Novel 2D/2D BiOBr/UMOFNs direct Z-scheme photocatalyst for efficient phenol degradation

Decorating of 2D indium oxide onto 2D bismuth oxybromide to enhance internal electric field and stimulate artificial photosynthesis

CO2 photocatalytic reduction is an excellent strategy for promoting solar-to-chemical energy conversion and alleviating the severe environmental crisis. In this study, 2D indium oxide (IO) is decorated on 2D bismuth oxybromide (BOB) nanosheets to gain BOB/IO (BxIy) heterojunction. The optimal B3I1 composite affords a CO production rate of 54.2 μmol⋅g-1, about 2.2 times and 11.3 times higher than those of the pristine BOB and IO, respectively. The introduction of IO significantly enhances the internal electric field (IEF), leading to accelerated charge transfer and prolonged lifetime of the photogenerated carriers. In the BxIy composite, the BOB and IO serve as the electron acceptor and donor, respectively, facilitating the reduction of CO2 and oxidation of H2O. In-situ DRIFTs spectra are used to confirm the catalytic active sites and provide insights into the mechanism of CO2 photoreduction. The results suggest *COOH and *CO2- species played a crucial role in the formation of CO. This work presents a valuable perspective on understanding the charge transfer route and developing highly efficient photocatalysts for CO2 photoreduction.

A review on the progress of the photocatalytic removal of refractory pollutants from water by BiOBr-based nanocomposites

Organic matters from various sources such as the manufacturing, agricultural, and pharmaceuticals industries is continuously discharged into water bodies, leading to increasingly serious water pollution. Photocatalytic technology is a clean and green advanced oxidation process, that can successfully decompose various organic pollutants into small inorganic molecules such as carbon dioxide and water under visible light irradiation. Bismuth oxybromide (BiOBr) is an attractive visible light photocatalyst with good photocatalytic performance, suitable forbidden bandwidth, and a unique layered structure. However, the rapid combination of the electron-hole pairs generated in BiOBr leads to low photocatalytic activity, which limits its photocatalytic performance. Due to its unique electronic structure, BiOBr can be coupled with a variety of different functional materials to improve its photocatalytic performance. In this paper, We present the morphologically controllable BiOBr and its preparation process with the influence of raw materials, additives, solvents, synthesis methods, and synthesis conditions. Based on this, we propose design synthesis considerations for BiOBr-based nanocomplexes in four aspects: structure, morphology and crystalline phase, reduction of electron-hole pair complexation, photocorrosion resistance, and scale-up synthesis. The literature on BiOBr-based nanocomposites in the last 10 years (2012-2022) are summarized into seven categories, and the mechanism of enhanced photocatalytic activity of BiOBr-based nanocomposites is reviewed. Moreover, the applications of BiOBr-based nanocomposites in the fields of degradation of dye wastewater, antibiotic wastewater, pesticide wastewater, and phenol-containing wastewater are reviewed. Finally, the current challenges and prospects of BiOBr-based nanocomposites are briefly described. In general, this paper reviews the construction of BiOBr-based nanocomposites, the mechanism of photocatalytic activity enhancement and its research status and application prospects in the degradation of organic pollutants.

High-Stability Ti3C2-QDs/ZnIn2S4/Ti(IV) Flower-like Heterojunction for Boosted Photocatalytic Hydrogen Evolution

The practical application of photocatalytic H₂-evolution is greatly limited by its sluggish charge separation, insufficient active sites, and stability of photocatalysts. Zero-dimensional (0D) Ti₃C₂ MXene quantum dots (MQDs) and amorphous Ti(IV) have been proven to be potential substitutes for noble co-catalyst to accelerate the separation of photogenerated electron-hole pairs and prevent the self-oxidation of photocatalysts, leading to better photocatalytic H₂-evolution performance with long-term stability. In this study, amorphous Ti(IV) and MQDs co-catalysts were successfully deposited on ZnIn₂S₄ (ZIS) microspheres composed of ultra-thin nanosheets via a simple impregnation and self-assembly method (denoted as MQDs/ZIS/Ti(IV)). As expected, the optimal MQDs/ZIS/Ti(IV) sample exhibited a photocatalytic H₂-evolution rate of 7.52 mmol·g⁻¹·h⁻¹ and excellent photostability without metallic Pt as the co-catalyst in the presence of Na₂S/Na₂SO₃ as hole scavenger, about 16, 4.02 and 4.25 times higher than those of ZIS, ZIS/Ti(IV), and MQDs/ZIS, respectively. The significantly enhanced photocatalytic H₂-evolution activity is attributed to the synergistic effect of the three-dimensional (3D) flower-like microsphere structure, the amorphous Ti(IV) hole co-catalyst, and a Schottky junction formed at the ZIS–MQDs interface, which offers more active sites, suppresses self-photocorrosion, and photo-generates the charge recombination of ZIS.

Self-Assembly of a 3D Hollow BiOBr@Bi-MOF Heterostructure with Enhanced Photocatalytic Degradation of Dyes

Considering the flexibility, adjustable pore structure, and abundant active sites of metal-organic frameworks (MOFs), rational design and fine control of the MOF-based hetero-nanocrystals is a highly important and challenging subject. In this work, self-assembly of a 3D hollow BiOBr@Bi-MOF microsphere was fabricated through precisely controlled dissociation kinetics of the self-sacrificial template (BiOBr) for the first time, where the residual quantity of BiOBr and the formation of Bi-MOF were carefully regulated by changing the reaction time and the capability of coordination. Meanwhile, the hollow microstructure was formed in BiOBr@Bi-MOF through the Oswald ripening mechanism to separate photogenerated electron-hole pairs and increase the adsorption capacity of Bi-MOF for dyes, which significantly enhanced the photocatalytic degradation efficiency of RhB from 56.4% for BiOBr to 99.4% for the optimal BiOBr@Bi-MOF microsphere. This research broadens the selectivity of semiconductor/MOF hetero-nanocrystals with reasonable design and flexible synthesis.

2D/2D Heterojunction systems for the removal of organic pollutants: A review

Photocatalysis is considered to be an effective way to remove organic pollutants, but the key to photocatalysis is finding a high-efficiency and stable photocatalyst. 2D materials-based heterojunction has aroused widespread concerns in photocatalysis because of its merits in more active sites, adjustable band gaps and shorter charge transfer distance. Among various 2D heterojunction systems, 2D/2D heterojunction with a face-to-face contact interface is regarded as a highly promising photocatalyst. Due to the strong coupling interface in 2D/2D heterojunction, the separation and migration of photoexcited electron-hole pairs are facilitated, which enhances the photocatalytic performance. Thus, the design of 2D/2D heterojunction can become a potential model for expanding the application of photocatalysis in the removal of organic pollutants. Herein, in this review, we first summarize the fundamental principles, classification, and strategies for elevating photocatalytic performance. Then, the synthesis and application of the 2D/2D heterojunction system for the removal of organic pollutants are discussed. Finally, the challenges and perspectives in 2D/2D heterojunction photocatalysts and their application for removing organic pollutants are presented.

Synergistic adsorption and photocatalytic degradation of persist synthetic dyes by capsule-like porphyrin-based MOFs

The synergistic effects involving surface adsorption and photocatalytic degradation commonly play significant roles in the removal of persistent synthetic organics from wastewater in the case of porous semiconductors. Inspired by the visible-light harvesting advantages of porphyrin-based MOFs, a capsule-like bimetallic porphyrin-based MOF (PCN-222(Ni/Hf)) has been successfully constructed through a facile hydrothermal method. In which, the Hf (IV) ions were exactly bonded to the carboxyl groups substituted on the porphyrin rings, meanwhile the Ni (II) ions were finely bonded to the -N inside the porphyrin rings. The adsorption/photocatalytic performances were assessed by using four persistent dyes including rhodamine B (RhB), basic violet 14 (BV14), crystal violet, and acid black 210 (AB210) as the target substances, and enhanced total removal efficiency was obtained by the bimetallic PCN-222(Ni/Hf) in comparison with that of single PCN-222(Hf). The electrochemical analyses and the sacrificial agent capture experiments were carried out to elucidate the photocatalytic mechanism, and the adsorption/photocatalytic stability of PCN-222(Ni/Hf) is also investigated. The work has broadened the applications of porphyrin-based MOFs in the removal of organics by combining their excellent surface adsorption capacity and photocatalytic activities.

Oxygen vacancy-rich 2D/0D BiO1-XBr/AgBr Z-scheme photocatalysts for efficient visible light driven degradation of tetracycline

Semiconductor-based photocatalytic technology, as a green and promising avenue in response to the abuse of antibiotic pollution and human health crisis, is restricted by the limited photo-absorption and fast recombination of photogenerated carriers. In this paper, all these challenges were settled by AgBr particles incorporated into oxygen-deficient BiOBr nanosheets, forming novel oxygen vacancy (OV)-rich 2D/0D Z-scheme heterojunctions. Z-scheme photocatalytic system has an effective separation rate of photogenerated carriers and an ability to maintain original redox capacity. Moreover, introducing OVs in the Z-scheme can not only improve the visible light absorption ability, but also serve as recombination centers, thus promoting the separation of electrons and holes. Notably, the photocatalytic activity of 2D/0D BiO_1-XBr/AgBr (2:1) was significantly improved under the irradiation of visible light, removing 81% of tetracycline after 25 min, which was about 2.62 times and 2.03 times as high as those of BiO_1-XBr and AgBr, respectively. In addition, the 2D/0D BiO_1-XBr/AgBr (2:1) indicated high photocatalytic stability and reusability, and its tetracycline degradation efficiency remained stable after five cycles. In summary, this work suggests that the photocatalysts have a great potential to remove TC and provides a possible strategy for purifying water.