Measurement of strain in the rod for lumbar pedicle screw fixation: An experimental and finite element study

Biomechanical analysis of cervical spine (C2-C7) at different flexed postures

Musculoskeletal diseases are often related with postural changes in the neck region that can be caused by prolonged cervical flexion. This is one of the contributing factors. When determining the prevalence, causes, and related risks of neck discomfort, having a solid understanding of the biomechanics of the cervical spine (C1-C7) is absolutely necessary. The objective of this study is to make predictions regarding the intervertebral disc (IVD) stress values across C2-C7 IVD, the ligament stress, and the variation at 0°, 15°, 30°, 45°, and 60° of cervical neck angle using finite element analysis (FEA). In order to evaluate the mechanical properties of the cervical spine (particularly, C2-C7), this investigation makes use of computed tomography (CT) scans to develop a three-dimensional FEA model of the cervical spine. A preload of 50 N compression force was applied at the apex of the C2 vertebra, and all degrees of freedom below the C7 level were constrained. The primary objective of this investigation is to assess the distribution of von Mises stress within the IVDs and ligaments spanning C2-C7 at various flexion angles: 0°, 15°, 30°, 45°, and 60°, utilizing FEA. The outcomes derived from this analysis were subsequently compared to previously published experimental and FEA data to validate the model's ability to replicate the physiological motion of the cervical spine across different flexion angles.

Design and development of a patient-specific temporomandibular joint implant: Probing the influence of bone condition on biomechanical response

Total temporomandibular joint (TMJ) replacement is widely recognized as an effective treatment for TMJ disorders. The long-term stability of TMJ implants depends on two important factors which are design concepts for fixation to anatomical locations in the mandible and bone conditions. Other factors include stress distribution, microstrain in the peri-implant, bone attributes like bone conditions leading to the clinical complications and failures. This study addresses these limitations by examining the influence of patient-specific design concepts and bone conditions on TMJ implant performance. Clinical evidences support the importance of implant design on healing ability. Previous studies have focused on achieving precise implant fit based on geometric considerations, however those published studies did not explore the impact of such. Against this perspective, the present study reports the extensive finite element analysis (FEA) results, while analyzing the impact of a newly designed patient-specific TMJ implant to address clinical complications associated with various bone conditions, particularly osteoporotic bone. In validating the FEA results, the performance of additively manufactured patient-specific TMJ implants was compared with designs resembling two commonly used clinically approved implant designs. By addressing the limitations of previous research and emphasizing the importance of bone conditions, the study provides valuable guidelines for the development of next-generation TMJ implants. These findings contribute to enhanced clinical outcomes and long-term success in the treatment of TMJ disorders.

The role of counter-torque holders in tightening of pedicle screw-rod constructs: a biomechanical study in a porcine model

BACKGROUND CONTEXT

Pedicle screw-rod assembly procedures following pedicle screw insertion include contouring and placing rods into screw tulips, introducing set screws into the tulip along the screw thread, applying a counter-torque holder and tightening all the set screws clockwise. Even if an appropriate pedicle screw is implanted, screw dislodgement after tightening of the tulip and set screw is not uncommon. Pedicle wall violation resulting from excessive rotational force due to inadequate use of a counter-torque holder might be the reason. However, the strain change in the pedicle during tulip-set screw tightening and the role of counter-torque have never been investigated.

PURPOSE

This study determined differences in the strain change in the outer and inner pedicle walls during tulip-set screw tightening; additionally, the influence of counter-torque on pedicle wall violation was elucidated.

STUDY DESIGN

A controlled biomechanical study; the strain values of outer and inner pedicle walls in cadaveric porcine L4-L5 vertebrae during tulip-set screw tightening with or without a counter-torque holder were measured.

METHODS

Twelve L4-L5 fresh-frozen porcine lumbar vertebrae were implanted with screw-rod constructs; the set screw was randomly locked into the tulip in the right L5, right L4, left L5 and left L4 testing groups. The maximal values from eight strain gauges (P-R-O: outer cortex of right pedicle in proximal vertebra; P-R-I: inner cortex of right pedicle in proximal vertebra; D-R-O: outer cortex of right pedicle in distal vertebra; D-R-I: inner cortex of right pedicle in distal vertebra; P-L-O: outer cortex of left pedicle in proximal vertebra; P-L-I: inner cortex of left pedicle in proximal vertebra; D-L-O: outer cortex of left pedicle in distal vertebra; D-L-I: outer cortex of left pedicle in proximal vertebra) for each specimen during tightening to 12 Nm were measured.

RESULTS

The maximal strain values of the ipsilateral strain gauges in all testing groups were almost significantly higher when a counter-torque holder was not used than when one was used. The strain values in the adjacent pedicle of specimens without a counter-torque holder were significantly increased: P-R-O and P-R-I in the right L5 group; D-R-I in the right L4 group; P-L-I and P-L-O in the left L5 group; D-L-O and D-L-I in the left L4 group.

CONCLUSIONS

The constraint effect of counter-torque during tulip-set screw tightening is necessary. Clockwise rotational force with a fragile lateral pedicle wall suggests that caution is required when using a counter-torque holder to tighten the right L5 and left L4 constructs.

CLINICAL SIGNIFICANCE

A counter-torque holder is important during tulip-set screw tightening; improper use may lead to adjacent pedicle wall violation, sequentially resulting in pedicle screw loosening.