Effect of Sub-Lethal Concentrations of Biocides on the Structural Parameters and Viability of the Biofilms Formed by Salmonella Typhimurium

Characterization and long-read sequencing of biofilms formed by the microbiota present on inert surfaces in poultry slaughterhouses

Cross-contamination from inert slaughterhouse surfaces is among the main sources of contamination of poultry. The objective of the research reported here was to characterize the biofilms formed by the microbiota present on various surfaces in two poultry slaughterhouses in north-western Spain. Forty-four samples (22 from each slaughterhouse) were taken by swab rubbing at different points along the processing line (from stunning to cutting). The microbiota on all surfaces was able to form biofilms, which were studied by scanning confocal laser microscopy. The total biovolume in the observation field of 16,078.24 μm2 ranged from 22,106.8 ± 5544.3 μm3 to 414,229.6 ± 1621.0 μm3. Average values were higher in abattoir A than in abattoir B, with significant differences (P < 0.05) between surfaces. The percentage of biovolume of Gram-positive bacteria ranged between 0.02 % and 5.38 %. The highest percentages of Gram-positive bacteria were detected towards the beginning of the processing line. The microbiota of the biofilms was identified using long-read sequencing techniques (Oxford Nanopore). The predominant genera (found in >50.0 % of the biofilms) were Pseudomonas, Citrobacter, Klebsiella, Serratia, Escherichia, Enterobacter, Stenotrophomonas, Salmonella, Shewanella, Acinetobacter and Aeromonas. In addition, some pathogenic bacteria were detected, including Salmonella (31 surfaces), Yersinia enterocolitica (12), Escherichia coli O157:H7 (6), Campylobacter spp. (4) and Listeria monocytogenes (3). This research work has permitted identification of the most contaminated surfaces in poultry abattoirs and can serve as a starting point for the design of more effective cleaning and disinfection protocols.

Genetic determinants of increased sodium hypochlorite and ciprofloxacin susceptibility in Pseudomonas aeruginosa PA14 biofilms

Reactive chlorine species (RCS) like sodium hypochlorite (NaOCl) are potent oxidizing agents and widely used biocides in surface disinfection, water treatment, and biofilm elimination. Moreover, RCS are also produced by the human immune system to kill invading pathogens. However, bacteria have developed mechanisms to survive the damage caused by RCS. Using the comprehensive Pseudomonas aeruginosa PA14 transposon mutant library in a genetic screen, we identified a total of 28 P. aeruginosa PA14 mutants whose biofilms showed increased susceptibility to NaOCl in comparison to PA14 WT biofilms. Of these, ten PA14 mutants with a disrupted apaH, PA0793, acsA, PA1506, PA1547, PA3728, yajC, queA, PA3869, or PA14_32840 gene presented a 4-fold increase in NaOCl susceptibility compared to wild-type biofilms. While none of these mutants showed a defect in biofilm formation or attenuated susceptibility of biofilms toward the oxidant hydrogen peroxide (H2O2), all but PA14_32840 also exhibited a 2-4-fold increase in susceptibility toward the antibiotic ciprofloxacin. Further analyses revealed attenuated levels of intracellular ROS and catalase activity only for the apaH and PA1547 mutant, providing insights into the oxidative stress response in P. aeruginosa biofilms. The findings of this paper highlight the complexity of biofilm resistance and the intricate interplay between different mechanisms to survive oxidative stress. Understanding resistance strategies adopted by biofilms is crucial for developing more effective ways to fight resistant bacteria, ultimately contributing to better management of bacterial growth and resistance in clinical and environmental settings.

Antimicrobial Tolerance in Salmonella: Contributions to Survival and Persistence in Processing Environments

Salmonella remains a top bacterial pathogen implicated in several food-borne outbreaks, despite the use of antimicrobials and sanitizers during production and processing. While these chemicals have been effective, Salmonella has shown the ability to survive and persist in poultry processing environments. This can be credited to its microbial ability to adapt and develop/acquire tolerance and/or resistance to different antimicrobial agents including oxidizers, acids (organic and inorganic), phenols, and surfactants. Moreover, there are several factors in processing environments that can limit the efficacy of these antimicrobials, thus allowing survival and persistence. This mini-review examines the antimicrobial activity of common disinfectants/sanitizers used in poultry processing environments and the ability of Salmonella to respond with innate or acquired tolerance and survive exposure to persists in such environments. Instead of relying on a single antimicrobial agent, the right combination of different disinfectants needs to be developed to target multiple pathways within Salmonella.

Biofilm formation in food processing plants and novel control strategies to combat resistant biofilms: the case of Salmonella spp

Salmonella is one of the pathogens that cause many foodborne outbreaks throughout the world, representing an important global public health problem. Salmonella strains with biofilm-forming abilities have been frequently isolated from different food processing plants, especially in poultry industry. Biofilm formation of Salmonella on various surfaces can increase their viability, contributing to their persistence in food processing environments and cross-contamination of food products. In recent years, increasing concerns arise about the antimicrobial resistant and disinfectant tolerant Salmonella, while adaptation of Salmonella in biofilms to disinfectants exacerbate this problem. Facing difficulties to inhibit or remove Salmonella biofilms in food industry, eco-friendly and effective strategies based on chemical, biotechnological and physical methods are in urgent need. This review discusses biofilm formation of Salmonella in food industries, with emphasis on the current available knowledge related to antimicrobial resistance, together with an overview of promising antibiofilm strategies for controlling Salmonella in food production environments.

The Impact of Low-Level Benzalkonium Chloride Exposure on Staphylococcus spp. Strains and Control by Photoinactivation

Exposure of bacteria to low concentrations of biocides can facilitate horizontal gene transfer, which may lead to bacterial adaptive responses and resistance to antimicrobial agents. The emergence of antibacterial resistance not only poses a significant concern to the dairy industry but also adds to the complexity and cost of mastitis treatment. This study was aimed to evaluate how selective stress induced by benzalkonium chloride (BC) promotes antibiotic non-susceptibility in Staphylococcus spp. In addition, we investigated the efficacy of photodynamic inactivation (PDI) in both resistant and susceptible strains. The study determined the minimum inhibitory concentration (MIC) of BC using the broth microdilution method for different Staphylococcus strains. The experiments involved pairing strains carrying the qacA/qacC resistance genes with susceptible strains and exposing them to subinhibitory concentrations of BC for 72 h. The recovered isolates were tested for MIC BC and subjected to disc diffusion tests to assess changes in susceptibility patterns. The results demonstrated that subinhibitory concentrations of BC could select strains with reduced susceptibility and antibiotic resistance, particularly in the presence of S. pasteuri. The results of PDI mediated by toluidine blue (100 µM) followed by 60 min irradiation (total light dose of 2.5 J/cm2) were highly effective, showing complete inactivation for some bacterial strains and a reduction of up to 5 logs in others.

Estimation by flow cytometry of percentages of survival of Listeria monocytogenes cells treated with tetracycline, with or without prior exposure to several biocides

In certain circumstances, disinfectants are used at sublethal concentrations. The aim of this research work was to determine whether contact of Listeria monocytogenes NCTC 11994 with subinhibitory concentrations of three disinfectants widely used in food processing environments and in the health-care system, benzalkonium chloride (BZK), sodium hypochlorite (SHY) and peracetic acid (PAA), can cause the adaptation of the strain to the biocides and increase its resistance to tetracycline (TE). The minimum inhibitory concentrations (MIC; ppm) were 2.0 (BZK), 3500.0 (SHY) and 1050.0 (PAA). On exposure to increasing subinhibitory concentrations of the biocides, the maximum concentrations (ppm) of the compounds that allowed the strain to grow were (ppm) 8.5 (BZK), 3935.5 (SHY) and 1125.0 (PAA). Both the control cells (non-exposed) and the cells that had been in contact with low doses of biocides were treated with different concentrations of TE (0 ppm, 250 ppm, 500 ppm, 750 ppm, 1000 ppm and 1250 ppm) for 24, 48 and 72 h, and the survival percentages determined using flow cytometry, following dying with SYTO 9 and propidium iodide. The cells previously exposed to PAA presented higher survival percentages (P < 0.05) than the rest of the cells for most of the concentrations of TE and treatment times trialled. These results are worrying because TE is sometimes used to treat listeriosis, highlighting the importance of avoiding the use of disinfectant at subinhibitory doses. Furthermore, the findings suggest that flow cytometry is a fast and simple technique to obtain quantitative data on bacterial resistance to antibiotics.

Stress Response Mechanisms of Salmonella Enteritidis to Sodium Hypochlorite at the Proteomic Level

Salmonella Enteritidis (S. Enteritidis) can adapt to sublethal sodium hypochlorite conditions, which subsequently triggers stress resistance mechanisms in this pathogen. Hence, the current work aimed to reveal the underlying stress adaptation mechanisms in S. Enteritidis by phenotypic, proteomic, and physiological analyses. It was found that 130 ppm sodium hypochlorite resulted in a moderate inhibitory effect on bacterial growth and an increased accumulation of intracellular reactive oxygen species. In response to this sublethal treatment, a total of 492 proteins in S. Enteritidis showed significant differential abundance (p < 0.05; fold change >2.0 or <0.5), including 225 more abundant proteins and 267 less abundant proteins, as revealed by the tandem-mass-tags-based quantitative proteomics technology. Functional characterization further revealed that proteins related to flagellar assembly, two-component system, and phosphotransferase system were in less abundance, while those associated with ABC transporters were generally in more abundance. Specifically, the repression of flagellar-assembly-related proteins led to diminished swimming motility, which served as a potential energy conservation strategy. Moreover, altered abundance of lipid-metabolism-related proteins resulted in reduced cell membrane fluidity, which provided a survival advantage to S. Enteritidis. Taken together, these results indicate that S. Enteritidis employs multiple adaptation pathways to cope with sodium hypochlorite stress.

Minimum Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC) for Twelve Antimicrobials (Biocides and Antibiotics) in Eight Strains of Listeria monocytogenes

When selecting effective doses of antimicrobials, be they biocides or antibiotics, it is essential to know the minimum inhibitory concentrations (MICs) and minimum bactericidal concentrations (MBCs) of these substances. The present research determined the MICs and MBCs for three biocides, sodium hypochlorite (SH), benzalkonium chloride (BC), and peracetic acid (PAA), and nine antibiotics in eight strains of Listeria monocytogenes of varying serotypes. Marked intra-species differences were observed in the resistance of L. monocytogenes to the biocides and antibiotics. The MICs (ppm) for the biocides ranged between 1750 and 4500 for SH, 0.25 and 20.00 for BC, and 1050 and 1700 for PAA. Their MBCs (ppm) ranged from 2250 to 4500 for SH, 0.50 to 20.00 for BC, and 1150 to 1800 for PAA. The MICs (ppm) for antibiotics lay between 1 and 15 for ampicillin, 8 and 150 for cephalothin, 20 and 170 for cefoxitin, 0.05 and 0.20 for erythromycin, 4 and 50 for chloramphenicol, 3 and 100 for gentamicin, 2 and 15 for tetracycline, 2 and 80 for vancomycin, and 160 and 430 for fosfomycin. The corresponding MBCs (ppm) were from 5 to 20 for ampicillin, 9 to 160 for cephalothin, 70 to 200 for cefoxitin, 4 to 5 for erythromycin, 9 to 70 for chloramphenicol, 5 to 100 for gentamicin, 3 to 30 for tetracycline, 3 to 90 for vancomycin, and 160 to 450 for fosfomycin. Notably, erythromycin showed considerable efficacy, demonstrated by the low values for both MIC and MBC. Based on EUCAST and the CLSI criteria, all strains were susceptible to erythromycin. All strains were resistant to cephalothin, cefoxitin, gentamicin, and fosfomycin. Further values for resistance were 87.50% for ampicillin and vancomycin, 75.00% for tetracycline, and 62.50% for chloramphenicol. The high prevalence of antibiotic resistance is a matter for concern. A positive correlation was found between MIC and MBC values for most of the biocides and antibiotics. The higher the hydrophobicity of the cell surface, the higher the susceptibility to biocides, suggesting that surface characteristics of bacterial cells influence resistance to these compounds.

Benzalkonium chloride antagonises aminoglycoside antibiotics and promotes evolution of resistance

BACKGROUND

Biocide disinfectants are essential tools in infection control, but their use can inadvertently contribute to emergence of antibiotic-resistant bacteria. In this study we systematically examine the effect of the biocide benzalkonium chloride, which is primarily used for surface disinfection but is also present as a preservative in many consumer products, on the activity of aminoglycoside antibiotics in Acinetobacter baumannii.

METHODS

The effect of subinhibitory BAC on aminoglycoside treatment of A. baumannii ATCC17978 was investigated using time-to-kill assays, MIC determination, directed evolution experiments, fluctuation tests and labelled gentamicin accumulation assays. Further MIC determinations and directed evolution experiments were performed with additional Gram-negative ESKAPE pathogens.

FINDINGS

In A. baumannii ATCC17978, BAC prevents gentamicin killing and drastically increases the frequency at which resistant mutants emerge, through reducing intracellular antibiotic accumulation. BAC also increases the MIC of multiple aminoglycoside antibiotics (kanamycin, tobramycin, streptomycin, gentamicin and amikacin). BAC promotes the emergence of mutants with reduced gentamicin susceptibility in other Gram-negative ESKAPE pathogens but does not always alter the MIC. These effects occur at BAC concentrations which are similar to residual levels in high-use environments, and just below the concentration range for BAC when used as a preservative in eye drops and ear drops.

INTERPRETATION

Our results suggest that subinhibitory BAC has the potential to antagonise aminoglycoside activity and promote the emergence of bacterial mutants with reduced susceptibility. We suggest that the extremely widespread use of BAC in clinical and home settings and its long half-life mean there is potential for these interactions to occur in the environment, or in patients who use BAC-containing products while taking aminoglycosides to treat skin, eye or ear infections, although such co-exposure is likely to be rare. We suggest that biocide stewardship is needed to prevent the types of exposure that can contribute to antibiotic resistance.

FUNDING

This work was funded by the National Health and Medical Research Council of Australia. The funders had no role in study design, interpretation or decision to publish.

Molecular Characterization and Survive Abilities of Salmonella Heidelberg Strains of Poultry Origin in Brazil

The aim of the study was to evaluate the genotypic and phenotypic characteristics of 20 strains of S. Heidelberg (SH) isolated from broilers produced in southern Brazil. The similarity and presence of genetic determinants linked to virulence, antimicrobial resistance, biofilm formation, and in silico-predicted metabolic interactions revealed this serovar as a threat to public health. The presence of the ompC, invA, sodC, avrA, lpfA, and agfA genes was detected in 100% of the strains and the luxS gene in 70% of them. None of the strains carries the bla_SHV, mcr-1, qnrA, qnrB, and qnrS genes. All strains showed a multidrug-resistant profile to at least three non-β-lactam drugs, which include colistin, sulfamethoxazole, and tetracycline. Resistance to penicillin, ceftriaxone (90%), meropenem (25%), and cefoxitin (25%) were associated with the presence of bla_CTX–M and bla_CMY–2 genes. Biofilm formation reached a mature stage at 25 and 37°C, especially with chicken juice (CJ) addition. The sodium hypochlorite 1% was the least efficient in controlling the sessile cells. Genomic analysis of two strains identified more than 100 virulence genes and the presence of resistance to 24 classes of antibiotics correlated to phenotypic tests. Protein-protein interaction (PPI) prediction shows two metabolic pathways correlation with biofilm formation. Virulence, resistance, and biofilm determinants must be constant monitoring in SH, due to the possibility of occurring infections extremely difficult to cure and due risk of the maintenance of the bacterium in production environments.

Surviving Reactive Chlorine Stress: Responses of Gram-Negative Bacteria to Hypochlorous Acid

Sodium hypochlorite (NaOCl) and its active ingredient, hypochlorous acid (HOCl), are the most commonly used chlorine-based disinfectants. HOCl is a fast-acting and potent antimicrobial agent that interacts with several biomolecules, such as sulfur-containing amino acids, lipids, nucleic acids, and membrane components, causing severe cellular damage. It is also produced by the immune system as a first-line of defense against invading pathogens. In this review, we summarize the adaptive responses of Gram-negative bacteria to HOCl-induced stress and highlight the role of chaperone holdases (Hsp33, RidA, Cnox, and polyP) as an immediate response to HOCl stress. We also describe the three identified transcriptional regulators (HypT, RclR, and NemR) that specifically respond to HOCl. Besides the activation of chaperones and transcriptional regulators, the formation of biofilms has been described as an important adaptive response to several stressors, including HOCl. Although the knowledge on the molecular mechanisms involved in HOCl biofilm stimulation is limited, studies have shown that HOCl induces the formation of biofilms by causing conformational changes in membrane properties, overproducing the extracellular polymeric substance (EPS) matrix, and increasing the intracellular concentration of cyclic-di-GMP. In addition, acquisition and expression of antibiotic resistance genes, secretion of virulence factors and induction of the viable but nonculturable (VBNC) state has also been described as an adaptive response to HOCl. In general, the knowledge of how bacteria respond to HOCl stress has increased over time; however, the molecular mechanisms involved in this stress response is still in its infancy. A better understanding of these mechanisms could help understand host-pathogen interactions and target specific genes and molecules to control bacterial spread and colonization.

Biovolume and spatial distribution of foodborne Gram-negative and Gram-positive pathogenic bacteria in mono- and dual-species biofilms

The objective of this study was to characterize the biofilms formed by Salmonella enterica serotype Agona, Listeria monocytogenes, methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus faecium (VRE) after 12, 48, 72, 120 and 240 h of incubation at 10 °C. Biofilms containing a single species, together with dual-species biofilms in which S. enterica and a Gram-positive bacterium existed in combination, were formed on polystyrene and evaluated by using confocal laser scanning microscopy (CLSM). All strains were able to form biofilm. The greatest biovolume in the observation field of 14,161 μm² was observed for mono-species biofilms after 72 h, where biovolumes of 94,409.0 μm³ ± 2131.0 μm³ (S. enterica), 58,418.3 μm³ ± 5944.9 μm³ (L. monocytogenes), 68,020.8 μm³ ± 5812.3 μm³ (MRSA) and 59,280.0 μm³ ± 4032.9 μm³ (VRE) were obtained. In comparison with single-species biofilms, the biovolume of S. enterica was higher in the presence of MRSA or VRE after 48, 72 and 120 h. In dual-species biofilms, the bacteria showed a double-layer distribution pattern, with S. enterica in the top layer and Gram-positive bacteria in the bottom layer. This spatial disposition should be taken into account when effective strategies to eliminate biofilms are being developed.

Antimicrobial resistance associated with the use of antimicrobial processing aids during poultry processing operations: cause for concern?

Antimicrobial resistance has become a global issue and a threat to human and animal health. Contamination of poultry carcasses with meat-borne pathogens represents both an economic and a public health concern. The use of antimicrobial processing aids (APA) during poultry processing has contributed to an improvement in the microbiological quality of poultry carcasses. However, the extensive use of these decontaminants has raised concerns about their possible role in the co-selection of antibiotic-resistant bacteria. This topic is presented in the current review to provide an update on the information related to bacterial adaptation to APA used in poultry processing establishments, and to discuss the relationship between APA bacterial adaptation and the acquisition of a new resistance phenotype to therapeutic antimicrobials by bacteria. Common mechanisms such as active efflux and changes in membrane fluidity are the most documented mechanisms responsible for bacterial cross-resistance to APA and antimicrobials. Although most studies reported a bacterial resistance to antibiotics not reaching a clinical level, the under-exposure of bacteria to APA remains a concern in the poultry industry. Further research is needed to determine if APA used during poultry processing and therapeutic antimicrobials share common sites of action in bacteria and encounter similar mechanisms of resistance.

Rugose Morphotype in Salmonella Typhimurium and Salmonella Heidelberg Induced by Sequential Exposure to Subinhibitory Sodium Hypochlorite Aids in Biofilm Tolerance to Lethal Sodium Hypochlorite on Polystyrene and Stainless Steel Surfaces

Salmonella biofilms act as a continuous source for cross-contamination in the food processing environments. In this study, a stable rugose morphotype of Salmonella was first induced by sequential exposure to subinhibitory concentrations (SICs) of sodium hypochlorite (NaOCl) (ranging from 50 to 300 ppm over 18-day period) in tryptic soy broth. Then, rugose and smooth morphotypes of Salmonella Typhimurium ATCC 14028 and Salmonella Heidelberg ATCC 8326 were characterized for biofilm forming abilities on polystyrene and stainless steel surfaces. Rugose morphotype of both ATCC 14028 and ATCC 8326 exhibited higher Exopolysaccharide (EPS) formation than smooth morphotype (p ≤ 0.05). Also, the SICs of NaOCl (200 or 300 ppm in broth model) increased the biofilm formation ability of rugose morphotype of ATCC 8326 (p ≤ 0.05) but decreased that of ATCC 14028. The 2-day-old Salmonella biofilms were treated with biocidal concentrations of 50, 100, or 200 ppm NaOCl (pH 6.15) in water for 5, 10, or 20 min at room temperature. The biofilm reduction in CFU/cm2 for the rugose was lower than the smooth morphotype on both surfaces (p ≤ 0.05) by lethal NaOCl in water. Scanning electron micrographs on both polystyrene and stainless steel surfaces demonstrated that the rugose morphotype produced a denser biofilm than the smooth morphotype. Transmission electron micrographs revealed the cell wall roughness in rugose morphotype, which may help in tolerance to NaOCl. The gene expression data indicate that the expression of biofilm regulator (csgD), curli (csgA, csgB, and csgC), and cellulose (bcsE) was significantly increased in rugose morphotype when induced by sequential exposure of NaOCl SICs. These findings reveal that the rugose morphotype of S. Typhimurium and S. Heidelberg produced significantly denser biofilm on food contact surfaces, which also increased with sequential exposure to SICs of NaOCl in the case of S. Heidelberg, and these biofilms were more tolerant to biocidal NaOCl concentrations commonly used in the food processing plants.

Persistent Listeria monocytogenes Isolates from a Poultry-Processing Facility Form more Biofilm but Do Not Have a Greater Resistance to Disinfectants Than Sporadic Strains

Some strains of Listeria monocytogenes can persist in food-processing environments, increasing the likelihood of the contamination of foodstuffs. To identify traits that contribute to bacterial persistence, a selection of persistent and sporadic L. monocytogenes isolates from a poultry-processing facility was investigated for biofilm-forming ability (crystal violet assay). The susceptibility of sessile cells to treatments (five minutes) with sodium hypochlorite having 10% active chlorine (SHY: 10,000 ppm, 25,000 ppm, and 50,000 ppm) and benzalkonium chloride (BZK: 2500 ppm, 10,000 ppm, and 25,000 ppm) was also studied. All isolates exhibited biofilm formation on polystyrene. Persistent strains showed larger (p < 0.001) biofilm formation (OD580 = 0.301 ± 0.097) than sporadic strains (OD580 = 0.188 ± 0.082). A greater susceptibility to disinfectants was observed for biofilms of persistent strains than for those of sporadic strains. The application of SHY reduced biofilms only for persistent strains. BZK increased OD580 in persistent strains (2500 ppm) and in sporadic strains (all concentrations). These results indicate that the use of BZK at the concentrations tested could represent a public health risk. Findings in this work suggest a link between persistence and biofilm formation, but do not support a relationship between persistence and the resistance of sessile cells to disinfectants.

Effect of low doses of biocides on the antimicrobial resistance and the biofilms of Cronobacter sakazakii and Yersinia enterocolitica

The susceptibility of Cronobacter sakazakii ATCC 29544 (CS) and Yersinia enterocolitica ATCC 9610 (YE) to sodium hypochlorite (10% of active chlorine; SHY), peracetic acid (39% solution of peracetic acid in acetic acid; PAA) and benzalkonium chloride (BZK) was tested. Minimum inhibitory concentration (MIC) values (planktonic cells; microdilution broth method) of 3,800 ppm (SHY), 1,200 ppm (PAA) and 15 ppm (BZK) for CS, and 2,500 ppm (SHY), 1,275 ppm (PAA) and 20 ppm (BZK) for YE, were found. In some instances, an increase in growth rate was observed in presence of sub-MICs (0.25MIC, 0.50MIC or 0.75MIC) of biocides relative to the samples without biocides. The cultures exhibited an acquired tolerance to biocides and an increase in antibiotic resistance after exposure to sub-MICs of such disinfectants. Strains were able to form strong biofilms on polystyrene after 48 hours (confocal laser scanning microscopy), with average biovolumes in the observation field (14,161 µm2) of 242,201.0 ± 86,570.9 µm3 (CS) and 190,184.5 ± 40,860.3 µm3 (YE). Treatment of biofilms for 10 minutes with disinfectants at 1MIC or 2MIC reduced the biovolume of live cells. PAA (YE) and BZK (CS and YE) at 1MIC did not alter the percentage of dead cells relative to non-exposed biofilms, and their effect of countering biofilm was due principally to the detachment of cells. These results suggest that doses of PAA and BZK close to MICs might lead to the dissemination of live bacteria from biofilms with consequent hazards for public health.

Effect of Sodium Hypochlorite and Benzalkonium Chloride on the Structural Parameters of the Biofilms Formed by Ten Salmonella enterica Serotypes

The influence of the strain on the ability of Salmonella enterica to form biofilms on polystyrene was investigated by confocal laser scanning microscopy. The effects of sodium hypochlorite with 10% active chlorine (SHY; 25,000, 50,000, or 100,000 ppm), and benzalkonium chloride (BZK; 1000, 5000, or 10,000 ppm) on twenty-four-hour-old biofilms was also determined. The biofilms of ten Salmonella enterica isolates from poultry (S. Agona, S. Anatum, S. Enteritidis, S. Hadar, S. Infantis, S. Kentucky, S. Thompson, S. Typhimurium, monophasic variant of S. Typhimurium 1,4,(5),12:i:-, and S. Virchow) were studied. Biofilms produced by S. Anatum, S. Hadar, S. Kentucky, and S. Typhimurium showed a trend to have the largest biovolume and the greatest surface coverage and thickness. The smallest biofilms (P < 0.01) in the observation field (14.2 × 103 µm2) were produced by S. Enteritidis and S. 1,4,(5),12:i:- (average 12.9 × 103 ± 9.3 × 103 µm3) compared to the rest of the serotypes (44.4 × 103 ± 24.7 × 103 µm3). Biovolume and surface coverage decreased after exposure for ten minutes to SHY at 50,000 or 100,000 ppm and to BZK at 5000 or 10,000 ppm. However, the lowest concentrations of disinfectants increased biovolume and surface coverage in biofilms of several strains (markedly so in the case of BZK). The results from this study suggest that the use of biocides at low concentrations could represent a public health risk. Further research studies under practical field conditions should be appropriate to confirm these findings.

Susceptibility of Listeria monocytogenes planktonic cultures and biofilms to sodium hypochlorite and benzalkonium chloride

The susceptibility of four L. monocytogenes isolates from pork to sodium hypochlorite (SHY) and benzalkonium chloride (BZK) was tested. Minimum inhibitory concentration (MIC) values of 3500 ppm (SHY), or between 3 ppm and 13 ppm (BZK), were found. Minimum bactericidal concentration (MBC) values ranged from 3500 ppm to 4500 ppm (SHY), and from 3 ppm to 14 ppm (BZK). The effect of SHY and BZK on the architecture and cellular viability of 24-h-old biofilms formed by such strains on polystyrene was determined through confocal laser scanning microscopy (CLSM) in conjunction with fluorescent dyes for live cells (SYTO 9) and dead cells (propidium iodide). Strains were able to form biofilm (biovolume values in the observation field of 14,161 μm² ranged between 103,928.3 ± 6730.2 μm³ and 276,030.9 ± 42,291.9 μm³). Treatment of biofilms for 10 min with SHY (1MIC or 1.5MIC) or BZK (0.5MIC, 1MIC or 1.5MIC) decreased the biovolume of live (potentially dangerous) cells. SHY reduced the cellular viability of biofilms by more than 90%. On the other hand, BZK was able to remove most biofilm mass (live and dead cells), but decreased cellular viability only to a lesser extent, this suggesting strong biofilm detachment and dissemination of live cells.

Biofilms in Food Processing Environments: Challenges and Opportunities

This review examines the impact of microbial communities colonizing food processing environments in the form of biofilms on food safety and food quality. The focus is both on biofilms formed by pathogenic and spoilage microorganisms and on those formed by harmless or beneficial microbes, which are of particular relevance in the processing of fermented foods. Information is presented on intraspecies variability in biofilm formation, interspecies relationships of cooperativism or competition within biofilms, the factors influencing biofilm ecology and architecture, and how these factors may influence removal. The effect on the biofilm formation ability of particular food components and different environmental conditions that commonly prevail during food processing is discussed. Available tools for the in situ monitoring and characterization of wild microbial biofilms in food processing facilities are explored. Finally, research on novel agents or strategies for the control of biofilm formation or removal is summarized.

Effects of Bacteriophage P100 at Different Concentrations on the Structural Parameters of Listeria monocytogenes Biofilms

Because listeriosis is one of the deadliest foodborne diseases, controlling and eradicating Listeria monocytogenes biofilms is a serious challenge for food safety. Biofilms (24 h old) formed on polystyrene by a L. monocytogenes strain of food origin were exposed for a further 24 h to 12 different concentrations (from 10⁰ to 10¹¹ PFU/mL) of the bacteriophage P100 (Listex P100). The structural parameters of biofilms were studied by using confocal laser scanning microscopy and digital image analysis. The biovolume in the observation field (14,121 μm²) of control (untreated) biofilms was 237,333.1 ± 2,692.6 μm³. The biomass of treated biofilms ranged from 164.7 ± 89.0 μm³ (biofilms exposed to 10¹⁰ PFU/mL) to 231,170.5 ± 15,142.0 μm³ (10⁰ PFU/mL). The lowest biomass was achieved after treatment with 10⁸ PFU/mL, with no further decrease in biovolume when higher phage concentrations were used. A strong ( P < 0.001) correlation was found between phage concentration (log units) and biovolume (-0.965), surface coverage (-0.939), roughness (0.976), maximum thickness (-0.853), and average thickness (-0.965). Findings from this research suggest that bacteriophage P100 at concentrations equal to or greater than 8 log PFU/mL successfully removes L. monocytogenes biofilms from polystyrene surfaces.

Mechanisms of biofilm stimulation by subinhibitory concentrations of antimicrobials

Biofilms are a typical mode of growth for most microorganisms and provide them with a variety of survival benefits. Biofilms can pose medical and industrial challenges due to their increased tolerance of antimicrobials and disinfectants. Exposure of bacteria to subinhibitory concentrations of those compounds can further exacerbate the problem, as they provoke physiological changes that lead to increased biofilm production and potential therapeutic failure. The protected niche of a biofilm provides conditions that promote selection for persisters and resistant mutants. In this review we discuss our current understanding of the mechanisms underlying biofilm stimulation in response to subinhibitory antimicrobials, and how we might exploit this 'anti-antibiotic' phenotype to treat biofilm-related infections and discover new compounds.

Visualization and quantification of the cellular and extracellular components of Salmonella Agona biofilms at different stages of development

Salmonella is a major food-borne pathogen able to persist in food processing environments because of its ability to form biofilms. A Salmonella enterica serotype Agona isolate from poultry (S24) was grown at 37°C in biofilms for up to 144 hours (H144) in attachment to polystyrene surfaces. Biofilm structures were examined at different stages in their development (H3, H24, H48, H72, H96 and H144) using confocal laser scanning microscopy (CLSM) in conjunction with fluorescent dyes for live cells (SYTO 9), dead cells (propidium iodide), proteins (fluorescein isothiocyanate isomer I), lipids (DiD'oil), α-polysaccharides (concanavalin A, tetramethylrhodamine conjugate), and β-polysaccharides (calcofluor white M2R). Strain S24 developed a robust biofilm at H72 (biovolume of 166,852.5 ± 13,681.8 μm3 in the observation field of 16,078.2 μm2). The largest biovolume of live cells was also detected at H72 (128,110.3 ± 4,969.1 μm3), decreasing thereafter, which was probably owing to the detachment of cells prior to a new phase of colonization. The percentage of dead cells with regard to total cells in the biofilms increased throughout the incubation, ranging from 2.3 ± 1.1% (H24) to 44.2 ± 11.0% (H144). Proteins showed the greatest biovolume among the extracellular components within the biofilms, with values ranging from 1,295.1 ± 1,294.9 μm3 (H3) to 19,186.2 ± 8,536.0 μm3 (H96). Maximum biovolume values of 15,171.9 ± 660.7 μm3 (H48), 7,055.3 ± 4,415.2 μm3 (H144), and 2,548.6 ± 1,597.5 μm3 (H72) were observed for β-polysaccharides, α-polysaccharides and lipids, respectively. A strong (P < 0.01) positive correlation was found between the total biovolume of biofilm and the biovolume of live cells, proteins and β-polysaccharides, which may serve as useful markers of biofilm formation. The present work provides new insights into the formation of S. Agona biofilms. Our findings may contribute to the designing of reliable strategies for preventing and removing these bacterial communities.