On the biocompatibility of graphene oxide towards vascular smooth muscle cells

Graphene Oxide Significantly Modifies Cardiac Parameters and Coronary Endothelial Reactivity in Healthy and Hypertensive Rat Hearts Ex Vivo

Interactions of graphene oxide (GO) with an ex vivo rat heart and its coronary vessels have not been studied yet. Moreover, the conflicting data on the "structure-properties" relationships do not allow for biomedical applications of GO. Herein, we study the impact of GO on the ex vivo isolated rat heart, normotensive and hypertensive, under the working heart and the constant-pressure perfusion (Langendorff) regimes. Four structural GO variants of the following initial morphology were used: few-layer (below 10-layer) GO1, O < 49%; predominantly single-layer GO2, O = 41-50%; 15-20-layer GO3, O < 11%; and few-layer (below 10-layer) NH4 +-functionalized GO4, O < 44%, N = 3-6%. The aqueous GO dispersions, sonicated and stabilized with bovine serum albumin in Krebs-Henseleit-like solution-uniformized in terms of the particle size-were eventually size-monodisperse as revealed by dynamic light scattering. To study the cardiotoxicity mechanisms of GO, histopathology, Raman spectroscopy, analysis of cardiac parameters (coronary and aortic flows, heart rate, aortic pressure), and nitric oxide (NO-)-dependent coronary flow response to bradykinin (blood-vessel-vasodilator) were used. GO1 (10 mg/L) exerted no effects on cardiac function and preserved an increase in coronary flow in response to bradykinin. GO2 (10 mg/L) reduced coronary flow, aortic pressure in normotensive hearts, and coronary flow in hypertensive hearts, and intensified the response to bradykinin in normal hearts. GO3 (10 mg/L) reduced all parameters in hypertensive hearts and coronary response to bradykinin in normal hearts. At higher concentrations (normotensive hearts, 30 mg/L), the coronary response to bradykinin was blocked. GO4 (10 mg/L) reduced the coronary flow in normal hearts, while for hypertensive hearts, all parameters, except the coronary flow, were reduced and the coronary response to bradykinin was blocked. The results showed that a low number of GO layers and high O-content were safer for normal and hypertensive rat hearts. Hypertensive hearts deteriorated easier upon perfusion with low-O-content GOs. Our findings support the necessity of strict control over the GO structure during organ perfusion and indicate the urgent need for personalized medicine in biomedical applications of GO.

The cytocompatibility of graphene oxide as a platform to enhance the effectiveness and safety of silver nanoparticles through in vitro studies

The increasing emergence of antibiotic-resistant bacteria and the need to reduce the use of antibiotics call for the development of safe alternatives, such as silver nanoparticles. However, their potential cytotoxic effect needs to be addressed. Graphene oxide provides a large platform that can increase the effectiveness and safety of silver nanoparticles. Graphene oxide and silver nanoparticles complex applied as a part of an innovative material might have direct contact with human tissues, such as skin, or might be inhaled from aerosol or exfoliated pieces of the complex. Thereby, the safety of the prepared complex has to be evaluated carefully, employing a range of methods. We demonstrated the high cytocompatibility of graphene oxide and the graphene oxide-silver nanoparticles complex toward human cell lines, fetal foreskin fibroblasts (HFFF2), and lung epithelial cells (A549). The supporting platform of graphene oxide also neutralized the slight toxicity of bare silver nanoparticles. Finally, in studies on Staphylococcus aureus and Pseudomonas aeruginosa, the number of bacteria reduction was observed after incubation with silver nanoparticles and the graphene oxide-silver nanoparticles complex. Our findings confirm the possibility of employing a graphene oxide-silver nanoparticles complex as a safe agent with reduced silver nanoparticles' cytotoxicity and antibacterial properties.

Graphene Oxide Decreases Pro-Inflammatory Proteins Production in Skeletal Muscle Cells Exposed to SARS-CoV-2 Spike Protein

Aim

The experiments aimed to document the presence of the ACE2 receptor on human muscle cells and the effects of the interaction of these cells with the spike protein of the SARS-CoV-2 virus in terms of induction of pro-inflammatory proteins, as well as to assess the possibility of reducing the pool of these proteins with the use of graphene oxide (GO) flakes.

Methods

Human Skeletal Myoblast (HSkM), purchased from Gibco were maintained in standard condition according to the manufacturer's instruction. The cells were divided into 4 groups; 1. C-control, 2. S-with addition of spike protein, 3. GO-with the addition of graphene oxide, 4. GO-S-with addition of GO followed by the addition of S protein. Protein S (PX-COV-P049) was purchased from ProteoGenix (France). GO was obtained from Advanced Graphene Products (Zielona Gora, Poland). The influence of all the factors on the morphology of cells was investigated using light and confocal microscopy. ACE2 protein expression on muscle cells was visualized and 40 pro-inflammatory cytokines were investigated using the membrane antibody array method. The protein profile of the lysate of cells from individual groups was also analyzed by mass spectrometry.

Conclusion

The experiments confirmed the presence of the ACE2 receptor in human skeletal muscle cells. It has also been documented that the SARS-CoV-2 virus spike protein influences the activation of selected pro-inflammatory proteins that promote cytokine storm and oxidative stress in muscle cells. The use of low levels of graphene oxide does not adversely affect muscle cells, reducing the levels of most proteins, including pro-inflammatory proteins. It can be assumed that GO may support anti-inflammatory therapy in muscles by scavenging proteins that activate cytokine storm.

Influence of the properties of different graphene-based nanomaterials dispersed in polycaprolactone membranes on astrocytic differentiation

Composites of polymer and graphene-based nanomaterials (GBNs) combine easy processing onto porous 3D membrane geometries due to the polymer and cellular differentiation stimuli due to GBNs fillers. Aiming to step forward to the clinical application of polymer/GBNs composites, this study performs a systematic and detailed comparative analysis of the influence of the properties of four different GBNs: (i) graphene oxide obtained from graphite chemically processes (GO); (ii) reduced graphene oxide (rGO); (iii) multilayered graphene produced by mechanical exfoliation method (G_mec); and (iv) low-oxidized graphene via anodic exfoliation (G_anodic); dispersed in polycaprolactone (PCL) porous membranes to induce astrocytic differentiation. PCL/GBN flat membranes were fabricated by phase inversion technique and broadly characterized in morphology and topography, chemical structure, hydrophilicity, protein adsorption, and electrical properties. Cellular assays with rat C6 glioma cells, as model for cell-specific astrocytes, were performed. Remarkably, low GBN loading (0.67 wt%) caused an important difference in the response of the C6 differentiation among PCL/GBN membranes. PCL/rGO and PCL/GO membranes presented the highest biomolecule markers for astrocyte differentiation. Our results pointed to the chemical structural defects in rGO and GO nanomaterials and the protein adsorption mechanisms as the most plausible cause conferring distinctive properties to PCL/GBN membranes for the promotion of astrocytic differentiation. Overall, our systematic comparative study provides generalizable conclusions and new evidences to discern the role of GBNs features for future research on 3D PCL/graphene composite hollow fiber membranes for in vitro neural models.

Protein spot arrays on graphene oxide coatings for efficient single-cell capture

Biomedical applications such as cell screening or cell–cell interaction studies require placement and adhesion of cells on surfaces with controlled numbers and location. In particular, single-cell arraying and positioning has come into focus as a basis of such applications. An ideal substrate would combine biocompatibility with favorable attributes such as pattern stability and easy processing. Here, we present a simple yet effective approach to single-cell arraying based on a graphene oxide (GO) surface carrying protein (fibronectin) microarrays to define cell adhesion points. These capture NIH-3T3 cells, resulting in cell arrays, which are benchmarked against analogous arrays on silanized glass samples. We reveal significant improvement in cell-capture performance by the GO coating with regards to overall cell adhesion and single-cell feature occupancy. This overall improvement of cell-arraying combined with retained transparency of substrate for microscopy and good biocompatibility makes this graphene-based approach attractive for single-cell experiments.

Preliminary In Vitro Cytotoxicity, Mutagenicity and Antitumoral Activity Evaluation of Graphene Flake and Aqueous Graphene Paste

This study aimed to determine the in vitro cytotoxicity and mutagenicity of graphene flake (GF) and aqueous graphene paste (AGP) in order to evaluate their potential for application as biomaterials. Furthermore, their antitumor activity against adherent and suspended cells, namely, human breast adenocarcinoma cells (MDA-MB-231), and human monocytes from histiocytic lymphoma (U-937), was investigated. The results demonstrated that GF reduced the viability and proliferation of NIH3T3 immortalized murine fibroblasts for concentrations >0.8 µg/mL and incubation times of 48 and 72 h. AGP showed no toxic effects in any of the tested concentrations and incubation times. The same results were obtained for MDA-MB-231 cells. The viability of the U-937 cells was not affected by either GF or AGP. The Ames test showed that GF and AGP were not genotoxic against Salmonella typhimurium strains TA98 and TA100, with and without metabolic activation. The present study demonstrated good in vitro cellular compatibility of GF and AGP and. Among these, AGP was the best material as it did not interfere, at any of the tested concentrations, with cell viability and proliferation for up to 72 h of incubation. In any case, neither material induced alterations to cell morphology and were not mutagenic.

Interaction of graphene oxide with lysozyme:Insights from conformational structure and surface charge investigations

Lysozyme (Lyz) is an important antibacterial protein that exists widely in nature. In recent years, the application of graphene oxide (GO) in the field of biotechnology electronics, optics, chemistry and energy storage has been extensively studied. However, due to the unique properties of GO, the mechanism of its interaction with biomacromolecule proteins is very complex. To further explore the interaction between GO and proteins we explore the influence of different pH and heat treatment conditions on the interaction between GO and Lyz, the GO (0-20 μg/mL) was added at a fixed Lyz concentration (0.143 mg/mL) under different pHs. The structure and surface charge changes of Lyz were measured by spectroscopic analysis and zeta potential. The results showed that the interaction between GO and Lyz depends on temperature and pH, significant changes have taken place in its tertiary and secondary structures. By analyzing the UV absorption spectrum, it was found that lysozyme and GO formed a stable complex, and the conformation of the enzyme was changed. In acidic pH conditions (i.e., pH < pI), a high density of Lyz were found to adsorb on the GO surface, whereas an increase in pH resulted in a progressive decrease in the density of the adsorbed Lyz. This pH-dependent adsorption is ascribed to the electrostatic interactions between the negatively charged GO surface and the tunable ionization of the Lyz molecules. The secondary structure of Lyz adsorbed on GO was also found to be highly dependent on the pH. In this paper, we investigated the exact mechanism of pH-influenced GO binding to lysozyme, which has important guidance significance for the potential toxicity of GO biology and its applications in biomedical fields such as structure-based drug design.

Graphene oxide links alterations of anti-viral signaling pathways with lipid metabolism via suppressing TLR3 in vascular smooth muscle cells

Vascular smooth muscle cells (VSMCs), the main cells constructing blood vessels, are important in the regulation of the pathophysiology of vascular systems; however, relatively few studies have investigated the influence of nanomaterials (NMs) on VSMCs.

Preparation, properties and application of graphene-based materials in tissue engineering scaffolds

Tissue engineering has great application prospect as an effective treatment for tissue and organ injury, functional reduction or loss. Bioactive tissues are reconstructed and damaged organs are repaired by the three elements including cells, scaffold materials and growth factors. Graphene-based composites can be used as reinforcing auxiliary materials for tissue scaffold preparation because of their large specific surface area, and good mechanical support. Tissue engineering scaffolds with graphene-based composites have been widely studied. Part of research have focused on the application of graphene-based composites in single tissue engineering; The basic principles of graphene materials used in tissue engineering are summarized in some researches. Some studies emphasized the key problems and solutions urgently needed to be solved in the development of tissue engineering, and discussed their application prospect. Some related studies mainly focused on the conductivity of graphene, and discussed the application of electroactive scaffolds in tissue engineering. In this review, the composite materials for preparing tissue engineering scaffolds are briefly described, which emphasizes the preparation methods, biological properties and practical applications of graphene-based composite scaffolds. The synthetic techniques with stressing solvent casting, electrospinning and 3D printing are introduced in detail. The mechanical, cell-oriented and biocompatible properties of graphene-based composite scaffolds in tissue engineering are analyzed and summarized. Their applications in bone tissue engineering, nerve tissue engineering, cardiovascular tissue engineering and other tissue engineering are summarized systematically. In addition, this work also looks forward to the difficulties and challenges in the future research, providing some references for the follow-up research of graphene-based composites in tissue engineering scaffolds.

A comparative study of toxicity of graphdiyne and graphene oxide to human umbilical vein endothelial cells

The success of graphene oxide (GO) has attracted extensive research interests in developing novel 2D nanomaterials (NMs). Graphdiyne (GDY) is a new member of carbon-based 2D NMs possessing sp- and sp² -hybridized carbon atoms. However, the toxicity of GDY is less investigated as GO. In this study, we compared the toxicity of GDY and GO with human umbilical vein endothelial cells (HUVECs). Exposure to up to 100-μg/ml GDY and GO induced cytotoxicity, but there was no statistically significant difference between GDY and GO. At noncytotoxic concentration, 25-μg/ml GDY or GO led to the internalization of NMs, typically in cytoplasm but not in nuclei. Only GO but not GDY significantly increased THP-1 adhesion onto NM-exposed HUVECs. Meanwhile, compared with GDY, GO more effectively promoted the release of soluble intracellular cell adhesion molecule-1 (sICAM-1), indicating the differential effects of GDY and GO on endothelial activation. Neither GDY nor GO induced intracellular superoxide. However, GO significantly promoted the expression of endoplasmic reticulum (ER) stress genes activating transcription factor 4 (ATF4) and X-box binding protein 1 spliced (XBP-1s), as well pyroptosis genes NLR family pyrin domain containing 3 (NLRP3) and gasdermin D (GSDMD), whereas GDY did not show this effect. The results suggested that GDY and GO could be internalized into HUVECs leading to cytotoxic effects. However, GO was more potent to activate endothelial activation probably due to the activation of ER stress and pyroptosis genes.