Evaluation of novel in situ synthesized nano-hydroxyapatite/collagen/alginate hydrogels for osteochondral tissue engineering

Advancements in drug-loaded hydrogel systems for bone defect repair

Bone defects are primarily the result of high-energy trauma, pathological fractures, bone tumor resection, or infection debridement. The treatment of bone defects remains a huge clinical challenge. The current treatment options for bone defects include bone traction, autologous/allogeneic bone transplantation, gene therapy, and bone tissue engineering amongst others. With recent developments in the field, composite scaffolds prepared using tissue engineering techniques to repair bone defects are used more often. Among the various composite scaffolds, hydrogel exhibits the advantages of good biocompatibility, high water content, and degradability. Its three-dimensional structure is similar to that of the extracellular matrix, and as such it is possible to load stem cells, growth factors, metal ions, and small molecule drugs upon these scaffolds. Therefore, the hydrogel-loaded drug system has great potential in bone defect repair. This review summarizes the various natural and synthetic materials used in the preparation of hydrogels, in addition to the latest research status of hydrogel-loaded drug systems.

Biomimetic biphasic scaffolds in osteochondral tissue engineering: Their composition, structure and consequences

Approaches to the design and construction of biomimetic scaffolds for osteochondral tissue, show increasing advances. Considering the limitations of this tissue in terms of repair and regeneration, there is a need to develop appropriately designed scaffolds. A combination of biodegradable polymers especially natural polymers and bioactive ceramics, shows promise in this field. Due to the complicated architecture of this tissue, biphasic and multiphasic scaffolds containing two or more different layers, could mimic the physiology and function of this tissue with a higher degree of similarity. The purpose of this review article is to discuss the approaches focused on the application of biphasic scaffolds for osteochondral tissue engineering, common methods of combining layers and the ultimate consequences of their use in patients were discussed.

An Overview of the Supramolecular Systems for Gene and Drug Delivery in Tissue Regeneration

Tissue regeneration is a prominent area of research, developing biomaterials aimed to be tunable, mechanistic scaffolds that mimic the physiological environment of the tissue. These biomaterials are projected to effectively possess similar chemical and biological properties, while at the same time are required to be safely and quickly degradable in the body once the desired restoration is achieved. Supramolecular systems composed of reversible, non-covalently connected, self-assembly units that respond to biological stimuli and signal cells have efficiently been developed as preferred biomaterials. Their biocompatibility and the ability to engineer the functionality have led to promising results in regenerative therapy. This review was intended to illuminate those who wish to envisage the niche translational research in regenerative therapy by summarizing the various explored types, chemistry, mechanisms, stimuli receptivity, and other advancements of supramolecular systems.

De novo dual functional 3D scaffold using computational simulation with controlled drug release

A novel and facile synthesis is made of cotton-like three-dimensional (3D) fibrous scaffold containing spatiotemporally defined patterns of simvastatin (SIM) optimized for angiogenesis-coupled osteogenesis. Herein, we demonstrate the 3D fiber deposition mechanism in detail during the electrospinning process via computer simulation. The 3D fibrous scaffolds were functionalized with hydroxyapatite nanoparticles (HA - NPs) to induce the biomineralization process mimicking the natural apatite layer. The morphology, physiochemical properties, biomimetic mineralization, and drug release of the as-fabricated 3D fibrous scaffolds of simvastatin-loaded poly (ɛ-caprolactone) poly (glycerol-sebacate) hydroxyapatite nanoparticles (3D - PGHS) were investigated. The effects of simvastatin on the osteogenic differentiation of human mesenchymal stem cells (hMSCs) and angiogenesis in human umbilical vein endothelial cells (HUVECs) were assessed. The results showed that the 3D - PGHS both enhanced the expression of osteogenic markers including ALP, RUNX2, and COLA1 in hMSCs, and promoted the migration and tube formation of HUVECs. This finding demonstrates the potential of 3D scaffold-loaded SIM as a putative point-of-care therapy for tightly controlled tissue regeneration.

Simultaneous incorporation of PTH(1-34) and nano-hydroxyapatite into Chitosan/Alginate Hydrogels for efficient bone regeneration

Tissue regeneration based on the utilization of artificial soft materials is considered a promising treatment for bone-related diseases. Here, we report cranial bone regeneration promoted by hydrogels that contain parathyroid hormone (PTH) peptide PTH(1-34) and nano-hydroxyapatite (nHAP). A combination of the positively charged natural polymer chitosan (CS) and negatively charged sodium alginate led to the formation of hydrogels with porous structures, as shown by scanning electron microscopy. Rheological characterizations revealed that the mechanical properties of the hydrogels were almost maintained upon the addition of nHAP and PTH(1-34). In vitro experiments showed that the hydrogel containing nHAP and PTH(1-34) exhibited strong biocompatibility and facilitated osteogenic differentiation of rat bone marrow mesenchymal stem cells (rBMSCs) via the Notch signaling pathway, as shown by the upregulated expression of osteogenic-related proteins. We found that increasing the content of PTH(1-34) in the hydrogels resulted in enhanced osteogenic differentiation of BMSCs. Implantation of the complex hydrogel into a rat cranial defect model led to efficient bone regeneration compared to the rats treated with the hydrogel alone or with nHAP, indicating the simultaneous therapeutic effect of nHAP and PTH during the treatment process. Both the in vitro and in vivo results demonstrated that simultaneously incorporating nHAP and PTH into hydrogels shows promise for bone regeneration, suggesting a new strategy for tissue engineering and regeneration in the future.

Recent Progress in 3D Printing of Elastic and High-Strength Hydrogels for the Treatment of Osteochondral and Cartilage Diseases

Despite considerable progress for the regenerative medicine, repair of full-thickness articular cartilage defects and osteochondral interface remains challenging. This low efficiency is largely due to the difficulties in recapitulating the stratified zonal architecture of articular cartilage and engineering complex gradients for bone-soft tissue interface. This has led to increased interest in three-dimensional (3D) printing technologies in the field of musculoskeletal tissue engineering. Printable and biocompatible hydrogels are attractive materials for 3D printing applications because they not only own high tunability and complexity, but also offer favorable biomimetic environments for live cells, such as porous structure, high water content, and bioactive molecule incorporation. However, conventional hydrogels are usually mechanically weak and brittle, which cannot reach the mechanical requirements for repair of articular cartilage defects and osteochondral interface. Therefore, the development of elastic and high-strength hydrogels for 3D printing in the repairment of cartilage defects and osteochondral interface is crucial. In this review, we summarized the recent progress in elastic and high-strength hydrogels for 3D printing and categorized them into six groups, namely ion bonds interactions, nanocomposites integrated in hydrogels, supramolecular guest-host interactions, hydrogen bonds interactions, dynamic covalent bonds interactions, and hydrophobic interactions. These 3D printed elastic and high-strength hydrogels may provide new insights for the treatment of osteochondral and cartilage diseases.

The Application of Hydrogels Based on Natural Polymers for Tissue Engineering

:

Hydrogels are known as polymer-based networks with the ability to absorb water and other body fluids. Because of this, the hydrogels are used to preserve drugs, proteins, nutrients or cells. Hydrogels possess great biocompatibility, and properties like soft tissue, and networks full of water, which allows oxygen, nutrients, and metabolites to pass. Therefore, hydrogels are extensively employed as scaffolds in tissue engineering. Specifically, hydrogels made of natural polymers are efficient structures for tissue regeneration, because they mimic natural environment which improves the expression of cellular behavior.

:

Producing natural polymer-based hydrogels from collagen, hyaluronic acid (HA), fibrin, alginate, and chitosan is a significant tactic for tissue engineering because it is useful to recognize the interaction between scaffold with a tissue or cell, their cellular reactions, and potential for tissue regeneration. The present review article is focused on injectable hydrogels scaffolds made of biocompatible natural polymers with particular features, the methods that can be employed to engineer injectable hydrogels and their latest applications in tissue regeneration.

Hidrogeles de colágeno acoplados con hidroxiapatita para aplicaciones en ingeniería tisular

Los hidrogeles basados en colágeno son redes tridimensionales (3D) con la capacidad de absorber agua y una alta biocompatibilidad para utilizarlos en la reparación de tejidos dañados. Estos materiales presentan pobres propiedades mecánicas y velocidades de degradación rápidas, limitando su aplicación a estrategias de ingeniería tisular y biomedicina; por ésto, la incorporación de fases inorgánicas en la matriz 3D del colágeno como la hidroxiapatita ha contribuido en la mejora de sus propiedades, incrementado la eficiencia de los hidrogeles híbridos obtenidos. Este trabajo, presenta las contribuciones más relevantes relacionadas con los sistemas de hidrogeles basados en colágeno y partículas de hidroxiapatita dispersas dentro de la matriz colagénica, lo que evidencia que la combinación de los materiales no altera la biocompatibilidad y biodegradabilidad típicas del colágeno, permitiendo la adhesión, proliferación, crecimiento celular y control del metabolismo de las células implicadas en los procesos de una reparación ósea, presentando a los hidrogeles como una estrategia para su uso potencial en la ingeniería tisular.

Enzymatically gellable gelatin improves nano-hydroxyapatite-alginate microcapsule characteristics for modular bone tissue formation

To maintain gelatin (Gel) as adhesive motifs inside alginate microcapsule as building blocks of modular approach, phenol moiety (Ph) was introduced into gelatin (Gel Ph). Addition of Gel Ph to alginate (Alg-Gel Ph) dramatically altered the physical properties of alginate-based hydrogels as compared to unmodified gelatin (Alg-Gel) addition. Alg-Gel Ph hydrogels revealed a dramatically lower swelling ratios (63%) as compared to Alg-Gel hydrogels (150%). Moreover, Gel Ph decreased 40% degradation rate of alginate-based hydrogels after 72 hr, while increasing compressive modulus 3.5-fold as compared to Alg-Gel hydrogels. Introducing nano-hydroxyapatite (nHA) to Alg-Gel Ph hydrogel (Alg-Gel Ph-nHA) could reduce degradation rate to 41.5% and improve compressive modulus of hydrogels significantly, reaching to 294 ± 2.5 kPa. The microencapsulated osteoblast-like cells proliferated considerably and showed more metabolic activities (two times) in Alg-Gel Ph-nHA microcapsules during a 21-day culture period, resulting in more calcium deposition and alkaline phosphatase (ALP) activities. The subcutaneous microcapsules could also be identified readily without complete absorption and signs of toxicity or any untoward reactions and viable osteoblast-like cells were seen as red colored areas in the central regions of cell-laden microcapsules after 1 month. The study demonstrated Alg-Gel Ph-nHA microcapsule as a promising 3D microenvironment for modular bone tissue formation.

An Injectable Strong Hydrogel for Bone Reconstruction

For treating bone defects in periarticular fractures, there is a lack of biomaterial with injectable characteristics, tough structure, and osteogenic capacity for providing a whole-structure support and osteogenesis in the defect area. An injectable hydrogel is an ideal implant, however is weak as load-bearing scaffolds. Herein, a new strategy, i.e., an in situ formation of "active" composite double network (DN), is raised for the preparation of an injectable strong hydrogel particularly against compression. As a demonstration, 4-carboxyphenylboronic acid grafted poly(vinyl alcohol) (PVA) is crosslinked using calcium ions to provide a tough frame while bioactive glass (BG) microspheres are associated by poly(ethylene glycol) to obtain an interpenetrated inorganic network for reinforcement. The injected PVA/BG DN hydrogel gains compressive strength, modulus, and fracture energy of 34 MPa, 0.8 MPa, and 40 kJ m^-2 , respectively. Then, the properties can be "autostrengthened" to 57 MPa, 2 MPa, and 65 kJ m^-2 by mineralization in 14 days. In vivo experiments prove that the injected DN hydrogel is more efficient to treat femoral supracondylar bone defects than the implanted bulk DN gel. The work suggests a facile way to obtain a strong hydrogel with injectability, cytocompatibility, and tailorable functionality.

Design of Nanocomposite Injectable Hydrogels for Minimally Invasive Surgery

Biocompatible hydrogels are materials that hold great promise in medicine and biology since the porous structure, the ability to entrap a large amount of water, and the tunability of their mechanical and tissue adhesive properties make them suitable for several applications, including wound healing, drug and cell delivery, cancer treatment, bioelectronics, and tissue regeneration. Among the possible developed systems, injectable hydrogels, owing to their properties, are optimal candidates for in vivo minimally invasive procedures. To be injectable, a hydrogel must be liquid before and during the injection, but it must quickly jellify after injection to form a soft, self-standing, solid material. The possibility to work with a liquid precursor encoding the functions that will be available after gelation allows the development of biocompatible materials that can be employed in surgery and, in particular, in noninvasive procedures. The underlying idea is to reach the target tissue by using just a needle, or by exploiting the natural body orifices, reducing surgery procedure time, induced pain, and risk of infections. Hydrogels with different properties can be obtained by changing the type of cross-linking, the cross-linking density or the molecular weight of the polymer, or by introducing pending functional groups. The introduction of a nanofiller in the hydrogel network allows for expanding the suite of the structural and functional properties and for better mimicking native tissues. In this Account, we discuss how to provide a hydrogel network with designed properties by playing with both the polymeric chains and the fillers. We present selected examples from the literature that show how to introduce stiffness, stretchability, adhesiveness, self-healing, anisotropy, antimicrobial activity, biodegradability, and conductivity in injectable hydrogels. We further describe how the chemical composition, the mechanical properties, and the microarchitecture of the hydrogel influence cell adhesion, proliferation, and differentiation. Examples of injectable hydrogels for innovative minimally invasive procedures are then discussed in detail; in particular, we showcase the use of hydrogels for tumor resection and as vascular chemoembolization agents. We further discuss how one can improve the rheological properties of injectable hydrogels to exploit them in osteochondral tissue engineering. The effect of the introduction of a conductive filler is then presented in relation to the development of electroactive scaffolds for cardiac-tissue engineering and neural and nerve repair. We believe that the rational design of biocompatible, injectable hybrid hydrogels with tunable properties will likely play a crucial role in reducing the invasiveness and improving the outcome of several clinical and surgical setups.

Advances of nanotechnology in osteochondral regeneration

In the past few decades, nanotechnology has proven to be one of the most powerful engineering strategies. The nanotechnologies for osteochondral tissue engineering aim to restore the anatomical structures and physiological functions of cartilage, subchondral bone, and osteochondral interface. As subchondral bone and articular cartilage have different anatomical structures and the physiological functions, complete healing of osteochondral defects remains a great challenge. Considering the limitation of articular cartilage to self-healing and the complexity of osteochondral tissue, osteochondral defects are in urgently need for new therapeutic strategies. This review article will concentrate on the most recent advancements of nanotechnologies, which facilitates chondrogenic and osteogenic differentiation for osteochondral regeneration. Moreover, this review will also discuss the current strategies and physiological challenges for the regeneration of osteochondral tissue. Specifically, we will summarize the latest developments of nanobased scaffolds for simultaneously regenerating subchondral bone and articular cartilage tissues. Additionally, perspectives of nanotechnology in osteochondral tissue engineering will be highlighted. This review article provides a comprehensive summary of the latest trends in cartilage and subchondral bone regeneration, paving the way for nanotechnologies in osteochondral tissue engineering. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement.

Nano-hydroxyapatite-alginate-gelatin microcapsule as a potential osteogenic building block for modular bone tissue engineering

To develop osteogenic building blocks for modular bone tissue engineering applications, influence of gelatin as cell adhesive molecule and nano-hydroxyapatite (nHA) as osteoconductive component was examined on alginate-based hydrogel properties and microencapsulated osteoblast-like cell behavior by using factorial experimental design technique. nHA and alginate showed a statistically significant impact on swelling reduction, and improvement of stability and mechanical strength of hydrogels, respectively. Gelatin influence, however, was in a reverse manner. nHA played imperative roles in promoting microencapsulated osteoblastic cell proliferation and function due to its bioactivity and mechanical strength improvement of hydrogels to the modulus range of mineralized bone tissue in vivo. The results and their statistical analysis also revealed the importance of interaction effect of gelatin and nHA. Proliferation and osteogenic function of the cells fluctuated with increasing gelatin concentration of microcapsules in the presence of nHA, demonstrating that hydrogel properties should be balanced to provide an efficient 3D osteoconductive microcapsule. Alginate (1%)-gelatin (2.5%)-nHA (0.5%) microcapsule with compressive modulus of 0.19 MPa ± 0.02, swelling ratio of 52% ± 8 (24 h) and degradation rate of 12% ± 4 (96 h) revealed a maximum performance for the cell proliferation and function, indicating a potential microcapsule composition to prepare building blocks for modular bone tissue engineering.

Injectable hydrogels: a new paradigm for osteochondral tissue engineering

Osteochondral tissue engineering has become a promising strategy for repairing focal chondral lesions and early osteoarthritis (OA), which account for progressive joint pain and disability in millions of people worldwide. Towards improving osteochondral tissue repair, injectable hydrogels have emerged as promising matrices due to their wider range of properties such as their high water content and porous framework, similarity to the natural extracellular matrix (ECM), ability to encapsulate cells within the matrix and ability to provide biological cues for cellular differentiation. Further, their properties such as those that facilitate minimally invasive deployment or delivery, and their ability to repair geometrically complex irregular defects have been critical for their success. In this review, we provide an overview of innovative approaches to engineer injectable hydrogels towards improved osteochondral tissue repair. Herein, we focus on understanding the biology of osteochondral tissue and osteoarthritis along with the need for injectable hydrogels in osteochondral tissue engineering. Furthermore, we discuss in detail different biomaterials (natural and synthetic) and various advanced fabrication methods being employed for the development of injectable hydrogels in osteochondral repair. In addition, in vitro and in vivo applications of developed injectable hydrogels for osteochondral tissue engineering are also reviewed. Finally, conclusions and future perspectives of using injectable hydrogels in osteochondral tissue engineering are provided.

Synthesis of bioinspired collagen/alginate/fibrin based hydrogels for soft tissue engineering

Hydrogels based on natural polymers offer a range of properties to mimic the native extracellular matrix, and provide microenvironments to preserve cellular function and encourage tissue formation. A tri-component hydrogel using collagen, alginate and fibrin (CAF) was developed and investigated at three collagen concentrations for application as a functional extracellular matrix analogue. Physical-chemical characterization of CAF hydrogels demonstrated a thermo-responsive crosslinking capacity at physiological conditions with stiffness similar to native soft tissues. CAF hydrogels were also assessed for cytocompatibility using L929 murine fibroblasts, pancreatic MIN6 β-cells and human mesenchymal stem cells (hMSCs); and demonstrated good cell viability, proliferation and metabolic activity after 7 days of in vitro culture. CAF hydrogels, especially with 2.5% w/v collagen, increased alkaline phosphatase production in hMSCs indicating potential for the promotion of osteogenic activity. Moreover, CAF hydrogels also increased metabolic activity of MIN6 β-cells and promoted the reconstitution of spherical pseudoislets with sizes ranging between 50 and 150 μm at day 7, demonstrating potential in diabetic therapeutic applications.

Nano-hydroxyapatite/collagen film as a favorable substrate to maintain the phenotype and promote the growth of chondrocytes cultured in vitro

Autologous chondrocyte implantation (ACI) has emerged as a novel approach to cartilage repair through the use of harvested chondrocytes. However, the expansion of the chondrocytes from the donor tissue in vitro is restricted by the limited cell numbers and the dedifferentiation of the chondrocytes. The present study investigated the effect of collagen-based films, including collagen, hydroxyapatite (HA)/collagen (HC) and in situ synthesis of nano‑HC (nHC), on monolayer cultures of chondrocytes. As a substrate for the chondrocytes monolayer culture in vitro, nHC was able to restrain the dedifferentiation of chondrocytes and facilitate cell expansion, which was detected by methyl thiazolyl tetrazolium assay, scanning electron microscopy, calcein‑acetoxymethyl/propidium iodide staining, hematoxylin and eosin staining, Safranin O staining, immunohistochemical staining and reverse transcription‑quantitative polymerase chain reaction. Furthermore, the nHC films significantly facilitated cell growth and enhanced the expression of cartilage‑specific extracellular matrix (ECM) components, including aggrecan and type II collagen. In addition, nHC films markedly downregulated the expression of collagen type I, an indicator of dedifferentiation. The results indicated that nHC, a collagen‑based substrate optimized by nanoparticles, was able to better support cell growth and preserve cell phenotype compared with collagen alone or HC. The nHC film, which favors cell growth and prevents the dedifferentiation of chondrocytes, may therefore serve as a useful cartilage‑like ECM for chondrocytes. In conclusion, nHC film is a promising substrate for the culture of chondrocytes in cell-based therapy.

Impact of collagen-alginate composition from microbead morphological properties to microencapsulated canine adipose tissue-derived mesenchymal stem cell activities

The purpose of this study was to identify the effect of collagen-alginate composition on the size and shape of microbeads and the proliferation and osteogenic properties of microencapsulated canine adipose-derived mesenchymal stem cells (ASCs) in vitro. Canine ASCs were microencapsulated in mixtures of various collagen-alginate compositions using a vibrational technologic encapsulator. The size and shape of the resultant microbeads were measured using a light field microscope and the viability of the microencapsulated canine ASCs was evaluated using a live/dead viability/cytotoxicity kit. Proliferation and osteogenic potentials of microencapsulated canine ASCs were evaluated using an alamarBlue proliferation assay and an alkaline phosphatase assay, respectively. As the collagen ratio increased, the size and size variation of microbeads increased and the shape of microbeads became more irregular. Nonetheless, homogeneous microbeads were created with no significant difference in size and shape, in the range of 0.75% alginate mixed with 0.099% collagen solution in 1.2% alginate solution. There were no significant differences in viability of the ASCs in the various collagen-alginate compositions. Both proliferation and osteogenic properties, in vitro, increased with increasing collagen ratio. Microencapsulation of canine ASCs with appropriate collagen-alginate composition increases cell proliferation and osteogenic properties, in vitro, without significant effects on the shape and size of microbeads and cell viability. Microencapsulation with adequate collagen-alginate composition may produce injectable microbeads that could enhance the therapeutic efficacy of stem cells.

Enhanced osteogenesis and angiogenesis by mesoporous hydroxyapatite microspheres-derived simvastatin sustained release system for superior bone regeneration

Biomaterials with both excellent osteogenic and angiogenic activities are desirable to repair massive bone defects. In this study, simvastatin with both osteogenic and angiogenic activities was incorporated into the mesoporous hydroxyapatite microspheres (MHMs) synthesized through a microwave-assisted hydrothermal method using fructose 1,6-bisphosphate trisodium salt (FBP) as an organic phosphorous source. The effects of the simvastatin-loaded MHMs (S-MHMs) on the osteogenic differentiation of rat bone marrow mesenchymal stem cells (rBMSCs) and angiogenesis in EA.hy926 cells were investigated. The results showed that the S-MHMs not only enhanced the expression of osteogenic markers in rBMSCs but also promoted the migration and tube formation of EA.hy926 cells. Furthermore, the S-MHMs were incorporated into collagen matrix to construct a novel S-MHMs/collagen composite scaffold. With the aid of MHMs, the water-insoluble simvastatin was homogenously incorporated into the hydrophilic collagen matrix and presented a sustained release profile. In vivo experiments showed that the S-MHMs/collagen scaffolds enhanced the bone regeneration and neovascularization simultaneously. These results demonstrated that the water-insoluble simvastatin could be incorporated into the MHMs and maintained its biological activities, more importantly, the S-MHMs/collagen scaffolds fabricated in this study are of immense potential in bone defect repair by enhancing osteogenesis and angiogenesis simultaneously.

Nanoreinforced Hydrogels for Tissue Engineering: Biomaterials that are Compatible with Load-Bearing and Electroactive Tissues

Given their highly porous nature and excellent water retention, hydrogel-based biomaterials can mimic critical properties of the native cellular environment. However, their potential to emulate the electromechanical milieu of native tissues or conform well with the curved topology of human organs needs to be further explored to address a broad range of physiological demands of the body. In this regard, the incorporation of nanomaterials within hydrogels has shown great promise, as a simple one-step approach, to generate multifunctional scaffolds with previously unattainable biological, mechanical, and electrical properties. Here, recent advances in the fabrication and application of nanocomposite hydrogels in tissue engineering applications are described, with specific attention toward skeletal and electroactive tissues, such as cardiac, nerve, bone, cartilage, and skeletal muscle. Additionally, some potential uses of nanoreinforced hydrogels within the emerging disciplines of cyborganics, bionics, and soft biorobotics are highlighted.

Injectable scaffolds: Preparation and application in dental and craniofacial regeneration

Injectable scaffolds are appealing for tissue regeneration because they offer many advantages over pre-formed scaffolds. This article provides a comprehensive review of the injectable scaffolds currently being investigated for dental and craniofacial tissue regeneration. First, we provide an overview of injectable scaffolding materials, including natural, synthetic, and composite biomaterials. Next, we discuss a variety of characteristic parameters and gelation mechanisms of the injectable scaffolds. The advanced injectable scaffolding systems developed in recent years are then illustrated. Furthermore, we summarize the applications of the injectable scaffolds for the regeneration of dental and craniofacial tissues that include pulp, dentin, periodontal ligament, temporomandibular joint, and alveolar bone. Finally, our perspectives on the injectable scaffolds for dental and craniofacial tissue regeneration are offered as signposts for the future advancement of this field.

A practical way to prepare primer human chondrocyte culture

Biological cartilage repair is one of the most important targets for orthopedic surgeons currently. For this purpose, it is mandatory to know how to prepare a chondrocyte culture. In this study, our purpose was to introduce a method enabling orthopedic surgeons to practice their knowledge and skills on molecular experimental setup at cellular level, based on our experiences from previous pilot studies. Thus, we believe it will encourage orthopedic surgeons.

Application of Collagen Scaffold in Tissue Engineering: Recent Advances and New Perspectives

Collagen is the main structural protein of most hard and soft tissues in animals and the human body, which plays an important role in maintaining the biological and structural integrity of the extracellular matrix (ECM) and provides physical support to tissues. Collagen can be extracted and purified from a variety of sources and offers low immunogenicity, a porous structure, good permeability, biocompatibility and biodegradability. Collagen scaffolds have been widely used in tissue engineering due to these excellent properties. However, the poor mechanical property of collagen scaffolds limits their applications to some extent. To overcome this shortcoming, collagen scaffolds can be cross-linked by chemical or physical methods or modified with natural/synthetic polymers or inorganic materials. Biochemical factors can also be introduced to the scaffold to further improve its biological activity. This review will summarize the structure and biological characteristics of collagen and introduce the preparation methods and modification strategies of collagen scaffolds. The typical application of a collagen scaffold in tissue engineering (including nerve, bone, cartilage, tendon, ligament, blood vessel and skin) will be further provided. The prospects and challenges about their future research and application will also be pointed out.

Clinical evaluation following the use of mineralized collagen graft for bone defects in revision total hip arthroplasty

Revision total hip arthroplasty (THA) with massive bone loss has been a real challenge for orthopaedic surgeons. Here we describe an approach using mineralized collagen (MC) graft to reconstruct acetabulum and femur with massive bone defects. We identified 89 patients suffering acetabular or femoral bone defects after primary THA, who required revision THA for this study. During the surgery, MC was applied to reconstruct both the acetabular and femoral defects. Harris hip score was used to evaluate hip function while radiographs were taken to estimate bone formation in the defect regions. The average follow-up period was 33.6 ± 2.4 months. None of the components needed re-revised. Mean Harris hip scores were 42.5 ± 3.5 before operation, 75.2 ± 4.0 at 10th month and 95.0 ± 3.6 at the final follow-up. There were no instances of deep infection, severe venous thrombosis or nerve palsy. The present study demonstrated that MC graft can serve as a promising option for revision THA with massive bone deficiency. Meanwhile, extended follow-up is needed to further prove its long-term performance.

Are biological agents toxic to human chondrocytes and osteocytes?

Purpose

The aim of the present study is to investigate the effects of biological agents (BAs) on human chondrocytes and osteocytes in vitro.

Methods

Primary cell cultures obtained from gonarthrosis patients were divided into four groups, two of which were designated as control cultures of chondrocyte and osteocyte, and the other two groups were exposed to BAs administered via the culture medium. Cultured cells were characterized by immunophenotyping. Before and after administration of the agents, the cultures were observed by inverted and environmental scanning electron microscopy (ESEM). The number of live cells and the proliferation rate were monitored by MTT assay.

Results

Rituximab and adalimumab were the least toxic agents to chondrocytes, whereas adalimumab and etanercept were to osteocytes.

Conclusion

During periods of intense active inflammation, the concentration of the preferred BAs after inhibition of inflammation needs to be emphasized when their effects on cartilage and bone tissue are considered at the cellular level if the clinical practice is to continue.

PRP and articular cartilage: a clinical update

The convincing background of the recent studies, investigating the different potentials of platelet-rich plasma, offers the clinician an appealing alternative for the treatment of cartilage lesions and osteoarthritis. Recent evidences in literature have shown that PRP may be helpful both as an adjuvant for surgical treatment of cartilage defects and as a therapeutic tool by intra-articular injection in patients affected by osteoarthritis. In this review, the authors introduce the trophic and anti-inflammatory properties of PRP and the different products of the available platelet concentrates. Then, in a complex scenario made of a great number of clinical variables, they resume the current literature on the PRP applications in cartilage surgery as well as the use of intra-articular PRP injections for the conservative treatment of cartilage degenerative lesions and osteoarthritis in humans, available as both case series and comparative studies. The result of this review confirms the fascinating biological role of PRP, although many aspects yet remain to be clarified and the use of PRP in a clinical setting has to be considered still exploratory.

Sustained knock down of PPARγ and bFGF presentation in collagen hydrogels promote MSC osteogenesis

Collagen hydrogels were considered as favourable scaffolding for tissue engineering. It was demonstrated that cytokines and siRNAs could be efficiently retained by collagen hydrogels for controlled release thereby enhancing their bioactivities. Basic fibroblast growth factor (bFGF) was a stimulator for osteogenic differentiation of mesenchymal stem cells (MSC), and PPARγ was a key regulator in MSC osteogenic differentiation. However, whether bFGF and PPARγ could play synergetic roles within a 3D matrix to promote MSC osteogenic differentiation was unknown. In the study, bFGF and PPARγ targeting siRNAs were incorporated into collagen hydrogels for MSC cultivation. Their optimal concentrations in collagen hydrogels were determined. The capacity of bFGF/siRNA-carrying hydrogels in supporting osteogenic differentiation of MSCs was systematically evaluated with multimodality of methods, including flow cytometry, quantitative real-time PCR, Western Blotting, as well as ALP activity and calcium content determination. We demonstrated in 3D collagen hydrogel that both bFGF and siRNA molecules were efficiently retained, strengthening their effects on the incorporated MSCs. Osteogenic analysis demonstrated that the in-situ forming hydrogels carrying bFGF and siRNAs potently promoted osteogenic differentiation of incorporated MSCs, significantly superior to pure collagen and bFGF-carrying collagen. Thus, collagen hydrogels functionalized with bFGF and PPARγ targeting siRNAs may be promising in bone tissue engineering.