Tooth regeneration: challenges and opportunities for biomedical material research

Current Trends, Advances, and Challenges of Tissue Engineering-Based Approaches of Tooth Regeneration: A Review of the Literature

INTRODUCTION

Tooth loss is a significant health issue. Currently, this situation is often treated with the use of synthetic materials such as implants and prostheses. However, these treatment modalities do not fully meet patients' biological and mechanical needs and have limited longevity. Regenerative medicine focuses on the restoration of patients' natural tissues via tissue engineering techniques instead of rehabilitating with artificial appliances. Therefore, a tissue-engineered tooth regeneration strategy seems like a promising option to treat tooth loss.

OBJECTIVE

This review aims to demonstrate recent advances in tooth regeneration strategies and discoveries about underlying mechanisms and pathways of tooth formation.

RESULTS AND DISCUSSION

Whole tooth regeneration, tooth root formation, and dentin-pulp organoid generation have been achieved by using different seed cells and various materials for scaffold production. Bioactive agents are critical elements for the induction of cells into odontoblast or ameloblast lineage. Some substantial pathways enrolled in tooth development have been figured out, helping researchers design their experiments more effectively and aligned with the natural process of tooth formation.

CONCLUSION

According to current knowledge, tooth regeneration is possible in case of proper selection of stem cells, appropriate design and manufacturing of a biocompatible scaffold, and meticulous application of bioactive agents for odontogenic induction. Understanding innate odontogenesis pathways play a crucial role in accurately planning regenerative therapeutic interventions in order to reproduce teeth.

Dental resin composites with improved antibacterial and mineralization properties via incorporating zinc/strontium-doped hydroxyapatite as functional fillers

This study intends to improve the antibacterial and mineralization performance of photocurable dental resin composites (DRCs) to reduce the possibility of repair failure caused by secondary caries. To the end, functionalized hydroxyapatite (HAp), including Zn-doped (Zn/HAp) and Sr-doped HAp (Sr/HAp), were added into the bisphenol A glycidyl methacrylate and triethylene glycol dimethacrylate mixture, providing the DRCs with antibacterial and mineralization capacity, respectively. By controlling the total amount of inorganic filler at 70 wt%, these HAp powders were introduced into the resin matrix with barium glass powder (BaGP), while the ratios of HAp to aGP varied from 0:70 to 8:62. And the 8 wt% of HAp could be pure HAp, Zn/HAp, Sr/HAp, or Zn/HAp +Sr/HAp in different ratios (i.e. 2:6, 4:4, 6:2). Though the fillers varied, the obtained DRCs displayed similar micro-morphology, flexural strength (∼110 MPa) and modulus (∼7 GPa), and Vickers hardness (∼65). When the doping amounts of Sr²⁺/Zn²⁺reached 15 mol% of Ca²⁺in the Sr/HAp and Zn/HAp, the DRCs displayed a high antibacterial activity by killing ∼95%Staphylococcus aureus, and induced rich mineral deposition on surface in simulated body fluid. The incorporation of the Zn/HAp and Sr/HAp into the DRCs did not cause significant cytotoxicity, with L929 fibroblasts remaining >99% viability as cultured in extracts made from the DRCs. Therein, the DRC preparations containing both Zn/HAp and Sr/HAp have achieved improvements in both the biomineralization and antibacterial performance, as well as, having sufficient mechanical properties and excellent biocompatibility for dental restoration.

Clinical Potential of Dental Pulp Stem Cells in Pulp Regeneration: Current Endodontic Progress and Future Perspectives

Dental caries is a common disease that not only destroys the rigid structure of the teeth but also causes pulp necrosis in severe cases. Once pulp necrosis has occurred, the most common treatment is to remove the damaged pulp tissue, leading to a loss of tooth vitality and increased tooth fragility. Dental pulp stem cells (DPSCs) isolated from pulp tissue exhibit mesenchymal stem cell-like characteristics and are considered ideal candidates for regenerating damaged dental pulp tissue owing to their multipotency, high proliferation rate, and viability after cryopreservation. Importantly, DPSCs do not elicit an allogeneic immune response because they are non-immunogenic and exhibit potent immunosuppressive properties. Here, we provide an up-to-date review of the clinical applicability and potential of DPSCs, as well as emerging trends in the regeneration of damaged pulp tissue. In addition, we suggest the possibility of using DPSCs as a resource for allogeneic transplantation and provide a perspective for their clinical application in pulp regeneration.

Tissue Engineering Approaches for Enamel, Dentin, and Pulp Regeneration: An Update

Stem/progenitor cells are undifferentiated cells characterized by their exclusive ability for self-renewal and multilineage differentiation potential. In recent years, researchers and investigations explored the prospect of employing stem/progenitor cell therapy in regenerative medicine, especially stem/progenitor cells originating from the oral tissues. In this context, the regeneration of the lost dental tissues including enamel, dentin, and the dental pulp are pivotal targets for stem/progenitor cell therapy. The present review elaborates on the different sources of stem/progenitor cells and their potential clinical applications to regenerate enamel, dentin, and the dental pulpal tissues.

A Graded Multifunctional Hybrid Scaffold with Superparamagnetic Ability for Periodontal Regeneration

The regeneration of dental tissues is a still an unmet clinical need; in fact, no therapies have been completely successful in regenerating dental tissue complexes such as periodontium, which is also due to the lack of scaffolds that are able to guide and direct cell fate towards the reconstruction of different mineralized and non-mineralized dental tissues. In this respect, the present work develops a novel multifunctional hybrid scaffold recapitulating the different features of alveolar bone, periodontal ligament, and cementum by integrating the biomineralization process, and tape casting and electrospinning techniques. The scaffold is endowed with a superparamagnetic ability, thanks to the use of a biocompatible, bioactive superparamagnetic apatite phase, as a mineral component that is able to promote osteogenesis and to be activated by remote magnetic signals. The periodontal scaffold was obtained by engineering three different layers, recapitulating the relevant compositional and microstructural features of the target tissues, into a monolithic multifunctional graded device. Physico-chemical, morphological, and ultrastructural analyses, in association with preliminary in vitro investigations carried out with mesenchymal stem cells, confirm that the final scaffold exhibits a good mimicry of the periodontal tissue complex, with excellent cytocompatibility and cell viability, making it very promising for regenerative applications in dentistry.

Microwave-assisted synthesis and evaluation of type 1 collagen-apatite composites for dental tissue regeneration

The aim was to develop an economical and biocompatible collagen-based bioactive composite for tooth regeneration. Acid-soluble collagen was extracted and purified from fish scales. The design was innovated to molecularly tailor the surface charge sites of the nano-apatite providing chemical bonds with the collagen matrix via microwave irradiation technique. The obtained collagen was identified by sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis. The composites were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis/differential scanning calorimetry, and scanning electron microscopy. MC3T3-E1 cell lines were used to assess the biological effects of these materials by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetra zolium bromide (MTT) assay. Indirect contact test was performed by extracting representative elutes in cell culture media and sulforhodamine B analysis was performed. Chorioallantoic membrane assay was conducted to define the new vessels formation behavior. The purity of collagen extracts was determined and showed two α-chains, i.e. the characteristic of type I collagen. Fourier transform infrared spectroscopy showed the characteristic peaks for amide I, I, III, and phosphate for collagen and composites. Scanning electron microscopy images showed three-dimensional mesh of collagen/apatite nano-fibers. Nontoxic behavior of composites was observed and there were graded and dose-related effects on experimental compounds. The angiogenesis and vessels formation behavior were observed in bioactive collagen composite. The obtained composites have potential to be used for tooth structure regeneration.

Biomimetic Scaffold with Aligned Microporosity Designed for Dentin Regeneration

Tooth loss is a common result of a variety of oral diseases due to physiological causes, trauma, genetic disorders, and aging and can lead to physical and mental suffering that markedly lowers the individual's quality of life. Tooth is a complex organ that is composed of mineralized tissues and soft connective tissues. Dentin is the most voluminous tissue of the tooth and its formation (dentinogenesis) is a highly regulated process displaying several similarities with osteogenesis. In this study, gelatin, thermally denatured collagen, was used as a promising low-cost material to develop scaffolds for hard tissue engineering. We synthetized dentin-like scaffolds using gelatin biomineralized with magnesium-doped hydroxyapatite and blended it with alginate. With a controlled freeze-drying process and alginate cross-linking, it is possible to obtain scaffolds with microscopic aligned channels suitable for tissue engineering. 3D cell culture with mesenchymal stem cells showed the promising properties of the new scaffolds for tooth regeneration. In detail, the chemical-physical features of the scaffolds, mimicking those of natural tissue, facilitate the cell adhesion, and the porosity is suitable for long-term cell colonization and fine cell-material interactions.

Craniofacial bone tissue engineering

There are numerous conditions, such as trauma, cancer, congenital malformations, and progressive deforming skeletal diseases, that can compromise the function and architectonics of bones of craniofacial region. The need to develop new approaches for treatment of these disorders arises from the fact that conventional therapeutic strategies face many obstacles and limitations. The use of tissue engineering in regeneration of craniofacial bone structures is a very promising possibility and a great challenge for researchers and practitioners. Developments in stem cell biology and engineering have led to the discovery of different stem cell populations and biodegradable materials with suitable properties. This review summarizes the current achievements in tissue engineering of craniofacial bone, temporomandibular joint, and periodontal ligament.

Regeneration of dentine/pulp-like tissue using a dental pulp stem cell/poly(lactic-co-glycolic) acid scaffold construct in New Zealand white rabbits

With the expanding knowledge of tooth regeneration and biological mechanisms of functional dental tissue repair, current treatment strategies are beginning to give way to evolving fields such as tissue engineering and biomimetics. Dental pulp stem cells were isolated from rabbit teeth and seeded onto scaffolds prepared from 50/50 poly(lactic-co-glycolic acid) polymers using two different porogen particle sizes. These cell/scaffold constructs were then transplanted subcutaneously in the rabbits. The expanded rabbit dental pulp stem cells showed high proliferative and clonogenic capacities as well as the ability to give rise to mineralised-like tissues in vitro in culture flasks and after seeding them onto the scaffolds for 12 days. Histological evaluation of transplanted samples revealed the formation of osteodentine-like structures as well as tubular bilayered structures of vertically aligned parallel tubules resembling tubular-like dentine. Using a tissue engineering approach yielded tissues quite similar to normal dentine/pulp-like tissues that can perhaps be used later on for regenerative endodontic or operative procedures.

Self-assembly of nano-hydroxyapatite on multi-walled carbon nanotubes

Inspired by self-assembly of nano-hydroxyapatite (nHA) on collagen associated with the 67nm periodic microstructure of collagen, we used multi-walled carbon nanotubes (MWCNTs) with approximately 40nm bamboo periodic microstructure as a template for nHA deposition to form a nHA-MWCNT composite. The assembled apatite was analyzed by transmission electron microscopy and scanning electron microscopy. Defects that were analogous to edge dislocations along the carbon nanotubes' multi-walled surfaces were the nucleation sites for nHA after these defects had been functionalized principally into carboxylic groups. Spindle-shaped units consisting of an assembly of near parallel, fibril-like nHA polycrystals were formed and oriented at a certain angle to the long axis of the carbon nanotubes, unlike nHA-collagen in which the nHA is oriented along the longitudinal axis of the collagen molecule. One possible explanation for this difference is that there are more bonds for calcium chelation (-COOH, >CO) on the collagen fibril surface than on the surface of MWCNTs. Spindle-shaped units that are detached from the MWCNT template are able to maintain the ordered parallel structure of the nHA polycrystal fibril. We have thus created a self-assembled hydroxyapatite on MWCNTs.