Importance of endogenous extracellular matrix in biomechanical properties of human skin model

Angiogenesis and full thickness wound repair in a cell sheet-based vascularized skin substitute

Skin tissue engineering is undergoing tremendous expansion as a result from clinical needs, mandatory replacement of animal models and development of new technologies. Many approaches have been used to produce vascularized skin substitutes for grafting purposes showing the presence of capillary-like structures but with limited analysis of their in vitro maturation and plasticity. Such knowledge is however important for the development of tissue substitutes with improved implantation success as well as for validation of vascularization in vitro models, including as a readout in pharmacological analyses. For optimal interactions of cells with microenvironment and vasculature, we here used a cell sheet approach consisting in the sole production of matrix by the cells. In this context, we limited the density of endothelial cells seeded for self-assembly and rather relied on the stimulation of angiogenesis for the development of an extensive connected microvascular-like network. After detailed characterization of this network, we challenged its plasticity both during and after establishment of the skin substitute. We show that fine tuning of VEGF concentration and time of application differentially affects formation of capillary-like structures and their perivascular coverage. Furthermore, we performed a deep wound assay that displayed tissue repair and angiogenesis with unique characteristics of the physiological process. These studies demonstrate the importance of cell-derived microenvironment for the establishment of mature yet dynamic vascularized skin models allowing a wide range of pharmacological and basic investigations. STATEMENT OF SIGNIFICANCE: The significant advancements in organ-on-chips and tissue engineering call for more relevant models including microvascularization with remodeling potential. While vascularized skin substitutes have been developed for years, focus has primarily been on the impact of microvascularization on implantation rather than on its in vitro characterization. We here developed a cell sheet-based vascularized skin substitute relying on angiogenesis, i.e. growth of vessel-like structures within the 3D model, rather than solely on endothelial cell self-assembly. We then characterized :1/ vascularization after modulation of angiogenic factor VEGF during the substitute construction; -2/ angiogenesis associated to tissue repair after deep mechanical wounding. These studies establish a solid physiologically relevant model for further investigation of skin cell interactions and in vitro wound healing.

Fibroblasts transfection by electroporation in 3D reconstructed human dermal tissue

The understanding of the mechanisms involved in DNA electrotransfer in human skin remains modest and limits the clinical development of various biomedical applications, such as DNA vaccination. To elucidate some mechanisms of DNA transfer in the skin following electroporation, we created a model of the dermis using a tissue engineering approach. This model allowed us to study the electrotransfection of fibroblasts in a three-dimensional environment that included multiple layers of fibroblasts as well as the self-secreted collagen matrix. With the aim of improving transfection yield, we applied electrical pulses with electric field lines perpendicular to the reconstructed model tissue. Our results indicate that the fibroblasts of the reconstructed skin tissue can be efficiently permeabilized by applied millisecond electrical pulses. However, despite efficient permeabilization, the transfected cells remain localized only on the surface of the microtissue, to which the plasmid was deposited. Second harmonic generation microscopy revealed the extensive extracellular collagen matrix around the fibroblasts, which might have affected the mobility of the plasmid into deeper layers of the skin tissue model. Our results show that the used skin tissue model reproduces the structural barriers that might be responsible for the limited gene electrotransfer in the skin.

Computational investigation of a 3D-printed skin substitute with orthotropy in mechanical property

As a promising treatment for third-degree burns, grafting with bioengineering skin substitutes shows a capability to overcome the deficiency of donor skin. Similar mechanical properties with human skin are required for employed skin substitutes to avoid secondary damage to patients. Given the representativeness of orthotropy in mechanical properties, there is a need for developing orthotropic skin substitutes. This paper presents computational investigation as well as structural design for the fabrication of orthotropic skin substitutes. A finite element method (FEM) based mechanics simulation model for analyzing the stress field in the skin substitute was developed, by which the stress distribution in mimetic structures of the epidermis and dermis can be acquired. Moreover, the equation of Young's modulus was deduced based on the simulation result, which expressed the mechanical property of designed skin substitutes. Furthermore, several structures of skin substitutes were proposed and their calculated Young's modulus ranged from 21.87 kPa to 213.32 kPa, which was similar to the human skin. Ultimately, uniaxial tensile tests were performed for three types of 3D-printed orthotropic skin substitutes, which validates the feasibility to regulate Young's modulus by regulating the structure of fabricated skin substitutes.

Papillary and reticular fibroblasts generate distinct microenvironments that differentially impact angiogenesis

Papillary and reticular dermis show distinct extracellular matrix (ECM) and vascularization corresponding to their specific functions. These characteristics are associated with gene expression patterns of fibroblasts freshly isolated from their native microenvironment. In order to assess the relevance of these fibroblast subpopulations in a tissue engineering context, we investigated their contribution to matrix production and vascularization using cell sheet culture conditions. We first performed RNA-seq differential expression analysis to determine whether several rounds of cell amplification and high-density culture affected their gene expression profile. Bioinformatics analysis revealed that expression of angiogenesis-related and matrisome gene signatures were maintained, resulting in papillary and reticular ECMs that differ in composition and structure. The impact of secreted or ECM-associated factors was then assessed using two independent 3D angiogenesis assays: -1/ a fibrin hydrogel-based assay allowing investigation of diffusible secreted factors, -2/ a scaffold-free cell-sheet based assay for investigation of fibroblast-produced microenvironment. These analyses revealed that papillary fibroblasts secrete highly angiogenic factors and produce a microenvironment characterised by ECM remodelling capacity and dense and branched microvascular network, whereas reticular fibroblasts produced more structural core components of the ECM associated with less branched and larger vessels. These features mimick the characteristics of both the ECM and the vasculature of dermis subcompartments. In addition to showing that skin fibroblast populations differentially regulate angiogenesis via both secreted and ECM factors, our work emphasizes the importance of papillary and reticular fibroblasts for engineering and modelling dermis microenvironment and vascularization. STATEMENT OF SIGNIFICANCE: Recent advances have brought to the forefront the central role of microenvironment and vascularization in tissue engineering for regenerative medicine and microtissue modelling. We have investigated the role of papillary and reticular fibroblast subpopulations using scaffold-free cell sheet culture. This approach provides differentiated cells conditions allowing the production of their own microenvironment. Analysis of gene expression profiles and characterisation of the matrix produced revealed strong and specific angiogenic properties that we functionally characterized using 3D angiogenesis models targeting the respective role of either secreted or matrix-bound factors. This study demonstrates the importance of cell-generated extracellular matrix and questions the importance of cell source and the relevance of hydrogels for developing physio-pathologically relevant tissue engineered substitutes.

Cold helium plasma jet does not stimulate collagen remodeling in a 3D human dermal substitute

Cold Atmospheric Plasma (CAP) is an emerging physical approach displaying encouraging antitumor and wound healing effects both in vitro and in vivo. In this study, we assessed the potential of direct CAP to remodel skin collagens using an original tissue-engineered human dermal substitute model rich in endogenous extracellular matrix (ECM) covered with 600 µl of culture medium and treated with CAP for 30 and 120 s. Our results indicated that Reactive Oxygen and Nitrogen Species (RONS) such as H2O2, NO3- and NO2- were produced in the medium during treatment. It appeared that in the CAP-treated dermal substitutes 1) cell viability was not altered, 2) pro-collagen I secretion was not modified over 48 h of culture after treatment, 3) global activity of matrix metalloproteinases MMPs was not modulated over 48 h after treatment, and 4) no change in hydroxyproline content was observed over 5 days after treatment. In order to confirm the efficiency of our device, we showed that the plasma-activated culture medium induced cell apoptosis and growth delay using a 3D human tumor spheroid model. In conclusion, no effect of direct CAP treatment was monitored on dermal ECM production and degradation, indicating that CAP does not stimulate collagen remodeling at the tissue scale.

The hypertrophic cartilage induction influences the building-block capacity of human adipose stem/stromal cell spheroids for biofabrication

As an alternative to the classical tissue engineering approach, bottom-up tissue engineering emerges using building blocks in bioassembly technologies. Spheroids can be used as building blocks to reach a highly complex ordered tissue by their fusion (bioassembly), representing the foundation of biofabrication. In this study, we analyzed the biomechanical properties and the fusion capacity of human adipose stem/stromal cell (ASC) we spheroids during an in vitro model of hypertrophic cartilage established by our research group. Hypertrophic induced-ASC spheroids showed a statistically significant higher Young's modulus at weeks 2 (P < .001) and 3 (P < .0005) compared with non-induced. After fusion, non-induced and induced-ASC spheroids increased the contact area and decreased their pairs' total length. At weeks 3 and 5, induced-ASC spheroids did not fuse completely, and the cells migrate preferentially in the fusion contact region. Alizarin red O staining showed the highest intensity of staining in the fused induced-ASC spheroids at week 5, together with intense staining for collagen type I and osteocalcin. Transmission electron microscopy and element content analysis (X-ray Energy Dispersive Spectroscopy) revealed in the fused quartet at week 3 a crystal-like structure. Hypertrophic induction interferes with the intrinsic capacity of spheroids to fuse. The measurements of contact between spheroids during the fusion process, together with the change in viscoelastic profile to the plastic, will impact the establishment of bioassembly protocols using hypertrophic induced-ASC spheroids as building blocks in biofabrication.

Magnetic Silica-Coated Iron Oxide Nanochains as Photothermal Agents, Disrupting the Extracellular Matrix, and Eradicating Cancer Cells

Cancerous cells and the tumor microenvironment are among key elements involved in cancer development, progression, and resistance to treatment. In order to tackle the cells and the extracellular matrix, we herein propose the use of a class of silica-coated iron oxide nanochains, which have superior magnetic responsiveness and can act as efficient photothermal agents. When internalized by different cancer cell lines and normal (non-cancerous) cells, the nanochains are not toxic, as assessed on 2D and 3D cell culture models. Yet, upon irradiation with near infrared light, the nanochains become efficient cytotoxic photothermal agents. Besides, not only do they generate hyperthermia, which effectively eradicates tumor cells in vitro, but they also locally melt the collagen matrix, as we evidence in real-time, using engineered cell sheets with self-secreted extracellular matrix. By simultaneously acting as physical (magnetic and photothermal) effectors and chemical delivery systems, the nanochain-based platforms offer original multimodal possibilities for prospective cancer treatment, affecting both the cells and the extracellular matrix.

Characterization of the physical properties of tumor-derived spheroids reveals critical insights for pre-clinical studies

Three-dimensional spheroids are widely used as cancer models to study tumor cell proliferation and to evaluate new anticancer drugs. Growth-induced stress (i.e., stress that persists in tumors after external loads removal) influences tumor growth and resistance to treatment. However, it is not clear whether spheroids recapitulate the tumor physical properties. Here, we demonstrated experimentally and with the support of mathematical models that, like tumors, spheroids accumulate growth-induced stress. Moreover, we found that this stress is lower in spheroids made of 5,000 cancer cells and grown for 2 days than in spheroids made of 500 cancer cells and grown for 6 days. These two culture conditions associated with different growth-induced stress levels also had different effects on the spheroid shape (using light sheet microscopy) and surface topography and stiffness (using scanning electron microscopy and atomic force microscopy). Finally, the response to irinotecan was different in the two spheroid types. Taken together, our findings bring new insights into the relationship between the spheroid physical properties and their resistance to antitumor treatment that should be taken into account by the experimenters when assessing new therapeutic agents using in vitro 3D models or when comparing studies from different laboratories.

High power electromagnetic pulse applicators for evaluation of biological effects induced by electromagnetic radiation waves

Micro applicators for real-time observation of electromagnetic radiation waves effects on giant unilamellar vesicles and mammalian cells.

The role of the microenvironment in the biophysics of cancer

During the last decades, cell mechanics has been recognized as a quantitative measure to discriminate between many physiological and pathological states of single cells. In the field of biophysics of cancer, a large body of research has been focused on the comparison between normal and cancer mechanics and slowly the hypothesis that cancer cells are softer than their normal counterparts has been accepted, even though in situ tumor tissue is usually stiffer than the surrounding normal tissue. This corroborates the idea that the extra-cellular matrix (ECM) has a critical role in regulating tumor cell properties and behavior. Rearrangements in ECM can lead to changes in cancer cell mechanics and in specific conditions the general assumption about cancer cell softening could be confuted. Here, we highlight the contribution of ECM in cancer cell mechanics and argue that the statement that cancer cells are softer than normal cells should be firmly related to the properties of cell environment and the specific stage of cancer cell progression. In particular, we will discuss that when employing cell mechanics in cancer diagnosis and discrimination, the chemical, the topographical and - last but not least - the mechanical properties of the microenvironment are very important.