1
|
Zi P, Xu K, Chen J, Wang C, Zhang T, Luo Y, Tian Y, Wen L, Ding X. Intelligent Rock-Climbing Robot Capable of Multimodal Locomotion and Hybrid Bioinspired Attachment. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024:e2309058. [PMID: 39007178 DOI: 10.1002/advs.202309058] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/23/2023] [Revised: 04/20/2024] [Indexed: 07/16/2024]
Abstract
Rock-climbing robots have significant potential in fieldwork and planetary exploration. However, they currently face limitations such as a lack of stability and adaptability on extreme terrains, slow locomotion, and single functionality. This study introduces a novel multimodal and adaptive rock-climbing robot (MARCBot), which addresses these limitations through spiny grippers that draw inspiration from morpho-functionalities observed in beetles, arboreal birds, and hoofed animals. This hybrid bioinspired design enables high attachment strength, passive adaptability to different terrains, and quick attachment on rock surfaces. The multimodal functionality of the gripper allows for attachment during climbing and support during walking. A novel control strategy using dynamics and quadratic programming (QP) optimizes attachment wrench distribution, reducing cost-of-transport by 20.03% and 6.05% compared to closed-loop inverse kinematic (CLIK) and virtual model control (VMC) methods, respectively. MARCBot achieved climbing speeds of 0.15 m min-1 on a vertical discrete rock surface under gravity and trotting speeds of up to 0.21 m s-1 on various complex terrains. It is the first robot capable of climbing on rock surfaces and trotting in complex terrains without the need for switching end-effectors. This study highlights significant advancements in climbing and multimodal locomotion for robots in extreme environments.
Collapse
Affiliation(s)
- Peijin Zi
- School of Mechanical Engineering and Automation, Beihang University, Beijing, 100191, China
| | - Kun Xu
- School of Mechanical Engineering and Automation, Beihang University, Beijing, 100191, China
| | - Jiawei Chen
- School of Mechanical Engineering and Automation, Beihang University, Beijing, 100191, China
| | - Chang Wang
- School of Mechanical Engineering and Automation, Beihang University, Beijing, 100191, China
| | - Tao Zhang
- School of Mechanical Engineering and Automation, Beihang University, Beijing, 100191, China
- School of Electro-mechanical Engineering, Guangdong University of Technology, Guangzhou, 510006, China
| | - Yang Luo
- School of Mechanical Engineering and Automation, Beihang University, Beijing, 100191, China
| | - Yaobin Tian
- School of Mechanical Engineering and Automation, Beihang University, Beijing, 100191, China
| | - Li Wen
- School of Mechanical Engineering and Automation, Beihang University, Beijing, 100191, China
| | - Xilun Ding
- School of Mechanical Engineering and Automation, Beihang University, Beijing, 100191, China
| |
Collapse
|
2
|
Reversible Adhesive Bio-Toe with Hierarchical Structure Inspired by Gecko. Biomimetics (Basel) 2023; 8:biomimetics8010040. [PMID: 36648826 PMCID: PMC9844372 DOI: 10.3390/biomimetics8010040] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/31/2022] [Revised: 01/12/2023] [Accepted: 01/13/2023] [Indexed: 01/18/2023] Open
Abstract
The agile locomotion of adhesive animals is mainly attributed to their sophisticated hierarchical feet and reversible adhesion motility. Their structure-function relationship is an urgent issue to be solved to understand biologic adhesive systems and the design of bionic applications. In this study, the reversible adhesion/release behavior and structural properties of gecko toes were investigated, and a hierarchical adhesive bionic toe (bio-toe) consisting of an upper elastic actuator as the supporting/driving layer and lower bionic lamellae (bio-lamellae) as the adhesive layer was designed, which can adhere to and release from targets reversibly when driven by bi-directional pressure. A mathematical model of the nonlinear deformation and a finite element model of the adhesive contact of the bio-toe were developed. Meanwhile, combined with experimental tests, the effects of the structure and actuation on the adhesive behavior and mechanical properties of the bio-toe were investigated. The research found that (1) the bending curvature of the bio-toe, which is approximately linear with pressure, enables the bio-toe to adapt to a wide range of objects controllably; (2) the tabular bio-lamella could achieve a contact rate of 60% with a low squeeze contact of less than 0.5 N despite a ±10° tilt in contact posture; (3) the upward bending of the bio-toe under negative pressure provided sufficient rebounding force for a 100% success rate of release; (4) the ratio of shear adhesion force to preload of the bio-toe with tabular bio-lamellae reaches approximately 12, which is higher than that of most existing adhesion units and frictional gripping units. The bio-toe shows good adaptability, load capacity, and reversibility of adhesion when applied as the basic adhesive unit in a robot gripper and wall-climbing robot. Finally, the proposed reversible adhesive bio-toe with a hierarchical structure has great potential for application in space, defense, industry, and daily life.
Collapse
|
3
|
A Spiny Climbing Robot with Dual-Rail Mechanism. Biomimetics (Basel) 2023; 8:biomimetics8010014. [PMID: 36648800 PMCID: PMC9844293 DOI: 10.3390/biomimetics8010014] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/29/2022] [Revised: 12/26/2022] [Accepted: 12/28/2022] [Indexed: 01/03/2023] Open
Abstract
Easy detachment is as important as reliable an attachment to climbing robots in achieving stable climbing on vertical surfaces. To deal with the difficulty of detachment occurring in wheeled and track-type climbing robots using bio-inspired spines, a novel climbing robot utilizing spiny track and dual-rail mechanism is proposed in this paper. The spiny track consists of dozens of spiny feet, and the movement of each spiny foot is guided by the specially designed dual-rail mechanism to achieve reliable attachment and easy detachment. First, the design of the climbing robot and the dual-rail mechanism are presented. Then, the dual-rail model is constructed to analyze the attaching and detaching movements of the spiny feet, and a mechanical model is established to analyze the force distribution on the spiny track. Finally, a robot prototype is developed, and the analysis results are verified by the experiment results. Experiments on the prototype demonstrated that it could climb on various rough vertical surfaces at a speed of 36 mm/s, including sandpaper, brick surfaces, concrete walls with pebbles, and coarse stucco walls.
Collapse
|
4
|
Zhu Y, Manoonpong P, Hu Q. Editorial: Multimodal behavior from animals to bio-inspired robots. Front Neurorobot 2023; 17:1160549. [PMID: 36895507 PMCID: PMC9989309 DOI: 10.3389/fnbot.2023.1160549] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/07/2023] [Accepted: 02/10/2023] [Indexed: 02/23/2023] Open
Affiliation(s)
- Yaguang Zhu
- State Key Laboratory of Robotics and Systems (HIT), Harbin, China.,The Key Laboratory of Road Construction Technology and Equipment of MOE, Chang'an University, Xi'an, China
| | - Poramate Manoonpong
- Bio-Inspired Robotics and Neural Engineering Laboratory, School of Information Science and Technology, Vidyasirimedhi Institute of Science and Technology, Rayong, Thailand.,Embodied AI and Neurorobotics Laboratory, SDU Biorobotics, The Mærsk Mc-Kinney Møller Institute, University of Southern Denmark, Odense, Denmark
| | - Qiao Hu
- School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an, China
| |
Collapse
|
5
|
MoCLORA-An Architecture for Legged-and-Climbing Modular Bio-Inspired Robotic Organism. Biomimetics (Basel) 2022; 8:biomimetics8010011. [PMID: 36648797 PMCID: PMC9844317 DOI: 10.3390/biomimetics8010011] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/18/2022] [Revised: 12/19/2022] [Accepted: 12/21/2022] [Indexed: 12/28/2022] Open
Abstract
MoCLORA (Modular Climbing-and-Legged Robotic Organism Architecture) is a software framework for climbing bio-inspired robotic organisms composed of modular robots (legs). It is presented as a modular low-level architecture that coordinates the modules of an organism with any morphology, at the same time allowing exchanges between the physical robot and its digital twin. It includes the basic layers to control and coordinate all the elements, while allowing adding new higher-level components to improve the organism's behavior. It is focused on the control of both the body and the legs of the organism, allowing for position and velocity control of the whole robot. Similarly to insects, which are able to adapt to new situations after the variation on the capacity of any of their legs, MoCLORA allows the control of organisms composed of a variable number of modules, arranged in different ways, giving the overall system the versatility to tackle a wide range of tasks in very diverse environments. The article also presents ROMERIN, a modular climbing and legged robotic organism, and its digital twin, which allows the creation of different module arrangements for testing. MoCLORA has been tested and validated with both the physical robot and its digital twin.
Collapse
|
6
|
Zang G, Dai Z, Manoonpong P. The Roles and Comparison of Rigid and Soft Tails in Gecko-Inspired Climbing Robots: A Mini-Review. Front Bioeng Biotechnol 2022; 10:900389. [PMID: 35910016 PMCID: PMC9335492 DOI: 10.3389/fbioe.2022.900389] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/20/2022] [Accepted: 06/07/2022] [Indexed: 11/13/2022] Open
Abstract
Geckos use millions of dry bristles on their toes to adhere to and rapidly run up walls and across ceilings. This has inspired the successful development of dry adhesive materials and their application to climbing robots. The tails of geckos also help realize adaptive and robust climbing behavior. Existing climbing robots with gecko-inspired tails have demonstrated improved locomotion performance. However, few studies have focused on the role of a robot’s gecko-inspired tail when climbing a sloped surface and its effects on the overall locomotion performance. Thus, this paper reviews and analyzes the roles of the tails of geckos and robots in terms of their climbing performances and compares the advantages and disadvantages of robots’ tails made of rigid and soft materials. This review could assist roboticists decide whether a tail is required for their robots and which materials and motion types to use for the tail in order to fulfill their desired functions and even allow the robots to adapt to different environments and tasks.
Collapse
Affiliation(s)
- Guangyuan Zang
- Institute of Bio-inspired Structure and Surface Engineering, College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China
- *Correspondence: Guangyuan Zang, ; Poramate Manoonpong,
| | - Zhendong Dai
- Institute of Bio-inspired Structure and Surface Engineering, College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China
| | - Poramate Manoonpong
- Institute of Bio-inspired Structure and Surface Engineering, College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China
- Bio-inspired Robotics and Neural Engineering Lab, School of Information Science and Technology, Vidyasirimedhi Institute of Science and Technology, Rayong, Thailand
- *Correspondence: Guangyuan Zang, ; Poramate Manoonpong,
| |
Collapse
|