality, various sulfonamides (SAs) were alternately used in animal husbandry to avoid generating drug resistance. Thus, it is crucial to develop simple and high-throughput methods for detecting multiple or groups of SAs to realize rapid screening of total SAs residues in foods. We herein developed a sensitive and efficient MnO₂ nanosheets-mediated etching of gold nanobipyramids (AuNBPs), which can generate more vivid color changes, and further fabricated a high-throughput multicolor immunosensor for the visual screening/semi-quantitative detection of 6 different SAs including sulfamethazine (SMZ), sulfamethoxydiazine (SMD), sulfisomidine (SIM), sulfamerazine (SMR), sulfamonomethoxine (SMM) and sulfaquinoxaline (SQ) by using AuNBPs as signal and broad-specificity anti-SAs antibody as a bio-receptor. The immunosensor displays more vivid color changes, and has a lower visual detection limit and excellent specificity. It can be applied to detect as little as 1.0 ng/mL of SMZ, SMD, SMR and 2.0 ng/mL of SIM, SMM, SQ by bare eye observation, and 0.2 ng/mL of above 6 SAs by UV-visible spectrophotometry. The visual detection limit of the immunosensor is much lower than the maximum residue limit of total SAs (100 μg/kg) in edible tissues. The immunosensor was successfully applied to detect SMZ, SMD, SIM, SMR, SMM and SQ in milk with a recovery of 84%-106% and a RSD (n = 5) < 8%. The success of this study provided a promising assay for the on-site rapid screening of SMZ, SMD, SIM, SMR, SMM and SQ in food by bare eye observation. Importantly, the immunosensor may be expended as a general method for the visual screening/semi-quantitative detection of the group of other antibiotics by using the corresponding broad-specificity antibody as a bio-receptor.

Shape dependent sensing potential of gold nanoparticles in etching based multicolorimetric plasmonic-ELISA

In the present study, a systematic investigation has been carried out for the first time to assess the potential of three different shapes of gold nanoparticles (AuNPs), viz. nanorods (AuNRs), nanotriangles (AuNTs), and nanospheres (AuNSs), to develop a horseradish peroxidase (HRP) enzyme-mediated etching-based plasmonic ELISA (p-ELISA) strategy. The etching of the AuNPs in ELISA is achieved by 3'-3-5'-5-tetramethylbenzidine (TMB²⁺), which is produced by the biocatalytic conversion of chromogenic TMB via HRP. All three types of AuNPs were interacted with varying concentrations of TMB²⁺ (7-131 μM) (product of HRP enzyme reaction) and characterized for visible color change and by UV-Vis spectroscopy and transmission electron microscopy (TEM). From the comparative analysis of all three shapes of AuNPs, AuNRs exhibited vivid visible color change and absorbance intensity change compared to spherical and triangle-shaped nanoparticles. The TEM analysis of the etched nanoparticles revealed the gradual etching pattern of AuNRs compared to AuNTs which resulted in multicolor generation as opposed to AuNTs where the etching was relatively very fast and thus shows a faster shape transformation and poor color discrimination. Further, the potential of the AuNR etching-based optimized strategy was successfully demonstrated to develop an indirect competitive p-ELISA for human IgG detection. The developed p-ELISA showed an ultra-low visual limit of detection of 1 fg mL^-1 (∼6.54 aM) without the aid of any sophisticated instruments. In the future, the developed competitive p-ELISA strategy can be easily employed to develop cost-effective, portable, and point-of-care assays for the detection of various disease biomarkers with ultra-high sensitivity.

Integrating multiple hybridization chain reactions on gold nanoparticle and alkaline phosphatase-mediated in situ growth of gold nanobipyramids: An ultrasensitive and high color resolution colorimetric method to detect the mecA gene of Staphylococcus aureus

Colorimetry has been considered as a potential instrument-free platform for point-of-care genomic detection. However, it is limited by the poor sensitivity and low color resolution. Herein, we report a high-resolution colorimetric biosensor based on multiple hybridization chain reactions (HCRs) on gold nanoparticle (AuNP) and alkaline phosphatase (ALP)-mediated in situ growth of gold nanobipyramids (AuNBPs) for ultrasensitive detection of the Staphylococcus aureus (S. aureus) mecA gene. In our design, target DNA is hybridized with capture hairpin DNA on magnetic beads and then amplified by multiple HCRs on AuNP. Since biotin-labeled hairpin-structured nucleic acids are utilized to conduct HCRs, together with the large specific surface area of AuNP, the biotin- and streptavidin- based reaction results in a large amount of ALP on AuNP. With the aid of NADPH, ALP-mediated in situ growth of AuNBPs is observed, and a series of rainbow-like colors are associated with different target DNA concentrations. Through the multiple-amplification strategy produced by AuNP, HCRs, and enzymatic reactions, the target DNA as low as 2.71 pM can be detected with high specificity. Moreover, this method has been successfully applied to detect the mecA gene extracted from S. aureus. Therefore, the proposed method holds great potential in clinical diagnosis.

A colorimetric and fluorescence dual-signal determination for iron (II) and H2O2 in food based on sulfur quantum dots

A colorimetric and fluorescence dual-signal method based on sulfur quantum dots (SQDs) was established for determination of iron (II) (Fe²⁺) and H₂O₂ in foods. Due to the complexation of Fe²⁺ with SQD, Fe²⁺ can cause fluorescence quenching of SQDs, and the color of the mixed solution changed from light yellow to deep green. By use of Fenton reaction, H₂O₂ can restore the quenched fluorescence of SQDs, and the color of the mixture changed from green to colorless. The concentration of Fe²⁺ and H₂O₂ has a good linear relationship with the fluorescence intensity and absorbance in the range of 2.5-55 μM and 1.25-500 μM, and the detection limits were 1.41 μM and 0.54 μM, respectively. For determination of H₂O₂, the linear ranges were 1.17-1.97 mM and 0.867-1.50 mM, and the detection limits were 0.03 μM and 0.06 μM, respectively.

Fluorescence-Based Sensing of Pesticides Using Supramolecular Chemistry

The detection of pesticides in real-world environments is a high priority for a broad range of applications, including in areas of public health, environmental remediation, and agricultural sustainability. While many methods for pesticide detection currently exist, the use of supramolecular fluorescence-based methods has significant practical advantages. Herein, we will review the use of fluorescence-based pesticide detection methods, with a particular focus on supramolecular chemistry-based methods. Illustrative examples that show how such methods have achieved success in real-world environments are also included, as are areas highlighted for future research and development.

Visual detection of in vitro nucleic acid replication by submicro- and nano-sized materials

The rapid growth of in vitro nucleic acid replication has offered a powerful tool for clinical diagnosis, food safety detection and environmental monitorning. Successful implementation of various isothermal nucleic acid amplification methods enables rapid replication of target sequences without the participant of a thermal cycler. Point-of-need analysis possesses great superiorities in user-friendly, instant results analysis, low manufacturing, and consumable costs. To meet the great challenge of point-of-need analysis, developing simple and rapid visual methods becomes crucial. Submicro- and nanomaterials possess unique surface properties, which enables their rapid response to DNA amplicons. Their unique optical, magnetic, catalytic, and other physical/chemical properties have been frequently employed for the visual detection of in vitro nucleic acid replications. Herein, we aim to review the submicro- and nanomaterials-based visual methods for detection of nucleic acid amplification. The visual methods are classified according to the designing strategies (e.g. LSPR, bridging flocculation, luminescence, catalytic reaction, separation, etc.). The basic principles, merits and drawbacks of each strategy are described. The application in analysis of nucleic acid targets and non-nucleic acid targets are discussed. The main challenges and future research directions are also highlighted in this rapidly emerging field.