Nanoscale heterojunctions of rGO-MoS2 composites for nitrogen dioxide sensing at room temperature

Synthesis, Modulation, and Application of Two-Dimensional TMD Heterostructures

Two-dimensional (2D) transition metal dichalcogenide (TMD) heterostructures have attracted a lot of attention due to their rich material diversity and stack geometry, precise controllability of structure and properties, and potential practical applications. These heterostructures not only overcome the inherent limitations of individual materials but also enable the realization of new properties through appropriate combinations, establishing a platform to explore new physical and chemical properties at micro-nano-pico scales. In this review, we systematically summarize the latest research progress in the synthesis, modulation, and application of 2D TMD heterostructures. We first introduce the latest techniques for fabricating 2D TMD heterostructures, examining the rationale, mechanisms, advantages, and disadvantages of each strategy. Furthermore, we emphasize the importance of characteristic modulation in 2D TMD heterostructures and discuss some approaches to achieve novel functionalities. Then, we summarize the representative applications of 2D TMD heterostructures. Finally, we highlight the challenges and future perspectives in the synthesis and device fabrication of 2D TMD heterostructures and provide some feasible solutions.

Humidity activated ultra-selective room temperature gas sensor based on W doped MoS2/RGO composites for trace level ammonia detection

The lack of highly efficient, cost effective and stable ammonia gas sensors functionable at room temperature even in extreme humid environments poses significant challenge for the future generation gas sensors. The prime factors that impede the development of such next generation gas sensors are the strong interference of humidity and sluggish selectivity. Herein, we fabricated tungsten doped molybdenum disulphide/reduced graphene oxide composite by an in-situ hydrothermal method to exploit the adsorption, dissolution (solubility), ionization and transmission process of ammonia and thereby to effectuate its trace level detection even in indispensable humid environments. The protype based on 5 at.% Tungsten doped MoS2/RGO (W5) gas sensor exhibited 3.8-fold increment in its response to 50 ppm of ammonia when the relative humidity varied from 20 % to 70 % with ultra-high selectivity at room temperature. The as prepared gas sensor revealed a practical detection limit down to 1 ppm with a substantial response and rapid recovery time. Furthermore, W5 gas sensor exhibited a 42-fold increment in response to 50 ppm of ammonia relative to its pristine (MoS2/RGO) MG composite with a RH of 70 %. The proton hopping mechanism accountable for such an enormous enhancement in ammonia sensing and its potential for breath sensor are briefly annotated.

Ag decoration-enabled sensitization enhancement of black phosphorus nanosheets for trace NO2 detection at room temperature

Black phosphorus (BP), one rising star of two-dimensional (2D) materials, has showcased a huge capability for ppb-level NO₂ detection. However, sluggish reaction kinetics and fragile stability frustrate its further application. In this regard, for the first time we prepared Ag nanoparticles modified BP nanosheets as the sensing layer via one feasible method to recognize trace NO₂ at room temperature. With respect to individual BP, the composition-optimized BP-Ag nanocomposites (BP-Ag-1 sensor) achieved a favorable performance primarily in terms of boosted response (39.9% vs. 11.8%, 100 ppb NO₂), accelerated response speed (190 s vs. 486 s, 100 ppb NO₂) and strengthened operation stability, together with ultralow theoretical detection limit of 0.25 ppb. Furthermore, a protection layer comprised of polylactic acid (PLA) was anchored onto the surface of BP-Ag-1 sensor to keep the water molecules physically from the sensing layer and retain a distinguishable signal toward trace NO₂ at high moisture environments. The introduction of Ag and PLA separately reduced the lone electron pairs from P atoms and suppressed the water penetration into the BP film, thereby offering an alternative way to passivate BP for its optoelectronic applications in the future.

An electrochemical molecularly imprinted sensor based on CuBi2O4/rGO@MoS2 nanocomposite and its utilization for highly selective and sensitive for linagliptin assay

The molecularly imprinted polymers (MIP) is an outstanding electrochemical tool that demonstrates good chemical sensitivity and stability. These main advantages, coupled with the material's vast microfabrication flexibility, make molecularly imprinted sensors an attractive sensing device. Herein, it was aimed to develop a state-of-art molecularly imprinted sensor based on CuBi₂O₄/rGO@MoS₂ nanocomposite to be utilized for the detection of linagliptin (LNG), a novel hypoglycemic drug. The electrochemical characterizations of linagliptin on the surface of the modified electrode was examined via cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). Several characterization methods including transmission electron microscope (TEM), X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), and Energy-dispersive X-ray spectroscopy(EDX), were utilized for electrode characterization. The LNG imprinted voltammetric sensor was developed in 80.0 mM phenol containing 20.0 mM LNG. CuBi₂O₄/rGO@MoS₂ nanocomposite on LNG imprinted screen-printed carbon electrode (SPCE) (MIP/CuBi₂O₄/rGO@MoS₂ nanocomposite/SCPE) exhibited a linear relationship between peak current and LNG concentration in the range 0.07-0.5 nM with a detection limit of 0.057 nM. In the existence of interfering substances, an LNG imprinted electrode was utilized to analyze urine, human plasma, and tablet samples with adequate selectivity. The developed sensor was also illustrated for stability, repeatability, reproducibility, and reusability.

A highly efficient rGO grafted MoS2 nanocomposite for dye adsorption and electrochemical detection of hydroquinone in wastewater

Scheme depicting the synthesis and the fabrication of rGO–MoS2 nanocomposite-based enzymatic biosensor for estimation of hydroquinone.

Hollow Cu2O nanospheres loaded with MoS2/reduced graphene oxide nanosheets for ppb-level NO2 detection at room temperature

Low energy consumption, high sensing response and high selectivity are the important indexes of metal oxide semiconductor (MOS) gas sensors applied in many application fields. However, the high working temperature and poor selectivity of MOS sensors severely restrict their scope of application in the Internet of Things (IoT). Herein, ternary MoS₂-rGO-Cu₂O (MG-Cu) composites with boosting ppb-level NO₂ sensing characteristics are synthesized by combining hydrothermal method and soft-template method. The optimal proportion of MoS₂, rGO and Cu₂O is systematically explored. The SEM and TEM analyses confirm the hollow Cu₂O is anchored on the surface of MG. The gas sensing tests illustrate that optimum composite sensor exhibits highest response to 500 ppb NO₂ at room temperature, which is 11 and 5 times higher compared to pure MoS₂ and binary MG15, respectively. Besides, it displays excellent selectivity and superior stability. The synergy of shell-structure with abundant mesoporous, heterojunction construction and enhanced conductivity lead to the enhanced sensing performance of ternary sensor.

All-Electrical High-Sensitivity, Low-Power Dual-Mode Gas Sensing and Recovery with a WSe2/MoS2 pn Heterodiode

Two-dimensional MoS₂ gas sensors have conventionally relied on a change in field-effect-transistor (FET) channel resistance or in the Schottky contact/pn homojunction barrier. We demonstrate an enhancement in sensitivity (6×) and dynamic response along with a reduction in detection limit (8×) and power (10⁴×) in a gate-tunable type-II WSe₂(p)/MoS₂(n) heterodiode gas sensor over an MoS₂ FET on the same flake. Measurements for varying NO₂ concentration, gate bias, and MoS₂ flake thickness, reinforced with first-principles calculations, indicate dual-mode operation due to (i) a series resistance-based exponential change in the high-bias thermionic current (high sensitivity), and (ii) a heterointerface carrier concentration-based linear change in near-zero-bias interlayer recombination current (low power) resulting in sub-100 μW/cm² power consumption. Fast and gate-bias tunable recovery enables an all-electrical, room-temperature dynamic operation. Coupled with the sensing of trinitrotoluene (TNT) molecules down to 80 ppb, this study highlights the potential of the WSe₂/MoS₂ pn heterojunction as a simple, low-overhead, and versatile chemical-sensing platform.

Welcome to Nano Express

Science at the nanoscale is multidisciplinary and intersects communities extending across physics, materials science, engineering, chemistry, biology, medicine and environmental science as well as industry. Nano Express reflects this situation as a cross-disciplinary open access journal that builds upon IOP Publishing’s long-standing reputation of serving the whole nanoscience community.