Evaluation of immunocompatibility of tissue-engineered periosteum

Repair of long bone defects of large size using a tissue-engineered periosteum in a rabbit model

Tissue engineering is a promising approach for bone regeneration. In this study, we aimed to investigate whether tissue engineered periosteum (TEP), which was fabricated by combining osteogenically-induced mesenchymal stem cells (MSCs) with porcine small intestinal submucosa (SIS), could restore long bone defects of large size in rabbits. Twenty-four adult New Zealand white rabbits (NZWRs) were used in the experiments. Long bone defects of large size (30 mm-50 mm; average, 40 mm) were established on both sides of NZWRs' radii. The defects were treated with TEP (Group A), allogeneic deproteinized bone (DPB, Group B), TEP combined with DPB (Group C), and pure SIS (Group D). The healing outcome was evaluated by radiography and histological examination at 4, 8, and 12 weeks post-treatment. The radiographical findings showed that bone defects of large size were all repaired in Groups A, B and C within 12 weeks, whereas Group D (pure SIS group) failed to result in defect healing at 4, 8, and 12 weeks. Although there was some new bone regeneration connecting the allografts and bone ends, as observed under radiographical and histological observations, bone defects of large sizes were restored primarily by structurally allografted DPB within 12 weeks. The TEP groups (Groups A and C) showed partial or total bone regeneration upon histological inspection. Based on 12-week histological examinations, significantly more bone was formed in Group A than Group C (P < 0.05), and both groups formed significantly more bone than in Groups B and D. The results indicated that long bone defects of a large size could be restored by TEP or TEP combined with the DPB scaffold, and such materials provide an alternative approach to resolving pathological bone defects in clinical settings.

Periosteum Mimetic Coating on Structural Bone Allografts via Electrospray Deposition Enhances Repair and Reconstruction of Segmental Defects

Structural bone allograft transplantation remains one of the common strategies for repair and reconstruction of large bone defects. Due to the loss of periosteum that covers the outer surface of the cortical bone, the healing and incorporation of allografts is extremely slow and limited. To enhance the biological performance of allografts, herein, we report a novel and simple approach for engineering a periosteum mimetic coating on the surface of structural bone allografts via polymer-mediated electrospray deposition. This approach enables the coating on allografts with precisely controlled composition and thickness. In addition, the periosteum mimetic coating can be tailored to achieve desired drug release profiles by making use of an appropriate biodegradable polymer or polymer blend. The efficacy study in a murine segmental femoral bone defect model demonstrates that the allograft coating composed of poly(lactic-co-glycolic acid) and bone morphogenetic protein-2 mimicking peptide significantly improves allograft healing as evidenced by decreased fibrotic tissue formation, increased periosteal bone formation, and enhanced osseointegration. Taken together, this study provides a platform technology for engineering a periosteum mimetic coating which can greatly promote bone allograft healing. This technology could eventually result in an off-the-shelf and multifunctional structural bone allograft for highly effective repair and reconstruction of large segmental bone defects. The technology can also be used to ameliorate the performance of other medical implants by modifying their surfaces.

Irregular Bone Defect Repair Using Tissue-Engineered Periosteum in a Rabbit Model

Background:

In previous studies, we succeeded in repairing a long bone defect with tissue-engineered periosteum (TEP), fabricated by incorporating rabbit mesenchymal stem cells with small intestinal submucosa. In this study, we investigated the feasibility of allogeneic irregular bone defect repair using TEP.

Methods:

We performed a subtotal resection of the scapula in 36 rabbits to establish a large irregular bone defect model. The rabbits were then randomly divided into three groups (n = 12 per group) and the defects were treated with TEP (Group 1), allogeneic deproteinized bone (DPB) (Group 2) or a hybrid of TEP and DPB (Group 3). At 4, 8, and 12 weeks after surgery, the rabbits were sacrificed, and the implants were harvested. X-ray radiographic and histological examinations were performed to detect bone healing. Ink-formaldehyde perfusion was introduced to qualitatively analyze vascularization in TEP engineered new bone.

Results:

The repair of scapular defects was diverse in all groups, shown by radiographic and histological tests. The radiographic scores in Group 1 and Group 3 were significantly higher than Group 2 at 8 and 12 weeks (p < 0.05). Histological scores further proved that Group 1 had significantly greater new bone formation compared to Group 3 (p < 0.05), while Group 2 had the lowest osteogenesis at all time-points (p < 0.001). Ink-formaldehyde perfusion revealed aboundant microvessels in TEP engineered new bone.

Conclusion:

We conclude that TEP is promising for the repair of large irregular bone defects. As a 3D scaffold, DPB could provide mechanical support and a shaping guide when combined with TEP. TEP engineered new bone has aboundant microvessels.

Biocompatibility and hemocompatibility of efficiently decellularized whole porcine kidney for tissue engineering

Whole kidney decellularization is a promising approach in regenerative medicine for engineering a functional organ. The reaction of the potential host depends on the biocompatibility of these decellularized constructs. Despite the proven ability of decellularized kidney scaffolds to guide cell attachment and growth, little is known about biocompatibility and hemocompatibility of these scaffolds. Our aim is to prepare decellularized kidneys of a clinically relevant size and evaluate its biocompatibility and hemocompatibility. Porcine kidneys were cannulated via the renal artery, and then perfused with 0.1% sodium dodecyl sulfate solution. Hematoxylin and eosin as well as DAPI staining confirmed cellular clearance from native kidneys in addition to preservation of the microstructure. SEM confirmed the absence of any cellular content within the scaffold, which is maintained in a well-organized 3D architecture. Decellularized kidneys retained the intact renal vasculature upon examination with contrast radiography. The essential structural extracellular matrix molecules were well-preserved. Scaffolds were susceptible to enzymatic degradation upon collagenase treatment. Scaffolds showed a good hemocompatibility when exposed to porcine blood. Decellularization was efficient to remove 97.7% of DNA from native kidneys in addition to the immunogenic and pathogenic antigens. Scaffolds did not induce the human immune response in vitro. Decellularized kidneys were non-cytotoxic to pig kidney cells (PKs). PKs were able to grow and proliferate within the decellularized renal scaffolds with maintaining a higher function than cells grown as monolayers. Thus, we have developed a rapid decellularization technique for generating biocompatible kidney scaffolds that represents a step toward development of a transplantable organ. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2034-2047, 2018.

In vivo investigation of tissue-engineered periosteum for the repair of allogeneic critical size bone defects in rabbits

Aim: The aim of the study was to evaluate the efficacy of tissue-engineered periosteum (TEP) in repairing allogenic bone defects in the long term. Materials & methods: TEP was biofabricated with osteoinduced rabbit bone marrow mesenchymal stem cells and porcine small intestinal submucosa (SIS). A total of 24 critical sized defects were created bilaterally in radii of 12 New Zealand White rabbits. TEP/SIS was implanted into the defect site. Bone defect repair was evaluated with radiographic and histological examination at 4, 8 and 12 weeks. Results: Bone defects were structurally reconstructed in the TEP group with mature cortical bone and medullary canals, however this was not observed in the SIS group at 12 weeks. Conclusion: The TEP approach can effectively restore allogenic critical sized defects, and achieve maturity of long-bone structure in 12 weeks in rabbit models.

Myoconductive and osteoinductive free-standing polysaccharide membranes

Free-standing (FS) membranes have increasing applications in the biomedical field as drug delivery systems for wound healing and tissue engineering. Here, we studied the potential of free-standing membranes made by the layer-by-layer assembly of chitosan and alginate to be used as a simple biomimetic system of the periosteum. The design of a periosteum-like membrane implies the elaboration of a thick membrane suitable for both muscle and bone formation. Our aim was to produce well-defined ∼50 μm thick polysaccharide membranes that could be easily manipulated, were mechanically resistant, and would enable both myogenesis and osteogenesis in vitro and in vivo. The membranes were chemically crosslinked to improve their mechanical properties. Crosslinking chemistry was followed via Fourier transform infrared spectroscopy and the mechanical properties of the membranes were assessed using dynamic mechanical analysis. The loading and release of the potent osteoinductive growth factor bone morphogenetic protein 2 (BMP-2) inside and outside of the FS membrane was followed by fluorescence spectroscopy in a physiological buffer over 1 month. The myogenic and osteogenic potentials of the membranes in vitro were assessed using BMP-2-responsive skeletal myoblasts. Finally, their osteoinductive properties in vivo were studied in a preliminary experiment using a mouse ectopic model. Our results showed that the more crosslinked FS membranes enabled a more efficient myoblast differentiation in myotubes. In addition, we showed that a tunable amount of BMP-2 can be loaded into and subsequently released from the membranes, depending on the crosslinking degree and the initial BMP-2 concentration in solution. Only the more crosslinked membranes were found to be osteoinductive in vivo. These polysaccharide-based membranes have strong potential as a periosteum-mimetic scaffold for bone tissue regeneration.

Construction of a Biocompatible Decellularized Porcine Hepatic Lobe for Liver Bioengineering

Objective

One of the major obstacles in applying decellularized organs for clinical use is the recellularization step, during which huge numbers of cells are required to develop whole livers. We established a simple protocol for constructing a bioartificial hepatic lobe and investigated its biocompatibility.

Methods

The right lateral lobe of porcine liver was decellularized using 0.1% sodium dodecyl sulfate through the right branch of the portal vein. Decellularized lobes were evaluated by histological and biochemical analyses. DNA content was quantified to validate the decellularization protocol. The presence of immunogenic and pathogenic antigens was checked to exclude potential rejection and thrombosis after xenotransplantation. Xeno-reactivity of decellularized tissue against human peripheral blood mononuclear cells was examined. Cytotoxicity was evaluated against hepatocarcinoma cells. Finally, scaffolds were incubated in collagenase for biodegradation testing.

Results

The decellularized lobe preserved the three-dimensional architecture, ultrastructure, extracellular matrix components, and vasculature. Scaffolds were almost depleted of DNA in addition to antigenic and pathogenic antigens, which are considered barriers to xenotransplantation. The human immune response against scaffolds was considered non-significant. Our matrices were biocompatible and biodegradable.

Conclusions

We successfully developed a non-cytotoxic, non-immunogenic, and biodegradable porcine hepatic lobe for future liver regeneration and bioengineering.

Overexpressing sonic hedgehog peptide restores periosteal bone formation in a murine bone allograft transplantation model

Although activation of hedgehog (Hh) signaling has been shown to induce osteogenic differentiation in vitro and bone formation in vivo, the underlying mechanisms and the potential use of Hh-activated mesenchymal progenitors in bone defect repair remain elusive. In this study, we demonstrated that implantation of periosteal-derived mesenchymal progenitor cells (PDMPCs) that overexpressed an N-terminal sonic hedgehog peptide (ShhN) via an adenoviral vector (Ad-ShhN) restored periosteal bone collar formation in a 4-mm segmental bone allograft model in immunodeficient mice. Ad-ShhN enhanced donor cell survival and microvessel formation in collagen scaffold at 2 weeks after surgery and induced donor cell-dependent bone formation at 6 weeks after surgery. Fluorescence-activated cell sorting analysis further showed that Ad-ShhN-PDMPC-seeded scaffold contained a twofold more CD45(-)Sca-1(+)CD34(+)VEGFR2(+) endothelial progenitors than Ad-LacZ-PDMPC-seeded scaffold at day 7 after surgery. Ad-ShhN-transduced PDMPCs induced a 1.8-fold more CD31(+) microvessel formation than Ad-LacZ-transduced PDMPCs in a coculture of endothelial progenitors and PDMPCs. Taken together, our data show that overexpression of ShhN in mesenchymal progenitors improves bone defect reconstruction by enhancing donor progenitor cell survival, differentiation, and scaffold revascularization at the site of compromised periosteum. Hh agonist-based therapy, therefore, merits further investigation in tissue engineering-based applications aimed at enhancing bone defect repair and reconstruction.

Elucidating multiscale periosteal mechanobiology: a key to unlocking the smart properties and regenerative capacity of the periosteum?

The periosteum, a thin, fibrous tissue layer covering most bones, resides in a dynamic, mechanically loaded environment. The periosteum also provides a niche for mesenchymal stem cells. The mechanics of periosteum vary greatly between species and anatomical locations, indicating the specialized role of periosteum as bone's bounding membrane. Furthermore, periosteum exhibits stress-state-dependent mechanical and material properties, hallmarks of a smart material. This review discusses what is known about the multiscale mechanical and material properties of the periosteum as well as their potential effect on the mechanosensitive progenitor cells within the tissue. Furthermore, this review addresses open questions and barriers to understanding periosteum's multiscale structure-function relationships. Knowledge of the smart material properties of the periosteum will maximize the translation of periosteum and substitute periosteum to regenerative medicine, facilitate the development of biomimetic tissue-engineered periosteum for use in instances where the native periosteum is lacking or damaged, and provide inspiration for a new class of smart, advanced materials.

Elucidating multiscale periosteal mechanobiology: a key to unlocking the smart properties and regenerative capacity of the periosteum?

The periosteum, a thin, fibrous tissue layer covering most bones, resides in a dynamic, mechanically loaded environment. The periosteum also provides a niche for mesenchymal stem cells. The mechanics of periosteum vary greatly between species and anatomical locations, indicating the specialized role of periosteum as bone's bounding membrane. Furthermore, periosteum exhibits stress-state-dependent mechanical and material properties, hallmarks of a smart material. This review discusses what is known about the multiscale mechanical and material properties of the periosteum as well as their potential effect on the mechanosensitive progenitor cells within the tissue. Furthermore, this review addresses open questions and barriers to understanding periosteum's multiscale structure-function relationships. Knowledge of the smart material properties of the periosteum will maximize the translation of periosteum and substitute periosteum to regenerative medicine, facilitate the development of biomimetic tissue-engineered periosteum for use in instances where the native periosteum is lacking or damaged, and provide inspiration for a new class of smart, advanced materials.