Size effect on dose output in phantoms of x-ray tubes in medical x-ray imaging

Body size and tube voltage dependent corrections for Hounsfield Unit in medical X-ray computed tomography: theory and experiments

The purpose of this work is to present a body size and tube voltage dependent correction scheme for the Hounsfield Unit, HU, in medical X-ray Computed Tomography imaging. Boltzmann photon transport equation was employed to study X-ray interaction with bulk water in CT imaging. Experimentally measured X-ray output in body of phantoms and attenuation cross sections of water were employed in the derivation of beam intensity in X-ray imaging. A Somatom Emotion CT scanner from Siemens and electron density phantoms from CIRS were employed to acquire CT images of different body sizes and different tissue materials located at different depths from body’s surface. Tube voltage and depth dependent effective attenuation of bulk water was found from theoretical analysis in agreement with measured size-specific correction factors for CTDI_vol under different tube voltages. A size and tube voltage dependent correction scheme for the Hounsfield Unit is established. For the same tissue material, body size has much larger impact on the CT number variations than that of depth from the body surface in phantom measurements. Good results were achieved by applying the established correction scheme on the experimentally measured CT number variations under different tube voltages and body sizes.

Body size and tube voltage-dependent guiding equations for optimal selection of image acquisition parameters in clinical X-ray imaging

The purpose of this work was to present body size and tube voltage-dependent equations for optimal selection of image acquisition parameters in guiding clinical X-ray imaging. The dose output of X-ray tubes was expressed as a function of the image acquisition parameters of tube voltage (kVp), tube current-exposure time product (mAs), and body size (d). Dose power (n) to kVp was determined to be a linear function of body size in an earlier phantom study. Tube voltage-dependent attenuation coefficients of water were used to determine the kVp effect on the depth dose of X-rays from the body's entrance surface. The new expression for the dose output of X-ray tubes in patients was then employed for image quality and radiation dose optimization, assuming that image quality is a logistic function of the radiation dose to patients. For constant kVp, the percentage of mAs increase for a 1-cm increase in body size d is dependent on the kVp applied. For constant mAs, the percentage of kVp increase for a 1-cm increase in body size is dependent on both body size d and the kVp applied. For constant body size, the percentage of kVp increase should be a fraction of the percentage of decrease in the mAs, where the fraction is dependent on the body size. The improved body size and tube voltage-dependent governing equations for variations in X-ray imaging parameters should be more accurate in guiding optimal selection of the kVp and mAs image acquisition parameters in medical X-ray imaging.