Review: Mineralization of Synthetic Polymer Scaffolds for Bone Tissue Engineering

Bone scaffolds-based localized drugs delivery for osteosarcoma: current status and future perspective

A common malignant bone neoplasm in teenagers is Osteosarcoma. Chemotherapy, surgical therapy, and radiation therapy together comprise the usual clinical course of treatment for Osteosarcoma. While Osteosarcoma and other bone tumors are typically treated surgically, however, surgical resection frequently fails to completely eradicate tumors, and in turn becomes the primary reason for postoperative recurrence and metastasis, ultimately leading to a high rate of mortality. Patients still require radiation and/or chemotherapy after surgery to stop the spread of the tumor and its metastases, and both treatments have an adverse influence on the body's organ systems. In the postoperative management of osteosarcoma, bone scaffolds can load cargos (growth factors or drugs) and function as drug delivery systems (DDSs). This review describes the different kinds of bone scaffolds that are currently available and highlights key studies that use scaffolds as DDSs for the treatment of osteosarcomas. The discussion also includes difficulties and perspectives regarding the use of scaffold-based DDSs. The study may serve as a source for outlining efficient and secure postoperative osteosarcoma treatment plans.

Advances in Tissue Engineering and Its Future in Regenerative Medicine Compared to Traditional Reconstructive Techniques: A Comparative Analysis

Tissue engineering represents a revolutionary approach in regenerative medicine, offering promising alternatives to traditional reconstructive techniques. This systematic review explores recent advances in tissue engineering, comparing their efficacy, postoperative outcomes, and patient satisfaction to conventional methods. A comprehensive literature search was conducted across PubMed, Cochrane Library, and Google Scholar, covering studies published from 2000 to 2024. Fourteen studies were selected for final analysis based on inclusion criteria focusing on outcomes such as scar quality, postoperative pain, and patient satisfaction. The review demonstrated that tissue engineering techniques consistently provided superior cosmetic outcomes with minimal scarring compared to traditional methods. Patients undergoing tissue-engineered procedures experienced mild-to-moderate postoperative pain with rapid resolution, whereas traditional techniques resulted in moderate to severe pain requiring extended management. Furthermore, patients treated with tissue engineering reported high satisfaction rates due to improved cosmetic and functional outcomes. Despite challenges such as ensuring adequate vascularization, controlling scaffold degradation, and overcoming regulatory and cost barriers, ongoing research and development are essential to fully realize the potential of these innovative therapies. Tissue engineering offers significant advantages over traditional reconstructive techniques and has the potential to profoundly improve patient care in regenerative medicine.

Preparation of composite calcium phosphate cement scaffold loaded with Hedysarum polysaccharides and its efficacy in repairing bone defects

It's imperative to create a more ideal biological scaffold for bone defect repair. Calcium phosphate bone cements (CPC) could be used as a scaffold. Some ingredients and osteogenic factors could be added to improve its poor mechanical properties and biological activity. As a macromolecule extracted from traditional Chinese medicine, Hedysarum polysaccharides (HPS) would significantly promote the osteogenic activity of bone biomaterials. Zirconium oxide and starch were added to the solid phase and citric acid was added to the liquid phase to optimize CPC. HPS was loaded onto the scaffold as an osteogenic factor, and the prepared CPS + HPS was characterized. Further, the cytocompatibility of CPS + HPS was assessed according to activity, differentiation, and calcification in neonatal rat calvarial osteoblasts, and the biosafety of CPS + HPS was evaluated according to acute toxicity, pyrogen, sensitization, and hemolysis. The success of CPS + HPS in repairing bone defects was evaluated by using a rabbit femur implantation experiment. After optimization, CPS-20-CA-5 containing 10% starch and 5% citric acid displayed the highest mechanical strength of 28.96 ± 0.03 MPa. HPS-50 was demonstrated to exert the best osteogenic effect. The combination of CPS + HPS achieved HPS-loaded CPC. Material characterization, cytocompatibility, biosafety, and femoral implantation experiments indicated that CPS + HPS possessed better pressure resistance and improved osteogenic ability in bone defect repair.CPS + HPS demonstrated effective pressure resistance and superior osteogenic ability, which may be of great significance for bone defects and bone tissue engineering to promote bone regeneration and repair.

Emerging 2D Nanomaterials-Integrated Hydrogels: Advancements in Designing Theragenerative Materials for Bone Regeneration and Disease Therapy

This review highlights recent advancements in the synthesis, processing, properties, and applications of 2D-material integrated hydrogels, with a focus on their performance in bone-related applications. Various synthesis methods and types of 2D nanomaterials, including graphene, graphene oxide, transition metal dichalcogenides, black phosphorus, and MXene are discussed, along with strategies for their incorporation into hydrogel matrices. These composite hydrogels exhibit tunable mechanical properties, high surface area, strong near-infrared (NIR) photon absorption and controlled release capabilities, making them suitable for a range of regeneration and therapeutic applications. In cancer therapy, 2D-material-based hydrogels show promise for photothermal and photodynamic therapies, and drug delivery (chemotherapy). The photothermal properties of these materials enable selective tumor ablation upon NIR irradiation, while their high drug-loading capacity facilitates targeted and controlled release of chemotherapeutic agents. Additionally, 2D-materials -infused hydrogels exhibit potent antibacterial activity, making them effective against multidrug-resistant infections and disruption of biofilm generated on implant surface. Moreover, their synergistic therapy approach combines multiple treatment modalities such as photothermal, chemo, and immunotherapy to enhance therapeutic outcomes. In bio-imaging, these materials serve as versatile contrast agents and imaging probes, enabling their real-time monitoring during tumor imaging. Furthermore, in bone regeneration, most 2D-materials incorporated hydrogels promote osteogenesis and tissue regeneration, offering potential solutions for bone defects repair. Overall, the integration of 2D materials into hydrogels presents a promising platform for developing multifunctional theragenerative biomaterials.

Progress in synthesis, modification, characterization and applications of hyperbranched polyphosphate polyesters

Hyperbranched polyphosphate polyesters (HPPs) as a special class of hyperbranched polymers have attracted increased interest and have been intensively studied, because of peculiar structures, excellent biocompatibility, flexibility in physicochemical properties, biodegradability, water soluble, thermal stability, and mechanical properties. HPPs can be divided into phosphates as monomers and phosphates as end groups. In this article, the classification, general synthesis, modifications, and applications of HPP are reviewed. In addition, recent developments in the application of HPP are described, such as modified or functionalized by end capping and hypergrafting to improve the performances in polymer blends, coatings, flame retardant, leather. Furthermore, the modifications and application of HPPs in biomedical materials, such as drug delivery and bone regeneration were discussed. In summary, the hyperbranched polymer enlarges its application range and improves its application performance compared with conventional polymer. In the future, more new HPPs composite materials will be developed through hyperbranched technique. This review of HPPs will provide useful theoretical basis and technical support for the development of new hyperbranched polymer material.

Metal-doped carbon dots for biomedical applications: From design to implementation

Carbon dots (CDs), as a new kind of fluorescent nanomaterials, show great potential for application in several fields due to their unique nano-size effect, easy surface functionalization, controllable photoluminescence, and excellent biocompatibility. Conventional preparation methods for CDs typically involve top-down and bottom-up approaches. Doping is a major step forward in CDs design methodology. Chemical doping includes both non-metal and metal doping, in which non-metal doping is an effective strategy for modulating the fluorescence properties of CDs and improving photocatalytic performance in several areas. In recent years, Metal-doped CDs have aroused the interest of academics as a promising nano-doping technique. This approach has led to improvements in the physicochemical and optical properties of CDs by altering their electron density distribution and bandgap capacity. Additionally, the issues of metal toxicity and utilization have been addressed to a large extent. In this review, we categorize metals into two major groups: transition group metals and rare-earth group metals, and an overview of recent advances in biomedical applications of these two categories, respectively. Meanwhile, the prospects and the challenges of metal-doped CDs for biomedical applications are reviewed and concluded. The aim of this paper is to break through the existing deficiencies of metal-doped CDs and fully exploit their potential. I believe that this review will broaden the insight into the synthesis and biomedical applications of metal-doped CDs.

Physicochemical Properties and Simulation of Magnesium/Zinc Binary-Substituted Hydroxyapatite with Enhanced Biocompatibility and Antibacterial Ability

Ionic substitution can effectively activate the surface of hydroxyapatite (HA) for bone repair and regeneration processes. Therefore in this study, magnesium (Mg)-, zinc (Zn)-, and Mg/Zn-codoped HA was prepared by a hydrothermal method. The results of experimental and first-principles calculations verify the existence of Mg and Zn ions in the HA structure by altering cell parameters, crystallinity, and particle size. The results also showed that Mg and Zn are actively accommodated at the Ca(1) and Ca(2) positions, which not only inhibit HA formation but also promote calcium-deficient HA, and when the codoping content increased to 10%Mg and 10%Zn, the HA transformed completely to the whitlockite phase. Furthermore, the impact of codoping on biocompatibility was examined by employing MC3T3 cells. The in vitro study revealed that 5%Mg and 5%Zn single and -codoped HA promoted the proliferation of MC3T3 cells and 5%Mg-doped and -codoped HA stimulated MC3T3 cell differentiation, while 5%Zn-doped and -codoped HA revealed worthy antibacterial properties. Overall, the obtained results demonstrate that cosubstituted HA (5%Mg and 5%Zn) is promising, which not only eradicates bacteria (Escherichia coli and Staphylococcus aureus) but also induces bone regeneration. These findings suggest that 5%Mg and 5%Zn binary-substituted HA is a very promising biomaterial for hard tissue scaffolds and bone repair.

Mineralized Collagen/Polylactic Acid Composite Scaffolds for Load-Bearing Bone Regeneration in a Developmental Model

Repairing load-bearing bone defects in children remains a big clinical challenge. Mineralized collagen (MC) can effectively simulate natural bone composition and hierarchical structure and has a good biocompatibility and bone conductivity. Polylactic acid (PLA) is regarded as a gold material because of its mechanical properties and degradability. In this study, we prepare MC/PLA composite scaffolds via in situ mineralization and freeze-drying. Cell, characterization, and animal experiments compare and evaluate the biomimetic properties and repair effects of the MC/PLA scaffolds. Phalloidin and DAPI staining results show that the MC/PLA scaffolds are not cytotoxic. CCK-8 and scratch experiments prove that the scaffolds are superior to MC and hydroxyapatite (HA)/PLA scaffolds in promoting cell proliferation and migration. The surface and interior of the MC/PLA scaffolds exhibit rich interconnected pore structures with a porosity of ≥70%. The XRD patterns are typical HA waveforms. X-ray, micro-CT, and H&E staining reveal that the defect boundary disappears, new bone tissue grows into MC/PLA scaffolds in a large area, and the scaffolds are degraded after six months of implantation. The MC/PLA composite scaffold has a pore structure and composition similar to cancellous bone, with a good biocompatibility and bone regeneration ability.

Guar-Based Injectable Hydrogel for Drug Delivery and In Vitro Bone Cell Growth

Injectable hydrogels offer numerous advantages in various areas, which include tissue engineering and drug delivery because of their unique properties such as tunability, excellent carrier properties, and biocompatibility. These hydrogels can be administered with minimal invasiveness. In this study, we synthesized an injectable hydrogel by rehydrating lyophilized mixtures of guar adamantane (Guar-ADI) and poly-β-cyclodextrin (p-βCD) in a solution of phosphate-buffered saline (PBS) maintained at pH 7.4. The hydrogel was formed via host-guest interaction between modified guar (Guar-ADI), obtained by reacting guar gum with 1-adamantyl isocyanate (ADI) and p-βCD. Comprehensive characterization of all synthesized materials, including the hydrogel, was performed using nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and rheology. The in vitro drug release study demonstrated the hydrogel's efficacy in controlled drug delivery, exemplified by the release of bovine serum albumin (BSA) and anastrozole, both of which followed first-order kinetics. Furthermore, the hydrogel displayed excellent biocompatibility and served as an ideal scaffold for promoting the growth of mouse osteoblastic MC3T3 cells as evidenced by the in vitro biocompatibility study.

Structural Mechanical Properties of 3D Printing Biomimetic Bone Replacement Materials

One of the primary challenges in developing bone substitutes is to create scaffolds with mechanical properties that closely mimic those of regenerated tissue. Scaffolds that mimic the structure of natural cancellous bone are believed to have better environmental adaptability. In this study, we used the porosity and thickness of pig cancellous bone as biomimetic design parameters, and porosity and structural shape as differential indicators, to design a biomimetic bone beam scaffold. The mechanical properties of the designed bone beam model were tested using the finite element method (FEM). PCL/β-TCP porous scaffolds were prepared using the FDM method, and their mechanical properties were tested. The FEM simulation results were compared and validated, and the effects of porosity and pore shape on the mechanical properties were analyzed. The results of this study indicate that the PCL/β-TCP scaffold, prepared using FDM 3D printing technology for cancellous bone tissue engineering, has excellent integrity and stability. Predicting the structural stability using FEM is effective. The triangle pore structure has the most stability in both simulations and tests, followed by the rectangle and honeycomb shapes, and the diamond structure has the worst stability. Therefore, adjusting the porosity and pore shape can change the mechanical properties of the composite scaffold to meet the mechanical requirements of customized tissue engineering.

Osteoregenerative Potential of 3D-Printed Poly ε-Caprolactone Tissue Scaffolds In Vitro Using Minimally Manipulative Expansion of Primary Human Bone Marrow Stem Cells

The repair of orthopedic and maxillofacial defects in modern medicine currently relies heavily on the use of autograft, allograft, void fillers, or other structural material composites. This study examines the in vitro osteo regenerative potential of polycaprolactone (PCL) tissue scaffolding, fabricated via a three-dimensional (3D) additive manufacturing technology, i.e., a pneumatic micro extrusion (PME) process. The objectives of this study were: (i) To examine the innate osteoinductive and osteoconductive potential of 3D-printed PCL tissue scaffolding and (ii) To perform a direct in vitro comparison of 3D-printed PCL scaffolding with allograft Allowash® cancellous bone cubes with regards to cell-scaffold interactions and biocompatibility with three primary human bone marrow (hBM) stem cell lines. This study specifically examined cell survival, cell integration, intra-scaffold cell proliferation, and differentiation of progenitor cells to investigate the potential of 3D-printed PCL scaffolds as an alternative to allograft bone material for the repair of orthopedic injuries. We found that mechanically robust PCL bone scaffolds can be fabricated via the PME process and the resulting material did not elicit detectable cytotoxicity. When the widely used osteogenic model SAOS-2 was cultured in PCL extract medium, no detectable effect was observed on cell viability or proliferation with multiple test groups showing viability ranges of 92.2% to 100% relative to a control group with a standard deviation of ±10%. In addition, we found that the honeycomb infill pattern of the 3D-printed PCL scaffold allowed for superior mesenchymal stem-cell integration, proliferation, and biomass increase. When healthy and active primary hBM cell lines, having documented in vitro growth rates with doubling times of 23.9, 24.67, and 30.94 h, were cultured directly into 3D-printed PCL scaffolds, impressive biomass increase values were observed. It was found that the PCL scaffolding material allowed for biomass increase values of 17.17%, 17.14%, and 18.18%, compared to values of 4.29% for allograph material cultured under identical parameters. It was also found that the honeycomb scaffold infill pattern was superior to the cubic and rectangular matrix structures, and provided a superior microenvironment for osteogenic and hematopoietic progenitor cell activity and auto-differentiation of primary hBM stem cells. Histological and immunohistochemical studies performed in this work confirmed the regenerative potential of PCL matrices in the orthopedic setting by displaying the integration, self-organization, and auto-differentiation of hBM progenitor cells within the matrix. Differentiation products including mineralization, self-organizing "proto-osteon" structures, and in vitro erythropoiesis were observed in conjunction with the documented expression of expected bone marrow differentiative markers including CD-99 (>70%), CD-71 (>60%), and CD-61 (>5%). All of the studies were conducted without the addition of any exogenous chemical or hormonal stimulation and exclusively utilized the abiotic and inert material polycaprolactone; setting this work apart from the vast majority of contemporary investigations into synthetic bone scaffold fabrication In summary, this study demonstrates the unique clinical potential of 3D-printed PCL scaffolds for stem cell expansion and incorporation into advanced microstructures created via PME manufacturing to generate a physiologically inert temporary bony defect graft with significant autograft features for enhanced end-stage healing.

Robust and Scalable In Vitro Surface Mineralization of Inert Polymers with a Rationally Designed Molecular Bridge

The artificial integration of inorganic materials onto polymers to create the analogues of natural biocomposites is an attractive field in materials science. However, due to significant diversity in the interfacial properties of two kinds of materials, advanced synthesis methods are quite complicated and the resultant materials are always vulnerable to external environments, which limits their application scenarios and makes them unsuitable for scalable production. Herein, we report a simple and universal approach to achieve robust and scalable surface mineralization of polymers using a rationally designed triple functional molecular bridge of fluorosilane, 3-[(perfluorohexyl sulfonyl) amino] propyltriethoxy silane (PFSS). In a two-step solution deposition, the fluoroalkyl and siloxane of the PFSS take charge of its adhesion and immobilization onto polymers by hydrophobic interaction and wrapping-like chemical cross-linking, and then the assembly and growth of inorganic nanoclusters for integration are achieved by strong chemical coordination of PFSS sulfonamide. The versatile mineralization of inorganic oxides (e.g., TiO₂, SiO₂, and Fe₂O₃) onto chemically inert polymer surfaces was realized very well. The resultant mineralized materials exhibit robust and multiple functionalities for hostile applications, such as hydrophilic membranes for removing oils in strong acidic and alkaline wastewaters, fabrics with advanced anti-bacteria for healthy wearing, and plates with strong mechanical performance for better use. Experimental results and theoretical calculations confirmed the homogenous distribution of the PFSS onto polymers via cross-linking for robust coordination with inorganic oxides. These results demonstrate a skillful enlightenment in the design of high-performance mineralized polymer materials used as membranes, fabrics, and medical devices.

Therapeutic application of hydrogels for bone-related diseases

Bone-related diseases caused by trauma, infection, and aging affect people’s health and quality of life. The prevalence of bone-related diseases has been increasing yearly in recent years. Mild bone diseases can still be treated with conservative drugs and can be cured confidently. However, serious bone injuries caused by large-scale trauma, fractures, bone tumors, and other diseases are challenging to heal on their own. Open surgery must be used for intervention. The treatment method also faces the problems of a long cycle, high cost, and serious side effects. Studies have found that hydrogels have attracted much attention due to their good biocompatibility and biodegradability and show great potential in treating bone-related diseases. This paper mainly introduces the properties and preparation methods of hydrogels, reviews the application of hydrogels in bone-related diseases (including bone defects, bone fracture, cartilage injuries, and osteosarcoma) in recent years. We also put forward suggestions according to the current development status, pointing out a new direction for developing high-performance hydrogels more suitable for bone-related diseases.

New Progress in Improving the Delivery Methods of Bisphosphonates in the Treatment of Bone Tumors

Bone tumors are tumors that occur in the bone or its accessory tissues, including primary tumors and metastatic tumors. The main mechanism of bisphosphonate is to inhibit the resorption of destructive bone, inhibit the activity of osteoclasts and reduce the concentration of blood calcium. Therefore, bisphosphonates can be used for malignant hypercalcaemia, pain caused by osteolytic bone metastasis, prevention of osteolytic bone metastasis, multiple myeloma osteopathy, improving radiosensitivity and so on. However, the traditional administration of bisphosphonates can cause a series of adverse reactions. To overcome this disadvantage, it is necessary to develop novel methods to improve the delivery of bisphosphonates. In this paper, the latest research progress of new and improved bisphosphonate drug delivery methods in the treatment of bone tumors is reviewed. At present, the main design idea is to connect bisphosphonate nanoparticles, liposomes, microspheres, microcapsules, couplings, prodrugs and bone tissue engineering to targeted anti-tumors systems, and positive progress has been made in in vitro and animal experiments. However, its safety and effectiveness in human body still need to be verified by more studies.

Hydrogels and Their Role in Bone Tissue Engineering: An Overview

An increasing incidence of the bone damage either due to trauma or a wide range of diseases related to bone necessitates the advent of new technologies or modification of the existing pattern of treatment to deliver utmost care to an individual thereby helping them to lead a normal and healthy life. Revolutionary changes in the field of tissue engineering (TE) pave a way from repair to regeneration of human tissues and restoring the health of an individual. Among the numerous biomaterials available, hydrogel emerges as a promising source of scaffold material in the field of bone TE (BTE). This article presents an overview on hydrogels and their role in BTE.

Composite Scaffolds from Gelatin and Bone Meal Powder for Tissue Engineering

Bone tissue engineering offers versatile solutions to broaden clinical options for treating skeletal injuries. However, the variety of robust bone implants and substitutes remains largely uninvestigated. The advancements in hydrogel scaffolds composed of natural polymeric materials and osteoinductive microparticles have shown to be promising solutions in this field. In this study, gelatin methacrylate (GelMA) hydrogels containing bone meal powder (BP) particles were investigated for their osteoinductive capacity. As natural source of the bone mineral, we expect that BP improves the scaffold's ability to induce mineralization. We characterized the physical properties of GelMA hydrogels containing various BP concentrations (0, 0.5, 5, and 50 mg/mL). The in vitro cellular studies revealed enhanced mechanical performance and the potential to promote the differentiation of pre-osteoblast cells. The in vivo studies demonstrated both promising biocompatibility and biodegradation properties. Overall, the biological and physical properties of this biomaterial is tunable based on BP concentration in GelMA scaffolds. The findings of this study offer a new composite scaffold for bone tissue engineering.

The role of natural polymers in bone tissue engineering

Bone is a dynamic self-healing organ and a continuous remodeling ensures the restoration of the bone structure and function over time. However, bone remodeling is not able to repair large traumatic injuries. Therefore, surgical interventions and bone substitutes are required. The aim of bone tissue engineering is to repair and regenerate tissues and engineered a bone graft as a bone substitute. To met this goal, several natural or synthetic polymers have been used to develop a biocompatible and biodegradable polymeric construct. Among the polymers, natural polymers have higher biocompatibility, excellent biodegradability, and no toxicity. So far, collagen, chitosan, gelatin, silk fibroin, alginate, cellulose, and starch, alone or in combination, have been widely used in bone tissue engineering. These polymers have been used as scaffolds, hydrogels, and micro-nanospheres. The functionalization of the polymer with growth factors and bioactive glasses increases the potential use of polymers for bone regeneration. As bone is a dynamic highly vascularized tissue, the vascularization of the polymeric scaffolds is vital for successful bone regeneration. Several in vivo and in vitro strategies have been used to vascularize the polymeric scaffolds. In this review, the application of the most commonly used natural polymers is discussed.

Additive Manufacturing of Biopolymers for Tissue Engineering and Regenerative Medicine: An Overview, Potential Applications, Advancements, and Trends

As a technique of producing fabric engineering scaffolds, three-dimensional (3D) printing has tremendous possibilities. 3D printing applications are restricted to a wide range of biomaterials in the field of regenerative medicine and tissue engineering. Due to their biocompatibility, bioactiveness, and biodegradability, biopolymers such as collagen, alginate, silk fibroin, chitosan, alginate, cellulose, and starch are used in a variety of fields, including the food, biomedical, regeneration, agriculture, packaging, and pharmaceutical industries. The benefits of producing 3D-printed scaffolds are many, including the capacity to produce complicated geometries, porosity, and multicell coculture and to take growth factors into account. In particular, the additional production of biopolymers offers new options to produce 3D structures and materials with specialised patterns and properties. In the realm of tissue engineering and regenerative medicine (TERM), important progress has been accomplished; now, several state-of-the-art techniques are used to produce porous scaffolds for organ or tissue regeneration to be suited for tissue technology. Natural biopolymeric materials are often better suited for designing and manufacturing healing equipment than temporary implants and tissue regeneration materials owing to its appropriate properties and biocompatibility. The review focuses on the additive manufacturing of biopolymers with significant changes, advancements, trends, and developments in regenerative medicine and tissue engineering with potential applications.

Chitin-hydroxyapatite-collagen composite scaffolds for bone regeneration

Bone defect is usually difficult to recover quickly, and bone scaffold transplantation is considered to be an effective method. Biomaterials have a wide range of application prospects in bone tissue repair, and the two key problems are the selection of materials and cells. The object of this study was to discuss the structural characteristics of bone scaffold materials and their effects on bone repair in vivo. The chitin-hydroxyapatite (HAP)-collagen composite scaffolds (CHCS) was prepared with epichlorohydrin (ECH) as crosslinking agent. The structure was characterized and the compressive strength, porosity, water absorbency and stability were investigated. The biocompatibility and osteogenic differentiation of CHCS in vitro were detected, and the effect of defect repair in vivo was evaluated. The results suggested that HAP not only enhanced the compressive strength of CHCS, but also promoted the formation of calcium nodules due to its bone conductivity. Histological staining showed that collagen promoted collagen deposition and new bone formation. X-ray images also indicated that CHCS transplantation accelerated bone repair. Therefore, CHCs has immense potential in bone regeneration.

2D phosphorene nanosheets, quantum dots, nanoribbons: synthesis and biomedical applications

Phosphorene, also known as black phosphorus (BP), is a two-dimensional (2D) material that has gained significant attention in several areas of current research. Its unique properties such as outstanding surface activity, an adjustable bandgap width, favorable on/off current ratios, infrared-light responsiveness, good biocompatibility, and fast biodegradation differentiate this material from other two-dimensional materials. The application of BP in the biomedical field has been rapidly emerging over the past few years. This article aimed to provide a comprehensive review of the recent progress on the unique properties and extensive medical applications for BP in bone, nerve, skin, kidney, cancer, and biosensing related treatment. The details of applications of BP in these fields were summarized and discussed.

In-vivo Investigations of Hydroxyapatite/Co-polymeric Composites Coated Titanium Plate for Bone Regeneration

A perfect mimic of human bone is very difficult. Still, the latest advancement in biomaterials makes it possible to design composite materials with morphologies merely the same as that of bone tissues. In the present work is the fabrication of selenium substituted Hydroxyapatite (HAP-Se) covered by lactic acid (LA)-Polyethylene glycol (PEG)-Aspartic acid (AS) composite with the loading of vincristine sulfate (VCR) drug (HAP-Se/LA-PEG-AS/VCR) for twin purposes of bone regenerations. The HAP-Se/LA-PEG-AS/VCR composite coated on titanium implant through electrophoretic deposition (EPD). The prepared composite characterized using FTIR, XRD techniques to rely on the composites' chemical nature and crystalline status. The morphology of the composite and the titanium plate with the composite coating was investigated by utilizing SEM, TEM instrument techniques, and it reveals the composite has porous morphology. The drug (VCR) load in HAP-Se/LA-PEG-AS and releasing nature were investigated through UV-Visible spectroscopy at the wavelength of 295 nm. In vitro study of SBF treatment shows excellent biocompatibility to form the HAP crystals. The viability against MG63 and toxicity against Saos- 2 cells have expressed the more exceptional biocompatibility in bone cells and toxicity with the cancer cells of prepared composites. The in-vivo study emphasizes prepared biomaterial suitable for implantation and helps accelerate bone regeneration on osteoporosis and osteosarcoma affected hard tissue.

Silk-Based Materials for Hard Tissue Engineering

Hard tissues, e.g., bone, are mechanically stiff and, most typically, mineralized. To design scaffolds for hard tissue regeneration, mechanical, physico-chemical and biological cues must align with those found in the natural tissue. Combining these aspects poses challenges for material and construct design. Silk-based materials are promising for bone tissue regeneration as they fulfill several of such necessary requirements, and they are non-toxic and biodegradable. They can be processed into a variety of morphologies such as hydrogels, particles and fibers and can be mineralized. Therefore, silk-based materials are versatile candidates for biomedical applications in the field of hard tissue engineering. This review summarizes silk-based approaches for mineralized tissue replacements, and how to find the balance between sufficient material stiffness upon mineralization and cell survival upon attachment as well as nutrient supply.

Recent Developments of Biomaterials for Additive Manufacturing of Bone Scaffolds

Recent years have witnessed surging demand for bone repair/regeneration implants due to the increasing number of bone defects caused by trauma, cancer, infection, and arthritis worldwide. In addition to bone autografts and allografts, biomaterial substitutes have been widely used in clinical practice. Personalized implants with precise and personalized control of shape, porosity, composition, surface chemistry, and mechanical properties will greatly facilitate the regeneration of bone tissue and satiate the clinical needs. Additive manufacturing (AM) techniques, also known as 3D printing, are drawing fast growing attention in the fabrication of implants or scaffolding materials due to their capability of manufacturing complex and irregularly shaped scaffolds in repairing bone defects in clinical practice. This review aims to provide a comprehensive overview of recent progress in the development of materials and techniques used in the additive manufacturing of bone scaffolds. In addition, clinical application, pre-clinical trials and future prospects of AM based bone implants are also summarized and discussed.

An injectable and antibacterial calcium phosphate scaffold inhibiting Staphylococcus aureus and supporting stem cells for bone regeneration

Staphylococcus aureus (S. aureus) is the major pathogen for osteomyelitis, which can lead to bone necrosis and destruction. There has been no report on antibacterial calcium phosphate cement (CPC) against S. aureus. The aims of this study were to: (1) develop novel antibacterial CPC-chitosan-alginate microbead scaffold; (2) investigate mechanical and antibacterial properties of CPC-chitosan-penicillin-alginate scaffold; (3) evaluate the encapsulation and delivery of human umbilical cord mesenchymal stem cells (hUCMSCs). Flexural strength, elastic modulus and work-of-fracture of the CPC-chitosan-penicillin-alginate microbeads scaffold and CPC-chitosan scaffold were evaluated. Penicillin release profile and antibacterial effects on S. aureus were determined. The hUCMSC delivery and release from penicillin-alginate microbeads were investigated. Injectable CPC-chitosan-penicillin-alginate microbeads scaffold was developed for the first time. CPC-chitosan-penicillin-alginate microbeads scaffold had a flexural strength of 3.16 ± 0.55 MPa, matching that of cancellous bone. With sustained penicillin release, the new scaffold had strong antibacterial effects on S. aureus, with an inhibition zone diameter of 32.2 ± 2.5 mm, greater than that of penicillin disk control (15.1 ± 2.0 mm) (p < 0.05). Furthermore, this injectable and antibacterial scaffold had no toxic effects, yielding excellent hUCMSC viability, which was similar to that of CPC control without antibacterial activity (p > 0.05). CPC-chitosan-penicillin-microbeads scaffold had injectability, good strength, strong antibacterial effects, and good biocompatibility to support stem cell viability for osteogenesis. CPC-chitosan-penicillin-microbeads scaffold is promising for dental, craniofacial and orthopedic applications to combat infections and promote bone regeneration.

A silk-based high impact composite for the core decompression of the femoral head

Core decompression of the femoral head is a recommended head-conserving strategy for early-stage osteonecrosis of the femoral head. However, no ideal filling material has been found so far. In this study, we fabricated a "solid core-porous coating" composite scaffold, which is a silk fibroin/hydroxypropyl methylcellulose (SF/HPMC) scaffold, by a "two-step" process. The solid core scaffold possesses a sufficient compression modulus (860 MPa) for support, while the porous coating scaffold with controllable pore size and porosity provides a suitable microenvironment for the osteoblast cell to adhere and proliferate. Moreover, the porous coating scaffold was mineralized by adding different contents of hydroxyapatite crystal to further enhance its osteoinductivity, according to the simulated body fluid (SBF) biomineralization assay. To demonstrate the biocompatibility and osteoinductivity of such composite scaffolds, a series of in vitro experiments were performed, indicating the MC3T3-E1 pre-osteoblast cells grew and differentiated well on the mineralized porous coating scaffolds. The mechanical testing results also proved that the mechanical property of the solid core scaffold varied (230-1600 MPa) with different solid contents of SF/HPMC, as expected. Furthermore, the rabbit femoral head core decompression model was adopted and confirmed the excellent mechanical performance of the solid core scaffolds, as well as the satisfied osteoinductivity of the porous coating scaffold, by inserting the composite scaffolds into the bone tunnel in vivo. All of the preliminary results implied that the novel biodegradable composite scaffold has an outstanding prospective for the clinical use of core decompression of the femoral head.

Cell Scaffolds for Bone Tissue Engineering

Currently, well-known surgical procedures for bone defects are classified into four types: (1) autogenous bone graft transplantation, (2) allogeneic bone graft transplantation, (3) xenogeneic bone graft transplantation, and (4) artificial bone graft transplantation. However, they are often risky procedures and related to postoperative complications. As an alternative, tissue engineering to regenerate new bone often involves the use of mesenchymal stem cells (MSCs), derived from bone marrow, adipose tissues, and so on, which are cultured into three-dimensional (3D) scaffolds to regenerate bone tissue by osteoinductive signaling. In this manuscript, we provide an overview of recent treatment of bone defects and the studies on the creation of cell scaffolds for bone regeneration. Bone regeneration from bone marrow-derived mesenchymal stem cells using silica nonwoven fabric by the authors' group were provided. Potential application and future direction of the present systems were also described.

Metal-based nanoparticles for bone tissue engineering

Tissue is vital to the organization of multicellular organisms, because it creates the different organs and provides the main scaffold for body shape. The quest for effective methods to allow tissue regeneration and create scaffolds for new tissue growth has intensified in recent years. Tissue engineering has recently used some promising alternatives to existing conventional scaffold materials, many of which have been derived from nanotechnology. One important example of these is metal nanoparticles. The purpose of this review is to cover novel tissue engineering methods, paying special attention to those based on the use of metal-based nanoparticles. The unique physiochemical properties of metal nanoparticles, such as antibacterial effects, shape memory phenomenon, low cytotoxicity, stimulation of the proliferation process, good mechanical and tensile strength, acceptable biocompatibility, significant osteogenic potential, and ability to regulate cell growth pathways, suggest that they can perform as novel types of scaffolds for bone tissue engineering. The basic principles of various nanoparticle-based composites and scaffolds are discussed in this review. The merits and demerits of these particles are critically discussed, and their importance in bone tissue engineering is highlighted.

Preparation of PBS/PLLA/HAP Composites by the Solution Casting Method: Mechanical Properties and Biocompatibility

The use of biodegradable polymeric scaffolds for tissue regeneration is becoming a common practice in the clinic. Therefore, an inclined trend is developing with regards to improving the mechanical properties of these scaffolds. Here, we aim to improve the mechanical properties of poly (butylene succinate) (PBS)/poly (l-lactic acid) (PLLA) blends by incorporating hydroxyapatite nanoparticles (HAP) in the blends to form composites. PBS/PLLA = 100/0, 95/5, 90/10, 85/15, and 0/100 wt% blends, along-with the loadings of a few mg of HAPs, were prepared using the solution casting method. A scanning electron microscope showed the voids and droplets, indicating the immiscibility of blends. Due to this immiscibility, the tensile strength values of the blends were found to be in between that of pure PBS (42.85 MPa) and pure PLLA (31.39 MPa). HAPs act as a compatibilizer by incorporating themselves in the voids and spaces caused by the immiscibility, thus increasing the overall tensile strength of the resulting composite to a certain extent, e.g., the tensile strength of PBS/PLLA = 95/5 loaded with 50 mg HAPs was found to be 51.16 MPa. The structural analysis employing the X-ray diffraction (XRD) patterns confirmed the formation of polymer blends and composites. The contact angle analysis showed that the addition of HAPs increased the hydrophilicity of the resulting composites. Selective samples were investigated based on mechanical properties to see if the blends and composites are biocompatible. The obtained results showed that all of the samples with better mechanical properties demonstrated good biocompatibility. This indicates the effectiveness of scaffolds for tissue regeneration.

Hydrogel as a Biomaterial for Bone Tissue Engineering: A Review

Severe bone damage from diseases, including extensive trauma, fractures, and bone tumors, cannot self-heal, while traditional surgical treatment may bring side effects such as infection, inflammation, and pain. As a new biomaterial with controllable mechanical properties and biocompatibility, hydrogel is widely used in bone tissue engineering (BTE) as a scaffold for growth factor transport and cell adhesion. In order to make hydrogel more suitable for the local treatment of bone diseases, hydrogel preparation methods should be combined with synthetic materials with excellent properties and advanced technologies in different fields to better control drug release in time and orientation. It is necessary to establish a complete method to evaluate the hydrogel's properties and biocompatibility with the human body. Moreover, establishment of standard animal models of bone defects helps in studying the therapeutic effect of hydrogels on bone repair, as well as to evaluate the safety and suitability of hydrogels. Thus, this review aims to systematically summarize current studies of hydrogels in BTE, including the mechanisms for promoting bone synthesis, design, and preparation; characterization and evaluation methods; as well as to explore future applications of hydrogels in BTE.

Perspectives on Synthetic Materials to Guide Tissue Regeneration for Osteochondral Defect Repair

Regenerative engineering holds the potential to treat clinically pervasive osteochondral defects (OCDs). In a synthetic materials-guided approach, the scaffold's chemical and physical properties alone instruct cellular behavior in order to effect regeneration, referred to herein as "instructive" properties. While this alleviates the costs and off-target risks associated with exogenous growth factors, the scaffold must be potently instructive to achieve tissue growth. Moreover, toward achieving functionality, such a scaffold should also recapitulate the spatial complexity of the osteochondral tissues. Thus, in addition to the regeneration of the articular cartilage and underlying cancellous bone, the complex osteochondral interface, composed of calcified cartilage and subchondral bone, should also be restored. In this Perspective, we highlight recent synthetic-based, instructive osteochondral scaffolds that have leveraged new material chemistries as well as innovative fabrication strategies. In particular, scaffolds with spatially complex chemical and morphological features have been prepared with electrospinning, solvent-casting-particulate-leaching, freeze-drying, and additive manufacturing. While few synthetic scaffolds have advanced to clinical studies to treat OCDs, these recent efforts point to the promising use of the chemical and physical properties of synthetic materials for regeneration of osteochondral tissues.

Enhancement of BMP-2 and VEGF carried by mineralized collagen for mandibular bone regeneration

Repairing damage in the craniofacial skeleton is challenging. Craniofacial bones require intramembranous ossification to generate tissue-engineered bone grafts via angiogenesis and osteogenesis. Here, we designed a mineralized collagen delivery system for BMP-2 and vascular endothelial growth factor (VEGF) for implantation into animal models of mandibular defects. BMP-2/VEGF were mixed with mineralized collagen which was implanted into the rabbit mandibular. Animals were divided into (i) controls with no growth factors; (ii) BMP-2 alone; or (iii) BMP-2 and VEGF combined. CT and hisomputed tomography and histological staining were performed to assess bone repair. New bone formation was higher in BMP-2 and BMP-2-VEGF groups in which angiogenesis and osteogenesis were enhanced. This highlights the use of mineralized collagen with BMP-2/VEGF as an effective alternative for bone regeneration.

In vitro biomineralization on poly(vinyl alcohol)/biphasic calcium phosphate hydrogels

Biomineralized tissue is considered the final product of successful cell culture in bone tissue engineering. Dulbecco’s modified Eagle’s medium (DMEM) with fetal bovine serum (FBS) not only is used as a common culture medium but also provides a natural biomineralization environment, due to having similar ionic concentrations as blood plasma. Here, poly(vinyl alcohol) hydrogel with incorporated biphasic calcium phosphate nanoparticles was immersed in a DMEM–FBS cell culture medium, and then biomineralization occurred on the nanocomposite surface, which was characterized by Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy. Such formed bone-like apatite on the surface facilitated the proliferation of osteoblasts, identified by Cell Counting Kit-8 analysis and fluorescent microscopy. This study verified the spontaneous biomineralization on the surface of a calcium phosphate-based nanocomposite by using a simple DMEM–FBS immersion strategy, which was promising for biomodification of bone substitutes.

Sr-HA scaffolds fabricated by SPS technology promote the repair of segmental bone defects

BACKGROUND

Ideal bone defect repair scaffolds should be biodegradable, biocompatible, bioactive, porous, and provide adequate mechanical support. However, it is challenging to fabricate such an ideal bone repair scaffold. Previously, we showed that 5 wt.% strontium-doped hydroxyapatite (Sr-HA) scaffolds prepared by spark plasma sintering (SPS) technology exhibited good biocompatibility. Moreover, unlike pure hydroxyapatite (HA) scaffolds, HA scaffolds containing strontium (Sr) exhibited superior bioactivity, higher proliferation rate of BMSCs and MG-63 osteoblast cells, as well as enhanced BMSCs differentiation.

METHODS

In this study, we prepared pure HA scaffolds and 5 wt.% strontium containing Sr-HA scaffolds by SPS technology without adhesive, ammonium bicarbonate as pore former. Subsequently, scanning electron microscope (SEM) and X-Ray diffraction (XRD) were used to characterize the properties of Sr-HA and HA scaffolds. The ability of the scaffolds to repair bone defects was evaluated using a critical-sized rabbit tibia-bone defect rabbit model. Thirty 3-month-old New Zealand white rabbits were randomly divided into three groups (blank control group, Sr-HA scaffolds implanted group and HA scaffolds implanted group) with 10 rabbits in each group. These rabbits are sacrificed after 8 weeks and 16 weeks of surgery, and the repair effects of each scaffold were evaluated with X-ray, micro-CT, and HE staining. The three-point bending test was employed to assess the mechanical property of repaired bones.

RESULTS

XRD pattern indicated that Sr-HA and HA scaffolds possess a similar crystal structure after sintering, and that incorporation of strontium did not form impure phase. SEM showed that the porosity of Sr-HA and HA scaffolds was about 40 %. Universal Testing Machine tests showed that Sr-HA scaffolds had better compressive strength than HA scaffolds. Bone defect was obvious, and the fibrous tissue was formed in the bone defects of rabbits in the blank control group after 8 weeks of surgery. Sr-HA and HA scaffolds enhanced osteointegration of the host bone, and extensive woven bone was formed on the surface of the Sr-HA scaffolds. After 16 weeks, the bone strump became blunt and a small amount of callus was formed in the blank control group. Comparatively, the scaffolds were substantially degraded in the Sr-HA scaffolds implanted group while scaffolds shadows still were observed in the HA implanted group. Bone remodeling and cavity recanalization were completely developed in the Sr-HA scaffolds group. The compressive strength of repaired bone in the Sr-HA scaffolds implantation group was higher than that of HA scaffolds implantation group after 8 weeks and 16 weeks of surgery.

CONCLUSIONS

Our results show that the Sr-HA composite scaffolds can effectively repair bone defects and have good biodegradable properties.

Fabrication of Mechanically Reinforced Gelatin/Hydroxyapatite Bio-Composite Scaffolds by Core/Shell Nozzle Printing for Bone Tissue Engineering

In tissue engineering, biocompatible scaffolds are used as 3D cell niches to provide a similar environment to that of native tissue for seeded cells to regenerate the target tissue. When engineering bone tissue, high mechanical strength and calcium phosphate composition are essential factors to consider. In this study, we fabricated biocompatible composite scaffolds composed of synthetic polymers (polycaprolactone (PCL) and poly (vinyl alcohol) (PVA)), natural polymers (gelatin and collagen) and bioceramic (hydroxyapatite; HA) for bone tissue engineering. The synthetic polymers were used to enhance the mechanical properties of the composite scaffolds while the natural protein-based polymers were used to enhance various cellular activities, such as cell adhesion and proliferation. Meanwhile, the bioceramic was introduced to promote osteogenic differentiation. Composite scaffolds were evaluated for their physical characteristics, such as mechanical, swelling and protein absorbing properties as well as biological properties (cell proliferation, alkaline phosphatase (ALP) activities and calcium deposition) with human osteoblast-like cells (MG63). Consequently, incorporation of hydroxyapatite into the gelatin/PVA (C-GPH) scaffold showed 5-fold and 1.5-fold increase in calcium deposition and ALP activities, respectively compared to gelatin/PVA scaffold (C-GP). Moreover, compressive modulus also increased 1.8-fold. Integration of PCL core into gelatin/PVA/hydroxyapatite scaffold (C-PGPH) further amplified the compressive modulus 1.5-fold. In conclusion, the scaffold that is reinforced with HA particles and integrated with PCL core of the struts showed significant potential in field of bone tissue engineering.

Recent advances in the application of mesoporous silica-based nanomaterials for bone tissue engineering

Silica nanomaterials (SNMs) and their composites have recently been investigated as scaffolds for bone tissue engineering. SNM scaffolds possess the ability to encourage bone cell growth and also allow the simultaneous delivery of biologically active biomolecules that are encapsulated in the mesopores. Their high mechanical strength, low cytotoxicity, ability to stimulate both the proliferation and osteogenic differentiation of progenitor cells make the SNMs appropriate scaffolds. Their physiochemical properties facilitate the cell spreading process, allow easy access to nutrients and help the cell-cell communication process during bone tissue engineering. The ability to deliver small biomolecules, such as dexamethasone, different growth factors, vitamins and mineral ions depends on the morphology, porosity, and crystallinity of SNMs and their composites with other polymeric materials. In this review, the abilities of SNMs to perform as suitable scaffolds for bone tissue engineering are comprehensively discussed.

Multimaterial Dual Gradient Three-Dimensional Printing for Osteogenic Differentiation and Spatial Segregation

In this study of three-dimensional (3D) printed composite β-tricalcium phosphate (β-TCP)-/hydroxyapatite/poly(ɛ-caprolactone)-based constructs, the effects of vertical compositional ceramic gradients and architectural porosity gradients on the osteogenic differentiation of rabbit bone marrow-derived mesenchymal stem cells (MSCs) were investigated. Specifically, three different concentrations of β-TCP (0, 10, and 20 wt%) and three different porosities (33% ± 4%, 50% ± 4%, and 65% ± 3%) were examined to elucidate the contributions of chemical and physical gradients on the biochemical behavior of MSCs and the mineralized matrix production within a 3D culture system. By delaminating the constructs at the gradient transition point, the spatial separation of cellular phenotypes could be specifically evaluated for each construct section. Results indicated that increased concentrations of β-TCP resulted in upregulation of osteogenic markers, including alkaline phosphatase activity and mineralized matrix development. Furthermore, MSCs located within regions of higher porosity displayed a more mature osteogenic phenotype compared to MSCs in lower porosity regions. These results demonstrate that 3D printing can be leveraged to create multiphasic gradient constructs to precisely direct the development and function of MSCs, leading to a phenotypic gradient. Impact Statement In this study, three-dimensional (3D) printed ceramic/polymeric constructs containing discrete vertical gradients of both composition and porosity were fabricated to precisely control the osteogenic differentiation of mesenchymal stem cells. By making simple alterations in construct architecture and composition, constructs containing heterogenous populations of cells were generated, where gradients in scaffold design led to corresponding gradients in cellular phenotype. The study demonstrates that 3D printed multiphasic composite constructs can be leveraged to create complex heterogeneous tissues and interfaces.

Cerium (III) and (IV) containing mesoporous glasses/alginate beads for bone regeneration: bioactivity, biocompatibility and reactive oxygen species activity

A very small number of biomaterials investigated for bone regeneration was reported as able to prevent the oxidative stress. In this study beads based on alginate hydrogel and mesoporous glasses (MG) containing different amounts of cerium oxides (Ce3+/Ce4+) exhibiting antioxidant properties were investigated as a good approach to mimic the action of antioxidant enzymes in our organism. The effect of cerium contents on the bioactivity and biocompatibility of beads were investigated. Moreover, the potential capability of Ce-containing MG to prevent the oxidative stress caused by the activity of reactive oxygen species (ROS) was here investigated for the first time. The increment of cerium oxide from 1.2, to 3.6 and 5.3 mol-% decreases the surface area and porosity of MG and increases the catalase mimetic activity after 168 h. Swelling tests in different cell culture media (D- and α-MEM) demonstrated the rehydration capability of beads. The presence of beads with the highest Ce-contents (3.6 and 5.3 %) improved the proliferation of pre-osteoblastic cells MC3T3-Cl cells. However, the cell differentiation decreased when increased the cerium content. Lactate dehydrogenase assays showed beads are cytocompatible materials. Moreover, oxidative stress tests with H2O2 showed a better response related to cell viability and the elimination of oxidant species when increased cerium content. Beads of glasses with 1.2 and 3.6 % of CeO2 are excellent candidates as bioactive scaffolds for bone regeneration capable of counteract the oxidative stress.

Ginseng compound K incorporated porous Chitosan/biphasic calcium phosphate composite microsphere for bone regeneration

There is a substantial for the bone graft materials in the clinical field. Porous, stable and biodegradable bone microsphere scaffold using biopolymer chitosan was studied, and biphasic calcium phosphate was added to improve mechanical and osteoconductivity properties later ginseng compound K was added for improving its medicinal properties. They were characterized using FTIR and XRD that showed the apatite crystal in the composite microsphere scaffolds were structurally similar to that of biogenic apatite crystals. Scanning electron microscopy images confirmed the presence of hydroxyapatite on the surface of the composite microspheres. In vitro results infers that the composite microspheres are biocompatible with NIH 3T3 and MG63 cells and capable of supporting growth and spreading of MG-63 cells. Further, Osteogenic markers expression was found to be higher in rat bone marrow stem cells seeded on microsphere scaffolds compared to control. The prepared biocomposite porous microsphere scaffold developed in this study can be used as an alternative for the bone regeneration or bone tissue engineering.

Salvianolic Acid B-Loaded Chitosan/hydroxyapatite Scaffolds Promotes The Repair Of Segmental Bone Defect By Angiogenesis And Osteogenesis

Background

Salvianolic acid B has been proven as an effective drug to promote osteogenesis and angiogenesis which could be beneficial for bone repair.

Purpose

The objective of this study was to construct a salvianolic acid B-loaded chitosan/hydroxyapatite (Sal B-CS/HA) bone scaffold with controlled release and effective bioactivity.

Methods

The characteristics, controlled release behavior and bioactivity of Sal B-CS/HA scaffold were evaluated in vitro. The bone repair effect was evaluated in the rabbit radius defect model.

Results

The results showed that chemical and physical characteristics of salvianolic acid B and chitosan/hydroxyapatite (CS/HA) material did not obviously change after the drug loading procedure; the drug release of salvianolic acid B was stable and continuous from the Sal B-CS/HA scaffold for 8 weeks in vitro; the biocompatibility of the Sal B-CS/HA was favorable by evaluation of cell morphology and proliferation; the osteogenic and angiogenic bioactivities of the Sal B-CS/HA scaffold were proved to be effective by in vivo and in vitro tests.

Conclusion

Our results suggest that this salvianolic acid B-loaded bone scaffold has potential to be used for bone defect repair with both osteogenic and angiogenic bioactivities.

Promoted Osteoconduction of Polyurethane-Urea Based 3D Nanohybrid Scaffold through Nanohydroxyapatite Adorned Hierarchical Titanium Phosphate

The lack of optimal physiological properties, bacterial colonization, and auto-osteoinduction, are the foremost issues of orthopedic implantations. In terms of bone healing, many researchers have reported the release of additional growth factors of the implanted biomaterials to accelerate the bone regeneration process. However, the additional growth factor may cause side effects such as contagion, nerve pain, and the formation of ectopic bone. Thus, the design of an osteoconductive scaffold having excellent biocompatibility, appropriate physicomechanical properties, and promoted auto osteoinductivity with antibacterial activity is greatly desired. In this study, 2D rodlike nanohydroxyapatite (nHA) adorned titanium phosphate (TP) with a flowerlike morphology was synthesized by a hydrothermal precipitation reaction. The nanohybrid material (nHA-TP) was incorporated into the synthesized polycaprolactone diol and spermine based thermoplastic polyurethane-urea (PUU) via in situ technique followed by salt leaching to fabricate the macroporous 3D polymer nanohybrid scaffold (PUU/nHA-TP). Structure explication of PUU was performed by NMR spectroscopy. The synthesized nanohybrid scaffold with 1% nHA-TP showed 67% increase of tensile strength and 18% improved modulus compared to the pristine PUU via formation of H-bonding or dative bonds between the metal and the amide linkage of the polyurethane or polyurea. In vitro study showing improved cell viability and proliferation of the seeded cell revealed the superior osteoconductivity of the nanohybrid scaffold. Most importantly, the in vivo experiments revealed a significant amount of bone regeneration in the nanohybrid scaffold implanted tibial site compared to the pristine scaffold without any toxic effect. Introduction of the minute amount of titanium phosphate within the adorned nHA promotes the osteoconductivity significantly by the capability of forming coordinate bonds of the titanium ion. Depending on the mechanical, physicochemical, in vitro characteristics, and in vivo osteoconductivity, the PUU/nHA-TP nanohybrid scaffold has great potential as an alternative biomaterial in bone tissue regeneration application.

Rapid fabrication of vascularized and innervated cell-laden bone models with biomimetic intrafibrillar collagen mineralization

Bone tissue, by definition, is an organic–inorganic nanocomposite, where metabolically active cells are embedded within a matrix that is heavily calcified on the nanoscale. Currently, there are no strategies that replicate these definitive characteristics of bone tissue. Here we describe a biomimetic approach where a supersaturated calcium and phosphate medium is used in combination with a non-collagenous protein analog to direct the deposition of nanoscale apatite, both in the intra- and extrafibrillar spaces of collagen embedded with osteoprogenitor, vascular, and neural cells. This process enables engineering of bone models replicating the key hallmarks of the bone cellular and extracellular microenvironment, including its protein-guided biomineralization, nanostructure, vasculature, innervation, inherent osteoinductive properties (without exogenous supplements), and cell-homing effects on bone-targeting diseases, such as prostate cancer. Ultimately, this approach enables fabrication of bone-like tissue models with high levels of biomimicry that may have broad implications for disease modeling, drug discovery, and regenerative engineering.

Bone tissue is a complex organic-inorganic nanocomposite and strategies that replicate the characteristics of bone tissue are scarce. Here the authors demonstrate the deposition of nanoscale apatite in collagen embedded with mesenchymal, vascular and nerve cells, using a protein-guided biomineralization approach.

Vitamin D-conjugated gold nanoparticles as functional carriers to enhancing osteogenic differentiation

In an aging society, bone disorders such as osteopenia, osteoporosis, and degenerative arthritis cause serious public health problems. In order to solve these problems, researchers continue to develop therapeutic agents, increase the efficacy of developed therapeutic agents, and reduce side effects. Gold nanoparticles (GNPs) are widely used in tissue engineering applications as biosensors, drug delivery carriers, and bioactive materials. Their special surface property enables easy conjugation with ligands including functional groups such as thiols, phosphines, and amines. This creates an attractive advantage to GNPs for use in the bone tissue engineering field. However, GNPs alone are limited in their biological effects. In this study, we used thiol-PEG-vitamin D (SPVD) to conjugate vitamin D, an essential nutrient critical for maintaining normal skeletal homeostasis, to GNPs. To characterize vitamin D-conjugated GNPs (VGNPs), field emission transmission electron microscopy, energy dispersive X-ray spectroscopy, dynamic light scattering, and ultraviolet/visible absorption analysis were carried out. The developed VGNPs were well bound through the thiol groups between GNPs and vitamin D, and were fabricated in size of 60 nm. Moreover, to demonstrate VGNPs osteogenic differentiation effect, various assays were carried out through cell viability test, alkaline phosphatase assay, calcium deposition assay, real-time polymerase chain reaction, and immunofluorescence staining. As a result, the fabricated VGNPs were found to effectively enhance osteogenic differentiation of human adipose-derived stem cells (hADSCs) in vitro. Based on these results, VGNPs can be utilized as functional nanomaterials for bone regeneration in the tissue engineering field.