Preparation and characterization of poly(3-hydroxybutyrate-co-4-hydroxybutyrate)/pullulan-gelatin electrospun nanofibers with shell-core structure

Preparation and characterization of multi-network hydrogels based on sodium alginate/krill protein/polyacrylamide-Strength, shape memory, conductivity and biocompatibility

Sodium alginate/krill protein/polyacrylamide (SA/AKP/PAM) hydrogel with "covalent bond-ion complex-hydrogen bond" multi-network structure was prepared by covalent cross-linking and complexion ion crosslinking using SA, AKP, and acrylamide (AM) as raw materials. The effects of ion species (Fe³⁺, Ba²⁺, Sr²⁺, Ca²⁺, and Zn²⁺) on the structure, morphology, and properties of multi-network hydrogels were studied in detail. The results showed that the mechanical strength of ionic cross-linked hydrogels increased significantly. The compressive strength of Fe³⁺ cross-linked hydrogels was 5.56 MPa, 16.13 times that of non-ionic crosslinked hydrogels. The results of ionic conductivity measurements showed that hydrogels had significant ionic conductivity and were sensitive to external forces. Interestingly, the hydrogel can be used as a capacitive pen in mobile phone writing, painting and dialing numbers. Moreover, ionic cross-linked hydrogels had a unique three-dimensional porous structure with gradient distribution, excellent shape memory effect, and good biocompatibility. Fe³⁺, Ba²⁺, Sr²⁺, and Ca²⁺ cross-linked hydrogels were nontoxic and conducive to the adhesion and growth of Schwann cells. These excellent properties of ionic cross-linked SA/AKP/PAM hydrogels have broad applications prospects in flexible electronic devices, sensors, soft electronic skins, and tissue engineering.

Regulated Exogenous/Endogenous Inflammation via "Inner-Outer" Medicated Electrospun Fibers for Promoting Tissue Reconstruction

Regenerative medicine aims to provide solutions for structural and functional recovery in conditions where organs suffer from varying degrees of diseases or injuries. However, the exogenous inflammation triggered by implanted biomaterials and endogenous inflammation caused by some disease or tissue destruction has not been solved properly yet. Herein, a functional "inner-outer" medicated core-shell electrospun fibrous membrane is fabricated with RGD surface modification for exogenous inflammation suppression and puerarin loading in the core for long-term endogenous inflammation inhibition through microsol electrospinning technique. The "outer" RGD significantly increases biocompatibility of fibrous membrane through promoting cell viability, adhesion, and proliferation while the "inner" puerarin suppresses inflammatory gene expression via sustained drug release in vitro. Moreover, in a rat abdominal wall hernia model, the functional fibrous membrane successfully reduces exogenous and endogenous inflammation response and promotes wound healing through collagen deposition, smooth muscle formation, and vascularization. In summary, the functional "inner-outer" medicated fibrous membrane holds a great potential for clinical treatment of diseases that needs tissue reconstruction structurally and functionally accompanied by immunoregulation.

AK, Ramakrishna S, Amirul AAA. Surface Modification of Sponge-like Porous Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)/Gelatine Blend Scaffolds for Potential Biomedical Applications

In this study, we described the preparation of sponge-like porous scaffolds that are feasible for medical applications. A porous structure provides a good microenvironment for cell attachment and proliferation. In this study, a biocompatible PHA, poly(3-hydroxybutyrate-co-4-hydroxybutyrate) was blended with gelatine to improve the copolymer's hydrophilicity, while structural porosity was introduced into the scaffold via a combination of solvent casting and freeze-drying techniques. Scanning electron microscopy results revealed that the blended scaffolds exhibited higher porosity when the 4HB compositions of P(3HB-co-4HB) ranged from 27 mol% to 50 mol%, but porosity decreased with a high 4HB monomer composition of 82 mol%. The pore size, water absorption capacity, and cell proliferation assay results showed significant improvement after the final weight of blend scaffolds was reduced by half from the initial 0.79 g to 0.4 g. The pore size of 0.79g-(P27mol%G10) increased three-fold while the water absorption capacity of 0.4g-(P50mol%G10) increased to 325%. Meanwhile, the cell proliferation and attachment of 0.4g-(P50mol%G10) and 0.4g-(P82mol%G7.5) increased as compared to the initial seeding number. Based on the overall data obtained, we can conclude that the introduction of a small amount of gelatine into P(3HB-co-4HB) improved the physical and biological properties of blend scaffolds, and the 0.4g-(P50mol%G10) shows great potential for medical applications considering its unique structure and properties.

Electrostatic Interaction-Based Fabrication of Calcium Alginate-Zein Core-Shell Microcapsules of Regulable Shapes and Sizes

Core-shell microcapsules with combined features of hydrophilicity and hydrophobicity have become much popular. However, the assembly of biocompatible and edible materials in hydrophilic-hydrophobic core-shell microcapsules is not easy. In this work, based on electrostatic interactions, we prepared controllable calcium alginate (ALG)-zein core-shell particles of different shapes and sizes using hydrophilic ALG and hydrophobic zein by a two-step extrusion method. Negatively charged hydrogel beads of spherical, ellipsoidal, or fibrous shape were added into a positively charged zein solution (dissolved in 70% (v/v) aqueous ethanol solution) to achieve different-shaped core-shell particles. Interestingly, the size, shape, and shell thickness of the particles can be regulated by the needle diameter, stirring speed, and zein concentration. Moreover, for simplification, the core-shell particles were also synthesized by a one-step extrusion method, in which an ALG solution was added dropwise into a 70% (v/v) aqueous ethanol solution containing zein and CaCl₂. The particles synthesized in this work showed controlled digestion of encapsulated medium-chain triglyceride (MCT) and sustained release of encapsulated thiamine and ethyl maltol. Our preparation method is simplistic and can be extended to fabricate a variety of hydrophilic and hydrophobic core-shell structures to encapsulate a broad spectrum of materials.

Polysaccharides as wall material for the encapsulation of essential oils by electrospun technique

Electrospinning is a versatile, inexpensive and reliable technique for the synthesis of nanometric fibers or particles from polymeric solutions, under a high voltage electric field. The use of natural polysaccharides such as starch, chitosan, pectin, alginate, pullulan, cellulose and dextran as polymeric materials allows the formation of biodegradable fibers and capsules. Bioactive compounds extracted from natural sources, such as essential oils, have been widely studied due to their antioxidant, antimicrobial and antifungal properties. The combination of natural polymers and the electrospinning technique allows the production of structures capable of incorporating these bioactive compounds, which are highly sensitive to degradation reactions. This review describes several approaches to the development of nanofibers and nanocapsules from polysaccharides and the possibility of incorporating hydrophobic compounds, such as essential oils. The review also discusses the use of electrosprayed products incorporated with essential oils for direct application in food or for use as active food packaging.

AK, Ramakrishna S, Amirul AAA. Surface Characterization and Physiochemical Evaluation of P(3HB-co-4HB)-Collagen Peptide Scaffolds with Silver Sulfadiazine as Antimicrobial Agent for Potential Infection-Resistance Biomaterial

Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] is a bacterial derived biopolymer widely known for its unique physical and mechanical properties to be used in biomedical application. In this study, antimicrobial agent silver sulfadiazine (SSD) coat/collagen peptide coat-P(3HB-co-4HB) (SCCC) and SSD blend/collagen peptide coat-P(3HB-co-4HB) scaffolds (SBCC) were fabricated using a green salt leaching technique combined with freeze-drying. This was then followed by the incorporation of collagen peptides at various concentrations (2.5-12.5 wt.%) to P(3HB-co-4HB) using collagen-coating. As a result, two types of P(3HB-co-4HB) scaffolds were fabricated, including SCCC and SBCC scaffolds. The increasing concentrations of collagen peptides from 2.5 wt.% to 12.5 wt.% exhibited a decline in their porosity. The wettability and hydrophilicity increased as the concentration of collagen peptides in the scaffolds increased. In terms of the cytotoxic results, MTS assay demonstrated the L929 fibroblast scaffolds adhered well to the fabricated scaffolds. The 10 wt.% collagen peptides coated SCCC and SBCC scaffolds displayed highest cell proliferation rate. The antimicrobial analysis of the fabricated scaffolds exhibited 100% inhibition towards various pathogenic microorganisms. However, the SCCC scaffold exhibited 100% inhibition between 12 and 24 h, but the SBCC scaffolds with SSD impregnated in the scaffold had controlled release of the antimicrobial agent. Thus, this study will elucidate the surface interface-cell interactions of the SSD-P(3HB-co-4HB)-collagen peptide scaffolds and controlled release of SSD, antimicrobial agent.

Multistructured Electrospun Nanofibers for Air Filtration: A Review

Air filtration materials (AFMs) have gradually become a research hotspot on account of the increasing attention paid to the global air quality problem. However, most AFMs cannot balance the contradiction between high filtration efficiency and low pressure drop. Electrospinning nanofibers have a large surface area to volume ratio, an adjustable porous structure, and a simple preparation process that make them an appropriate candidate for filtration materials. Therefore, electrospun nanofibers have attracted increased attention in air filtration applications. In this paper, first, the preparation methods of high-performance electrospun air filtration membranes (EAFMs) and the typical surface structures and filtration principles of electrospun fibers for air filtration are reviewed. Second, the research progress of EAFMs with multistructures, including nanoprotrusion, wrinkled, porous, branched, hollow, core-shell, ribbon, beaded, nets structure, and the application of these nanofibers in air filtration are summarized. Finally, challenges with the fabrication of EAFMs, limitations of their use, and trends for future developments are presented.