A simplified approach for the determination of fitting constants in Oliver-Pharr method regarding biological samples

Morphology and Properties of Mg2Si Phase Modified by Pb in As-Cast Mg-2.5Si-xPb Alloys

Pb plays an important role in determining the morphologies and mechanical properties of the Mg2Si phase in Mg-2.5Si-xPb alloys. As the amount of Pb increases from 0.4 wt.% to 1 wt.%, the primary Mg2Si phase is refined during solidification. Its morphologies transform from equiaxed-dendrite to polygonal and finally to roughly circular. The key reason for morphology evolution is the preferential adsorption of Pb atoms on Mg2Si {100} surfaces to suppress the growth rate along the ⟨100⟩ directions, which is demonstrated by the adsorption model based on first principles. In addition, the hardness of the Mg2Si phase decreases with the increasing solution content of Pb according to the results of the nanoindentation. With the addition of Pb at 1 wt.%, Pb content in the primary Mg2Si phase reaches a maximum of 0.4 wt.%, and the hardness of the primary Mg2Si phase reaches a minimum of 3.64 GPa. This reduction in hardness is attributed to the augmented ionic bond ratio resulting from the solution of Pb, which concurrently enhances the toughness of the Mg2Si phase.

Atomic Force Microscopy Nanoindentation Method on Collagen Fibrils

Atomic Force Microscopy nanoindentation method is a powerful technique that can be used for the nano-mechanical characterization of bio-samples. Significant scientific efforts have been performed during the last two decades to accurately determine the Young’s modulus of collagen fibrils at the nanoscale, as it has been proven that mechanical alterations of collagen are related to various pathological conditions. Different contact mechanics models have been proposed for processing the force–indentation data based on assumptions regarding the shape of the indenter and collagen fibrils and on the elastic or elastic–plastic contact assumption. However, the results reported in the literature do not always agree; for example, the Young’s modulus values for dry collagen fibrils expand from 0.9 to 11.5 GPa. The most significant parameters for the broad range of values are related to the heterogeneous structure of the fibrils, the water content within the fibrils, the data processing errors, and the uncertainties in the calibration of the probe. An extensive discussion regarding the models arising from contact mechanics and the results provided in the literature is presented, while new approaches with respect to future research are proposed.

How did correlative atomic force microscopy and super-resolution microscopy evolve in the quest for unravelling enigmas in biology?

With the invention of the Atomic Force Microscope (AFM) in 1986 and the subsequent developments in liquid imaging and cellular imaging it became possible to study the topography of cellular specimens under nearly physiological conditions with nanometric resolution. The application of AFM to biological research was further expanded with the technological advances in imaging modes where topographical data can be combined with nanomechanical measurements, offering the possibility to retrieve the biophysical properties of tissues, cells, fibrous components and biomolecules. Meanwhile, the quest for breaking the Abbe diffraction limit restricting microscopic resolution led to the development of super-resolution fluorescence microscopy techniques that brought the resolution of the light microscope comparable to the resolution obtained by AFM. The instrumental combination of AFM and optical microscopy techniques has evolved over the last decades from integration of AFM with bright-field and phase-contrast imaging techniques at first to correlative AFM and wide-field fluorescence systems and then further to the combination of AFM and fluorescence based super-resolution microscopy modalities. Motivated by the many developments made over the last decade, we provide here a review on AFM combined with super-resolution fluorescence microscopy techniques and how they can be applied for expanding our understanding of biological processes.

A New Approach for the AFM-Based Mechanical Characterization of Biological Samples

The AFM nanoindentation technique is a powerful tool for the mechanical characterization of biological samples at the nanoscale. The data analysis of the experimentally obtained results is usually performed using the Hertzian contact mechanics. However, the aforementioned theory can be applied only in cases that the sample is homogeneous and isotropic and presents a linear elastic response. However, biological samples often present depth-dependent mechanical properties, and the Hertzian analysis cannot be used. Thus, in this paper, a different approach is presented, based on a new physical quantity used for the determination of the mechanical properties at the nanoscale. The aforementioned physical quantity is the work done by the indenter per unit volume. The advantages of the presented analysis are significant since the abovementioned magnitude can be used to examine if a sample can be approximated to an elastic half-space. If this approximation is valid, then the new proposed method enables the accurate calculation of Young's modulus. Additionally, it can be used to explore the mechanical properties of samples that are characterized by a depth-dependent mechanical behavior. In conclusion, the proposed analysis presents an accurate yet simple technique for the determination of the mechanical properties of biological samples at the nanoscale that can be also used beyond the Hertzian limit.