Engineering In Situ Cross-Linkable and Neurocompatible Hydrogels

Integrin binding peptides facilitate growth and interconnected vascular-like network formation of rat primary cortical vascular endothelial cells in vitro

Neovascularization and angiogenesis in the brain are important physiological processes for normal brain development and repair/regeneration following insults. Integrins are cell surface adhesion receptors mediating important function of cells such as survival, growth and development during tissue organization, differentiation and organogenesis. In this study, we used an integrin-binding array platform to identify the important types of integrins and their binding peptides that facilitate adhesion, growth, development, and vascular-like network formation of rat primary brain microvascular endothelial cells. Brain microvascular endothelial cells were isolated from rat brain on post-natal day 7. Cells were cultured in a custom-designed integrin array system containing short synthetic peptides binding to 16 types of integrins commonly expressed on cells in vertebrates. After 7 days of culture, the brain microvascular endothelial cells were processed for immunostaining with markers for endothelial cells including von Willibrand factor and platelet endothelial cell adhesion molecule. 5-Bromo-2'-dexoyuridine was added to the culture at 48 hours prior to fixation to assess cell proliferation. Among 16 integrins tested, we found that α₅β₁, α_vβ₅ and α_vβ₈ greatly promoted proliferation of endothelial cells in culture. To investigate the effect of integrin-binding peptides in promoting neovascularization and angiogenesis, the binding peptides to the above three types of integrins were immobilized to our custom-designed hydrogel in three-dimensional (3D) culture of brain microvascular endothelial cells with the addition of vascular endothelial growth factor. Following a 7-day 3D culture, the culture was fixed and processed for double labeling of phalloidin with von Willibrand factor or platelet endothelial cell adhesion molecule and assessed under confocal microscopy. In the 3D culture in hydrogels conjugated with the integrin-binding peptide, brain microvascular endothelial cells formed interconnected vascular-like network with clearly discernable lumens, which is reminiscent of brain microvascular network in vivo. With the novel integrin-binding array system, we identified the specific types of integrins on brain microvascular endothelial cells that mediate cell adhesion and growth followed by functionalizing a 3D hydrogel culture system using the binding peptides that specifically bind to the identified integrins, leading to robust growth and lumenized microvascular-like network formation of brain microvascular endothelial cells in 3D culture. This technology can be used for in vitro and in vivo vascularization of transplants or brain lesions to promote brain tissue regeneration following neurological insults.

Antioxidative and Angiogenic Hyaluronic Acid-Based Hydrogel for the Treatment of Peripheral Artery Disease

Peripheral arterial disease (PAD) is a progressive atherosclerotic disorder characterized by blockages of the arteries supplying the lower extremities. Ischemia initiates oxidative damage and mitochondrial dysfunction in the legs of PAD patients, causing injury to the tissues of the leg, significant decline in walking performance, leg pain while walking, and in the most severe cases, nonhealing ulcers and gangrene. Current clinical trials based on cells/stem cells, the trophic factor, or gene therapy systems have shown some promising results for the treatment of PAD. Biomaterial matrices have been explored in animal models of PAD to enhance these therapies. However, current biomaterial approaches have not fully met the essential requirements for minimally invasive intramuscular delivery to the leg. Ideally, a biomaterial should present properties to ameliorate oxidative stress/damage and failure of angiogenesis. Recently, we have created a thermosensitive hyaluronic acid (HA) hydrogel with antioxidant capacity and skeletal muscle-matching stiffness. Here, we further optimized HA hydrogels with the cell adhesion peptide RGD to facilitate the development of vascular-like structures in vitro. The optimized HA hydrogel reduced intracellular reactive oxygen species levels and preserved vascular-like structures against H₂O₂-induced damage in vitro. HA hydrogels also provided prolonged release of the vascular endothelial growth factor (VEGF). After injection into rat ischemic hindlimb muscles, this VEGF-releasing hydrogel reduced lipid oxidation, regulated oxidative-related genes, enhanced local blood flow in the muscle, and improved running capacity of the treated rats. Our HA hydrogel system holds great potential for the treatment of the ischemic legs of patients with PAD.

Synthesis and characterization of a hyaluronic acid-based hydrogel with antioxidative and thermosensitive properties

Peripheral arterial disease (PAD) is initiated by progressive atherosclerotic blockages of the arteries supplying the lower extremities. The most common presentation of PAD is claudication (leg pain and severe walking limitation), with many patients progressing to limb threatening ischemia and amputation. Biomaterial approaches are just beginning to be explored in the therapy of PAD with different materials now being evaluated for the delivery of cells or growth factors in animal models of PAD. A biomaterial matrix optimized for minimally invasive injection in the ischemic leg muscles of patients with PAD is urgently needed. There are several important requirements for optimal delivery, retention, and performance of a biomaterial matrix in the mechanically, histologically, and biochemically dynamic intramuscular environment of the PAD leg. Ideally, the material should have mechanical properties matching those of the recipient muscle, undergo minimal swelling, and should introduce properties that can ameliorate the mechanisms operating in PAD like oxidative stress and damage. Here we have developed an injectable, antioxidative, and thermosensitive hydrogel system based on hyaluronic acid (HA). We first synthesized a unique crosslinker of disulfide-modified poloxamer F127 diacrylate. This crosslinker led to the creation of a thermosensitive HA hydrogel with minimal swelling and muscle-matching mechanical properties. We introduced unique disulfide groups into hydrogels which functioned as an effective reactive oxygen species scavenger, exhibited hydrogen peroxide (H2O2)-responsive degradation, and protected cells against H2O2-induced damage. Our antioxidative thermosensitive HA hydrogel system holds great potential for the treatment of the ischemic legs of patients with PAD.

Nanofiber-hydrogel composite-mediated angiogenesis for soft tissue reconstruction

Soft tissue losses from tumor removal, trauma, aging, and congenital malformation affect millions of people each year. Existing options for soft tissue restoration have several drawbacks: Surgical options such as the use of autologous tissue flaps lead to donor site defects, prosthetic implants are prone to foreign body response leading to fibrosis, and fat grafting and dermal fillers are limited to small-volume defects and only provide transient volume restoration. In addition, large-volume fat grafting and other tissue-engineering attempts are hampered by poor vascular ingrowth. Currently, there are no off-the-shelf materials that can fill the volume lost in soft tissue defects while promoting early angiogenesis. Here, we report a nanofiber-hydrogel composite that addresses these issues. By incorporating interfacial bonding between electrospun poly(ε-caprolactone) fibers and a hyaluronic acid hydrogel network, we generated a composite that mimics the microarchitecture and mechanical properties of soft tissue extracellular matrix. Upon subcutaneous injection in a rat model, this composite permitted infiltration of host macrophages and conditioned them into the pro-regenerative phenotype. By secreting pro-angiogenic cytokines and growth factors, these polarized macrophages enabled gradual remodeling and replacement of the composite with vascularized soft tissue. Such host cell infiltration and angiogenesis were also observed in a rabbit model for repairing a soft tissue defect filled with the composite. This injectable nanofiber-hydrogel composite augments native tissue regenerative responses, thus enabling durable soft tissue restoration outcomes.

The effect of a nanofiber-hydrogel composite on neural tissue repair and regeneration in the contused spinal cord

An injury to the spinal cord causes long-lasting loss of nervous tissue because endogenous nervous tissue repair and regeneration at the site of injury is limited. We engineered an injectable nanofiber-hydrogel composite (NHC) with interfacial bonding to provide mechanical strength and porosity and examined its effect on repair and neural tissue regeneration in an adult rat model of spinal cord contusion. At 28 days after treatment with NHC, the width of the contused spinal cord segment was 2-fold larger than in controls. With NHC treatment, tissue in the injury had a 2-fold higher M2/M1 macrophage ratio, 5-fold higher blood vessel density, 2.6-fold higher immature neuron presence, 2.4-fold higher axon density, and a similar glial scar presence compared with controls. Spared nervous tissue volume in the contused segment and hind limb function was similar between groups. Our findings indicated that NHC provided mechanical support to the contused spinal cord and supported pro-regenerative macrophage polarization, angiogenesis, axon growth, and neurogenesis in the injured tissue without any exogenous factors or cells. These results motivate further optimization of the NHC and delivery protocol to fully translate the potential of the unique properties of the NHC for treating spinal cord injury.

Effects of ginsenoside‑Rg1 on the proliferation and glial‑like directed differentiation of embryonic rat cortical neural stem cells in vitro

Ginsenoside-Rg1, the main active component of Panax notoginseng, exhibits a number of pharmacological functions, including promoting protein synthesis in the brain, increasing the number of synapses, improving memory and promoting recovery of brain function following injury. The effect of ginsenoside-Rg1 on proliferation and glial-like-directed differentiation in the cortical neural stem cells (NSCs) of embryonic rat brain was investigated. The present study used MTS assays to identify the optimum dose and window time of ginsenoside-Rg1 administration to stimulate the proliferation of cortical NSCs in the rat embryonic tissue. The oxygen glucose deprivation (OGD) set-up was used as a cell injury model. Immunofluorescent staining was used for identification of NSCs and subsequent observation of their proliferation and glial-like directed differentiation. Nestin expression was the marker for the presence of NSCs among the cortical cells of embryonic rat brain. The optimum dose of ginsenoside-Rg1 for proliferation of NSCs was 0.32 µg/ml. The optimum window time of 0.32 µg/ml ginsenoside-Rg1 administration on proliferation of NSCs was 6 h. Ginsenoside-Rg1 at 0.32 µg/ml concentration promoted incorporation of bromo-2-deoxyuridine, and expression of nestin and vimentin in primary and passaged NSCs, and NSCs following OGD. Ginsenoside-Rg1 had a role in promoting proliferation and glial-like-directed differentiation of cortical NSCs. The plausible explanation for these responses is that ginsenoside-Rg1 acts similarly to the growth factors to promote the proliferation and differentiation of NSCs.

The scaffold microenvironment for stem cell based bone tissue engineering

Bone tissue engineering uses the principles and methods of engineering and life sciences to study bone structure, function and growth mechanism for the purposes of repairing, maintaining and improving damaged bone tissue.

In vitro bioengineered model of cortical brain tissue

A bioengineered model of 3D brain-like tissue was developed using silk-collagen protein scaffolds seeded with primary cortical neurons. The scaffold design provides compartmentalized control for spatial separation of neuronal cell bodies and neural projections, which resembles the layered structure of the brain (cerebral cortex). Neurons seeded in a donut-shaped porous silk sponge grow robust neuronal projections within a collagen-filled central region, generating 3D neural networks with structural and functional connectivity. The silk scaffold preserves the mechanical stability of the engineered tissues, allowing for ease of handling, long-term culture in vitro and anchoring of the central collagen gel to avoid shrinkage, and enabling neural network maturation. This protocol describes the preparation and manipulation of silk-collagen constructs, including the isolation and seeding of primary rat cortical neurons. This 3D technique is useful for mechanical injury studies and as a drug screening tool, and it could serve as a foundation for brain-related disease models. The protocol of construct assembly takes 2 d, and the resulting tissues can be maintained in culture for several weeks.

Preparation and Characterization of an <i>In Situ</i> Hydrogel of Self-Assembly Type I Collagen from Shark Skin/Methylcellulose for Central Nerve System Regeneration

Central nerve system degeneration is a crucial problem for many patients. To use an in situ hydrogel formation is an attractive method to treat that problem. An in situ hydrogel was developed for central nerve system regeneration. An acid soluble collagen (ASC) and pepsin soluble collagen (PSC) from the shark skin of the brownbanded bamboo shark (Chiloscyllium punctatum) were used to produce hybridized hydrogels by the biomimetic approach. Collagen was mixed with methylcellulose and used 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) as a crosslinker. The hydrogels had various ratios of collagen:methylcellulose: 100:0, 70:30, 50:50, 30:70, and 0:100. Structural, molecular, and morphological organization were characterized and observed by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM). The DSC results showed that the peak of denatured collagen fibril shifted higher in a 30:70 ratio of collagen:methylcellulose in both ASC and PSC. The FT-IR results indicated that the structure of hydrogels from both ASC and PSC were organized into complex structures. The SEM results demonstrated that the collagen fibril networks were formed in both ASC and PSC hydrogels. The results indicated that the samples containing collagen promise to be an in situ hydrogel for central nerve regeneration.

Hyaluronic acid and neural stem cells: implications for biomaterial design

While in the past hyaluronic acid (HA) was considered a passive structural component, research over the past few decades has revealed its diverse and complex biological functions resulting in a major ideological shift. This review describes recent advances in biological interactions of HA with neural stem cells, with a focus on leveraging these interactions to develop advanced biomaterials that aid regeneration of the central nervous system.

Assembly of polyelectrolyte multilayer films on supported lipid bilayers to induce neural stem/progenitor cell differentiation into functional neurons

The key factors affecting the success of neural engineering using neural stem/progenitor cells (NSPCs) are the neuron quantity, the guidance of neurite outgrowth, and the induction of neurons to form functional synapses at synaptic junctions. Herein, a biomimetic material comprising a supported lipid bilayer (SLB) with adsorbed sequential polyelectrolyte multilayer (PEM) films was fabricated to induce NSPCs to form functional neurons without the need for serum and growth factors in a short-term culture. SLBs are suitable artificial substrates for neural engineering due to their structural similarity to synaptic membranes. In addition, PEM film adsorption provides protection for the SLB as well as the ability to vary the surface properties to evaluate the effects of physical and mechanical signals on NSPC differentiation. Our results revealed that NSPCs were inducible on SLB-PEM films consisting of up to eight alternating layers. In addition, the process outgrowth length, the percentage of differentiated neurons, and the synaptic function were regulated by the number of layers and the surface charge of the outermost layer. The average process outgrowth length was greater than 500 μm on SLB-PLL/PLGA (n = 7.5) after only 3 days of culture. Moreover, the quantity and quality of the differentiated neurons were obviously enhanced on the SLB-PEM system compared with those on the PEM-only substrates. These results suggest that the PEM films can induce NSPC adhesion and differentiation and that an SLB base may enhance neuron differentiation and trigger the formation of functional synapses.