Simulation for Foregut and Bariatric Surgery: Current Status and Future Directions

Effect of virtual reality training to enhance laparoscopic assistance skills

BACKGROUND

While laparoscopic assistance is often entrusted to less experienced individuals, such as residents, medical students, and operating room nurses, it is important to note that they typically receive little to no formal laparoscopic training. This deficiency can lead to poor visibility during minimally invasive surgery, thus increasing the risk of errors. Moreover, operating room nurses and medical students are currently not included as key users in structured laparoscopic training programs.

OBJECTIVES

The aim of this study is to evaluate the laparoscopic skills of OR nurses, clinical medical postgraduate students, and residents before and after undergoing virtual reality training. Additionally, it aimed to compare the differences in the laparoscopic skills among different groups (OR nurses/Students/Residents) both before and after virtual reality training.

METHODS

Operating room nurses, clinical medical postgraduate students and residents from a tertiary Grade A hospital in China in March 2022 were selected as participants. All participants were required to complete a laparoscopic simulation training course in 6 consecutive weeks. One task from each of the four training modules was selected as an evaluation indicator. A before-and-after self-control study was used to compare the basic laparoscopic skills of participants, and laparoscopic skill competency was compared between the groups of operating room nurses, clinical medical postgraduate students, and residents.

RESULTS

Twenty-seven operating room nurses, 31 clinical medical postgraduate students, and 16 residents were included. The training course scores for the navigation training module, task training module, coordination training module, and surgical skills training module between different groups (operating room nurses/clinical medical postgraduate/residents) before laparoscopic simulation training was statistically significant (p < 0.05). After laparoscopic simulation training, there was no statistically significant difference in the training course scores between the different groups. The surgical level scores before and after the training course were compared between the operating room nurses, clinical medical postgraduate students, and residents and showed significant increases (p < 0.05).

CONCLUSION

Our findings show a significant improvement in laparoscopic skills following virtual surgery simulation training across all participant groups. The integration of virtual surgery simulation technology in surgical training holds promise for bridging the gap in laparoscopic skill development among health care professionals.

Assessment of laparoscopic intracorporeal intestinal anastomosis training using simulation-based 3D printed models: exploring surgical performance and learning curves

BACKGROUND AND AIMS

Intestinal anastomosis is a clinical procedure widely used to reconstruct the digestive tract, but authentic laparoscopic intracorporeal intestinal anastomosis (LIIA) models are lacking. However, three-dimensional (3D) printing can enable authentic and reusable models. In this paper, a novel cost-effective 3D-printing training model of LIIA is designed and the authenticity and validity of the model are tested.

METHODS

A fused deposition modeling 3D printing and an assembled lab model were built to test LIIA. Fifteen surgeons were required to perform LIIA, and their operation score and time were recorded and analyzed. Five experts were invited to assess the face and content validity of the models. A study was also performed to further evaluate and validate the learning curve of surgeons.

RESULTS

The difference in modified anastomosis objective structured assessment of technical skills (MAOSATS) scores between the expert, intermediate, and novice groups were significant (64.1±1.8: 48.5±1.7: 29.5±3.1, P <0.001). In addition, the operation time of the procedure was statistically different for all three groups (21.5±1.9: 30.6±2.8:70.7±4.0, P<0.001 ). The five experts rated the face and content validity of the model very highly, with the median being four out of five. Surgeons who underwent repeated training programs showed improved surgical performance. After eight training sessions, the novices' performance was similar to that of the average level of untrained intermediates, while the operation scores of the intermediates were close to that of the average level of experts.

CONCLUSIONS

In this study, it is found that the LIIA model exhibits excellent face, content, and construct validity. Repeated simulation training of the LIIA training program improved the surgeon's operative performance, so the model is considered one of the most effective methods for LIIA training and assessment of surgical quality in the future and for reducing healthcare costs.

Intentional enterotomies: validation of a novel robotic surgery training exercise

While laparoscopic simulation-based training is a well-established component of general surgery training, no such requirement or standardized curriculum exists for robotic surgery. Furthermore, there is a lack of high-fidelity electrocautery simulation training exercises in the literature. Using Messick's validity framework, we sought to determine the content, response process, internal content and construct validity of a novel inanimate tissue model that utilizes electrocautery for potential incorporation in such curricula. A multi-institutional, prospective study involving medical students (MS) and general surgery residents (PGY1-3) was conducted. Participants performed an exercise using a biotissue bowel model on the da Vinci Xi robotic console during which they created an enterotomy using electrocautery, followed by approximation with interrupted sutures. Participant performance was recorded and then scored by crowd-sourced assessors of technical skill, along with three of the authors. Construct validity was determined via difference in Global Evaluative Assessment of Robotic Skills (GEARS) score, time to completion, and total number of errors between the two cohorts. Upon completion of the exercise, participants were surveyed on their perception of the exercise and its impact on their robotic training to determine content validity. 31 participants were enrolled and separated into two cohorts: MS + PGY1 vs. PGY2-3. Time spent on the robotic trainer (0.8 vs. 8.13 h, p = 0.002), number of bedside robotic assists (5.7 vs. 14.8, p < 0.001), and number of robotic cases as primary surgeon (0.3 vs. 13.1, p < 0.001) were statistically significant between the two groups. Differences in GEARS scores (18.5 vs. 19.9, p = 0.001), time to completion (26.1 vs. 14.4 min, p < 0.001), and total errors (21.5 vs. 11.9, p = 0.018) between the groups were statistically significant as well. Of the 23 participants that completed the post-exercise survey, 87% and 91.3% reported improvement in robotic surgical ability and confidence, respectively. On a 10-point Likert scale, respondents rated the realism of the exercise 7.5, educational benefit 9.1, and effectiveness in teaching robotic skills 8.7. Controlling for the upfront investment of certain training materials, each exercise iteration cost ~ $30. This study confirmed the content, response process, internal structure and construct validity of a novel, high-fidelity and cost-effective inanimate tissue exercise which successfully incorporates electrocautery. Consideration should be given to its addition to robotic surgery training programs.

Five-Year Experience Training Surgeons with a Laparoscopic Simulation Training Program for Bariatric Surgery: a Quasi-experimental Design

PURPOSE

Nearly 200,000 laparoscopic Roux-en-Y gastric bypass (LRYGB) are performed yearly. Reported learning curves range between 50 and 150, even 500 cases to decrease the operative risk. Simulation programs could accelerate this learning curve safely; however, trainings for LRYGB are scarce. This study aims to describe and share our 5-year experience of a simulated program designed to achieve proficiency in LRYGB technical skills.

MATERIALS AND METHODS

A quasi-experimental design was used. All recruited participants were previously trained with basic and advanced laparoscopic simulation curriculum completing over 50 h of practical training. Ex vivo animal models were used to practice manual and stapled gastrojejunostomy (GJ) and stapled jejunojejunostomy (JJO) in 10, 3, and 4 sessions, respectively. The main outcome was to assess the manual GJ skill acquisition. Pre- and post-training assessments using a Global Rating Scale (GRS; max 25 pts), Specific Rating Scale (SRS; max 20 pts), performance time, permeability, and leakage rates were analyzed. For the stapled GJ and JJO, execution time was registered. Data analysis was performed using parametric tests.

RESULTS

In 5 years, 68 trainees completed the program. For the manual GJ's pre- vs post-training assessment, GRS and SRS scores increased significantly (from 17 to 24 and from 13 to 19 points respectively, p-value < 0.001). Permeability rate increased while leakage rate and procedural time decreased significantly.

CONCLUSION

This simulated training program showed effectiveness in improving laparoscopic skills for manual GJ and JJO in a simulated scenario. This new training program could optimize the clinical learning curve. Further studies are needed to assess the transfer of skills to the operating room.

Technical skills simulation in transplant surgery: a systematic review

Purpose

 Transplant surgery is a demanding field in which the technical skills of the surgeon correlates with patient outcomes. As such, there is potential for simulation-based training to play an important role in technical skill acquisition. This study provides a systematic assessment of the current literature regarding the use of simulation to improve surgeon technical skills in transplantation.

Methods

 Data were collected by performing an electronic search of the PubMed and Scopus database for articles describing simulation in transplant surgery. The abstracts were screened using the preferred reporting items for systematic reviews and meta-analysis (PRISMA) guidelines. Three reviewers analyzed 172 abstracts and agreed upon articles that met the inclusion criteria for the systematic review.

Results

 Simulators can be categorized into virtual reality simulators, cadaveric models, animal models (animate or inanimate) and synthetic physical models. No virtual reality simulators in transplant surgery are described in the literature. Three cadaveric models, seven animal models and eight synthetic physical models specific to transplant surgery are described. A total of 18 publications focusing on technical skills simulation in kidney, liver, lung, pancreas, and cardiac transplantation were found with the majority focusing on kidney transplantation.

Conclusions

 This systematic review identifies currently reported simulation models in transplant surgery. This will serve as a reference for general surgery and transplant surgery professionals interested in using simulation to enhance their technical skills.

Anatomical Engineering and 3D Printing for Surgery and Medical Devices: International Review and Future Exponential Innovations

Three-dimensional printing (3DP) has recently gained importance in the medical industry, especially in surgical specialties. It uses different techniques and materials based on patients' needs, which allows bioprofessionals to design and develop unique pieces using medical imaging provided by computed tomography (CT) and magnetic resonance imaging (MRI). Therefore, the Department of Biology and Medicine and the Department of Physics and Engineering, at the Bioastronautics and Space Mechatronics Research Group, have managed and supervised an international cooperation study, in order to present a general review of the innovative surgical applications, focused on anatomical systems, such as the nervous and craniofacial system, cardiovascular system, digestive system, genitourinary system, and musculoskeletal system. Finally, the integration with augmented, mixed, virtual reality is analyzed to show the advantages of personalized treatments, taking into account the improvements for preoperative, intraoperative planning, and medical training. Also, this article explores the creation of devices and tools for space surgery to get better outcomes under changing gravity conditions.