A three-layered hollow tubular scaffold as an enhancement of nerve regeneration potential

Degradation behaviour of porous poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) scaffolds in cell culture

Exploring the degradation behaviour of biomaterials in a complex in vitro physiological environment can assist in predicting their performance in vivo, yet this aspect remains largely unexplored. In this study, the in vitro degradation over 12 weeks of porous poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) bone scaffolds in human osteoblast (hOB) culture was investigated. The objective was to evaluate how the presence of cells influenced both the degradation behaviour and mechanical stability of these scaffolds. The molecular weight (Mw) of the scaffolds decreased with increasing incubation time and the Mw reduction rate (6.2 ± 0.4 kg mol-1 week-1) was similar to that observed when incubated in phosphate buffered saline (PBS) solution, implying that the scaffolds underwent hydrolytic degradation in hOB culture. The mass of the scaffolds increased by 0.8 ± 0.2 % in the first 4 weeks, attributed to cells attachment and extracellular matrix (ECM) deposition including biomineralisation. During the first 8 weeks, the nominal compressive modulus, E⁎, of the scaffolds remained constant. However, it increased significantly from Week 8 to 12, with increments of 55 % and 42 % in normal and lateral directions, respectively, attributed to the reinforcement effect of cells, ECM and minerals attached on the surface of the scaffold. This study has highlighted, that while the use of PBS in degradation studies is suitable for evaluating Mw changes it cannot predict changes in mechanical properties to PHBV scaffolds in the presence of cells and culture media. Furthermore, the PHBV scaffolds had mechanical stability in cell culture for 12 weeks validating their suitability for tissue engineering applications.

Engineering Tissues of the Central Nervous System: Interfacing Conductive Biomaterials with Neural Stem/Progenitor Cells

Conductive biomaterials provide an important control for engineering neural tissues, where electrical stimulation can potentially direct neural stem/progenitor cell (NS/PC) maturation into functional neuronal networks. It is anticipated that stem cell-based therapies to repair damaged central nervous system (CNS) tissues and ex vivo, "tissue chip" models of the CNS and its pathologies will each benefit from the development of biocompatible, biodegradable, and conductive biomaterials. Here, technological advances in conductive biomaterials are reviewed over the past two decades that may facilitate the development of engineered tissues with integrated physiological and electrical functionalities. First, one briefly introduces NS/PCs of the CNS. Then, the significance of incorporating microenvironmental cues, to which NS/PCs are naturally programmed to respond, into biomaterial scaffolds is discussed with a focus on electrical cues. Next, practical design considerations for conductive biomaterials are discussed followed by a review of studies evaluating how conductive biomaterials can be engineered to control NS/PC behavior by mimicking specific functionalities in the CNS microenvironment. Finally, steps researchers can take to move NS/PC-interfacing, conductive materials closer to clinical translation are discussed.

Graphene oxide encapsulated forsterite scaffolds to improve mechanical properties and antibacterial behavior

It is very desirable to have good antibacterial properties and mechanical properties at the same time for bone scaffolds. Graphene oxide (GO) can increase the mechanical properties and antibacterial performance, while forsterite (Mg2SiO4) as the matrix can increase forsterite/GO scaffolds' biological activity for bone tissue engineering. Interconnected porous forsterite scaffolds were developed by space holder processes for bone tissue engineering in this research. The forsterite/GO scaffolds had a porosity of 76-78% with pore size of 300-450 μm. The mechanism of the mechanical strengthening, antibacterial activity, and cellular function of the forsterite/GO scaffold was evaluated. The findings show that the compressive strength of forsterite/1wt.% GO scaffold (2.4±0.1 MPa) was significantly increased, in comparison to forsterite scaffolds without GO (1.4±0.1 MPa). Validation of the samples' bioactivity was attained by forming a hydroxyapatite (HAp) layer on the forsterite/GO surface within in vitro immersion test. The results of cell viability demonstrated that synthesized forsterite scaffolds with low GO did not show cytotoxicity and enhanced cell proliferation. Antibacterial tests showed that the antibacterial influence of forsterite/GO scaffold was strongly correlated with GO concentration from 0.5 to 2 wt.%. The scaffold encapsulated with 2wt.% GO had the great antibacterial performance with bacterial inhibition rate around 90%. As results show, the produced forsterite/1wt.% GO can be an attractive option for bone tissue engineering.

Avian Eggshell Membrane as a Novel Biomaterial: A Review

The eggshell membrane (ESM), mainly composed of collagen-like proteins, is readily available as a waste product of the egg industry. As a novel biomaterial, ESM is attractive for its applications in the nutraceutical, cosmetic, and pharmaceutical fields. This review provides the main information about the structure and chemical composition of the ESM as well as some approaches for its isolation and solubilization. In addition, the review focuses on the role and performance of bioactive ESM-derived products in various applications, while a detailed literature survey is provided. The evaluation of the safety of ESM is also summarized. Finally, new perspectives regarding the potential of ESM as a novel biomaterial in various engineering fields are discussed. This review provides promising future directions for comprehensive application of ESM.

Recent Advances on Bioprinted Gelatin Methacrylate-Based Hydrogels for Tissue Repair

Bioprinting of body tissues has gained great attention in recent years due to its unique advantages, including the creation of complex geometries and printing the patient-specific tissues with various drug and cell types. The most momentous part of the bioprinting process is bioink, defined as a mixture of living cells and biomaterials (especially hydrogels). Among different biomaterials, natural polymers are the best choices for hydrogel-based bioinks due to their intrinsic biocompatibility and minimal inflammatory response in body condition. Gelatin methacryloyl (GelMA) hydrogel is one of the high-potential hydrogel-based bioinks due to its easy synthesis with low cost, great biocompatibility, transparent structure that is useful for cell monitoring, photocrosslinkability, and cell viability. Furthermore, the potential of adjusting properties of GelMA due to the synthesis protocol makes it a suitable choice for soft or hard tissues. In this review, different methods for the bioprinting of GelMA-based bioinks, as well as various effective process parameters, are reviewed. Also, several solutions for challenges in the printing of GelMA-based bioinks are discussed, and applications of GelMA-based bioprinted tissues argued as well. Impact statement Bioprinting has been demonstrated as a promising and alternative approach for organ transplantation to develop various types of living tissue. Bioinks, with great biological characteristics similar to the host tissues and rheological/flow features, are the first requirements for the successful bioprinting approach. Gelatin methacryloyl (GelMA) hydrogel is one of the high-potential hydrogel-based bioinks. This review provides a comprehensive look at different methods for the bioprinting of GelMA-based bioinks and applications of GelMA-based bioprinted tissues for tissue repair.

Tissue engineering of the retina: from organoids to microfluidic chips

Despite advancements in tissue engineering, challenges remain for fabricating functional tissues that incorporate essential features including vasculature and complex cellular organisation. Monitoring of engineered tissues also raises difficulties, particularly when cell population maturity is inherent to function. Microfluidic, or lab-on-a-chip, platforms address the complexity issues of conventional 3D models regarding cell numbers and functional connectivity. Regulation of biochemical/biomechanical conditions can create dynamic structures, providing microenvironments that permit tissue formation while quantifying biological processes at a single cell level. Retinal organoids provide relevant cell numbers to mimic in vivo spatiotemporal development, where conventional culture approaches fail. Modern bio-fabrication techniques allow for retinal organoids to be combined with microfluidic devices to create anato-physiologically accurate structures or 'retina-on-a-chip' devices that could revolution ocular sciences. Here we present a focussed review of retinal tissue engineering, examining the challenges and how some of these have been overcome using organoids, microfluidics, and bioprinting technologies.