Poly(L-lactic acid) scaffold with oriented micro-valley surface and superior properties fabricated by solid-state drawing for blood-contact biomaterials

Electrospun strong, bioactive, and bioabsorbable silk fibroin/poly (L-lactic-acid) nanoyarns for constructing advanced nanotextile tissue scaffolds

Bio-textiles have aroused attractive attentions in tissue engineering and regenerative medicine, and developing robust, bio-absorbable, and extracellular matrix (ECM) fibril-mimicking nanofibrous textiles is urgently required for the renewal of existing microfibrous textile-based scaffolds and grafts. In this study, an integrated electrospinning system consisting of one nanoyarn-forming unit and one hot stretching unit is reported to fabricate silk fibroin (SF)/poly (L-lactic-acid) (PLLA) nanofibrous yarns (nanoyarns). The hot stretching process is demonstrated to significantly improve the fiber alignment, crystallinity, and mechanical properties of SF/PLLA nanoyarns, compared to the unstretched controls. For instance, the fiber alignment degree of hot stretched 50/50 SF/PLLA nanoyarn has increased by 25%, and the failure strength has increased by 246.5%, compared with the corresponding un-stretched control. Increasing the SF/PLLA mass ratio is found to significantly decrease the crystallinity and mechanical properties, but notably increase the degradation rate and surface hydrophilicity of SF/PLLA nanoyarns. Different SF/PLLA nanoyarns are further meticulously interwoven with warp and weft directions to obtain several nanofibrous woven textiles. The results from in vitro cell characterization and in vivo subcutaneous implantation show that increasing the SF/PLLA mass ratio significantly improves the biological properties and effectively reduces the inflammatory response of nanoyarn-constructed textiles. Overall, this study demonstrates that our SF/PLLA nanoyarns with controllable physical, mechanical and biological performances are fantastic candidates for the designing and development of advanced nanoarchitectured textile tissue scaffolds.

Combining electrospinning with hot drawing process to fabricate high performance poly (L-lactic acid) nanofiber yarns for advanced nanostructured bio-textiles

Fiber constructed yarns are the elementary building blocks for the generation of implantable biotextiles, and there are always needs for designing and developing new types of yarns to improve the properties of biotextile implants. In the present study, we aim to develop novel nanofiber yarns (NYs) by combining nanostructure that more closely mimic the extracellular matrix fibrils of native tissues with biodegradability, strong mechanical properties and great textile processibility. A novel electrospinning system which integrates yarn formation with hot drawing process was developed to fabricate poly(L-lactic acid) (PLLA) NYs. Compared to the PLLA NYs without hot drawing, the thermally drawn PLLA NYs presented superbly-orientated fibrous structure and notably enhanced crystallinity. Importantly, they possessed admirable mechanical performances, which matched and even exceeded the commercial PLLA microfiber yarns (MYs). The thermally drawn PLLA NYs were also demonstrated to notably promote the adhesion, alignment, proliferation, and tenogenic differentiation of human adipose derived mesenchymal stem cells (hADMSCs) compared to the PLLA NYs without hot drawing. The thermally drawn PLLA NYs were further processed into various nanofibrous tissue scaffolds with defined structures and adjustable mechanical and biological properties using textile braiding and weaving technologies, demonstrating the feasibility and versatility of thermally drawn PLLA NYs for textile-forming utilization. The hADMSCs cultured on PLLA NY-based textiles presented enhanced attachment and proliferation capacities than those cultured on PLLA MY-based textiles. This work presents a facile technique to manufacture high performance PLLA NYs, which opens up opportunities to generate advanced nanostructured biotextiles for surgical implant applications.

Stereocomplex Polylactide for Drug Delivery and Biomedical Applications: A Review

Polylactide (PLA) is among the most common biodegradable polymers, with applications in various fields, such as renewable and biomedical industries. PLA features poly(D-lactic acid) (PDLA) and poly(L-lactic acid) (PLLA) enantiomers, which form stereocomplex crystals through racemic blending. PLA emerged as a promising material owing to its sustainable, eco-friendly, and fully biodegradable properties. Nevertheless, PLA still has a low applicability for drug delivery as a carrier and scaffold. Stereocomplex PLA (sc-PLA) exhibits substantially improved mechanical and physical strength compared to the homopolymer, overcoming these limitations. Recently, numerous studies have reported the use of sc-PLA as a drug carrier through encapsulation of various drugs, proteins, and secondary molecules by various processes including micelle formation, self-assembly, emulsion, and inkjet printing. However, concerns such as low loading capacity, weak stability of hydrophilic contents, and non-sustainable release behavior remain. This review focuses on various strategies to overcome the current challenges of sc-PLA in drug delivery systems and biomedical applications in three critical fields, namely anti-cancer therapy, tissue engineering, and anti-microbial activity. Furthermore, the excellent potential of sc-PLA as a next-generation polymeric material is discussed.

Studying endothelial cell shedding and orientation using adaptive perfusion-culture in a microfluidic vascular chip

Most tissue-engineered blood vessels are endothelialized by static cultures in vitro. However, it has not been clear whether endothelial cell-shedding and local damage may occur in an endothelial layer formed by static cultures under the effect of blood flow shear postimplantation. In this study, we report a bionic and cost-effective vascular chip platform, and proved that a static culture of endothelialized tissue-engineered blood vessels had the problem of a large number of endothelial cells falling off under the condition imitating the human arterial blood flow, and we addressed this challenge by regulating the flow field in a vascular chip. Electrospun membranes made of highly oriented or randomly distributed poly(ε-caprolactone) fibers were used as the vascular scaffolds, on which endothelial cells proliferated well and eventually formed dense intima layers. We noted that the monolayers gradually adapted to the artery-like microenvironment through the regulation of chip flow field, which also revealed improved cellular orientations. In conclusion, we have proposed a vascular chip with adaptive flow patterns to gradually accommodate the statically cultured vascular endothelia to the shear environment of arterial flow field and enhanced the orientation of the endothelial cells. This strategy may find numerous potential applications such as screening of vascular engineering biomaterials and maturation parameters, studying of vascular biology and pathology, and construction of vessel-on-a-chip models for drug analysis, among others.

[Structural control and characterization of hierarchically structured fibrous scaffolds]

OBJECTIVE

To prepare hierarchically structured fibrous scaffolds with different morphologies, and to explore the additional dimensionality for tuning the physicochemical properties of the scaffolds and the effect of their hemocompatibility and cytocompatibility.

METHODS

Electrospinning poly (e-caprolactone) (PCL)/polyvinylpyrrolidone (PVP) bicomponent fibers (PCL∶PVP mass ratios were 8∶2 and 5∶5 respectively), and the surface porous fibrous scaffolds were prepared by extracting PVP components. The scaffolds were labeled PCL-P8 and PCL-P5 respectively according to the mass ratio of polymer. In addition, shish-kebab (SK) structured scaffolds with different kebab sizes were created by solution incubation method, which use electrospun PCL fibers as shish while PCL chains in solution crystallizes on the fiber surface. The PCL fibrous scaffolds with smooth surface was established as control group. The hierarchically structured fibrous scaffolds were characterized by field emission scanning electron microspore, water contact angle tests, and differential scanning calorimeter (DSC) experiments. The venous blood of New Zealand white rabbits was taken and hemolysis and coagulation tests were used to characterize the blood compatibility of the scaffolds. The proliferation of the pig iliac artery endothelial cell (PIEC) on the scaffolds was detected by cell counting kit 8 (CCK-8) method, and the biocompatibility of the scaffolds was evaluated.

RESULTS

Field emission scanning electron microscopy showed that porous morphology appeared on the surface of PCL/PVP bicomponent fibers after extracting PVP. In addition, SK structure with periodic arrangement was successfully prepared by solution induction, and the longer the crystallization time, the larger the lamellar size and periodic distance. The contact angle and DSC measurements showed that when compared with smooth PCL fiber scaffolds, the crystallinity of PCL surface porous fibrous scaffolds and PCL-SK fibrous scaffolds increased, while the hydrophobicity of PCL-SK fibrous scaffolds increased, but the hydrophobicity of PCL porous scaffolds did not change significantly. The hemolysis test showed that the hemolysis rate of PCL surface porous fibrous scaffolds and PCL-SK fibrous scaffolds was higher than that of PCL fibrous scaffolds. According to American Society of Materials and Tests (ASTM) F756-08 standard, all scaffolds were non-hemolytic materials and were suitable for blood contact materials. Coagulation test showed that the coagulation index of PCL surface porous fibrous scaffolds and PCL-SK fibrous scaffolds was higher than that of PCL fibrous scaffolds at 5 and 10 minutes of culture. CCK-8 assay showed that both hierarchically structured fibrous scaffolds were more conducive to PIEC proliferation than PCL fibrous scaffold.

CONCLUSION

Based on electrospinning technology, solution-induced and blend phase separation methods can be used to construct multi-scale fiber scaffolds with different morphologies, which can not only regulate the surface physicochemical properties of the scaffolds, but also have good blood compatibility and biocompatibility. The hierarchically structured fibrous scaffolds have high application potential in the field of tissue engineering.

Biodegradable vascular stents with high tensile and compressive strength: a novel strategy for applying monofilaments via solid-state drawing and shaped-annealing processes

Monofilaments such as those consisting of polyamide (PA), polydioxanone (PDS), and poly(vinylidene fluoride) (PVDF), have been commonly used in various industries. However, most are non-biodegradable, which is unfavorable for many biomedical applications. Although biodegradable polymers offer significant benefits, they are still limited by their weak mechanical properties, which is an obstacle for use as a biomaterial that requires high strength. To overcome the current limitations of biodegradable monofilaments, a novel solid-state drawing (SSD) process was designed to significantly improve the mechanical properties of both PA and poly(l-lactic acid) (PLLA) monofilaments in this study. Both PA and PLLA monofilaments exhibited more than two-fold increased tensile strength and a highly reduced thickness using SSD. In X-ray diffraction and scanning electron microscopy analyses, it was determined that SSD could not only promote the α-crystal phase, but also smoothen the surface of PLLA monofilaments. To apply SSD-monofilaments with superior properties to cardiovascular stents, a shaped-annealing (SA) process was designed as the follow-up process after SSD. Using this process, three types of vascular stents could be fabricated, composed of SSD-monofilaments: double-helix, single-spring and double-spring shaped stents. The annealing temperature was optimized at 80 °C to minimize the loss of mechanical and physical properties of SSD-monofilaments for secondary processing. All three types of vascular stents were tested according to ISO 25539-2. Consequently, it was confirmed that spring-shaped stents had good recovery rate values and a high compressive modulus. In conclusion, this study showed significantly improved mechanical properties of both tensile and compressive strength simultaneously and extended the potential for biomedical applications of monofilaments.

Current status and future direction of biodegradable metallic and polymeric vascular scaffolds for next-generation stents

Because of the increasing incidence of coronary artery disease, the importance of cardiovascular stents has continuously increased as a treatment of this disease. Biodegradable scaffolds fabricated from polymers and metals have emerged as promising materials for vascular stents because of their biodegradability. Although such stent framework materials have shown good clinical efficacy, it is difficult to decide whether polymers or metals are better vascular scaffolds because their properties are different. Therefore, there are still obstacles in the development of biodegradable vascular scaffolds in terms of improving clinical efficacy. This review analyzes the pros and cons of current stent materials with respect to five key factors for next-generation stent and discusses methods of improvement. Furthermore, we discuss biodegradable electronic stents with electrical conductivity, which has been considered unimportant until now, and highlight electrical conductivity as a key factor in the development of next-generation stents.

In Situ Formation of Microfibrillar Crystalline Superstructure: Achieving High-Performance Polylactide

As a biobased and biodegradable polyester, polylactide (PLA) is widely applied in disposable products, biomedical devices, and textiles. Nevertheless, due to its inherent brittleness and inferior strength, simultaneously reinforcing and toughening of PLA without sacrificing its biodegradability is highly desirable. In this work, a robust assembly consisting of compact and well-ordered microfibrillar crystalline superstructure (FCS) surrounded by slightly oriented amorphism, is achieved by a combined external force field. Unlike the classic crystalline superstructures such as shish-kebabs, cylindrites, and lamellae, the newfound FCS with diameter of about 100 nm and length of several tens of micrometers is aggregated with well-aligned crystalline nanofibers. FCS can serve as discontinuous fiber to self-reinforce the amorphous PLA; more importantly, FCS can also act as rivets to pin the propagating fibrillar crazes leading to the formation of dense fibrillar crazes during stretching, which dissipates much energy and translates the failure of PLA from brittle to ductile. Consequently, PLA with FCS exhibits exceptionally simultaneous enhancement in ductility, strength, and stiffness, outperforming normal PLA with increments of 728, 55, and 70% in elongation at break, strength, and modulus, respectively. Therefore, FSC exhibits competitive advantages in achieving high-performance PLA even for other semicrystalline polymers. More significantly, this newfound crystalline superstructure (FCS) provides a new structural model to establish the correlation between structure and performance.