Medium Flow Rate Regulates Viability and Barrier Function of Engineered Skin Substitutes in Perfusion Culture

Physiomimetic In Vitro Human Models for Viral Infection in the Liver

Viral hepatitis is a leading cause of liver morbidity and mortality globally. The mechanisms underlying acute infection and clearance, versus the development of chronic infection, are poorly understood. In vitro models of viral hepatitis circumvent the high costs and ethical considerations of animal models, which also translate poorly to studying the human-specific hepatitis viruses. However, significant challenges are associated with modeling long-term infection in vitro. Differentiated hepatocytes are best able to sustain chronic viral hepatitis infection, but standard two-dimensional models are limited because they fail to mimic the architecture and cellular microenvironment of the liver, and cannot maintain a differentiated hepatocyte phenotype over extended periods. Alternatively, physiomimetic models facilitate important interactions between hepatocytes and their microenvironment by incorporating liver-specific environmental factors such as three-dimensional ECM interactions and co-culture with non-parenchymal cells. These physiologically relevant interactions help maintain a functional hepatocyte phenotype that is critical for sustaining viral hepatitis infection. In this review, we provide an overview of distinct, novel, and innovative in vitro liver models and discuss their functionality and relevance in modeling viral hepatitis. These platforms may provide novel insight into mechanisms that regulate viral clearance versus progression to chronic infections that can drive subsequent liver disease.

Physiologically relevant microsystems to study viral infection in the human liver

Viral hepatitis is a leading cause of liver disease and mortality. Infection can occur acutely or chronically, but the mechanisms that govern the clearance of virus or lack thereof are poorly understood and merit further investigation. Though cures for viral hepatitis have been developed, they are expensive, not readily accessible in vulnerable populations and some patients may remain at an increased risk of developing hepatocellular carcinoma (HCC) even after viral clearance. To sustain infection in vitro, hepatocytes must be fully mature and remain in a differentiated state. However, primary hepatocytes rapidly dedifferentiate in conventional 2D in vitro platforms. Physiologically relevant or physiomimetic microsystems, are increasingly popular alternatives to traditional two-dimensional (2D) monocultures for in vitro studies. Physiomimetic systems reconstruct and incorporate elements of the native cellular microenvironment to improve biologic functionality in vitro. Multiple elements contribute to these models including ancillary tissue architecture, cell co-cultures, matrix proteins, chemical gradients and mechanical forces that contribute to increased viability, longevity and physiologic function for the tissue of interest. These microsystems are used in a wide variety of applications to study biological phenomena. Here, we explore the use of physiomimetic microsystems as tools for studying viral hepatitis infection in the liver and how the design of these platforms is tailored for enhanced investigation of the viral lifecycle when compared to conventional 2D cell culture models. Although liver-based physiomimetic microsystems are typically applied in the context of drug studies, the platforms developed for drug discovery purposes offer a solid foundation to support studies on viral hepatitis. Physiomimetic platforms may help prolong hepatocyte functionality in order to sustain chronic viral hepatitis infection in vitro for studying virus-host interactions for prolonged periods.

Numerical modelling of osteocyte growth on different bone tissue scaffolds

The most common solution for the regeneration or replacement of damaged bones is the implantation of prostheses comprising ceramic or metallic materials. However, these implants are known to cause problems such as post-operative infections, collapse of the prosthesis, and lack of osseointegration. Consequently, bone tissue engineering was established because of the limitations of such implants. Osteogenic implants offer promising solutions for bone regeneration; however, three-dimensional scaffolds should be used as supportive structures. It is challenging to correctly design these structures and their compositions or properties to provide a microenvironment that promotes tissue regeneration and expedites bone formation. Computational fluid dynamics can be used to model the main phenomena that occur in bioreactors, such as cell metabolism, nutrient transport, and cell culture growth, or to model the influence of several key mechanisms related to the fluid medium, in particular, the wall shear stress. In this work, a new numerical bone cell growth model was developed, which considered the oxygen and nutrient consumption as well as the wall shear stress effect on cell proliferation. The model was implemented using 35 three-dimensional scaffolds of different porosities, and the effect of the main geometrical parameters involved in each scaffold type was analysed. The porosity plays an important role, however, a similar porosity did not guarantee similar shear stress or cell growth among the scaffolds. Randomised trabecular scaffolds, that more closely resembled trabecular bone, showed the highest cell growth values, so these are the best candidates for cell growth in a bioreactor.

Advances in Skin Tissue Bioengineering and the Challenges of Clinical Translation

Skin tissue bioengineering is an emerging field that brings together interdisciplinary teams to promote successful translation to clinical care. Extensive deep tissue injuries, such as large burns and other major skin loss conditions, are medical indications where bioengineered skin substitutes (that restore both dermal and epidermal tissues) are being studied as alternatives. These may not only reduce mortality but also lessen morbidity to improve quality of life and functional outcome compared with the current standards of care. A common objective of dermal-epidermal therapies is to reduce the time required to accomplish stable closure of wounds with minimal scar in patients with insufficient donor sites for autologous split-thickness skin grafts. However, no commercially-available product has yet fully satisfied this objective. Tissue engineered skin may include cells, biopolymer scaffolds and drugs, and requires regulatory review to demonstrate safety and efficacy. They must be scalable for manufacturing and distribution. The advancement of technology and the introduction of bioreactors and bio-printing for skin tissue engineering may facilitate clinical products' availability. This mini-review elucidates the reasons for the few available commercial skin substitutes. In addition, it provides insights into the challenges faced by surgeons and scientists to develop new therapies and deliver the results of translational research to improve patient care.

Engineering functional microvessels in synthetic polyurethane random-pore scaffolds by harnessing perfusion flow

Recently reported biomaterial-based approaches toward prevascularizing tissue constructs rely on biologically or structurally complex scaffolds that are complicated to manufacture and sterilize, and challenging to customize for clinical applications. In the current work, a prevascularization method for soft tissue engineering that uses a non-patterned and non-biological scaffold is proposed. Human fibroblasts and HUVECs were seeded on an ionomeric polyurethane-based hydrogel and cultured for 14 days under medium perfusion. A flow rate of 0.05 mL/min resulted in a greater lumen density in the constructs relative to 0.005 and 0.5 mL/min, indicating the critical importance of flow magnitude in establishing microvessels. Constructs generated at 0.05 mL/min perfusion flow were implanted in a mouse subcutaneous model and intravital imaging was used to characterize host blood perfusion through the construct after 2 weeks. Engineered microvessels were functional (i.e. perfused with host blood and non-leaky) and neovascularization of the construct by host vessels was enhanced relative to non-prevascularized constructs. We report on the first strategy toward engineering functional microvessels in a tissue construct using non-bioactive, non-patterned synthetic polyurethane materials.

Non-woven bilayered biodegradable chitosan-gelatin-polylactide scaffold for bioengineering of tracheal epithelium

OBJECTIVES

The conversion of tissue engineering into a routine clinical tool cannot be achieved without a deep understanding of the interaction between cells and scaffolds during the process of tissue formation in an artificial environment. Here, we have investigated the cultivation conditions and structural features of the biodegradable non-woven material in order to obtain a well-differentiated human airway epithelium.

MATERIALS AND METHODS

The bilayered scaffold was fabricated by electrospinning technology. The efficiency of the scaffold has been evaluated using MTT cell proliferation assay, histology, immunofluorescence and electron microscopy.

RESULTS

With the use of a copolymer of chitosan-gelatin-poly-l-lactide, a bilayered non-woven scaffold was generated and characterized. The optimal structural parameters of both layers for cell proliferation and differentiation were determined. The basal airway epithelial cells differentiated into ciliary and goblet cells and formed pseudostratified epithelial layer on the surface of the scaffold. In addition, keratinocytes formed a skin equivalent when seeded on the same scaffold. A comparative analysis of growth and differentiation for both types of epithelium was performed.

CONCLUSIONS

The structural parameters of nanofibres should be selected experimentally depending on polymer composition. The major challenges on the way to obtain the well-differentiated equivalent of respiratory epithelium on non-woven scaffold include the following: the balance between scaffold permeability and thickness, proper combination of synthetic and natural components, and culture conditions sufficient for co-culturing of airway epithelial cells and fibroblasts. For generation of skin equivalent, the lack of diffusion is not so critical as for pseudostratified airway epithelium.

Keratinocytes are mechanoresponsive to the microflow-induced shear stress

Here, we have reported that keratinocytes respond to the microflow-induced shear stress both at the collective and individual cell level. Using a microfluidic setup, we categorically showed that low shear stress of magnitude 0.06 dyne/cm² could induce morphological variation and cytoskeletal reorganization in keratinocyte, whereas higher shear stress (6 dyne/cm² ) resulted in cellular disruption. Using a series of blocker molecules specific to different mechanotransducers, we demonstrated the pivotal role of actin network in keratinocyte mechanoresponsiveness in conjugation with myosin and lipid rafts. Flow-induced shear stress also induced significant elevation in E-cadherin and Zonula occludens-1 (ZO-1) expression levels. We further showed that under the influence of shear stress, the extent of colocalization of E-cadherin and ZO-1 was more at the cell-cell junction that indicates an improvement in the epithelial phenotype. An increase in the expression of nuclear lamin was also observed in the sheared cells that suggest the transmission of mechanical signals to the nucleus. It is envisioned that this study may find its application in basic and applied organogenesis of the epidermis.

3D bioprinting of skin tissue: From pre-processing to final product evaluation

Bioprinted skin tissue has the potential for aiding drug screening, formulation development, clinical transplantation, chemical and cosmetic testing, as well as basic research. Limitations of conventional skin tissue engineering approaches have driven the development of biomimetic skin equivalent via 3D bioprinting. A key hope for bioprinting skin is the improved tissue authenticity over conventional skin equivalent construction, enabling the precise localization of multiple cell types and appendages within a construct. The printing of skin faces challenges broadly associated with general 3D bioprinting, including the selection of cell types and biomaterials, and additionally requires in vitro culture formats that allow for growth at an air-liquid interface. This paper provides a thorough review of current 3D bioprinting technologies used to engineer human skin constructs and presents the overall pipelines of designing a biomimetic artificial skin via 3D bioprinting from the design phase (i.e. pre-processing phase) through the tissue maturation phase (i.e. post-processing) and into final product evaluation for drug screening, development, and drug delivery applications.

The effects of constant flow bioreactor cultivation and keratinocyte seeding densities on prevascularized organotypic skin grafts based on a fibrin scaffold

Organotypic full-thickness skin grafts (OTSG) are already an important technology for treating various skin conditions and are well established for skin research and development. These obvious benefits are often impaired by the need of laborious production, their noncomplete autologous composition, and, most importantly, their lack of included vasculature. Therefore, our study focused on combining a prevascularized dermal layer with an epidermis to cultivate full-thickness skin grafts incorporating capillary-like networks. It has been shown that prevascularization accelerates ingrowth of tissue-engineered grafts, and it is a prerequisite to circumvent diffusion limits due to graft thickness. To obtain such a graft, we chose a dermal layer incorporating human umbilical vein endothelial cells (HuVEC) amid human dermal fibroblasts within a fibrin-based scaffold, seeded apically with human foreskin keratinocytes (hfKC). Our research investigated the used concept's feasibility, as well as the effect of hfKC addition on the development of a well-connected capillary-like network after approximately 21 days. In addition, we evaluated the utilization of a custom-made constant flow bioreactor for simplified cultivation of these grafts, therefore possibly easing graft production and presumably increasing their cost effectiveness. Skin grafts were assessed by conventional two-dimensional histology. In addition, software-assisted three-dimensional evaluation of the capillary-like structure networks was performed by two-photon laser scanning microscopy (TPLSM) and subsequent image processing was done with ImagePro(®) Analyzer 7.0 software, thereby evaluating its platform technology power in the field of prevascularized skin grafts. All samples showed a capillary-like structure network, but we could report a significant reduction of its total length after 14 days of tri-culture with 5×10(5)/cm(2) seeded hfKC, possibly indicating nutritional deficiencies for this particular high cell density experimental setup. Lower concentrations of hfKC did not affect the formation of the capillary-like structures significantly. The developed bioreactor simplified cultivation of prevascularized OTSG. However, a flow-dependent reduction of capillary-like structures in 1 and 5 mL/min flow conditions occurred. We conclude that our technique for creating prevascularized OTSG is feasible. In addition, TPLSM is well suited for analyzing the prevascularization process. We hypothesize that the handling benefits of our bioreactor can be preserved by using considerably lower flow rates while not impairing the forming of capillary-like structure networks.

Construction and expression of retroviral vector pLEGFP-N1-TERT in preparation of seed cells for skin tissue engineering

OBJECTIVE

To construct the retroviral vector pLEGFP-N1-telomerase reverse transcriptase (TERT) and to investigate the expression of TERT in neonatal mouse hypodermal cells.

METHODS

The polymerase chain reaction (PCR)-amplified TERT gene was inserted into plasmid pLEGFP-N1. The positive clone was identified by restriction enzyme digestion and sequencing, then was transfected into packaging cells to produce retrovirus particles. Neonatal mouse hypodermal cells were infected with the virus to generate a stable cell line. The TERT mRNA expression level, telomerase activity, and enhanced green fluorescent protein (EGFP) expression level were analyzed.

RESULTS

Retroviral vector pLEGFP-N1-TERT was constructed successfully, and a stable cell line of neonatal mouse hypodermal cells expressing EGFP was established. Western blot and immunohistochemical assay showed that the expression level of TERT was significantly elevated in the neonatal mouse hypodermal cells.

CONCLUSIONS

A high titer of retrovirus pLEGFP-N1-TERT mediates high-level expression of the exogenous TERT gene in the neonatal mouse hypodermal cells. This protocol has potential applications for skin tissue engineering and cell transplantation therapy.

"Take" of a polymer-based autologous cultured composite "skin" on an integrated temporizing dermal matrix: proof of concept

This study aimed to investigate the ability of an autologous cultured composite skin (CCS) to close similar biodegradable temporizing matrix (BTM)-integrated wounds, and its effectiveness in healing fresh full-thickness wounds after the failure of cultured epithelial autograft in its two forms (sheets and suspensions) to epithelialize over an integrated polymer BTM. Using a porcine model, autologous split-skin grafts were harvested three of four dorsal 8 × 8 cm treatment sites. These three sites were subsequently converted to full-thickness wounds and BTMs were implanted. The grafts were used to produce autologous CCSs for each pig. These consisted of a 1 mm thick biodegradable polymer foam scaffold into which fibroblasts and keratinocytes harvested from the grafts were cocultured. At Day 28, on each animal, the autologous CCSs were applied to two of the integrated BTMs, an autologous split-skin graft was applied to the third integrated BTM, and one CCS was applied immediately into a fresh, "naked" (no BTM applied) wound. The CCSs were capable of generating a bilayer repair over the naked wound's fat base and BTM-integrated wounds, which consisted of dermal elements and a keratinized stratified squamous epidermis anchored with a basement membrane by day 7. The CCSs behaved in different ways: either as a delivery vehicle allowing similar development of a bilayer repair while the polymer foam was shed from the wound, or generating a bilayer repair with the foam scaffold being retained (composite "take"). These results conclude our porcine program and provide proof of concept that the integrated BTM can be closed with an autologous CCS. Once fully optimized, this may provide robust repair without resorting to the split-skin graft, important in those cases where unburned donor site is unavailable.

The mouse dorsal skin fold chamber as a means for the analysis of tissue engineered skin

The therapy of extensive and deep burn wounds is still a challenging task for reconstructive plastic surgery. The outcome is generally not satisfactory, neither from the functional nor from the aesthetic aspect. Several available skin substitutes are used but there is need for optimization of new skin substitutes which have to be tested in vitro as well as in vivo. Here, we show that the dorsal skin fold chamber preparation of mice is well suited for the testing of skin substitutes in vivo. Dermal skin constructs consisting of matriderm(®) covered with a collagen type I gel were inserted into full thickness skin wounds in the skin fold chambers. The skin substitutes integrated well into the adjacent skin and got epithelialized from the wound edges within 11 days. The epithelialization by keratinocytes is the prerequisite that also cell-free dermal substitutes might be used in the case of the lack of sufficient areas to gain split thickness skin grafts. Further advantage of the chambers is the lack of wound contraction, which is common but undesired in rodent wound healing. Furthermore, this model allows a sophisticated histological as well as immunohistochemical analysis. As such, we conclude that this model is well suited for the analysis of tissue engineered skin constructs. Besides epithelialization the mode and extend of neovascularization and contraction of artificial grafts may be studied under standardized conditions.

Towards personalized medicine with a three-dimensional micro-scale perfusion-based two-chamber tissue model system

A three-dimensional micro-scale perfusion-based two-chamber (3D-μPTC) tissue model system was developed to test the cytotoxicity of anticancer drugs in conjunction with liver metabolism. Liver cells with different cytochrome P450 (CYP) subtypes and glioblastoma multiforme (GBM) brain cancer cells were cultured in two separate chambers connected in tandem. Both chambers contained a 3D tissue engineering scaffold fabricated with biodegradable poly(lactic acid) (PLA) using a solvent-free approach. We used this model system to test the cytotoxicity of anticancer drugs, including temozolomide (TMZ) and ifosfamide (IFO). With the liver cells, TMZ showed a much lower toxicity to GBM cells under both 2D and 3D cell culture conditions. Comparing 2D, GBM cells cultured in 3D had much high viability under TMZ treatment. IFO was used to test the CYP-related metabolic effects. Cells with different expression levels of CYP3A4 differed dramatically in their ability to activate IFO, which led to strong metabolism-dependent cytotoxicity to GBM cells. These results demonstrate that our 3D-μPTC system could provide a more physiologically realistic in vitro environment than the current 2D monolayers for testing metabolism-dependent toxicity of anticancer drugs. It could therefore be used as an important platform for better prediction of drug dosing and schedule towards personalized medicine.

Novel strategies to engineering biological tissue in vitro

Tissue engineering creates biological tissues that aim to improve the function of diseased or damaged tissues. In this chapter, we examine the promise and shortcomings of "top-down" and "bottom-up" approaches for creating engineered biological tissues. In top-down approaches, the cells are expected to populate the scaffold and create the appropriate extracellular matrix and microarchitecture often with the aid of a bioreactor that furnish the set of stimuli required for an optimal cellular viability. Specifically, we survey the role of cell material interaction on oxygen metabolism in three-dimensional (3D) in vitro cultures as well as the time and space evolution of the transport and biophysical properties during the development of de novo synthesized tissue-engineered constructs. We show how to monitor and control the evolution of these parameters that is of crucial importance to process biohybrid constructs in vitro as well as to elaborate reliable mathematical model to forecast tissue growth under specific culture conditions. Furthermore, novel strategies such as bottom-up approaches to build tissue constructs in vitro are examined. In this fashion, tissue building blocks with specific microarchitectural features are used as modular units to engineer biological tissues from the bottom up. In particular, the attention will be focused on the use of cell seeded microbeads as functional building blocks to realize 3D complex tissue. Finally, a challenge will be the potential integration of bottom-up techniques with more traditional top-down approaches to create more complex tissues than are currently achievable using either technique alone by optimizing the advantages of each technique.

Epidermal differentiation governs engineered skin biomechanics

Engineered skin must be mechanically strong to facilitate surgical application and prevent damage during the early stages of engraftment. However, the evolution of structural properties during culture, the relative contributions of the epidermis and dermis, and any correlation with tissue morphogenesis are not well known. These aspects are investigated by assessing the mechanical properties of engineered skin (ES) and engineered dermis (ED) during a 21-day culture period, including correlations with cellular metabolism, cellular organization and epidermal differentiation. During culture, the epidermis differentiates and begins to cornify, as evidenced by immunostaining and surface electrical capacitance. Tensile testing reveals that the ultimate tensile strength and linear stiffness increase linearly with time for ES, but are relatively unchanged for ED. ES strength correlates significantly with epidermal differentiation (p < 0.001) and a composite strength model indicates that strength is largely determined by the epidermis. These data suggest that strategies to improve ES biomechanics should target the dermis. Additionally, time-dependant changes in average ES strength and percent elongation can be used to set upper bound limits on mechanical stimulation profiles to avoid tissue damage.

Tissue-engineered skin substitutes in regenerative medicine

Recent advance in cellular tissue-engineered skin constructs have refined the applications already commercially available, in particular, by the use of genetically modified cells to enhance their properties on the treatment of wounds and to ease the application of epidermis using sprayed keratinocytes. This approach lends itself to use of chimeric epidermis, cultured allogeneic cells, to provide short-term coverage, together with minimally cultured autologous cells for long-term repair. Experimental models of skin include pathological conditions, phenomena such as aging and organogenesis, as in the hair follicle grown from isolated cells in vitro. The recent development of induced pluripotent stem cells raises the possibility of realizing the dream of skin and even limb regeneration shown by animals such as the salamander.