Dose-area product ratio in external small-beam radiotherapy: beam shape, size and energy dependencies in clinical photon beams

Use of dose-area product to assess plan quality in robotic radiosurgery

PURPOSE

In robotic stereotactic radiosurgery (SRS), optimal selection of collimators from a set of fixed cones must be determined manually by trial and error. A unique and uniformly scaled metric to characterize plan quality could help identify Pareto-efficient treatment plans.

METHODS

The concept of dose-area product (DAP) was used to define a measure (DAPratio) of the targeting efficiency of a set of beams by relating the integral DAP of the beams to the mean dose achieved in the target volume. In a retrospective study of five clinical cases of brain metastases with representative target volumes (range: 0.5-5.68 ml) and 121 treatment plans with all possible collimator choices, the DAPratio was determined along with other plan metrics (conformity index CI, gradient index R50%, treatment time, total number of monitor units TotalMU, radiotoxicity index f12, and energy efficiency index η50%), and the respective Spearman's rank correlation coefficients were calculated. The ability of DAPratio to determine Pareto efficiency for collimator selection at DAPratio < 1 and DAPratio < 0.9 was tested using scatter plots.

RESULTS

The DAPratio for all plans was on average 0.95 ± 0.13 (range: 0.61-1.31). Only the variance of the DAPratio was strongly dependent on the number of collimators. For each target, there was a strong or very strong correlation of DAPratio with all other metrics of plan quality. Only for R50% and η50% was there a moderate correlation with DAPratio for the plans of all targets combined, as R50% and η50% strongly depended on target size. Optimal treatment plans with CI, R50%, f12, and η50% close to 1 were clearly associated with DAPratio < 1, and plans with DAPratio < 0.9 were even superior, but at the cost of longer treatment times and higher total monitor units.

CONCLUSIONS

The newly defined DAPratio has been demonstrated to be a metric that characterizes the target efficiency of a set of beams in robotic SRS in one single and uniformly scaled number. A DAPratio < 1 indicates Pareto efficiency. The trade-off between plan quality on the one hand and short treatment time or low total monitor units on the other hand is also represented by DAPratio.

Uniformity calibration for large area XY strip parallel plate ionization chamber

Demand for large area parallel plate ionization chamber (PPIC) or large area ionization chamber (LAIC) has risen in recent years due to several advantages of the large effective area in monitoring therapeutic radiation beams. PPICs are designed for the measurements of beam profile and dosimetry in radiation therapy quality assurance (QA) procedures.Objective. Heterogeneous responses over the large sensitive area pose an undeniable concern for the straightforward applications of PPICs in clinical dosimetry. Uniformity calibration for the detector response is thus essential for the accurate performance of each PPIC unit.Approach.A large area XY strip PPIC, characterized by a large effective area of 345.44 × 345.44 mm²and 256 readout channels, was investigated in this study. A new systematic uniformity calibration is developed to improve the lateral response of the PPIC over the measurements for both narrow beams and large square field beams. A 2D response map of the PPIC was obtained by a spot-scanning method using a compact x-ray tube (mini x-ray). The mini x-ray, providing stable radiation (uncertainty <0.1%), was moved with a step size of 20 mm in 2 dimensions across the entire PPIC surface to collect a complete spot scan. Different uniformity calibration methods were introduced for the measurement of the PPIC by adopting the information from the detector 2D response map.Main results.Deviation of the detector response, before calibration, was observed to reach about 7% for the testing PPIC unit which is much higher than the recommended uniformity response of 1% (IAEA TRS-398). The uniformity response of the PPIC improved significantly to less than 1% across the detector surface after calibration.Significance.The proposed methods enable the practical application of PPIC in routine clinical dosimetry and can be reliably adopted by any radiation facility to perform daily and monthly QA.

Dose area product primary standards established by graphite calorimetry at the LNE-LNHB for small radiation fields in radiotherapy

PURPOSE

To present primary standards establishment in terms of Dose Area Product (DAP) for small field sizes.

METHODS

A large section graphite calorimeter and two plane-parallel ionization chambers were designed and built in-house. These chambers were calibrated in a 6MV FFF beam at the maximum dose rate of 1400 UM/min for fields defined by specifically designed circular collimators of 5, 7.5, 10, 13 and 15 mm diameter and jaws of 5, 7, 10, 13 and 15 mm side length on a Varian TrueBeam linac.

RESULTS

The two chambers show the same behaviour regardless of field shape and size. From 5 to 15 mm, calibration coefficients slightly increase with the field size with a magnitude of 1.8% and 1.1% respectively for the two chambers, and are independent of the field shape. This tendency was confirmed by Monte Carlo calculations. The average associated uncertainty of the calibration coefficients is around 0.6% at k=1.

CONCLUSIONS

For the first time, primary standards in terms of DAP were established by graphite calorimetry for an extended range of small field sizes. These promising results open the door for an alternative approach in small fields dosimetry.