Mandibular defect reconstruction using three-dimensional polycaprolactone scaffold in combination with platelet-rich plasma and recombinant human bone morphogenetic protein-2: de novo synthesis of bone in a single case

Clinical translation of polycaprolactone-based tissue engineering scaffolds, fabricated via additive manufacturing: A review of their craniofacial applications

The craniofacial region is characterized by its intricate bony anatomy and exposure to heightened functional forces presenting a unique challenge for reconstruction. Additive manufacturing has revolutionized the creation of customized scaffolds with interconnected pores and biomimetic microarchitecture, offering precise adaptation to various craniofacial defects. Within this domain, medical-grade poly(ε-caprolactone) (PCL) has been extensively used for the fabrication of 3D printed scaffolds, specifically tailored for bone regeneration. Its adoption for load-bearing applications was driven mainly by its mechanical properties, adjustable biodegradation rates, and high biocompatibility. The present review aims to consolidating current insights into the clinical translation of PCL-based constructs designed for bone regeneration. It encompasses recent advances in enhancing the mechanical properties and augmenting biodegradation rates of PCL and PCL-based composite scaffolds. Moreover, it delves into various strategies improving cell proliferation and the osteogenic potential of PCL-based materials. These strategies provide insight into the refinement of scaffold microarchitecture, composition, and surface treatments or coatings, that include certain bioactive molecules such as growth factors, proteins, and ceramic nanoparticles. The review critically examines published data on the clinical applications of PCL scaffolds in both extraoral and intraoral craniofacial reconstructions. These applications include cranioplasty, nasal and orbital floor reconstruction, maxillofacial reconstruction, and intraoral bone regeneration. Patient demographics, surgical procedures, follow-up periods, complications and failures are thoroughly discussed. Although results from extraoral applications in the craniofacial region are encouraging, intraoral applications present a high frequency of complications and related failures. Moving forward, future studies should prioritize refining the clinical performance, particularly in the domain of intraoral applications, and providing comprehensive data on the long-term outcomes of PCL-based scaffolds in bone regeneration. Future perspective and limitations regarding the transition of such constructs from bench to bedside are also discussed.

3D printing for bone regeneration: challenges and opportunities for achieving predictability

3D printing offers attractive opportunities for large-volume bone regeneration in the oro-dental and craniofacial regions. This is enabled by the development of CAD-CAM technologies that support the design and manufacturing of anatomically accurate meshes and scaffolds. This review describes the main 3D-printing technologies utilized for the fabrication of these patient-matched devices, and reports on their pre-clinical and clinical performance including the occurrence of complications for vertical bone augmentation and craniofacial applications. Furthermore, the regulatory pathway for approval of these devices is discussed, highlighting the main hurdles and obstacles. Finally, the review elaborates on a variety of strategies for increasing bone regeneration capacity and explores the future of 4D bioprinting and biodegradable metal 3D printing.

Clinical Application of 3D-Printed Patient-Specific Polycaprolactone/Beta Tricalcium Phosphate Scaffold for Complex Zygomatico-Maxillary Defects

(1) Background: In the present study, we evaluated the efficacy of a 3D-printed, patient-specific polycaprolactone/beta tricalcium phosphate (PCL/β-TCP) scaffold in the treatment of complex zygomatico-maxillary defects. (2) Methods: We evaluated eight patients who underwent immediate or delayed maxillary reconstruction with patient-specific PCL implants between December 2019 and June 2021. The efficacy of these techniques was assessed using the volume and density analysis of computed tomography data obtained before surgery and six months after surgery. (3) Results: Patients underwent maxillary reconstruction with the 3D-printed PCL/β-TCP scaffold based on various reconstructive techniques, including bone graft, fasciocutaneous free flaps, and fat graft. In the volume analysis, satisfactory volume conformity was achieved between the preoperative simulation and actual implant volume with a mean volume conformity of 79.71%, ranging from 70.89% to 86.31%. The ratio of de novo bone formation to total implant volume (bone volume fraction) was satisfactory with a mean bone fraction volume of 23.34%, ranging from 7.81% to 66.21%. Mean tissue density in the region of interest was 188.84 HU, ranging from 151.48 HU to 291.74 HU. (4) Conclusions: The combined use of the PCL/β-TCP scaffold with virtual surgical simulation and 3D printing techniques may replace traditional non-absorbable implants in the future owing to its accuracy and biocompatible properties.

Personalized medicine for reconstruction of critical-size bone defects - a translational approach with customizable vascularized bone tissue

Tissue engineering principles allow the generation of functional tissues for biomedical applications. Reconstruction of large-scale bone defects with tissue-engineered bone has still not entered the clinical routine. In the present study, a bone substitute in combination with mesenchymal stem cells (MSC) and endothelial progenitor cells (EPC) with or without growth factors BMP-2 and VEGF-A was prevascularized by an arteriovenous (AV) loop and transplanted into a critical-size tibia defect in the sheep model. With 3D imaging and immunohistochemistry, we could show that this approach is a feasible and simple alternative to the current clinical therapeutic option. This study serves as proof of concept for using large-scale transplantable, vascularized, and customizable bone, generated in a living organism for the reconstruction of load-bearing bone defects, individually tailored to the patient's needs. With this approach in personalized medicine for the reconstruction of critical-size bone defects, regeneration of parts of the human body will become possible in the near future.

Multi-Dimensional Printing for Bone Tissue Engineering

The development of 3D printing has significantly advanced the field of bone tissue engineering by enabling the fabrication of scaffolds that faithfully recapitulate desired mechanical properties and architectures. In addition, computer-based manufacturing relying on patient-derived medical images permits the fabrication of customized modules in a patient-specific manner. In addition to conventional 3D fabrication, progress in materials engineering has led to the development of 4D printing, allowing time-sensitive interventions such as programed therapeutics delivery and modulable mechanical features. Therapeutic interventions established via multi-dimensional engineering are expected to enhance the development of personalized treatment in various fields, including bone tissue regeneration. Here, recent studies utilizing 3D printed systems for bone tissue regeneration are summarized and advances in 4D printed systems are highlighted. Challenges and perspectives for the future development of multi-dimensional printed systems toward personalized bone regeneration are also discussed.

Evaluation of polycaprolactone scaffold for guided bone regeneration in maxillary and mandibular defects: A clinical study

Objective

This study was carried out to assess bone regeneration following the use of polycaprolactone (PCL) scaffold in maxillary and mandibular osseous defects.

Materials and Methods

This prospective study included ten patients with maxillary or mandibular osseous defects present due to enucleation of periapical cysts or alveolar clefts requiring bone grafting and for lateral ridge augmentation that were treated with PCL scaffold. The patients were assessed clinically for pain, swelling, infection, and graft exposure at 1 week, 3^rd, and 5^th month postoperatively and were also evaluated radiographically for bone fill using intraoral periapical and/or panoramic radiographs at 4^th, 6^th, and 9^th month postoperatively.

Results

PCL scaffold was used in a total of six alveolar clefts and three cases of periapical cysts and one case of lateral ridge augmentation. Nine out of ten cases demonstrated wound dehiscence and scaffold exposure in the oral cavity. Radiographically, on comparison to the control regions, all these nine cases failed to demonstrate appreciable bone density gain. Only one case of radicular cyst in the mandible was recorded to have satisfactory healing.

Conclusion

Although PCL scaffold has the potential for bone regeneration in osseous defects, the scaffold exhibited marked tendency for dehiscence in intraoral defects that significantly affected bone healing. A long-term study designed with a larger sample size and categorization of the defects is required to assess its efficacy in varied defects. Moreover, comparative evaluation of PCL and autogenous or alloplastic bone grafting material could provide assenting results.

Three-Dimensional Printed Polycaprolactone Scaffolds for Bone Regeneration Success and Future Perspective

IMPACT STATEMENT

Cells need a home to proliferate and remodel; biomimicry of the microarchitecture and microenvironment is important, and with 10 years of history in more than 20,000 clinical applications of 3D printed medical grade polycaprolactone scaffolds, we present the lessons learnt and project the future.

Simultaneous elastic shape optimization for a domain splitting in bone tissue engineering

This paper deals with the simultaneous optimization of a subset O 0 of some domain Ω and its complement O 1 = Ω ∖ O 0 ¯ both considered as separate elastic objects subject to a set of loading scenarios. If one asks for a configuration which minimizes the maximal elastic cost functional both phases compete for space since elastic shapes usually get mechanically more stable when being enlarged. Such a problem arises in biomechanics where a bioresorbable polymer scaffold is implanted in place of lost bone tissue and in a regeneration phase, new bone tissue grows in the scaffold complement via osteogenesis. In fact, the polymer scaffold should be mechanically stable to bear loading in the early stage regeneration phase and at the same time, the new bone tissue grown in the complement of this scaffold should as well bear the loading. Here, this optimal subdomain splitting problem with appropriate elastic cost functionals is introduced and the existence of optimal two-phase configurations is established for a regularized formulation. Furthermore, based on a phase-field approximation, a finite-element discretization is derived. Numerical experiments are presented for the design of optimal periodic scaffold microstructure.

Optimization of Bone Scaffold Porosity Distributions

Additive manufacturing (AM) is a rapidly emerging technology that has the potential to produce personalized scaffolds for tissue engineering applications with unprecedented control of structural and functional design. Particularly for bone defect regeneration, the complex coupling of biological mechanisms to the scaffolds' properties has led to a predominantly trial-and-error approach. To mitigate this, shape or topology optimization can be a useful tool to design a scaffold architecture that matches the desired design targets, albeit at high computational cost. Here, we consider an efficient macroscopic optimization routine based on a simple one-dimensional time-dependent model for bone regeneration in the presence of a bioresorbable polymer scaffold. The result of the optimization procedure is a scaffold porosity distribution which maximizes the stiffness of the scaffold and regenerated bone system over the entire regeneration time, so that the propensity for mechanical failure is minimized.

Platelet-Rich Plasma for the Treatment of Tissue Infection: Preparation and Clinical Evaluation

IMPACT STATEMENT

The clinical application of platelet-rich plasma (PRP) has been widely studied for its effects on trauma or injury repair/regeneration, however the antibacterial property of PRP has been overlooked. Increasing evidence suggests PRP as a good antibacterial agent and that it could help prevent/treat tissue infection. This review emphasizes the importance of PRP's antibacterial property and summarizes the preclinical and clinical findings regarding the application of PRP in the prevention and treatment of wound and bone infection. The use of biocompatible PRP may be advantageous for tissue infection treatment due to its inherent antibacterial and healing promoting properties.

Bone, Periodontal and Dental Pulp Regeneration in Dentistry: A Systematic Scoping Review

Abstract The aim of presented systematic scoping review was to investigate the actual and future clinical possibilities of regenerative therapies and their ability to regenerate bone, periodontal and pulp with histological confirmation of the nature of formed tissue. Electronic search was conducted using a combination between Keywords and MeSH terms in PubMed, Scopus, ISI-Web of Science and Cochrane library databases up to January 2016. Two reviewers conducted independently the papers judgment. Screened studies were read following the predetermined inclusion criteria. The included studies were evaluated in accordance with Arksey and O’Malley’s modified framework. From 1349 papers, 168 completed inclusion criteria. Several characterized and uncharacterized cells used in Cell Therapy have provided bone regeneration, demonstrating bone gain in quantity and quality, even as accelerators for bone and periodontal regeneration. Synthetic and natural scaffolds presented good cell maintenance, however polyglycolid-polylactid presented faster resorption and consequently poor bone gain. The Growth Factor-Mediated Therapy was able to regenerate bone and all features of a periodontal tissue in bone defects. Teeth submitted to Revascularization presented an increase of length and width of root canal. However, formed tissues not seem able to deposit dentin, characterizing a repaired tissue. Both PRP and PRF presented benefits when applied in regenerative therapies as natural scaffolds. Therefore, most studies that applied regenerative therapies have provided promising results being possible to regenerate bone and periodontal tissue with histological confirmation. However, pulp regeneration was not reported. These results should be interpreted with caution due to the short follow-up periods.

In vivo evaluation of a regenerative approach to nasal dorsum augmentation with a polycaprolactone-based implant

Background

Alternative techniques for nasal dorsum augmentation are of paramount importance in reconstructive and plastic surgery. In contrast to autologous cartilage grafts, tissue-engineered grafts can be created de novo and yield low–none donor site morbidity as compared to autologous grafts like rib or ear cartilage. To address this demand, this study investigated the in vivo regenerative potential of polycaprolactone-based implants as an alternative to autologous cartilage grafting during rhinoplasty.

Methods

Implants were placed at the nasal dorsum in two groups of minipigs and kept in situ for 2 and 6 months, respectively. Subsequently, the implants were harvested and examined by histology (hematoxylin–eosin, alcian blue, and safranin O) and immunostaining (collagen I and collagen II). Further analysis was performed to measure diameter and distance of polycaprolactone struts.

Results

Histological examination revealed a persistent formation of connective tissue with some spots resembling a cartilaginous-like matrix after 6 months. In such areas, cells of chondrocyte appearance could be identified. There was a significant decrease in strut diameter but a non-significant difference in strut distance.

Conclusion

Our results indicated that the investigated polycaprolactone-based implants have shown a regenerative and stable nasal dorsum augmentation after 6 months in vivo. Thus, we believe that customized polycaprolactone-based implants could become an alternative technique for nasal dorsum augmentation without the need for autologous cartilage grafts.

Controlled degradability of PCL-ZnO nanofibrous scaffolds for bone tissue engineering and their antibacterial activity

Up to date, tissue regeneration of large bone defects is a clinical challenge under exhaustive study. Nowadays, the most common clinical solutions concerning bone regeneration involve systems based on human or bovine tissues, which suffer from drawbacks like antigenicity, complex processing, low osteoinductivity, rapid resorption and minimal acceleration of tissue regeneration. This work thus addresses the development of nanofibrous synthetic scaffolds of polycaprolactone (PCL) - a long-term degradation polyester - compounded with hydroxyapatite (HA) and variable concentrations of ZnO as alternative solutions for accelerated bone tissue regeneration in applications requiring mid- and long-term resorption. In vitro cell response of human fetal osteoblasts as well as antibacterial activity against Staphylococcus aureus of PCL:HA:ZnO and PCL:ZnO scaffolds were here evaluated. Furthermore, the effect of ZnO nanostructures at different concentrations on in vitro degradation of PCL electrospun scaffolds was analyzed. The results proved that higher concentrations ZnO may induce early mineralization, as indicated by high alkaline phosphatase activity levels, cell proliferation assays and positive Alizarin-Red-S-stained calcium deposits. Moreover, all PCL:ZnO scaffolds particularly showed antibacterial activity against S. aureus which may be attributed to release of Zn²⁺ ions. Additionally, results here obtained showed a variable PCL degradation rate as a function of ZnO concentration. Therefore, this work suggests that our PCL:ZnO scaffolds may be promising and competitive short-, mid- and long-term resorption systems against current clinical solutions for bone tissue regeneration.

Axially vascularized tissue-engineered bone constructs retain their in vivo angiogenic and osteogenic capacity after high-dose irradiation

In order to introduce bone tissue engineering to the field of oncological reconstruction, we are investigating for the first time the effect of various doses of ionizing irradiation on axially vascularized bone constructs. Synthetic bone constructs were created and implanted in 32 Lewis rats. Each construct was axially vascularized through an arteriovenous loop made by direct anastomosis of the saphenous vessels. After 2 weeks, the animals received ionizing irradiation of 9 Gy, 12 Gy and 15 Gy, and were accordingly classified to groups I, II and III, respectively. Group IV was not irradiated and acted as a control. Tissue generation, vascularity, cellular proliferation and apoptosis were investigated either 2 or 5 weeks after irradiation through micro-computed tomography, histomorphometry and real-time polymerase chain reaction (PCR). At 2 weeks after irradiation, tissue generation and central vascularity were significantly lower and apoptosis was significantly higher in groups II and III than group IV, but without signs of necrosis. Cellular proliferation was significantly lower in groups I and II. After 5 weeks, the irradiated groups showed improvement in all parameters in relation to the control group, indicating a retained capacity for angiogenesis after irradiation. PCR results confirmed the expression of osteogenesis-related genes in all irradiated groups. Dense collagen was detected 5 weeks after irradiation, and one construct showed discrete islands of bone indicating a retained osteogenic capacity after irradiation. This demonstrates for the first time that axial vascularization was capable of supporting a synthetic bone construct after a high dose of irradiation that is comparable to adjuvant radiotherapy. Copyright © 2016 John Wiley & Sons, Ltd.

Strain rate and temperature effects on elastic properties of polycaprolactone/starch composite

Composite of polycaprolactone (PCL) and starch is a potential biomaterial for tissue engineering scaffolds. During implantation, its mechanical properties might be compromised considering the various strain rates it is subjected to and that human body temperature is close to polycaprolactone’s melting temperature. This study aims at revealing the effect of strain rate and temperature to the elastic properties of polycaprolactone-starch composite. Tensile test at strain rates of 5, 0.1, and 0.01 mm/min at ambient and body temperatures were performed. It was revealed that strain rate as well as temperature readily have significant effects on the composite’s elastic properties. Such effects have similar trends with that of PCL homopolymer which is used as the composite’s matrix. Further analysis on the consequence of the finding was performed by applying the behavior to a finite element model of a porous scaffold and it was found that the discrepancy in elastic properties throughout the construct is even greater.

Mandibular Tissue Engineering: Past, Present, Future

Almost 2 decades ago, the senior author's (M.T.J.) first article was with our mentor, Dr Leonard B. Kaban, a review article titled "Distraction Osteogenesis: Past, Present, Future." In 1998, many thought it would be impossible to have a remotely activated, small, curvilinear distractor that could be placed using endoscopic techniques. Currently, a U.S. patent for a curvilinear automated device and endoscopic techniques for minimally invasive access for jaw reconstruction exist. With minimally invasive access for jaw reconstruction, the burden to decrease donor site morbidity has increased. Distraction osteogenesis (DO) is an in vivo form of tissue engineering. The DO technique eliminates a donor site, is less invasive, requires a shorter operative time than usual procedures, and can be used for multiple reconstruction applications. Tissue engineering could further reduce morbidity and cost and increase treatment availability. The purpose of the present report was to review our experience with tissue engineering of bone: the past, present, and our vision for the future. The present report serves as a tribute to our mentor and acknowledges Dr Kaban for his incessant tutelage, guidance, wisdom, and boundless vision.

Osteogenic effect of controlled released rhBMP-2 in 3D printed porous hydroxyapatite scaffold

Recently, 3D printing as effective technology has been highlighted in the biomedical field. Previously, a porous hydroxyapatite (HA) scaffold with the biocompatibility and osteoconductivity has been developed by this method. However, its osteoinductivity is limited. The main purpose of this study was to improve it by the introduction of recombinant human bone morphogenetic protein-2 (rhBMP-2). This scaffold was developed by coating rhBMP-2-delivery microspheres with collagen. These synthesized scaffolds were characterized by Scanning Electron Microscopy (SEM), a delivery test in vitro, cell culture, and the experiments in vivo by a Micro-computed tomography (μCT) scan and histological evaluation of VanGieson staining. SEM results indicated the surface of scaffolds were more fit for the adhesion of hMSCs to coat collagen/rhBMP-2 microspheres. Biphasic release of rhBMP-2 could continue for more than 21 days, and keep its osteoinductivity to induce osteogenic differentiation of hMSCs in vitro. In addition, the experiments in vivo showed that the scaffold had a good bone regeneration capacity. These findings demonstrate that the HA/Collagen/Chitosan Microspheres system can simultaneously achieve localized long-term controlled release of rhBMP-2 and bone regeneration, which provides a promising route for improving the treatment of bone defects.

Axially vascularised mandibular constructs: Is it time for a clinical trial?

Applying regenerative therapies in the field of cranio-maxillofacial reconstruction has now become a daily practice. However, regeneration of challenging or irradiated bone defects following head and neck cancer is still far beyond clinical application. As the key factor for sound regeneration is the development of an adequate vascular supply for the construct, the current modalities using extrinsic vascularization are incapable of regenerating such complex defects. Our group has recently introduced the intrinsic axial vascularization technique to regenerate mandibular defects using the arteriovenous loop (AVL). The technique has shown promising results in terms of efficient vascularization and bone regeneration at the preclinical level. In this article, we have conducted a narrative literature review about using the AVL to vascularize tissue-engineering constructs at the preclinical level. We have also conducted a systematic literature review about applying the technique of axial vascularization in the field of craniofacial regeneration. The versatility of the technique and the possible challenges are discussed, and a suggested protocol for the first clinical trial applying the AVL technique for mandibular reconstruction is also presented.

Platelet preparations in dentistry: How? Why? Where? When?

The aim of this article is to review the outcomes of platelet preparations in dentistry. A structured electronic search discovered 348 articles, which described the use of autologous platelet concentrates with a relevance to clinical dentistry. Among these articles, 220 articles investigated platelet rich plasma, 99 investigated platelet rich fibrin, 22 investigated plasma rich in growth factors and 7 investigated the use of concentrated growth factors. Several studies reported beneficial treament outcomes in terms of enhanced bone and soft tissue regeneration.

Polycaprolactone scaffold as targeted drug delivery system and cell attachment scaffold for postsurgical care of limb salvage

In this paper, a dual-function drug-laden polycaprolactone scaffold, which can serve as both targeted drug delivery system and attachment platform for tissue regeneration for the postsurgical care of limb salvage procedure, was developed with a simple and solvent-free molding technique. Scaffolds of varying surface architecture were created using poly(ethylene glycol) diacrylate microneedle arrays. A model drug, rhodamine B, was incorporated homogenously into the scaffold. In vitro drug release studies showed that rhodamine B was released in a slow and sustained manner for 112 days. Its release rate was affected by drug loading and scaffold surface architecture. Release of rhodamine B from the scaffolds followed the Higuchi diffusion model. Other drugs, namely, doxorubicin and lidocaine hydrochloride, were also effectively loaded into and released from the scaffolds. Cell attachment study demonstrated potential for the scaffolds to provide attachment platforms for tissue regeneration.

In vivo ossification of a scaffold combining β-tricalcium phosphate and platelet-rich plasma

Tricalcium phosphate (TCP) and platelet-rich plasma (PRP) are commonly used in bone tissue engineering. The aim of the present study was to investigate a composite that combined TCP with PRP and assess its effectiveness in the treatment of bone defects. Cavity-shaped bone defects were established on the tibiae of 27 beagle dogs, and were repaired by pure β-TCP with bone marrow stromal cells (BMSCs), β-TCP/PRP with BMSCs and autogenic ilium. The samples were harvested at 4, 8 and 12 weeks, and bone regeneration was evaluated using X-ray radiography, immunocytochemical staining of osteocalcin (OCN), hematoxylin and eosin staining and reverse transcription-polymerase chain reaction analyses. Biomechanical tests of the scaffolds were performed at the 12th week after scaffold implantation. When using pure β-TCP as a scaffold, the scaffold-bone interface was clear and no material adsorption and bone healing was observed. Substantial bone regeneration was observed when the tibial defects were restored using β-TCP/PRP and autogenic ilium. Furthermore, the mRNA expression levels of OCN, alkaline phosphatase and collagen type I α1 were significantly higher in the animals with β-TCP/PRP scaffolds at 8 and 12 weeks following implantation compared with those in the animals with the pure β-TCP scaffolds. The maximum load and compressive strength of the β-TCP/PRP scaffolds were similar to those of the autogenic ilium; however, they were significantly higher than those of the pure β-TCP scaffold. Thus, the β-TCP/PRP composite may be used as a potential scaffold to carry in vitro cultured BMSCs to treat bone defects.

Preparation of a new composite combining strengthened β-tricalcium phosphate with platelet-rich plasma as a potential scaffold for the repair of bone defects

β-tricalcium phosphate (β-TCP) and platelet-rich plasma (PRP) are commonly used in bone tissue engineering. In the present study, a new composite combining strengthened β-TCP and PRP was prepared and its morphological and mechanical properties were investigated by scanning electron microscopy (SEM) and material testing. The biocompatibility was evaluated by measuring the adhesion rate and cytotoxicity of bone marrow stromal cells (BMSCs). The strengthened β-TCP/PRP composite had an appearance like the fungus Boletus kermesinus with the PRP gel distributed on the surface of the micropores. The maximum load and load intensity were 945.6±86.4 N and 13.1±0.5 MPa, which were significantly higher than those of β-TCP (110.1±14.3 N and 1.6±0.2 MPa; P<0.05). The BMSC adhesion rate on the strengthened β-TCP/PRP composite was >96% after 24 h, with a cell cytotoxicity value of zero. SEM micrographs revealed that following seeding of BMSCs onto the composite in high-glucose Dulbecco's modified Eagle's medium culture for two weeks, the cells grew well and exhibited fusiform, spherical and polygonal morphologies, as well as pseudopodial connections. The strengthened β-TCP/PRP composite has the potential to be used as a scaffold in bone tissue engineering due to its effective biocompatibility and mechanical properties.

Effect of umbilical cord serum coated 3D PCL/alginate scaffold for mastoid obliteration

OBJECTIVE

Human umbilical cord serum (hUCS) has a lot of growth factors. To date, there are no reports on stimulating effect of hUCS in osteogenesis. The purpose of this study is to evaluate enhancing effect of hUCS in osteogenesis by mastoid obliteration combined with bony scaffold.

MATERIALS AND METHODS

The fabrication procedure for obtaining PCL/alginate/hUCS was performed. The bulla obliteration was done using PCL/alginate/hUCS in the experimental group and PCL in the control group. To assess the early active mineralization of new bone formation, guinea pigs of each group received an intraperitoneal infusion with alizarin red at 6 weeks post-surgery. The animals of each group were sacrificed 8 weeks post-surgery. Ex vivo microCT and histologic observation were performed.

RESULTS

MicroCT finding shows more radiopaque change within the pores in the experimental group compared to the control group. Stereomicroscopic and SEM findings show new bone formation of the pores in the experimental group. However, the pores between strands almost all remained in the control group. Corresponding histological observations for the stimulatory effects of hUCS showed osteogenesis in the pores between the strands compared to the control group.

CONCLUSION

Our data suggest that hUCS coated 3D porous PCL scaffold in mastoid obliteration provides enhanced osteogenesis. Therefore, we suggest that our hUCS coated 3D porous PCL could be used in mastoid obliteration in the future.

Evaluation of a Polyethylene Glycol-Osteogenic Protein-1 System on Alveolar Bone Regeneration in the Mini-Pig

Alveolar bone regeneration associated with the local release of osteogenic protein-1 (OP-1) from a polyethylene glycol (PEG) scaffold was evaluated in 14 mini-pigs. Following extraction of mandibular teeth and 26-weeks of healing time, standardized bone defects were created bilaterally in the posterior mandibles (3 sites for each hemimandible) that were randomly assigned to treatment groups. Seven treatments groups were compared: 4 different concentrations of the PEG/OP-1 test system (n = 14 for each), a positive control (collagen/OP-1, n = 14), a negative control (PEG only, n = 7) and nontreated defects (n = 7). Each animal provided all test and control groups. The animals were sacrificed after 3 weeks of healing and samples were processed for histology and histomorphometry. Three weeks after implantation, there were positive clinical responses for all test groups. Earlier bone maturation was observed in the test groups that had higher concentrations of OP-1 (0.25, 0.5, or 1 mg/mL) compared to the negative control group (PEG alone), the low concentration group (0.1 mg/mL), and the positive control group (collagen/OP-1). However, histomorphometric quantitative analyses did not reveal any statistical difference between any of the groups. No residual PEG biomaterial or inflammatory responses to the biomaterial or growth factor were observed. This study confirmed the safe local delivery of OP-1 from PEG hydrogel. Alveolar bone regeneration was not statistically different between tests groups, negative control (PEG alone) or commercial positive control (collagen/OP-1). The semi-quantitative analysis, however, showed a trend in favor of the higher concentrations of OP-1 to induce faster bone maturation.

Three-dimensional printing of rhBMP-2-loaded scaffolds with long-term delivery for enhanced bone regeneration in a rabbit diaphyseal defect

In this study, recombinant human bone morphogenetic protein-2 (rhBMP-2) delivery system with slow mode was successfully developed in three-dimensional (3D) printing-based polycaprolactone (PCL)/poly(lactic-co-glycolic acid) (PLGA) scaffolds for bone formation of critical-sized rabbit segmental diaphyseal defect. To control the delivery of the rhBMP-2, collagen (for long-term delivery up to 28 days) and gelatin (for shor-term delivery within a week) solutions encapsulating rhBMP-2 were dispensed into a hollow cylinderical type of PCL/PLGA scaffold. An effective dose of 5μg/mL was determined by measuring the alkaline phosphatase and osteocalcin gene expression levels of human nasal inferior turbinate-derived mesenchymal stromal cells (hTMSCs) seeded on the PCL/PLGA/collagen scaffold in vitro. However, it was found that a burst release of rhBMP-2 from the PCL/PLGA/gelatin scaffold did not induce the osteogenic differentiation of hTMSCs in vitro at an equivalent dose. In the in vivo animal experiements, microcomputed tomography and histological analyses confirmed that PCL/PLGA/collagen/rhBMP-2 scaffolds (long-term delivery mode) showed the best bone healing quality at both weeks 4 and 8 after implantation without inflammatory response. On the other hand, a large number of macrophages indicating severe inflammation provoked by burst release of rhBMP-2 were observed in the vicinity of PCL/PLGA/gelatin/rhBMP-2 (short-term delivery mode) at week 4.

Bone Tissue Engineering with Adipose-Derived Stem Cells in Bioactive Composites of Laser-Sintered Porous Polycaprolactone Scaffolds and Platelet-Rich Plasma

Three-dimensional porous polycaprolactone (PCL) scaffolds with consistent inter-pore channels, 83% porosity and 300–400 μm pore size were fabricated via selective laser sintering. The PCL scaffold was combined with platelet-rich plasma (PRP) to form a bioactive composite and studied for potential application in bone tissue engineering using porcine adipose-derived stem cells (PASCs). The PCL/PRP/PASCs construct showed enhanced cell seeding efficiency and synergistically increased the differentiation capability of PASCs in osteogenic medium toward the osteoblast lineage, judging from elevated alkaline phosphatase activity and up-regulated osteogenic genes expression. For in vivo study, a 3 cm × 3 cm mandible defect was created in pigs and reconstructed by implanting acellular PCL scaffolds or PCL/PRP/PASCs constructs. Both groups showed new bone formation, however, the new bone volume was 5.1 times higher for PCL/PRP/PASCs 6 months post-operation. The bone density was less and loose in the acellular PCL group and the Young’s modulus was only 29% of normal bone. In contrast, continued and compact bone formation was found in PCL/PRP/PASCs and the Young’s modulus was 81% that of normal bone. Masson’s trichrome stain, immunohistochemical analysis of osteocalcin and collagen type I also confirmed new bone formation.

Tissue-engineered mandibular bone reconstruction for continuity defects: a systematic approach to the literature

BACKGROUND

Despite significant surgical advances over the last decades, segmental mandibular bone repair remains a challenge. In light of this, tissue engineering might offer a next step in the evolution of mandibular reconstruction.

PURPOSE

The purpose of the present report was to (1) systematically review preclinical in vivo as well as clinical literature regarding bone tissue engineering for mandibular continuity defects, and (2) to analyze their effectiveness.

MATERIALS AND METHODS

An electronic search in the databases of the National Library of Medicine and ISI Web of Knowledge was carried out. Only publications in English were considered, and the search was broadened to animals and humans. Furthermore, the reference lists of related review articles and publications selected for inclusion in this review were systematically screened. Results of histology data and amount of bone bridging were chosen as primary outcome variables. However, for human reports, clinical radiographic evidence was accepted for defined primary outcome variable. The biomechanical properties, scaffold degradation, and clinical wound healing were selected as co-outcome variables.

RESULTS

The electronic search in the databases of the National Library of Medicine and ISI Web of Knowledge resulted in the identification of 6727 and 5017 titles, respectively. Thereafter, title assessment and hand search resulted in 128 abstracts, 101 full-text articles, and 29 scientific papers reporting on animal experiments as well as 11 papers presenting human data on the subject of tissue-engineered reconstruction of mandibular continuity defects that could be included in the present review.

CONCLUSIONS

It was concluded that (1) published preclinical in vivo as well as clinical data are limited, and (2) tissue-engineered approaches demonstrate some clinical potential as an alternative to autogenous bone grafting.

Controlled release strategies for bone, cartilage, and osteochondral engineering--Part II: challenges on the evolution from single to multiple bioactive factor delivery

The development of controlled release systems for the regeneration of bone, cartilage, and osteochondral interface is one of the hot topics in the field of tissue engineering and regenerative medicine. However, the majority of the developed systems consider only the release of a single growth factor, which is a limiting step for the success of the therapy. More recent studies have been focused on the design and tailoring of appropriate combinations of bioactive factors to match the desired goals regarding tissue regeneration. In fact, considering the complexity of extracellular matrix and the diversity of growth factors and cytokines involved in each biological response, it is expected that an appropriate combination of bioactive factors could lead to more successful outcomes in tissue regeneration. In this review, the evolution on the development of dual and multiple bioactive factor release systems for bone, cartilage, and osteochondral interface is overviewed, specifically the relevance of parameters such as dosage and spatiotemporal distribution of bioactive factors. A comprehensive collection of studies focused on the delivery of bioactive factors is also presented while highlighting the increasing impact of platelet-rich plasma as an autologous source of multiple growth factors.

Mineralization content alters osteogenic responses of bone marrow stromal cells on hydroxyapatite/polycaprolactone composite nanofiber scaffolds

Synthetic tissue scaffolds have a high potential impact for patients experiencing osteogenesis imperfecta. Using electrospinning, tissue scaffolds composed of hydroxyapatite/polycaprolactone (HAp/PCL) composite nanofibers were fabricated with two different HAp concentrations—1% and 10% of the solid scaffold weight. After physico-chemical scaffold characterization, rat bone marrow stromal cells were cultured on the composite scaffolds in maintenance medium and then in osteogenic medium. Quantitative PCR, colorimetric assays, immunofluorescent labeling, and electron microscopy measured osteogenic cell responses to the HAp/PCL scaffolds. In maintenance conditions, both Hap/PCL scaffolds and control scaffolds supported cell colonization through seven days with minor differences. In osteogenic conditions, the 10% HAp scaffolds exhibited significantly increased ALP assay levels at week 3, consistent with previous reports. However, qPCR analysis demonstrated an overall decrease in bone matrix-associated genes on Hap/PCL scaffolds. Osteopontin and osteocalcin immunofluorescent microscopy revealed a trend that both mineralized scaffolds had greater amounts of both proteins, though qPCR results indicated the opposite trend for osteopontin. Additionally, type I collagen expression decreased on HAp scaffolds. These results indicate that cells are sensitive to minor changes in mineral content within nanofibers, even at just 1% w/w, and elucidating the sensing mechanism may lead to optimized osteogenic scaffold designs.

Axially vascularized bone substitutes: a systematic review of literature and presentation of a novel model

INTRODUCTION

The creation of axially vascularized bone substitutes (AVBS) has been successfully demonstrated in several animal models. One prototypical indication is bone replacement in patients with previously irradiated defect sites, such as in the mandibular region. The downside of current clinical practice, when free fibular or scapular grafts are used, is the creation of significant donor site morbidity.

METHODS

Based on our previous experiments, we extended the creation of an arterio-venous loop to generate vascularized bone substitutes to a new defect model in the goat mandibula. In this report, we review the literature regarding different models for axially vascularized bone substitutes and present a novel model demonstrating the feasibility of combining this model with synthetic porous scaffold materials and biological tissue adhesives to grow cells and tissue.

RESULTS

We were able to show the principal possibility to generate axially vascularized bony substitutes in vivo in goat mandibular defects harnessing the regenerative capacity of the living organism and completely avoiding donor site morbidity.

CONCLUSION

From our findings, we conclude that this novel model may well offer new perspectives for orthopedic and traumatic bone defects that might benefit from the reduction of donor site morbidity.

Growth factor delivery: how surface interactions modulate release in vitro and in vivo

Biomaterial scaffolds have been extensively used to deliver growth factors to induce new bone formation. The pharmacokinetics of growth factor delivery has been a critical regulator of their clinical success. This review will focus on the surface interactions that control the non-covalent incorporation of growth factors into scaffolds and the mechanisms that control growth factor release from clinically relevant biomaterials. We will focus on the delivery of recombinant human bone morphogenetic protein-2 from materials currently used in the clinical practice, but also suggest how general mechanisms that control growth factor incorporation and release delineated with this growth factor could extend to other systems. A better understanding of the changing mechanisms that control growth factor release during the different stages of preclinical development could instruct the development of future scaffolds for currently untreatable injuries and diseases.

Regenerative medicine: implications for craniofacial surgery

Craniofacial reconstruction of cases with complex anatomy challenges surgeons. The recently emerging field of tissue engineering and regenerative medicine has resulted in a variety of novel therapeutic concepts particularly in the craniofacial area. However, researchers still face significant problems when translating scientific concepts from the bench to the bedside. Reconstruction procedures depend on sustainability, aesthetic outcome, and functionality. Tissue engineering approaches yield powerful tools for long-term satisfying results enabling customized reconstruction and supporting natural healing processes. In conclusion, further advances of tissue-engineered reconstruction need multidisciplinary research to create complex tissue structures and make satisfactory outcomes clinically achievable for most patients. This review highlights clinical advances in the field and gives an overview about current scientific concepts.

Polycaprolactone–starch blends with corn-based coupling agent: physical properties and in vitro analysis

In an attempt to improve properties of polycaprolcatone–starch blend, this study uses zein as coupling agent in preparing the blend through a single-step process. Zein, which has affinity to both polar and non-polar groups, is expected to improve miscibility between the blends’ constituents and its overall biocompatibility. Mechanical properties of the blend were tested and further characterizations (Fourier transform infrared spectroscopy, thermal properties) were performed to analyze the effect of zein as an addition to the blend’s physical properties. The blend’s biocompatibility was examined by indirect methods (contact angle and weight gain after immersion in simulated body fluid) and in vitro analysis. No significant effect on the blend’s strength and stiffness was caused by adding zein. Hydrophilicity and cell affinity were improved when zein was added. Zein did not perform as a coupling agent that improved miscibility between polycaprolactone and starch, but its addition improved the blend’s biocompatibility.

Osteoblasts responses to three-dimensional nanofibrous gelatin scaffolds

The development of suitable scaffolds for bone tissue engineering requires an in-depth understanding of the interactions between osteoblasts and scaffolding biomaterials. Although there have been a large amount of knowledge accumulated on the cell-material interactions on two-dimensional (2D) planar substrates, our understanding of how osteoblasts respond to a biomimetic nanostructured three-dimensional (3D) scaffold is very limited. In this work, we developed an approach to use confocal microscopy as an effective tool for visualizing, analyzing, and quantifying osteoblast-matrix interactions and bone tissue formation on 3D nanofibrous gelatin scaffolds (3D-NF-GS). Integrin β1, phosphor-paxillin, and vinculin were used to detect osteoblasts responses to the nanofibrous architecture of 3D-NF-GS. Unlike osteoblasts cultured on 2D substrates, osteoblasts seeded on 3D-NF-GS showed less focal adhesions for phospho-paxillin and vinculin, and the integrin β1 was difficult to detect after the first 5 days. Bone sialoprotein (BSP) expression on the 3D-NF-GS was present mainly in the cell cytoplasm at 5 days and inside secretory vesicles at 2 weeks, whereas most of the BSP on the 2D gelatin substrates was concentrated either in cell interface toward the periphery or at focal adhesion sites. Confocal images showed that osteoblasts were able to migrate throughout the 3D matrix within 5 days. By 14 days, osteoblasts were organized as nodular aggregations inside the scaffold pores and a large amount of collagen and other cell secretions covered and remodeled the surfaces of the 3D-NF-GS. These nodules were mineralized and were uniformly distributed inside the entire 3D-NF-GS after being cultured for 2 weeks. Taken together, these results give insight into osteoblast-matrix interactions in biomimetic nanofibrous 3D scaffolds and will guide the development of optimal scaffolds for bone tissue engineering.

Enhanced cellular responses of human bone marrow stromal cells cultured on pretreated surface with allogenic platelet-rich plasma

The principal objective of this study was to evaluate the effects of surface pretreatment with platelet-rich plasma (PRP) on the cellular functions of human bone marrow stromal cells (hBMSCs). The surfaces of tissue culture plates (TCPs) were pretreated by adding PRP followed by centrifugation to bring platelets closer to the surface, followed by incubation for 60 min at 37°C. Then, hBMSCs were seeded onto TCP and TCP pretreated with PRP (TCP-PRP), followed by culture in osteogenic medium. Cell attachment, proliferation, and osteogenic differentiation were evaluated. Field emission scanning electron microscope (FE-SEM; JSM-7401F, JEOL Ltd., Japan) observations were conducted. The attachment of hBMSCs was significantly lower on TCP-PRP than on TCP. However, when the cell numbers were normalized with those observed on day 1 of culture, cellular proliferation on 5 days was significantly higher on TCP-PRP. Alkaline phosphatase activity, an index of early phase of osteoblastic differentiation, was significantly higher on TCP-PRP on day 14. Calcium deposition amount, an index of terminal osteoblastic differentiation, was also significantly higher on TCP-PRP on days 14 and 21. The results of von Kossa staining confirmed that, on day 21, the area of mineralized nodules was significantly larger on TCP-PRP. FE-SEM observation demonstrated that activated platelets and fibrin network covered the surface after PRP treatment. An increase in the number of hBMSCs and their cellular products was evident on the FE-SEM observation, and the fibrin network remained on day 21. Our results demonstrate that a PRP-treated surface enhanced early proliferation and late osteogenic differentiation of hBMSCs.

Scaffold translation: barriers between concept and clinic

Translation of scaffold-based bone tissue engineering (BTE) therapies to clinical use remains, bluntly, a failure. This dearth of translated tissue engineering therapies (including scaffolds) remains despite 25 years of research, research funding totaling hundreds of millions of dollars, over 12,000 papers on BTE and over 2000 papers on BTE scaffolds alone in the past 10 years (PubMed search). Enabling scaffold translation requires first an understanding of the challenges, and second, addressing the complete range of these challenges. There are the obvious technical challenges of designing, manufacturing, and functionalizing scaffolds to fill the Form, Fixation, Function, and Formation needs of bone defect repair. However, these technical solutions should be targeted to specific clinical indications (e.g., mandibular defects, spine fusion, long bone defects, etc.). Further, technical solutions should also address business challenges, including the need to obtain regulatory approval, meet specific market needs, and obtain private investment to develop products, again for specific clinical indications. Finally, these business and technical challenges present a much different model than the typical research paradigm, presenting the field with philosophical challenges in terms of publishing and funding priorities that should be addressed as well. In this article, we review in detail the technical, business, and philosophical barriers of translating scaffolds from Concept to Clinic. We argue that envisioning and engineering scaffolds as modular systems with a sliding scale of complexity offers the best path to addressing these translational challenges.

Bone tissue engineering in oral surgery: a new method of bone development in periodontal surgery

This article describes the development of a new surgical approach to periodontal treatment. Twenty patients who suffered from bone defects without existing bony walls due to adult periodontitis were treated in three different groups using methods of bone tissue engineering. At that time no surgical technique existed that could be applied to those patients to generate new bone. The periodontal surgeries were performed between 2004 and 2008. All patients received follow-up examinations at 6, 12, and 24 months after surgical procedure. Measured parameters were compared to baseline. The surgical approach and the augmentation material have been improved based on the results of the previous group. This strategy was applied because of the ethical fact that a medical treatment of patients has to be carried out with the knowledge and experience of previous settings. All groups received recombinant human bone morphogenetic protein 2 and platelet-rich plasma. The above-mentioned procedure had been approved in other indications in the field of oral and maxillofacial surgery. The first group underwent conventional muco-periosteal flap technique and obtained an augmentation with absorbable collagen sponge (ACS). The second and third groups were treated using endoscopically assisted microsurgery due to wound healing disturbances that appeared in the first group. The augmentation was carried out with demineralized bone matrix (DBM) instead of ACS (group 2) or tricalciumphosphate as a further development instead of DBM (group 3). The radiological control 12 months (group 1), 18 months (group 2), and 2 years (group 3) after surgery proved the following results-first group: 1.7 mm (average) vertical bone development (VBD); second group: 2.5 mm (average) VBD; third group: 3.2 mm (average) VBD. These results of single patient treatment open new ways into periodontal surgery. They have to be confirmed by prospective case series and multicenter studies.

Elastic properties of polycaprolactone at small strains are significantly affected by strain rate and temperature

Tensile tests were conducted on polycaprolactone at various strain rates and temperatures. Focusing on the mechanical properties within only the small-strain elastic region, i.e. up to the inflection point in the stress–strain diagram, it was found that strain rate and temperature had significant effects on the polymer. This finding implies that the effects of strain rate and temperature on the elastic properties of polycaprolactone should be considered in the design and manufacture of rigidity-sensitive, load-bearing applications, including use as biomaterial for scaffolds in tissue engineering applications.

Discontinuous release of bone morphogenetic protein-2 loaded within interconnected pores of honeycomb-like polycaprolactone scaffold promotes bone healing in a large bone defect of rabbit ulna

The choice of an appropriate carrier and its microarchitectural design is integral in directing bone ingrowth into the defect site and determining its subsequent rate of bone formation and remodeling. We have selected a three-dimensional polycaprolactone (PCL) scaffold with an interconnected honeycomb-like porous structure to provide a conduit for vasculature ingrowth as well as an osteoconductive pathway to guide recruited cells responding to a unique triphasic release of osteoinductive bone morphogenetic proteins (BMP) from these PCL scaffolds. We hypothesize that the use of recombinant human bone morphogenetic protein 2 (rhBMP2)-PCL constructs promotes rapid union and bone regeneration of a large defect. Results of our pilot study on a unilateral 15 mm mid-diaphyseal segmental rabbit ulna defect demonstrated enhanced bone healing with greater amount of bone formation and bridging under plain radiography and microcomputed tomography imaging when compared with an empty PCL and untreated group after 8 weeks postimplantation. Quantitative measurements showed significantly higher bone volume fraction and trabecular thickness, with lower trabecular separation in the rhBMP2-treated groups. Histology evaluation also revealed greater mature bone formation spanning across the entire scaffold region compared with other groups, which showed no bone regeneration within the central defect zone. We highlight that it is the uniqueness of the scaffold having a highly porous network of channels that promoted vascular integration and allowed for cellular infiltration, leading to a discontinuous triphasic BMP2 release profile that mimicked the release profile during natural repair mechanisms in vivo. This study serves as preclinical evidence demonstrating the potential of combining osteoinductive rhBMP2 with our PCL constructs for the repair of large defects in a large animal model.

The use of platelet rich plasma, bone morphogenetic protein-2 and different scaffolds in oral and maxillofacial surgery - literature review in comparison with own clinical experience

Objectives

The purpose of this article was to review and critically assess the use of platelet rich plasma, recombinant human bone morphogenetic protein-2 and different scaffolds (i.e. tricalciumphosphate, polycaprolactone, demineralized bone matrix and anorganic bovine bone mineral) in oral and maxillofacial surgery comparing the relevant literature and own clinical experience.

Material and Methods

A literature review was conducted using MEDLINE, MEDPILOT and COCHRANE DATABASE OF SYSTEMATIC REVIEWS. It concentrated on manuscripts and overviews published in the last five years (2006-2010). The key terms employed were platelet rich plasma, bone morphogenetic proteins and their combinations with the above mentioned scaffolds. The results of clinical studies and animal trials were especially emphasized. The statements from the literature were compared with authors’ own clinical data.

Results

New publications and overviews demonstrate the advantages of platelet rich plasma in bone regeneration. The results from the literature review were discussed and compared with the publications detailing authors' own experiences.

Conclusions

A favourable outcome concerning newly grown bone was achieved combining platelet rich plasma in addition to optimal matrices with or without recombinant human bone morphogenetic protein-2, depending on the clinical case. As a consequence, the paradigm shift from transplantation of autogenous bone to bone tissue engineering appears promising.