Strontium ranelate simultaneously improves the radiopacity and osteogenesis of calcium phosphate cement

Regulation of osteogenesis and angiogenesis by cobalt, manganese and strontium doped apatitic materials for functional bone tissue regeneration

Strontium, cobalt, and manganese ions are present in the composition of bone and useful for bone metabolism, even when combined with calcium phosphate in the composition of biomaterials. Herein we explored the possibility to include these ions in the composition of apatitic materials prepared through the cementitious reaction between ion-substituted calcium phosphate dibasic dihydrate, CaHPO4·2H2O (DCPD) and tetracalcium phosphate, Ca4(PO4)2O (TTCP). The results of the chemical, structural, morphological and mechanical characterization indicate that cobalt and manganese exhibit a greater delaying effect than strontium (about 15 at.%) on the cementitious reaction, even though they are present in smaller amounts within the materials (about 0.8 and 4.5 at.%, respectively). Furthermore, the presence of the foreign ions in the apatitic materials leads to a slight reduction of porosity and to enhancement of compressive strength. The results of biological tests show that the presence of strontium and manganese, as well as calcium, in the apatitic materials cultured in direct contact with human mesenchymal stem cells (hMSCs) stimulates their viability and activity. In contrast, the apatitic material containing cobalt exhibits a lower metabolic activity. All the materials have a positive effect on the expression of Vascular Endothelial Growth Factor (VEGF) and Von Willebrand Factor (vWF). Moreover, the apatitic material containing strontium induces the most significant reduction in the differentiation of preosteoclasts into osteoclasts, demonstrating not only osteogenic and angiogenic properties, but also ability to regulate bone resorption.

A Comparative Study on Physicochemical Properties and In Vitro Biocompatibility of Sr-Substituted and Sr Ranelate-Loaded Hydroxyapatite Nanoparticles

Synthetic hydroxyapatite nanoparticles (nHAp) possess compositional and structural similarities to those of bone minerals and play a key role in bone regenerative medicine. Functionalization of calcium phosphate biomaterials with Sr, i.e., bone extracellular matrix trace element, has been proven to be an effective biomaterial-based strategy for promoting osteogenesis in vitro and in vivo. Functionalizing nHAp with Sr2+ ions or strontium ranelate (SrRAN) can provide favorable bone tissue regeneration by locally delivering bioactive molecules to the bone defect microenvironment. Moreover, administering an antiosteoporotic drug, SrRAN, directly into site-specific bone defects could significantly reduce the necessary drug dosage and the risk of possible side effects. Our study evaluated the impact of the Sr source (Sr2+ ions and SrRAN) used to functionalize nHAp by wet precipitation on its in vitro cellular activities. The systematic comparison of physicochemical properties, in vitro Sr2+ and Ca2+ ion release, and their effect on in vitro cellular activities of the developed Sr-functionalized nHAp was performed. The ion release tests in TRIS-HCl demonstrated a 21-day slow and continuous release of the Sr2+ and Ca2+ ions from both Sr-substituted nHAp and SrRAN-loaded HAp. Also, SrRAN and Sr2+ ion release kinetics were evaluated in DMEM to understand their correlation with in vitro cellular effects in the same time frame. Relatively low concentration (up to 2 wt %) of Sr in the nHAp led to an increase in the alkaline phosphatase activity in preosteoblasts and expression of collagen I and osteocalcin in osteoblasts, demonstrating their ability to boost bone formation.

Improving the osseointegration and soft tissue sealing of zirconia ceramics by the incorporation of akermanite via sol infiltration for dental implants

Zirconia ceramics are promising dental implant materials due to their high-grade biocompatibility, high mechanical strength, and distinctive aesthetic appearance. Nevertheless, zirconia ceramics are bio-inert with a lack of osseointegration and soft tissue sealing, which limits dental implant applications. As such, the fabrication of zirconia ceramics with high mechanical strength, excellent osseointegration and soft tissue sealing performance remains a great challenge in the dental restoration field. In this article, a novel zirconia ceramic with akermanite (AKT) modification by the negative pressure infiltration method is presented. The effects of AKT sol infiltration at different times on the morphology, phase composition, mechanical properties, bioactivity, osseointegration and soft tissue sealing of the modified zirconia ceramics have been systematically investigated. The modified zirconia ceramics feature excellent mechanical properties and significantly improved surface roughness, hydrophilia, and apatite mineralization ability as compared with unmodified zirconia ceramics. Furthermore, cell-culture experiment results indicated that the surface modification of zirconia ceramics could promote adhesion, spreading, migration, proliferation and osteogenic differentiation of mouse bone marrow stromal stem cells (mBMSCs), as well as the early adhesion, spreading, proliferation and fibroblast differentiation of human gingival fibroblasts (HGFs) in vitro. The prepared bioactive zirconia distinctively enhanced the alkaline phosphate (ALP) activity, osteogenesis-related gene expression of mBMSCs and fibroblast-related-gene expression of HGFs. The in vivo evaluation confirmed that 15-TZP ceramics could promote bone-implant osseointegration to the greatest extent as compared with pure zirconia ceramics. To conclude, our research has shown that AKT-modified zirconia ceramics can achieve bone integration and soft tissue sealing, indicating that they have a lot of potential for application as a novel dental implant material in the clinical setting.

The Osteogenic Properties of Calcium Phosphate Cement Doped with Synthetic Materials: A Structured Narrative Review of Preclinical Evidence

Bone grafting is commonly used as a treatment to repair bone defects. However, its use is challenged by the presence of medical conditions that weaken the bone, like osteoporosis. Calcium phosphate cement (CPC) is used to restore bone defects, and it is commonly available as a bioabsorbable cement paste. However, its use in clinical settings is limited by inadequate mechanical strength, inferior anti-washout characteristics, and poor osteogenic activity. There have been attempts to overcome these shortcomings by adding various natural or synthetic materials as enhancers to CPC. This review summarises the current evidence on the physical, mechanical, and biological properties of CPC after doping with synthetic materials. The incorporation of CPC with polymers, biomimetic materials, chemical elements/compounds, and combination with two or more synthetic materials showed improvement in biocompatibility, bioactivity, anti-washout properties, and mechanical strength. However, the mechanical property of CPC doped with trimethyl chitosan or strontium was decreased. In conclusion, doping of synthetic materials enhances the osteogenic features of pure CPC. The positive findings from in vitro and in vivo studies await further validation on the efficacy of these reinforced CPC composites in clinical settings.

An injectable porous bioactive magnesium phosphate bone-cement foamed with calcium carbonate and citric acid for periodontal bone regeneration

Magnesium phosphate cement (MPC) has been evaluated as a novel bone substitute owing to its favorable biocompatibility, plasticity, and osteogenic potential. However, the low porosity of MPC prevents growth factors and osteoblasts from fully growing into the material, thereby limiting its clinical use. In this study, different concentrations (0-5%) of calcium carbonate and citric acid (CA) were used as foaming agents to prepare porous MPC. The MPC containing 3% CaCO₃/CA exhibited the best physicochemical properties, including greater porosity, improved injectability, extended setting time, and decreased hydration temperature. The proliferation and adhesion of cells on 3%CaCO₃/CA-MPC were higher than those on MPC alone. To explore its osteogenesis in vivo, 3% CaCO₃/CA-MPC and Bio-Oss® bone powder were implanted into periodontal bone defects in rats for 4 weeks and 12 weeks, respectively. Micro-CT and histological analysis demonstrated the improved bone regeneration of 3%CaCO₃/CA-MPC compared to the blank group (P < 0.05); it had slightly lower bone regeneration than the Bio-Oss® group but no statistical difference. The results indicated that porous MPC foamed with calcium carbonate and CA improved its physicochemical properties and enhanced its biocompatibility, making it a promising material for bone regeneration.

Recent advances on bioactive baghdadite ceramic for bone tissue engineering applications: 20 years of research and innovation (a review)

Various artificial bone graft substitutes based on ceramics have been developed over the last 20 years. Among them, calcium-silicate-based ceramics, which are osteoconductive and can attach directly to biological organs, have received great attention for bone tissue engineering applications. However, the degradation rate of calcium-silicate and bone formation is often out of balance, resulting in stress shielding (osteopenia). A new strategy to improve the drawbacks of these ceramics is incorporating trace elements such as Zn, Mg, and Zr into their lattice structures, enhancing their physical and biological properties. Recently, baghdadite (Ca₃ZrSi₂O₉) ceramic, one of the most appealing calcium-silicate-based ceramics, has demonstrated high bioactivity, biocompatibility, biodegradability, and cell interaction. Because of its physical, mechanical, and biological properties and ability to be shaped using various fabrication techniques, baghdadite has found high potential in various biomedical applications such as coatings, fillers, cement, scaffolds, and drug delivery systems. Undoubtedly, there is a high potential for this newly developed ceramic to contribute significantly to therapies to provide a tremendous clinical outcome. This review paper aims to summarize and discuss the most relevant studies performed on baghdadite-based ceramics and composites by focusing on their behavior in vivo and in vitro.

2-Amino-4,5-dihydrothiophene-3-carbonitriles: A New Synthesis, Quantum Chemical Studies, and Mannich-Type Reactions Leading to New Hexahydrothieno[2,3-d]pyrimidines

trans-2-Amino-4-aryl-5-benzoyl-4,5-dihydrothiophene-3-carbonitriles were prepared either by the reaction of 3-aryl-2-cyanothioacrylamides with α-thiocyanatoacetophenone or by the Michael-type addition of cyanothioacetamide to α-bromochalcones followed by intramolecular cyclization. The mechanism of the first reaction was studied using high-level quantum chemical calculations. Density functional theory (DFT) studies were carried out to determine the mechanism of the first reaction. A new approach toward the construction of the thieno[2,3-d]pyrimidine core system was demonstrated by the reaction of the prepared dihydrothiophenes with HCHO and RNH2 under noncatalyzed Mannich conditions.

Development of a bioactive and radiopaque bismuth doped baghdadite ceramic for bone tissue engineering

Baghdadite (Ca₃ZrSi₂O₉, BAG), is a Zr-doped calcium silicate that has outstanding bioactivity both in vitro and in vivo. Bioceramic scaffolds should be sufficiently radiopaque to be distinguishable in vivo from surrounding bone structures. To enhance the radiopacity of BAG, this study investigated the effect of incorporating bismuth ions into its crystalline structure (Bi_xCa_3-xZrSi₂O₉, x = 0, 0.1, 0.2, 0.5; BAG, Bi0.1-BAG, Bi0.2-BAG, Bi0.5-BAG, respectively). Monophasic baghdadite was retained after bismuth ion incorporation up to x = 0.2 at calcination temperatures of 1350 °C. When pressed and sintered, energy dispersive x-ray spectroscopy showed that BAG and Bi0.1-BAG retained crystalline homogeneity, but Bi0.2-BAG formed zirconium-rich crystalline regions. BAG, Bi0.1-BAG and Bi0.2-BAG exhibited non-degradation after 56 days of immersion in culture medium. Bi0.1-BAG exhibited the lowest change in culture medium pH (+0.0), compared to BAG (+0.7) and Bi0.2-BAG (+0.2) after 56 days of culture media immersion. Bi0.1-BAG exhibited similar strength and modulus to BAG (σ: 200-290 MPa; E: 4-5 GPa), and significantly higher compressive strength and modulus versus Bi0.2-BAG (σ: 150-200 MPa; E: 3.5-4 GPa) across 56 days of aqueous immersion. In vitro studies using primary human bone derived cells (HOBs) demonstrated a significant increase in HOBs proliferation when cultured on Bi0.1-BAG for seven days compared to BAG and Bi0.2-BAG. Importantly, Bi0.1-BAG showed increased radiopacity by ~33%, when compared to BAG, and by ~115% when compared to biphasic calcium phosphate. The properties of Bi0.1-BAG show promise for its use as a bioactive ceramic with sufficient radiopacity for treatment of bone defects.

Intrinsically radiopaque and antimicrobial cellulose based surgical sutures from mechanically powerful Agave sisalana plant leaf fibers

The judicious configuration of a flexible radiopaque suture would be exemplary to facilitate effortless tracking and precise diagnosis of the sutured surgical site by various X-ray assisted imaging modalities and simultaneously serve as a complementary tool for monitoring the fate of the suture material during the post-operative course. A unique radiopaque cellulose based surgical suture (RF) with good mechanical properties was developed by strategically controlled mercerization and bleaching of mechanically strong natural cellulosic fibers extracted from Agave sisalana plant leaves followed by the facile dip-coating of SrO integrated polylactic acid (PLA). RF exhibited admirable straight-pull tensile strength (184 MPa) and commendable contrast enhancement (277.4%) under digital X-ray radiographic imaging which was further validated by micro-CT analysis. Further, RF has a controlled hydrolytic degradation profile favorable for surgical suturing (mass loss ∼22% in 28 days). The microporous surface architecture of RF (pore size < 10 μm) as a result of SrO-PLA coating enabled the loading of antibiotic (ciprofloxacin) deep inside the pores with a cumulative release of 24% at 28 days under physiological conditions substantiating its feasibility to be used as an efficient antimicrobial suture (CRF) that prevents possible bacterial infections at the surgical site. This has been demonstrated by antibacterial disc diffusion assay performed against two Gram-positive and two Gram-negative bacterial strains. Significantly, both RF and CRF are highly biocompatible as confirmed by MTT assay and F-actin staining. Hence, CRF would be a good biocompatible suture candidate holding good tensile properties, exceptional antimicrobial property and intrinsic radiopacity retention for a period >28 days.

Bioactive strontium ions/ginsenoside Rg1-incorporated biodegradable silk fibroin-gelatin scaffold promoted challenging osteoporotic bone regeneration

Autogenous healing of osteoporotic fractures is challenging, as the regenerative capacity of bone tissues is impaired by estrogen reduction and existed pro-inflammatory cytokines. In this study, a biofunctional ginsenoside Rg1 and strontium-containing mineral (SrHPO₄, SrP)-incorporated biodegradable silk fibroin-gelatin (SG) scaffold (Rg1/SrP/SG) was developed to stimulate the osteoporotic bone repair. The incorporation of 15 wt% SrP significantly enhanced the mechanical strength, stimulated the osteogenic differentiation of mouse bone marrow mesenchymal stem cells, and suppressed the osteoclastogenesis of RAW264.7 in a concentration-related manner. The loading of Rg1 in SG and 15SrP/SG scaffolds obviously promoted the angiogenesis of human umbilical vein endothelial cells via activating the expression of vascular endothelial growth factor and basic fibroblast growth factor genes and proteins. The bioactive strontium ions (Sr²⁺) and Rg1 released from the scaffolds together mediated lipopolysaccharide-treated macrophages polarizing into M2 type. They downregulated the expression of inflammatory-related genes (interleukin (IL)-1β, tumor necrosis factor α, and IL-6) and stimulated the expression of genes related to anti-inflammation (Arginase and IL-10) as well as bone repair (BMP-2 and PDGF-BB) in the macrophages. The in vivo results also displayed that SrP and Rg1 significantly promoted the bone repair effect of SG scaffolds in osteoporotic critical-sized calvarial defects. Besides, the degradation rate of the scaffolds was close to the bone regeneration rate. Therefore, the simultaneous addition of SrP and Rg1 is a promising way for facilitating the osteoporotic bone repair activity of SG scaffolds via promoting the osteogenesis and angiogenesis, as well as inhibiting the osteoclastogenesis and inflammation.

Rapid Fabrication of MgNH4PO4·H2O/SrHPO4 Porous Composite Scaffolds with Improved Radiopacity via 3D Printing Process

Although bone repair scaffolds are required to possess high radiopacity to be distinguished from natural bone tissues in clinical applications, the intrinsic radiopacity of them is usually insufficient. For improving the radiopacity, combining X-ray contrast agents with bone repair scaffolds is an effective method. In the present research, MgNH₄PO₄·H₂O/SrHPO₄ 3D porous composite scaffolds with improved radiopacity were fabricated via the 3D printing technique. Here, SrHPO₄ was firstly used as a radiopaque agent to improve the radiopacity of magnesium phosphate scaffolds. X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS) were used to characterize the phases, morphologies, and element compositions of the 3D porous composite scaffolds. The radiography image showed that greater SrHPO₄ contents corresponded to higher radiopacity. When the SrHPO₄ content reached 9.34%, the radiopacity of the composite scaffolds was equal to that of a 6.8 mm Al ladder. The porosity and in vitro degradation of the porous composite scaffolds were studied in detail. The results show that magnesium phosphate scaffolds with various Sr contents could sustainably degrade and release the Mg, Sr, and P elements during the experiment period of 28 days. In addition, the cytotoxicity on MC3T3-E1 osteoblast precursor cells was evaluated, and the results show that the porous composite scaffolds with a SrHPO₄ content of 9.34% possessed superior cytocompatibility compared to that of the pure MgNH₄PO₄·H₂O scaffolds when the extract concentration was 0.1 g/mL. Cell adhesion experiments showed that all of the scaffolds could support MC3T3-E1 cellular attachment well. This research indicates that MgNH₄PO₄·H₂O/SrHPO₄ porous composite scaffolds have potential applications in the bone repair fields.

A bioactive magnesium phosphate cement incorporating chondroitin sulfate for bone regeneration

Magnesium phosphate cement (MPC) has been evaluated as an inorganic bone filler due to its favorable biocompatibility, biodegradability, rapid setting, high initial strength, and osteogenic potential. However, the setting time of MPC is so rapid that it makes it difficult to use in practice, and the clinical properties of MPC could be further be improved by adding bioactive materials. Here we developed novel bioactive chondroitin sulfate (CS)-MPC composites (CS-MPCs) by incorporating different amounts of CS into MPC. The compositions, microstructures, and physiochemical properties of CS-MPCs and their inducedin vitrocellular responses andin vivobone regeneration properties were evaluated. CS-MPCs had a longer setting time, lower hydration temperature, higher compressive strength, and more neural pH than MPC. CS-MPCs demonstrated similar degradation ratios relative to MPC in Tris-HCl solution. CS-MPCs promoted pre-osteoblast cell proliferation, attachment, and differentiationin vitroand enhanced bone formation surrounding implantsin vivo. In conclusion, through CS modification, our novel CS-MPCs have improved physiochemical properties that enhance compatibilityin vitroand bone regenerationin vivo, making them attractive materials for bone regeneration.

A Novel Fast-Setting Strontium-Containing Hydroxyapatite Bone Cement With a Simple Binary Powder System

In recent years, strontium-substituted calcium phosphate bone cement (Sr-CPC) has attracted more and more attentions in the field of bone tissue repair due to its comprehensive advantages of both traditional CPC and Sr ions. In this study, a crucial Sr-containing α-Ca_{3 - x} Sr _x (PO₄)₂ salt has been synthesized using a simplified one-step method at lower synthesis temperature. A novel Sr-CPC has been developed based on the simple binary Sr-containing α-Ca_{3 - x} Sr _x (PO₄)₂/Ca₄(PO₄)₂O cement powder. The physicochemical properties and hydration mechanism of this Sr-CPC at various Sr contents were intensively investigated. The setting product of this Sr-CPC after a set for 72 h is a single-phase Sr-containing hydroxyapatite, and its compressive strength slightly decreased and its setting time extended with the increase of Sr content. The hydration process included the initial formation of the medium product CaHPO₄⋅2H₂O (30 min∼1 h), the following complete hydration of Ca₄(PO₄)₂O and the initially formed CaHPO₄⋅2H₂O (2∼6 h), and the final self-setting of α-Ca_{3 - x} Sr _x (PO₄)₂ (6 h∼). The compressive strength of Sr-CPC, which was closely related to the transformation rate of Sr-containing hydroxyapatite, tended to increase with the extension of hydration time. In addition, Sr-CPC possessed favorable cytocompatibility and the effect of Sr ions on cytocompatibility of Sr-CPC was not obvious at low Sr contents. The present study suggests α-Ca_{3 - x} Sr _x (PO₄)₂ is a kind of vital Sr-containing salt source which is useful to develop some novel Sr-containing biomaterials. In addition, the new Sr-containing cement system based on this simple binary α-Ca_{3 - x} Sr _x (PO₄)₂/Ca₄(PO₄)₂O cement powder displayed an attractive clinical application potential in orthopedics.

[Effects of calcium phosphate cement combined with hyaluronic acid/curcumin on the proliferation and osteogenesis of osteoblasts]

OBJECTIVE

After using hyaluronic acid (HA) to modify curcumin (CUR), the effects of calcium phosphate cement (CPC) combined with HA/CUR on the proliferation and osteogenesis of osteoblasts were investigated.

METHODS

First, HA and CUR were esterified and covalently combined to prepare HA/CUR, and the characteristics were observed and the infrared spectrum was tested. Then, HA, CUR, and HA/CUR were mixed with CPC according to 5% ( W/ W) to prepare HA-CPC, CUR-CPC, and HA/CUR-CPC, respectively. Setting time detection, scanning electron microscope observation, injectable performance test, and compression strength test were conducted; and the CPC was used as a control. Osteoblasts were isolated and cultured from the skull of newborn Sprague Dawley rats, and the 2nd generation cells were cultured with the 4 types of bone cement, respectively. The effects of HA/CUR-CPC on the proliferation and osteogenesis of osteoblasts were estimated by the scanning electron microscopy observation, live/dead cell fluorescence staining, cell counting, osteopontin (OPN) immunofluorescence staining, alkaline phosphatase (ALP) staining,and alizarin red staining.

RESULTS

Infrared spectroscopy test showed that HA and CUR successfully covalently combined. The HA/CUR-CPC group had no significant difference in initial setting time, final setting time, injectable rate, and compressive strength when compared with the other 3 groups ( P>0.05); scanning electron microscope observation showed that HA/CUR was scattered on CPC surface. After co-culture of bone cement and osteoblasts, scanning electron microscopy observation showed that the osteoblasts, which had normal morphology and the growth characteristics of osteoblasts, clustered and adhered to HA/CUR-CPC. There was no significant difference in cell survival rate between HA/CUR-CPC group and other groups ( P>0.05), and the number of cells significantly increased ( P<0.05); the degrees of OPN immunofluorescence staining, ALP staining, and alizarin red staining were stronger than other groups.

CONCLUSION

HA/CUR-CPC has good biocompatibility and mechanical properties, which can promote the proliferation and osteogenesis of osteoblasts.

Bioinorganic supplementation of calcium phosphate-based bone substitutes to improve in vivo performance: a systematic review and meta-analysis of animal studies

Supplementation of CaP-based bone graft substitutes with bioinorganics such as strontium, zinc or silicon is an interesting approach to increase the biological performance in terms of bone regenerative potential of calcium phosphate (CaP)-based bone substitutes. However, the in vivo efficacy of this approach has not been systematically analyzed, yet. Consequently, we performed a systematic review using the available literature regarding the effect of bioinorganic supplementation in CaP-based biomaterials on new bone formation and material degradation in preclinical animal bone defect models and studied this effect quantitatively by performing a meta-analysis. Additional subgroup analyses were used to study the effect of different bioinorganics, animal model, or phase category of CaP-based biomaterial on bone formation or material degradation. Results show that bioinorganic supplementation increases new bone formation (standardized mean difference [SMD]: 1.43 SD, confidence interval [CI]: 1.13-1.73). Additional subgroup analysis showed that strontium, magnesium and silica significantly enhanced bone formation, while zinc did not have any effect. This effect of bioinorganic supplementation on new bone formation was stronger for DCPD or β-TCP and biphasic CaPs than for HA or α-TCP (p < 0.001). In general, material degradation was slightly hindered by bioinorganic supplementation (mean difference [MD]: 0.84%, CI: 0.01-1.66), with the exception of strontium that significantly enhanced degradation. Overall, bioinorganic supplementation represents an effective approach to enhance the biological performance of CaP-based bone substitutes.