Novel β -TCP/PVA bilayered hydrogels with considerable physical and bio-functional properties for osteochondral repair

3D printing nacre powder/sodium alginate scaffold loaded with PRF promotes bone tissue repair and regeneration

Bone defects are a common complication of bone diseases, which often affect the quality of life and mental health of patients. The use of biomimetic bone scaffolds loaded with bioactive substances has become a focal point in the research on bone defect repair. In this study, composite scaffolds resembling bone tissue were created using nacre powder (NP) and sodium alginate (SA) through 3D printing. These scaffolds exhibit several physiological structural and mechanical characteristics of bone tissue, such as suitable porosity, an appropriate pore size, applicable degradation performance and satisfying the mechanical requirements of cancellous bone, etc. Then, platelet-rich fibrin (PRF), containing a mass of growth factors, was loaded on the NP/SA scaffolds. This was aimed to fully maximize the synergistic effect with NP, thereby accelerating bone tissue regeneration. Overall, this study marks the first instance of preparing a bionic bone structure scaffold containing NP by 3D printing technology, which is combined with PRF to further accelerate bone regeneration. These findings offer a new treatment strategy for bone tissue regeneration in clinical applications.

Super-Strong Hydrogel Composites Reinforced with PBO Nanofibers for Cartilage Replacement

Cartilage replacement materials exhibiting a set of demanding properties such as high water content, high mechanical stiffness, low friction, and excellent biocompatibility are quite difficult to achieve. Here, poly(p-phenylene-2,6-benzobisoxazole) (PBO) nanofibers are combined with polyvinyl alcohol (PVA) to form a super-strong structure with a performance that surpasses the vast majority of previously existing hydrogels. PVA-PBO composites with water contents in the 59-76% range exhibit tensile and compressive moduli reaching 20.3 and 4.5 MPa, respectively, and a coefficient of friction below 0.08. Further, they are biocompatible and support the viability of chondrocytes for 1 week, with significant improvements in cell adhesion, proliferation, and differentiation compared to PVA. The new composites can be safely sterilized by steam heat or gamma radiation without compromising their integrity and overall performance. In addition, they show potential to be used as local delivery platforms for anti-inflammatory drugs. These attractive features make PVA-PBO composites highly competitive engineered materials with remarkable potential for use in the design of load-bearing tissues. Complementary work has also revealed that these composites will be interesting alternatives in other industrial fields where high thermal and mechanical resistance are essential requirements, or which can take advantage of the pH responsiveness functionality.

Research progress of cartilage lubrication and biomimetic cartilage lubrication materials

Human joints move thousands of times a day. The articular cartilage plays a vital role in joints’ protection. If there is dysfunction in cartilage lubrication, cartilage cannot maintain its normal function. Eventually, the dysfunction may bring about osteoarthritis (OA). Extensive researches have shown that fluid film lubrication, boundary lubrication, and hydration lubrication are three discovered lubrication models at cartilage surface, and analyzing and simulating the mechanism of cartilage lubrication are fundamental to the treatment of OA. This essay concludes recent researches on the progress of cartilage lubrication and biomimetic cartilage, revealing the pathophysiology of cartilage lubrication and updating bio-inspired cartilage lubrication applications.

Superlarge living hyaline cartilage graft contributed by the scale-changed porous 3D culture system for joint defect repair

It is known that an excellent hyaline cartilage phenotype, an internal microstructure with safe crosslinking and available size flexibility are the key factors of cartilage grafts that allow for clinical application. Living hyaline cartilage grafts (LhCGs) constructed by phase-transfer hydrogel (PTCC) systems were reported to have a hyaline phenotype and bionic microstructure. By employing chondrocytes to secrete matrix in the hydrogel and then removing the material to obtain material-free tissue in vitro, LhCG technology exhibited superior performance in cartilage repair. However, PTCC systems could only produce small-sized LhCGs because of medium delivery limitations, which hinders the clinical application of LhCGs. In this study, we prepared three different noncrosslinked gelatin microspheres with diameters from 200 μm to 500 μm, which replaced the original pore-forming agent. The new PTCC system with the mixed and gradient porous structure was used for the preparation of superlarge LhCGs with a continuous structure and hyaline phenotype. Compared to the original technique, the porous gradient structure promoted nutrient delivery and cartilage matrix secretion. The small size of the microporous structure promoted the rapid formation of matrix junctions. The experimental group with a mixed gradient increased cartilage matrix secretion significantly by more than 50% compared to the that of the control. The LhCG final area reached 7 cm²without obvious matrix stratification in the mixed gradient group. The design of the scale-changed porous PTCC system will make LhCGs more promising for clinical application.

Progress in 3D Bioprinting Technology for Osteochondral Regeneration

Osteochondral injuries can lead to osteoarthritis (OA). OA is characterized by the progressive degradation of the cartilage tissue together with bone tissue turnover. Consequently, joint pain, inflammation, and stiffness are common, with joint immobility and dysfunction being the most severe symptoms. The increase in the age of the population, along with the increase in risk factors such as obesity, has led OA to the forefront of disabling diseases. In addition, it not only has an increasing prevalence, but is also an economic burden for health systems. Current treatments are focused on relieving pain and inflammation, but they become ineffective as the disease progresses. Therefore, new therapeutic approaches, such as tissue engineering and 3D bioprinting, have emerged. In this review, the advantages of using 3D bioprinting techniques for osteochondral regeneration are described. Furthermore, the biomaterials, cell types, and active molecules that are commonly used for these purposes are indicated. Finally, the most recent promising results for the regeneration of cartilage, bone, and/or the osteochondral unit through 3D bioprinting technologies are considered, as this could be a feasible therapeutic approach to the treatment of OA.

Low-Temperature Synthesis of Hollow β-Tricalcium Phosphate Particles for Bone Tissue Engineering Applications

β-Tricalcium phosphate (β-TCP) has been extensively used in bone tissue engineering in the form of scaffolds, granules, or as reinforcing phase in organic matrices. Solid-state reaction route at high temperatures (>1000 °C) is the most widely used method for the preparation of β-TCP. The high-temperature synthesis, however, results in the formation of hard agglomerates and fused particles which necessitates postprocessing steps such as milling and sieving operations. This, inadvertently, could lead to introducing unwanted trace elements, promoting particle shape irregularity as well as compromising the biodegradability and bioactivity of β-TCP because of the solid microstructure of particles. In this study, we introduce a one-pot wet-chemical method at low temperatures (between 160 and 170 °C) to synthesize hollow β-TCP (hβ-TCP) submicron particles of an average size of 300 nm with a uniform rhombohedral shape. We assessed the cytocompatibility of the hβ-TCP using primary human osteoblasts (HOB), adipose-derived stem cells (ADSC), and antigen-presenting cells (APCs). We demonstrate the bioactivity of the hβ-TCP when cultured with HOB, ADSC, and APCs at a range of particle concentrations (up to 1000 μg/mL) for up to 7 days. hβ-TCP significantly enhances osteogenic differentiation of ADSC without the addition of osteogenic supplements. These findings offer a new type of β-TCP particles prepared at low temperatures, which present various opportunities for developing β-TCP based biomaterials.

High-performance bilayer composites for the replacement of osteochondral defects

Two novel bilayer constructs for the repair of osteochondral defects were developed from nanofibers and ceramic particles embedded into PVA matrices, exhibiting multiple promising properties similar to those of corresponding natural tissues.

Therapeutic application of 3B-PEG injectable hydrogel/Nell-1 composite system to temporomandibular joint osteoarthritis

This study aims to construct a composite system of the tri-block polyethylene glycol injectable hydrogel (3B-PEG IH) and neural epithelial growth factor-like protein 1 (Nell-1), and to analyze its therapeutic effect on temporomandibular joint osteoarthritis (TMJOA). Sol-gel transition temperature was measured via inverting test. The viscoelastic modulus curves was measured by rheometer. Degradation and controlled release profiles of 3B-PEG IH were drawnin vitro.In vivogel retention and biocompatibility were completed subcutaneously on the back of rats. After primary chondrocytes were extracted and identified, the cell viability in 3B-PEG IH was measured. Evaluation of gene expression in hydrogel was performed by real-time polymerase chain reaction. TMJOA rabbits were established by intra-articular injection of type II collagenase. Six weeks after composite systems being injected, gross morphological score, micro-CT, histological staining and grading were evaluated. The rusults showed that different types of 3B-PEG IH all reached a stable gel state at 37 °C and could support the three-dimensional growth of chondrocytes, but poly(lactide-co-caprolactone)-block-poly(ethyleneglycol)-block-poly(lactide-co-caprolactone) (PLCL-PEG-PLCL) hydrogel had a wider gelation temperature range and better hydrolytic stability for about 4 weeks. Its controlled release curve is closest to the zero-order release kinetics.In vitro, PLCL-PEG-PLCL/Nell-1 could promote the chondrogenic expression and reduce the inflammatory expression.In vivo, TMJOA rabbits were mainly characterized by the disorder of cartilage structure and the destruction of subchondral bone. However, PLCL-PEG-PLCL/Nell-1 could reverse the destruction of the subchondral trabecula, restore the fibrous and proliferative layers of the surface, and reduce the irregular hyperplasia of fibrocartilage layer. In conclusion, by comparing the properties of different 3B-PEG IH, 20 wt% PLCL-PEG-PLCL hydrogel was selected as the most appropriate material. PLCL-PEG-PLCL/Nell-1 composite could reverse osteochondral damage caused by TMJOA, Nfatc1-Runx3 signaling pathway may play a role in it. This study may provide a novel, minimally-invasive therapeutic strategy for the clinical treatment of TMJOA.

Fabrication of a Polycaprolactone/Alginate Bipartite Hybrid Scaffold for Osteochondral Tissue Using a Three-Dimensional Bioprinting System

Osteochondral defects, including damage to both the articular cartilage and the subchondral bone, are challenging to repair. Although many technological advancements have been made in recent years, there are technical difficulties in the engineering of cartilage and bone layers, simultaneously. Moreover, there is a great need for a valuable in vitro platform enabling the assessment of osteochondral tissues to reduce pre-operative risk. Three-dimensional (3D) bioprinting systems may be a promising approach for fabricating human tissues and organs. Here, we aimed to develop a polycaprolactone (PCL)/alginate bipartite hybrid scaffold using a multihead 3D bioprinting system. The hybrid scaffold was composed of PCL, which could improve the mechanical properties of the construct, and alginate, encapsulating progenitor cells that could differentiate into cartilage and bone. To differentiate the bipartite hybrid scaffold into osteochondral tissue, a polydimethylsiloxane coculture system for osteochondral tissue (PCSOT) was designed and developed. Based on evaluation of the biological performance of the novel hybrid scaffold, the PCL/alginate bipartite scaffold was successfully fabricated; importantly, our findings suggest that this PCSOT system may be applicable as an in vitro platform for osteochondral tissue engineering.

Cross-talk between synovial fibroblasts and chondrocytes in condylar hyperplasia: an in vitro pilot study

OBJECTIVE

Increasing evidence indicates an interaction between the synovium and the cartilage in the temporomandibular joint (TMJ) and other joints. We recently demonstrated that the expression of proangiogenic factors was enhanced and that of factors promoting matrix degradation was decreased in synovial fibroblasts in condylar hyperplasia (CH). The aim of this study was to explore whether CH chondrocytes can affect the expression of these factors of synovial fibroblasts in a co-culture system.

STUDY DESIGN

The expressions of vascular endothelial growth factor (VEGF), cluster of differentiation 34 (CD34), fibroblast growth factor 2 (FGF-2), and tissue inhibitor of metalloproteinase 1 (TIMP1) from CH condylar tissues were observed by using immunohistochemical methods. Synovial fibroblasts of control tissues were co-cultured with the chondrocytes of CH, and protein expressions of VEGF, FGF-2, thrombospondin 1 (TSP1), matrix metalloproteinase 3 (MMP3), and TIMP1 were examined by using Western blotting.

RESULTS

Positive staining for VEGF, CD34, FGF-2, and TIMP1 was found in the hypertrophic cartilage layer of CH condylar tissues. Protein expressions of VEGF, FGF-2, and TIMP1 were significantly increased in co-cultured synovial fibroblasts, but TSP1 and MMP3 expressions were decreased.

CONCLUSIONS

The angiogenic factors and matrix degradation-related factors in synovial fibroblasts co-cultured with CH chondrocytes showed the same trends as those in synovial fibroblasts from CH tissue, suggesting potential cross-talk between synovial fibroblasts and chondrocytes during CH progression.

Perspectives on Synthetic Materials to Guide Tissue Regeneration for Osteochondral Defect Repair

Regenerative engineering holds the potential to treat clinically pervasive osteochondral defects (OCDs). In a synthetic materials-guided approach, the scaffold's chemical and physical properties alone instruct cellular behavior in order to effect regeneration, referred to herein as "instructive" properties. While this alleviates the costs and off-target risks associated with exogenous growth factors, the scaffold must be potently instructive to achieve tissue growth. Moreover, toward achieving functionality, such a scaffold should also recapitulate the spatial complexity of the osteochondral tissues. Thus, in addition to the regeneration of the articular cartilage and underlying cancellous bone, the complex osteochondral interface, composed of calcified cartilage and subchondral bone, should also be restored. In this Perspective, we highlight recent synthetic-based, instructive osteochondral scaffolds that have leveraged new material chemistries as well as innovative fabrication strategies. In particular, scaffolds with spatially complex chemical and morphological features have been prepared with electrospinning, solvent-casting-particulate-leaching, freeze-drying, and additive manufacturing. While few synthetic scaffolds have advanced to clinical studies to treat OCDs, these recent efforts point to the promising use of the chemical and physical properties of synthetic materials for regeneration of osteochondral tissues.

Biomimetic polyvinyl alcohol/type II collagen hydrogels for cartilage tissue engineering

Type II collagen (Col-II) is one of the important organic components of the cartilage extracellular matrix (ECM). Such natural material is known for its good biocompatibility, but it could not provide a good supporting environment for seed cells due to its rapid degradation and poor strength. In the present work, different contents of Col-II were incorporated into porous polyvinyl alcohol (PVA) to fabricate porous PVA/Col-II composite hydrogels for cartilage tissue engineering. The results illustrate that, after incorporation of Col-II, the elasticity modulus of the composite hydrogels firstly increases, and then decreases (under moisture state). The elasticity modulus of PVA/Col-II (at the ratio of 1:1) hydrogels reaches 11 ± 1.7 KPa, about two-fold higher than pure PVA hydrogels (4.9 ± 0.6 KPa). Meanwhile, all hydrogels exhibit relatively high water content (> 95%) and porosity (> 75%). The degradation analysis indicates that Col-II incorporation induce a high degradation ratio of the composite hydrogels. Cell culture results show PVA/Col-II hydrogels have no negative effects on cells viability and proliferation. The PVA/Col-II hydrogels may possess a potential application in the field of articular cartilage tissue engineering and regeneration.

Synthesis and characterization of antibacterial drug loaded β-tricalcium phosphate powders for bone engineering applications

Powders of β-tricalcium phosphate [β-TCP, β-Ca₃(PO₄)₂] and composite powders of β-TCP and polyvinyl alcohol (PVA) were synthesized by using wet precipitation methods. First, the conditions for the preparation of single phase β-TCP have been delineated. In the co-precipitation procedure, calcium nitrate and diammonium hydrogen phosphate were used as calcium and phosphorous precursors, respectively. The pH of the system was varied in the range 7-11 by adding designed amounts of ammonia solution. The filtered cakes were desiccated at 80 °C and subsequently calcined at different temperatures in the range between 700-1100 °C. Later on, rifampicin form II was used to produce drug-loaded β-TCP and PVA/β-TCP powders. All the synthesized materials have been characterized from morphological (by scanning electron microscopy) and structural-chemical (by X-ray diffraction and Fourier transform infrared spectroscopy) point of view. The drug loading capacity of the selected pure β-TCP powder has been assessed. The biological performance (cytocompatibility in fibroblast cell culture and antibacterial efficacy against Escherichia coli and Staphylococcus aureus) has been tested with promising results. Application perspectives of the designed drug-bioceramic-polymer blends are advanced and discussed.

Mussel-Inspired Tough Hydrogel with In Situ Nanohydroxyapatite Mineralization for Osteochondral Defect Repair

Repairing osteochondral defects is a considerable challenge because it involves the breakdown of articular cartilage and underlying bone. Traditional hydrogels with a homogenized single-layer structure cannot fully restore the function of osteochondral cartilage tissue. In this study, a mussel-inspired hydrogel with a bilayer structure is developed to repair osteochondral defects. The hydrogel is synthesized by simultaneously polymerizing two layers using a one-pot method. The resulting upper and lower gelatin methacryloyl-polydopamine hydrogel layers are used as cartilage and subchondral bone repair layers, respectively. Polydopamine-induced hydroxyapatite in situ mineralization takes place in the lower layer to mimic the structure of subchondral bone. The bilayer hydrogel exhibits good mechanical properties for the synergistic effect of covalent and noncovalent bonds, as well as nanoreinforcement of mineralized hydroxyapatite. To improve the tissue-inducibility of hydrogels, transforming growth factor β₃ is immobilized in the upper layer to induce cartilage regeneration, while bone morphogenetic protein 2 is immobilized in the lower layer to induce bone regeneration. Bone and cartilage repair performance of the hydrogel is examined by implantation into a full-thickness cartilage defect of a rabbit knee joint. The bilayer-structure hydrogel promotes regeneration of osteochondral tissue, thus providing a new option for repair of osteochondral defects.

Carbon nanotube reinforced polyvinyl alcohol/biphasic calcium phosphate scaffold for bone tissue engineering

In this paper, a well-developed porous carbon nanotube (CNT) reinforced polyvinyl alcohol/biphasic calcium phosphate (PVA/BCP) scaffold was fabricated by a freeze-thawing and freeze-drying method. The microstructure, mechanical properties and the composition of the scaffolds were characterized by field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). The results illustrate that after the incorporation of CNTs, the compressive strength of the hydrogels (moisture state) reached 81 ± 6 kPa, presenting a significantly higher value than that of pure PVA/BCP hydrogels (48 ± 2 kPa). Meanwhile, CNT reinforced PVA/BCP scaffolds exhibited a porous structure and high interconnectivity (80 ± 0.6%). The degradation analysis indicated that the degradation ratio of scaffolds can be varied by changing the concentrations of BCP powders and CNTs. Cell culture results show that PVA/BCP/CNT porous scaffolds have no negative effects on the survival and proliferation of cells. These results strongly show that the composite scaffolds may possess a potential application in the field of bone tissue engineering and regeneration.

In this paper, a well-developed porous carbon nanotube (CNT) reinforced polyvinyl alcohol/biphasic calcium phosphate (PVA/BCP) scaffold was fabricated by a freeze-thawing and freeze-drying method.

Biomimetic Scaffolds for Bone Tissue Engineering

The use of biomimetic scaffolds for bone tissue engineering has been studied for a long time. Biomimetic scaffolds can assist and accelerate bone regeneration that is similar to that of authentic tissue, which represents the environment of cells in a living organism. Currently, numerous biomaterials have been reported for use as a biomimetic scaffold. This review focuses on the design of biomimetic scaffolds, kinds of biomaterials and methods used to fabricate biomimetic scaffolds, growth factors used with biomimetic scaffold for bone regeneration, mobilization of biological agents into biomimetic scaffolds, and studies on (pre)clinical bone regeneration from biomimetic scaffolds. Then, future prospects for biomimetic scaffolds are discussed.