Effects of erbium, chromium:YSGG laser irradiation on root surface: morphological and atomic analytical studies

Comparative evaluation of microleakage after root-end resection by erbium, chromium: Yttrium-scandium-gallium-garnet (Er, Cr:YSGG) laser and carbide bur with or without placement of mineral trioxide aggregate: An in vitro study

Background:

Root-end resection followed by retrofilling is one of the prime requisites to avoid apical microleakage.

Aim:

It comparatively evaluated the microleakage after root-end resection by erbium, chromium:yttrium, scandium, gallium, and garnet laser and carbide bur with or without placement of mineral trioxide aggregate (MTA).

Materials and Methods:

In this study, 60 maxillary central incisors were decoronated and biomechanically prepared. Out of 60 samples, 48 were included in the experimental group while the rest 12 were in the control group. The samples in the experimental group were obturated, whereas the samples in the control group were not obturated. The experimental group samples were divided into two: one group resected with the laser and the other half resected with carbide bur. These groups were further subdivided into two – one group retrofilled with MTA and the other half without MTA. The control group had both laser- and carbide bur-resected samples with positive and negative controls. All the samples were dyed, decalcified, and cleared. Digital photograph of each sample was taken, and the area of dye penetration was measured with the help of ImageJ software.

Statistical Analysis:

Analysis of variance and Tukey's test were done.

Results:

The highest microleakage was seen in carbide without MTA and the least was seen with laser with MTA.

Conclusion:

Laser-resected MTA-retrofilled samples showed minimum leakage.

Evaluation of Antimicrobial Efficacy and Penetration Depth of Various Irrigants into the Dentinal Tubules with and without Lasers: A Stereomicroscopic Study

Aim

To evaluate and compare the antibacterial efficacy and horizontal depth of penetration of various irrigants into the dentinal tubules when used alone and when combined with lasers.

Materials and methods

An experimental study was done on 42 single-rooted teeth. Access cavity preparation was done and the canals were enlarged up to a ProTaper file size F2 of length 25 mm. They were inoculated with 0.1 mL of Enterococcus faecalis and the samples were randomly assigned into six different groups of seven teeth each. The following irrigation systems were used individually and in combinations—normal saline, sodium hypochlorite, chlorhexidine gluconate, diode laser and erbium, chromium: ytrrium scandium gallium garnet laser (Er,Cr:YSGG laser). The colony-forming units (CFU) of bacteria before and after disinfection and the penetration depth of different groups were determined. Statistical analysis was done by an ANOVA test.

Results

The highest number of CFU of bacteria was shown by the group where saline was used and it also showed the least penetration depth compared to that of the Er,Cr:YSGG laser group.

Conclusion

Er,Cr:YSGG laser when used along with sodium hypochlorite and chlorhexidine gluconate showed the highest reduction in the CFU of bacteria and the greatest penetration depth when observed under a stereomicroscope.

Clinical significance

Laser-assisted irrigation regimes have a high antibacterial efficacy and more penetration depth into the dentinal tubules.

How to cite this article

Subramani SM, Anjana G, et al. Evaluation of Antimicrobial Efficacy and Penetration Depth of Various Irrigants into the Dentinal Tubules with and without Lasers: A Stereomicroscopic Study. Int J Clin Pediatr Dent 2019;12(4):273–279.

Comparative study of debris and smear layer removal with EDTA and Er,Cr:YSGG laser

Background

To evaluate in vitro, the ability in removing debris and Smear Layer of 17% EDTA and Er,Cr:YSGG laser.

Material and Methods

58 unirradicular teeth were instrumented with MTwo® and divided into 3 groups according to irrigation protocol: 17%EDTA, laser and a combination of 17%EDTA and laser. All samples were analyzed in the apical and middle third with Scanning Electron Microscope. The Chi-cuadrado and McNemar tests were used to determine the statistical analysis and data processing and analysis was performed with the statistical package StatGraphics Centurion XVI.

Results

Debris analysis showed statistical significant differences when compared EDTA vs laser and EDTA vs EDTA+laser in the middle third. The Smear Layer removal showed statistical significant differences in the middle third when compared EDTA vs laser and EDTA vs EDTA+laser.

Conclusions

Laser showed a greater cleaning capacity than EDTA in the middle third; the cleanliness was even better when combined laser with EDTA, so the effect is accumulative.

Key words:Root canal treatment, Smear Layer, Er,Cr:YSGG laser, debridement.

Minimally Invasive Treatment of Infrabony Periodontal Defects Using Dual-Wavelength Laser Therapy

Introduction. Surgical management of infrabony defects is an invasive procedure, frequently requiring the use of adjunctive material such as grafts or biologics, which is time-consuming and associated with expense and morbidity to the patient. Lasers in periodontal regeneration have been reported in the literature, with each wavelength having potential benefits through different laser-tissue interactions. The purpose of this case series was to assess the efficacy of a new dual-wavelength protocol in the management of infrabony defects. Materials and Methods. 32 defects (one in each patient) were treated using ultrasonic debridement, followed by flapless application of Erbium, Chromium:Yttrium, Scandium, Gallium, Garnet (Er,Cr:YSGG) laser (wavelength 2780 nm), and final application of diode laser (wavelength 940 nm). Pocket depths (PD) were measured after 6 months and repeat radiographs taken after one year. Results. The mean baseline PD was 8.8 mm (range 6–15 mm) and 6 months later was 2.4 mm (range 2–4 mm), with mean PD reduction being 6.4 ± 1.7 mm (range 3–12 mm). There was a significant gain in relative linear bone height (apical extent of bone), with mean percentage bone fill of 39.7 ± 41.2% and 53% of sites showing at least 40% infill of bone. Conclusion. The results compare favourably with traditional surgery and require further validation through randomised clinical controlled trials.

The Adjunctive Use of the Erbium, Chromium: Yttrium Scandium Gallium Garnet Laser in Closed Flap Periodontal Therapy. A Retrospective Cohort Study

Objectives:

The current periodontal literature has been inconsistent in finding an added advantage to using lasers in periodontal therapy. The aim of this study was to compare treatment outcomes following root surface instrumentation alone (NL group), or with adjunctive use of Erbium, Chromium: Yttrium Scandium Gallium Garnet (Er,Cr:YSGG) laser (L group).

Material and Methods:

Patients diagnosed with generalized chronic periodontitis, having a minimum of 1 year follow up were selected by a blinded party for inclusion in a retrospective analysis from patients treated prior to and after integration of laser in a single clinic setting. Probing depths (PD) of all sites ≥5 mm and full mouth bleeding scores were analyzed. Further analysis was carried out on the treatment outcomes of only the molar teeth and of pockets >6mm.

Results:

53 patients were included (25 NL,28 L). There was no significant difference between baseline PDs (NL=6.19mm, L=6.27mm, range 5-11mm). The mean PD after one year was 2.83mm (NL) 2.45mm (L), with the mean PD reductions being 3.35mm (NL) and 3.82mm (L) (p<0.002). The mean PD reduction for the molars were 3.32mm (NL) and 3.86mm (L) (p< 0.007), and for ≥7mm group were 4.75mm (NL) compared to 5.14mm (L) (p< 0.009). There was significantly less bleeding on probing in the laser group after one year (p<0.001)

Conclusion:

Both treatment modalities were effective in treating chronic periodontitis, but the added use of laser may have advantages, particularly in molar tooth sites and deeper pockets. Further research with RCTs is needed to test this hypothesis further.

Effect of Er,Cr:YSGG laser irradiation with radial firing tips on Candida albicans in experimentally infected root canals

Aim. To compare the disinfection effect of Er,Cr:YSGG laser using radial firing tips with NaOCI in root canals infected with C. albicans and to evaluate the irradiation effect on the dentinal surfaces. Material and Methods. In total seventy-six mandibular premolar teeth were used. In order to standardize the incubation and sterilization procedure, eight teeth were used. Sixty-eight of the root canals were incubated with C. albicans suspension for 72 hours. The specimens were divided into 5 experimental groups. Two groups were constituted as Group 1 was irradiated with 1.5 W laser (n = 8) and group 2, which was irradiated with 2 W laser (n = 8). Two more groups were formed as Group 3 (2 W laser (n = 25) and Group 4 NaOCI (5%) (n = 25). Group 5 (n = 2) did not receive any treatment. Mann-Whitney U and Kruskal-Wallis H tests were used to compare the different laser output powers. Wilcoxon Signed Ranks Test was used in order to compare the Candida cfu/ml levels according to treatment protocols (P < 0.05). Results. Both 1.5 W and 2 W laser resulted in a major reduction of C. albicans without a significant difference. The comparison of the dentin surfaces irradiated with Er,Cr:YSGG laser at two power settings resulted in similar morphological changes. However, NaOCI was found to be more effective in reduction of C. albicans than 2 W laser application. Conclusion. According to the results of the present study, the Er,Cr:YSGG laser with radial firing tips presented less antifungal effects on C. albicans in root canals of infected teeth than NaOCl solution.

Evaluation of microleakage of root canal fillings irradiated with different output powers of erbium, chromium:yttrium-scandium-gallium-garnet laser

This study evaluated the root canal seal achieved by irradiation with an erbium, chromium:yttrium-scandium-gallium-garnet laser, and the optimal output power to remove debris and the smear layer were determined. One hundred mandibular premolar teeth were prepared and divided into four groups. Group 1 was not lased but was irrigated with 5 mL of 5.25% NaOCl and 5 mL of 17% ethylenediaminetetraacetic acid. Group 2 was irradiated at a panel setting of 1 W, group 3 at 2 W and group 4 at 2.5 W, with a 50% water level and 48% air-cooling level. Root canals were obturated by cold lateral compaction, and apical microleakage was measured using a fluid filtration model. The remaining debris and smear layer were evaluated via scanning electron microscopy. Statistically significant differences were detected between groups. Irradiation at 1 and 2 W using an erbium, chromium:yttrium-scandium-gallium-garnet laser produced a seal superior to that of the other treatments.

Push-out bond strength of two root-end filling materials in root-end cavities prepared by Er,Cr:YSGG laser or ultrasonic technique

This study compared the push-out bond strength of mineral trioxide aggregate (MTA) and a new endodontic cement (NEC) as root-end filling materials in root-end cavities prepared by ultrasonic technique (US) or Er,Cr:YSGG laser (L). Eighty single-rooted extracted human teeth were endodontically treated, apicectomised and randomly divided into four following groups (n = 20): US/MTA, US/NEC, L/MTA and L/NEC. In US/MTA and US/NEC groups, root-end cavities were prepared with ultrasonic retrotip and filled with MTA and NEC, respectively. In L/MTA and L/NEC groups, root-end cavities were prepared using Er,Cr:YSGG laser and filled with MTA and NEC, respectively. Each root was cut apically to create a 2 mm-thick root slice for measurement of bond strength using a universal testing machine. Then, all slices were examined to determine the mode of bond failure. Data were analysed using two-way anova. Root-end filling materials showed significantly higher bond strength in root-end cavities prepared using ultrasonic technique (US/MTA and US/NEC) (P < 0.001). The bond strengths of MTA and NEC did not differ significantly. The failure modes were mainly adhesive for MTA, but cohesive for NEC. In conclusion, bond strengths of MTA and NEC to root-end cavities were comparable and higher in ultrasonically prepared cavities.

Comparison of Er,Cr:YSGG laser and hand instrumentation on the attachment of periodontal ligament fibroblasts to periodontally diseased root surfaces: an in vitro study

BACKGROUND

This study investigates the effects of erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser irradiation and hand instrumentation on the attachment of periodontal ligament (PDL) fibroblasts to periodontally involved root surfaces.

METHODS

Twenty-four single-rooted periodontally involved human teeth (test groups), and six healthy premolar teeth extracted for orthodontic reasons (control group) were included in this study. A total of 45 root slices were obtained from all selected teeth and assigned to the following five groups: 1) untreated healthy group (+control); 2) untreated periodontally diseased group (-control); 3) hand instrumentation group (scaled Gracey); 4) laser I, Er,Cr:YSGG laser irradiation setting-I (short pulse); and 5) laser II, Er,Cr:YSGG laser irradiation setting-II (long pulse). All of the root slices were autoclaved in phosphate buffered saline and slices were placed onto cell culture inserts. PDL fibroblasts were placed at the density of 80,000 cells on the root plate (5 x 6 mm) and incubated for 48 hours and transferred to 24-well plates. The attachment PDL fibroblasts on the root plates were observed using confocal microscopy (at 12 hours and on days 3 and 7) and scanning electron microscopy (at 12 hours and day 3). 3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyl-tetrazolium bromide assay was performed on day 5 for PDL fibroblast survival.

RESULTS

3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyl-tetrazolium bromide assay shows that whereas laser-treated specimens showed a significantly higher cell density, the Gracey-treated group showed a lower cell density compared to the positive control group (P <0.05). Based on confocal microscopy, apparent reduction was observed in the attachment of PDL cells to the periodontally diseased root surfaces. In the laser and Gracey groups, cells looked well-oriented to the root surfaces. Laser-treated groups provided suitable environment for cell adhesion and growth. Laser I treatment was more favorable for the attachment of PDL compared to scaled Gracey, laser II, and even healthy root surfaces.

CONCLUSION

The results of the study indicate that short-pulse laser setup (laser I) looks more promising regarding the attachment, spreading, and orientation of PDL cells.

An in vitro evaluation of apicoectomies and retropreparations using different methods

OBJECTIVES

The aim of this study was to evaluate: 1) the apical root surface, gutta-percha interface, and preparation time of root-end resections made with burs, ultrasound, or laser; and 2) the thickness of surrounding dentin after laser or ultrasonic root-end cavity preparation.

STUDY DESIGN

1) Thirty root-filled teeth were resected as follows: Zekrya bur in group I, Chemical Vapor Deposition (CVD) ultrasonic tip (9.5107-8) in group II, and ErCr:YSGG (Waterlase) in group III. The preparation time was recorded. Replicas of the resected root-ends were examined under a scanning electron microscope (SEM). 2) Thirty root-filled teeth were submitted to apicectomies and root-end cavities were prepared by using: CVD (6.1107-6) ultrasonic retrotips (group IV), EMS (DT-060) ultrasonic retrotips (group V), and ErCr:YSGG laser tips (group VI). Replicas of the root apices were examined under a SEM.

RESULTS

There were no fissures or fractures on root-end surfaces. The bur produced the smoothest surface (P < .05). Group I had the lowest preparation time (P < .05). The best adaptation between the filling and the root canals walls was observed in group III, but it was not significantly different from group II (P < .05). No resected root-ends had cracks after preparation. Group VI showed the least minimum dentin thickness (P < .05).

CONCLUSIONS

The 3 methods evaluated did not cause any injury to the root-end surface, but they harmed the apical adaptation. Laser tips removed more dentin than ultrasonic retrotips and should be used with care to avoid overpreparation.

Construction of a standard test assembly for controlled laser studies in tissues: preliminary study on human bone material

The aim of the study is the construction of a test assembly, which facilitates objective, comparative studies on the cutting performance of lasers in hard tissue. To ensure the applicability of our own construction for the reproducible performance of laser incisions in hard tissue, eleven freshly extracted blocks (2x1.5 cm2) of human bone were prepared with a Er,Cr:YSGG laser by using a handheld handpiece, respectively, using the constructed device for a standardized cutting. A total of 44 cuts were executed. The specimen were then histologically evaluated. The standard test assembly met the requirements concerning the provision of objective results. The findings of the histological evaluation prove the reproducibility of the results. The standard test assembly presented in this paper facilitates comparative studies of different laser systems by reducing subjective influence on the preparation to a minimum. The results of this preliminary study show that the precision of the guiding instrument for laser cutting reduces the error of cut width by 50-fold, from 50 to 1 microm.

The use of the erbium, chromium:yttrium-scandium-gallium-garnet laser in endodontic treatment

BACKGROUND

The use of the erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser has become accepted in the field of cavity preparation. The development of miniaturized and flexible fiber tips has allowed this device to be used in endodontics. The authors conducted an in vitro study to assess the effects of Er,Cr:YSGG laser irradiation on root canals.

METHODS

The authors inoculated root canals with two bacteria, laser irradiated them at two power settings and subjected them to a quantitative microbiological evaluation. They used scanning electron microscopy (SEM) to assess morphological changes in endodontically processed and laser-irradiated root canal walls. They measured temperature increases on the root surface to determine possible thermal side effects.

RESULTS

The bacteriological evaluation revealed a disinfecting effect in the root dentin samples that was dependent on the output power but not specific for the bacterial species investigated. SEM showed the removal of the smear layer from the root canal walls and the exposure of dentinal tubules. The temperature rise during irradiation was moderate when standardized power settings were used.

CONCLUSIONS

The Er,Cr:YSGG laser can be used to eliminate bacteria in root canals. It also effectively removes smear layer and debris from the canal wall.

CLINICAL IMPLICATIONS

Practitioners can use the Er,Cr:YSGG laser to prepare root canals for endodontic therapy.

Influence of an Erbium, Chromium-Doped Yttrium, Scandium, Gallium, and Garnet (Er,Cr:YSGG) Laser on the Reestablishment of the Biocompatibility of Contaminated Titanium Implant Surfaces

BACKGROUND

The aim of the present study was to evaluate the influence of an erbium, chromium-doped yttrium, scandium, gallium, and garnet (Er,Cr:YSGG laser [ERCL]) on 1) the surface structure and biocompatibility of titanium implants and 2) the removal of plaque biofilms and reestablishment of the biocompatibility of contaminated titanium surfaces.

METHODS

Intraoral splints were used to collect an in vivo supragingival biofilm on sand-blasted and acid-etched titanium disks for 24 hours. ERCL was used at an energy output of 0.5, 1.0, 1.5, 2.0, and 2.5 W for the irradiation of 1) non-contaminated (20 and 25 Hz) and 2) plaque-contaminated (25 Hz) titanium disks. Unworn and untreated non-irradiated, sterile titanium disks served as untreated controls (UC). Specimens were incubated with SaOs-2 osteoblasts for 6 days. Treatment time, residual plaque biofilm (RPB) areas (%), mitochondrial cell activity (MA) (counts per second), and cell morphology/surface changes (scanning electron microscopy [SEM]) were assessed.

RESULTS

1) ERCL using either 0.5, 1.0, 1.5, 2.0, or 2.5 W at both 20 and 25 Hz resulted in comparable mean MA values as measured in the UC group. A monolayer of flattened SaOs-2 cells showing complete cytoplasmatic extensions and lamellopodia was observed in both ERCL and UC groups. 2) Mean RPB areas decreased significantly with increasing energy settings (53.8 +/- 2.2 at 0.5 W to 9.8 +/- 6.2 at 2.5 W). However, mean MA values were significantly higher in the UC group.

CONCLUSION

Within the limits of the present study, it was concluded that even though ERCL exhibited a high efficiency to remove plaque biofilms in an energy-dependent manner, it failed to reestablish the biocompatibility of contaminated titanium surfaces.

Effects of Er:YAG Laser on the Sealing of Glass Ionomer Cement Restorations of Bacterial Artificial Root Caries

OBJECTIVE

The aim of this study was to test the effect of Er:YAG laser irradiation on the marginal sealing of root cavities restored with two glass ionomer cements.

BACKGROUND DATA

For preventing secondary root caries, new technologies for dental caries removal, such as the Er:YAG laser irradiation, have been proposed.

METHODS

Forty-five human teeth were used. Artificial root caries were induced using a microbiological model (Streptococcus mutans). The lesions were removed by three different methods: conventional technique using burs (controls; groups 1 and 2); Er:YAG laser irradiation using dentine preparation parameters (250 mJ, 4 Hz, 80.6 J/cm2; groups 3 and 4); irradiation with the dentine preparation parameters followed by surface conditioning parameters (60 mJ, 2 Hz, 19.2 J/cm2; groups 6 and 7). After each preparation method, three teeth were prepared for scanning electron microscopy morphological observation. The remaining teeth were restored by conventional glass ionomer cement (G1, G3, and G5) or resin modified glass ionomer cement (G2, G4, and G6). After restoration, the samples were thermocycled (1,000 cycles) and prepared for microleakage test.

RESULTS

Scores of less infiltrated samples were observed in groups treated by Er:YAG laser, and the smallest infiltration occurred in the group treated by the dentine preparation parameter, followed by cavity restoration with resin-modified glass ionomer (p < 0.05).

CONCLUSION

Our results suggest that root caries removal by Er:YAG laser irradiation, followed by restoration with resin-modified glass ionomer cement, is a suitable choice for dental root caries restoration.

Erbium lasers in dentistry

Erbium hard tissue lasers have the capability to prepare enamel, dentin, caries, cementum, and bone in addition to cutting soft tissue. The ability of hard tissue lasers to reduce or eliminate vibrations, the audible whine of drills, microfractures, and some of the discomfort that many patients fear and commonly associate with high-speed handpieces is impressive. In addition, these lasers can be used with a reduced amount of local anesthetic for many procedures. Today, these instruments have evolved from their initial use for all classes of cavity preparations to their ability for removing soft tissue, their usefulness in the disinfection of bacteria within endodontic canals, and most recently, as an alternative to the high speed handpiece for the removal of bone in oral and maxillofacial surgery. In addition, recent research has centered on the value of the erbium family of laser wavelengths in periodontics, including the removal of calculus.

Bactericidal effect of different laser systems in the deep layers of dentin

BACKGROUND AND OBJECTIVES

In recent years, various laser systems have gained importance in the field of laser-assisted endodontics, namely the Nd:YAG, the diode, the Er:YAG, and the Er,Cr:YSGG laser. Individual studies have been carried out so far, focusing on the respective wavelength, its specific bactericidal capabilities, and potential usefulness is root-canal disinfection. The present in vitro investigation however, was performed to compare the microbicidal effect of these laser systems under standardized conditions and to draw a conclusion upon their relative effectiveness in the deep layers of dentin.

STUDY DESIGN/MATERIALS AND METHODS

In total, 360 slices of root dentin with a thickness of 1 mm were obtained by longitudinal cuts of freshly extracted human premolars. The samples were steam sterilized and subsequently inoculated with a suspension of either Escherichia coli or Enterococcus faecalis. After the incubation, the samples were randomly assigned to the four different laser systems tested. Each laser group consisted of two different operational settings and a control. The dentinal samples underwent "indirect" laser irradiation through the dentin from the bacteria-free side and were then subjected to a classical quantitative microbiologic evaluation. To assess the temperature increase during the irradiation procedure, additional measurements were carried out using a thermocouple.

RESULTS

Microbiology indicated that all laser systems were capable of significant reductions in both test strains. At an effective output power of 1 W, E. coli was reduced by at least three log steps in most of the samples by the tested wavelengths, with the best results for the Er:YAG laser showing complete eradication of E. coli in 75% of the samples. E. faecalis, a stubborn invader of the root canal, showed minor changes in bacterial count at 1 W. Using the higher setting of 1.5 W, significant reductions of E. coli were again observed with all laser systems, where only the diode and the Er:YAG laser were capable of complete eradication of E. faecalis to a significant extent. There was no significant relation between the temperature increase and the bactericidal effect.

CONCLUSIONS

The present study demonstrates that all the wavelengths investigated are suitable for the disinfection of even the deeper layers of dentin and may prove to constitute valuable tools in state-of-the-art endodontics.

Comparative Study of Carious Dentin Removal by Er,Cr:YSGG Laser and Carisolv

OBJECTIVE

The present study aimed to compare carious dentin removal by air turbine, Carisolv and erbium,chromium:yttrium,scandium,gallium,garnet (Er,Cr:YSGG) laser, and examine morphological changes before and after these caries removal techniques under light microscopy and scanning electron microscopy (SEM).

BACKGROUND DATA

Although there have been numerous studies on removing caries by Er,Cr:YSGG laser, none has compared Er,Cr:YSGG laser and Carisolv, or reported on the usage of DIAGNOdent as a diagnostic tool particularly for advanced caries in in vitro experiments.

MATERIALS AND METHODS

Sixty extracted human teeth diagnosed as advanced caries were divided into three groups based on the treatment received, namely air turbine, Carisolv, and Er,Cr:YSGG laser groups. Each group was sub-divided into two in order to examine the results with or without finishing using nylon brush, 15% ethylene diamine tetraacetic acid (EDTA) or low-power laser, respectively. After evaluation by DIAGNOdent, specimens were observed under light microscopy or SEM.

RESULTS

Light microscopic observations varied considerably in the three treatment groups. SEM revealed that the surfaces treated by air turbine were very smooth, but with substantial debris. The Carisolv group exhibited a very rough surface with a thick smear layer, while the Er,Cr:YSGG group demonstrated smooth undulations with little smear layer and debris. Among the finishing techniques, the laser group demonstrated the best efficiency. DIAGNOdent scores supported the results of light microscopy.

CONCLUSION

These results suggest that caries removal by Er,Cr:YSGG laser is very effective even without finishing and DIAGNOdent is useful for diagnosing advanced caries in in vitro experiments.