Silicon-based PbS-CQDs infrared photodetector with high sensitivity and fast response

High-Performance Ultra-Broadband Photodetector Based on Fe3O4/CrSiTe3 Heterostructures

Photodetectors based on advanced materials with a broad spectral photoresponse, high sensitivity, huge integration ability, room-temperature operation, and stable environmental stability are highly desired for diversified applications of imaging, sensing, and communication. Herein, a high-performance ultra-broadband photodetector based on an ultrathin two-dimensional (2D) Fe3O4 nanoflake heterostructure with high sensitivity was designed. The photodetector response light was from visible 405 nm to long-wave infrared (LWIR) 10.6 μm in ambient air. The competitive performances, including a high photoresponsivity (R) of 182.8 A W-1, fast speed with the rise time τr = 8.8 μs, and decay time τd = 4.1 μs, were demonstrated in the visible range. Notably, the device exhibits an excellent uncooled LWIR detection ability, with a high R of 1.4 A W-1 realized at a 1.5 V bias. In the full spectral range, the noise equivalent power is lower than 0.79 pW Hz-1/2, and specific detectivity (D*) is higher than 4.9 × 108 cm Hz1/2 W-1 in ambient air. This work provides alternative ultrathin 2D materials for future infrared optoelectronic devices.

Lead Chalcogenide Colloidal Quantum Dots for Infrared Photodetectors

Infrared detection technology plays an important role in remote sensing, imaging, monitoring, and other fields. So far, most infrared photodetectors are based on InGaAs and HgCdTe materials, which are limited by high fabrication costs, complex production processes, and poor compatibility with silicon-based readout integrated circuits. This hinders the wider application of infrared detection technology. Therefore, reducing the cost of high-performance photodetectors is a research focus. Colloidal quantum dot photodetectors have the advantages of solution processing, low cost, and good compatibility with silicon-based substrates. In this paper, we summarize the recent development of infrared photodetectors based on mainstream lead chalcogenide colloidal quantum dots.

Silicon: quantum dot photovoltage triodes

Silicon is widespread in modern electronics, but its electronic bandgap prevents the detection of infrared radiation at wavelengths above 1,100 nanometers, which limits its applications in multiple fields such as night vision, health monitoring and space navigation systems. It is therefore of interest to integrate silicon with infrared-sensitive materials to broaden its detection wavelength. Here we demonstrate a photovoltage triode that can use silicon as the emitter but is also sensitive to infrared spectra owing to the heterointegrated quantum dot light absorber. The photovoltage generated at the quantum dot base region, attracting holes from silicon, leads to high responsivity (exceeding 410 A·W-1 with Vbias of -1.5 V), and a widely self-tunable spectral response. Our device has the maximal specific detectivity (4.73 × 1013 Jones with Vbias of -0.4 V) at 1,550 nm among the infrared sensitized silicon detectors, which opens a new path towards infrared and visible imaging in one chip with silicon technology compatibility.

Room-Temperature Direct Synthesis of PbSe Quantum Dot Inks for High-Detectivity Near-Infrared Photodetectors

A PbSe colloidal quantum dot (QD) is typically a solution-processed semiconductor for near-infrared (NIR) optoelectronic applications. However, the wide application of PbSe QDs has been restricted due to their instability, which requires tedious synthesis and complicated treatments before being applied in devices. Here, we demonstrate efficient NIR photodetectors based on the room-temperature, direct synthesis of semiconducting PbSe QD inks. The in-situ passivation and the avoidance of ligand exchange endow PbSe QD photodetectors with high efficiency and low cost. By further constructing the PbSe QDs/ZnO heterostructure, the photodetectors exhibit the NIR responsivity up to 970 mA/W and a detectivity of 1.86 × 10¹¹ Jones at 808 nm. The obtained performance is comparable to that of the state-of-the-art PbSe QD photodetectors using a complex ligand exchange strategy. Our work may pave a new way for fabricating efficient and low-cost colloidal QD photodetectors.

A silicon-based PbSe quantum dot near-infrared photodetector with spectral selectivity

Traditional photodetectors usually respond to photons larger than the bandgap of a photosensitive material. In contrast to traditional photodetectors for broad-spectrum detection, the currently reported PbS/PMMA/PbSe CQD silicon-based photodetectors can detect spectrally selective light sources. This is attributed to two layers with specific functions, a filter layer on top and a photosensitive layer in contact with the silicon channel. Each of the target sources of the device has a selectivity factor of more than 10 against non-target sources. The s-PD (selective photodetector) has three significant advantages: the ability to tunably adjust the detectable spectral range by easily adjusting the size of QDs. The second is using a new architecture to achieve a high-performance selective photodetector, and finally, the ease-of-integration with silicon. The above features enable the device to meet the needs of particular fields such as secure communication, surveillance, and infrared imaging.