Design and kinematic of a dexterous bioinspired elephant trunk robot with variable diameter

Performance enhancement of the soft robotic segment for a trunk-like arm

Trunk-like continuum robots have wide applications in manipulation and locomotion. In particular, trunk-like soft arms exhibit high dexterity and adaptability very similar to the creatures of the natural world. However, owing to the continuum and soft bodies, their performance in payload and spatial movements is limited. In this paper, we investigate the influence of key design parameters on robotic performance. It is verified that a larger workspace, lateral stiffness, payload, and bending moment could be achieved with adjustments to soft materials' hardness, the height of module segments, and arrayed radius of actuators. Especially, a 55% increase in arrayed radius would enhance the lateral stiffness by 25% and a bending moment by 55%. An 80% increase in segment height would enlarge 112% of the elongation range and 70 % of the bending range. Around 200% and 150% increments in the segment's lateral stiffness and payload forces, respectively, could be obtained by tuning the hardness of soft materials. These relations enable the design customization of trunk-like soft arms, in which this tapering structure ensures stability via the stocky base for an impact reduction of 50% compared to that of the tip and ensures dexterity of the long tip for a relatively larger bending range of over 400% compared to that of the base. The complete methodology of the design concept, analytical models, simulation, and experiments is developed to offer comprehensive guidelines for trunk-like soft robotic design and enable high performance in robotic manipulation.

A bioinspired fishbone continuum robot with rigid-flexible-soft coupling structure

Rigid-flexible-soft coupled robots are an important development direction of robotics, which face many theoretical and technical challenges in their design, manufacture, and modeling. Inspired by fishbones, we propose a novel cable-driven single-backbone continuum robot which has a compact structure, is lightweight, and has high dexterity. In contrast to the existing single-backbone continuum robots, the middle backbone of the continuum robot is serially formed by multiple cross-arranged bioinspired fishbone units. The proposed bioinspired fishbone unit, having good one-dimensional bending properties, is a special rigid-flexible-soft structure mainly made by multi-material 3D printing technology. The unique design and manufacture of the middle backbone provide the continuum robot with excellent constant curvature characteristics and reduce the coupling between different motion dimensions, laying a foundation for the continuum robot to have a more accurate theoretical model as well as regular and controllable deformation. Moreover, we build the forward and inverse kinematics model based on the geometric analysis method, and analyze its workspace. Further, the comparison between the experimental and theoretical results shows that the prediction errors of the kinematics model are within the desired 0.5 mm. Also, we establish the relation between the cable driving force of the bioinspired fishbone unit and its bending angle, which can provide guidance for the optimization of the continuum robot in the future. The application demos prove that the continuum robot has good dexterity and compliance, and can perform tasks such as obstacle crossing locomotion and narrow space transportation. This work provides new ideas for the bioinspired design and high-precision modeling of continuum robots.