A Comparison of Bone Marrow and Cord Blood Mesenchymal Stem Cells for Cartilage Self-Assembly

A cell bank paradigm for preclinical evaluation of an analogous cellular product for an allogeneic cell therapy

Toward the translation of allogeneic cell therapy products, cell banks are needed not only to manufacture the final human product but also during the preclinical evaluation of an animal-based analogous cellular product (ACP). These cell banks need to be established at both the master cell bank (MCB) level and the working cell bank (WCB) level. Inasmuch as most of the development of cell therapy products is at academic centers, it is imperative that academic researchers understand how to establish MCBs and WCBs within an academic environment. To illustrate this process, using articular cartilage as the model, a cell bank for an ACP was developed (MCBs at passage 2, WCBs at passage 5) to produce self-assembled neocartilage for preclinical evaluation (constructs at passage 7). The cell bank system is estimated to be able to produce between 160 000 and 400 000 constructs for each of the six MCBs. Overall, the ACP cell bank yielded constructs that are analogous to the intended human product, which is critical toward conducting preclinical evaluations of the ACP for inclusion in an Investigational New Drug application to the FDA.

Human umbilical cord mesenchymal stem cells overexpressing RUNX1 promote tendon-bone healing by inhibiting osteolysis, enhancing osteogenesis and promoting angiogenesis

BACKGROUND

Rotator cuff injury (RCI) is a common shoulder injury, which is difficult to be completely repaired by surgery. Hence, new strategies are needed to promote the healing of tendon-bone.

OBJECTIVE

We aimed to investigate the effect of human umbilical cord mesenchymal stem cells (hUC-MSCs) overexpressing RUNX1 on the tendon-bone healing after RCI, and to further explore its mechanism.

METHODS

Lentiviral vector was used to mediate the overexpression of RUNX1. RUNX1-overexpressed UCB-MSCs (referred to as MSC-RUNX1) were co-cultured with osteoclasts, and TRAP staining was performed to observe the formation of osteoclasts. Then MSC-RUNX1 was cultured in osteogenic differentiation medium, Alizarin red staining was conducted to detect osteogenic differentiation. The expression of markers of osteogenesis and osteoclast was detected by RT-qPCR. EA. hy926 cells were co-cultured with MSC-RUNX1. Transwell assay was used to detect the migration, and the expression of angiogenesis related-genes VEGF and TGF-β was detected by RT-qPCR. The rat rotator cuff reconstruction model was established and MSCs were injected at the tendon-bone junction. Biomechanical test and micro-CT scanning were performed, and HE, Masson and Alcian Blue staining were used for histological evaluation of tendon-bone healing. TUNEL and PCNA immunofluorescence (IF) staining were performed to evaluate apoptosis and proliferation at the tendon-bone healing site. The levels of TNF-α, IL-6 and IL-8 in serum were detected by ELISA. The expression of CD31 and Endomucin that related to angiogenesis was detected by IF. Safranin O-fast and TRAP/CD40L immunohistochemical staining were used to assess the levels of osteoclasts and osteoblasts at the tendon-bone healing site.

RESULTS

hUC-MSCs overexpressing RUNX1 inhibited osteoclast formation and promoted osteogenic differentiation. MSC-RUNX1 could promote the migration and tube formation of EA. hy926 cells, and up-regulate the levels of VEGF and TGF-β. Model mice treated with MSC-RUNX1 partially restored the biomechanical indexes. Treatment of MSC-RUNX1 obviously increased the bone density, accompanied by the formation of new bone. In vivo experiments showed that MSC-RUNX1 treatment could promote tendon-bone healing and inhibit inflammatory response in rats. MSC-RUNX1 treatment also promoted angiogenesis at the tendon-bone healing site, while inhibiting osteoclast formation and promoting osteogenic differentiation.

CONCLUSION

hUC-MSCs overexpressing RUNX1 can inhibit the formation of osteoclasts and differentiation of osteoblasts, promote angiogenesis and inhibit inflammation, thereby promoting tendon-bone healing after RCI.

The Developing Field of Scaffold-Free Tissue Engineering for Articular Cartilage Repair

Articular cartilage is critical for proper joint mobility as it provides a smooth and lubricated surface between articulating bones and allows for transmission of load to underlying bones. Extended wear or injury of this tissue can result in osteoarthritis, a degenerative disease affecting millions across the globe. Because of its low regenerative capacity, articular cartilage cannot heal on its own and effective treatments for injured joint restoration remain a challenge. Strategies in tissue engineering have been demonstrated as potential therapeutic approaches to regenerate and repair damaged articular cartilage. Although many of these strategies rely on the use of an exogenous three-dimensional scaffolds to regenerate cartilage, scaffold-free tissue engineering provides numerous advantages over scaffold-based methods. This review highlights the latest advancements in scaffold-free tissue engineering for cartilage and the potential for clinical translation.

Synthesis of scaffold-free, three dimensional, osteogenic constructs following culture of skeletal osteoprogenitor cells on glass surfaces

BACKGROUND

Efficient differentiation of stem cells into three-dimensional (3D) osteogenic construct is still an unmet challenge. These constructs can be crucial for patients with bone defects due to congenital or traumatic reasons. The modulation of cell fate and function as a consequence of interaction with the physical and chemical properties of materials is well known.

METHODS

The current study has examined the osteogenic differentiation potential of human skeletal populations following culture on glass surfaces, as a monolayer, or in glass tubes as a pellet culture. The 3D prosperities were assessed morphometrically and the differentiation was evaluated through molecular characterization as well as matrix formation.

RESULTS

Early temporal expression of alkaline phosphatase expression of skeletal populations was observed following culture on glass surfaces. Skeletal populations seeded on glass tubes, adhered as a monolayer to the tube base and subsequently formed 3D pellets at the air -media interface. The pellets cultured on glass displayed 4.9 ± 1.3 times the weight and 2.9 ± 0.1 the diameter of their counterpart cultured in plastic tubes and displayed enhanced production of osteogenic matrix proteins, such a collagen I and osteonectin. The size and weight of the pellets correlated with surface area in contrast to cell numbers seeded. Global DNA methylation level was decreased in pellets cultured on glass. In contrast, gene expression analysis confirmed upregulation extracellular matrix proteins and osteogenesis-related growth factors.

CONCLUSION

This simple approach to the culture of skeletal cells on glass tubes provides a scaffold-free, 3D construct platform for generating pellets enabling analysis and evaluation of tissue development and integration of multiple constructs with implications for tissue repair and regenerative application on scale-up.

Chondrogenic potential of mesenchymal stem cells from horses using a magnetic 3D cell culture system

BACKGROUND

Mesenchymal stem cells (MSCs) represent a promising therapy for the treatment of equine joint diseases, studied due to their possible immunomodulatory characteristics and regenerative capacity. However, the source of most suitable MSCs for producing cartilage for regenerative processes in conjunction with biomaterials for an enhanced function is yet to be established.

AIM

To compare the chondrogenicity of MSCs derived from synovial fluid, bone marrow, and adipose tissue of horses, using the aggrecan synthesis.

METHODS

MSCs from ten horses were cultured, phenotypic characterization was done with antibodies CD90, CD44 and CD34 and were differentiated into chondrocytes. The 3D cell culture system in which biocompatible nanoparticles consisting of gold, iron oxide, and poly-L-lysine were added to the cells, and they were forced by magnets to form one microspheroid. The microspheroids were exposed to a commercial culture medium for 4 d, 7 d, 14 d, and 21 d. Proteoglycan extraction was performed, and aggrecan was quantified by enzyme-linked immunosorbent assay. Keratan sulfate and aggrecan in the microspheroids were identified and localized by immunofluorescence.

RESULTS

All cultured cells showed fibroblast-like appearance, the ability to adhere to the plastic surface, and were positive for CD44 and CD90, thus confirming the characteristics and morphology of MSCs. The soluble protein concentrations were higher in the microspheroids derived from adipose tissue. The aggrecan concentration and the ratio of aggrecan to soluble proteins were higher in microspheroids derived from synovial fluid than in those derived from bone marrow, thereby showing chondrogenic superiority. Microspheroids from all sources expressed aggrecan and keratan sulfate when observed using confocal immunofluorescence microscopy. All sources of MSCs can synthesize aggrecan, however, MSCs from synovial fluid and adipose tissue have demonstrated better biocompatibility in a 3D environment, thus suggesting chondrogenic superiority.

CONCLUSION

All sources of MSCs produce hyaline cartilage; however, the use of synovial liquid or adipose tissue should be recommended when it is intended for use with biomaterials or scaffolds.

Chondrogenic and BMP-4 primings confer osteogenesis potential to human cord blood mesenchymal stromal cells delivered with biphasic calcium phosphate ceramics

Bone marrow mesenchymal stem/stromal cells (BMSCs) show great promise for bone repair, however they are isolated by an invasive bone marrow harvest and their regenerative potential decreases with age. Conversely, cord blood can be collected non-invasively after birth and contains MSCs (CBMSCs) that can be stored for future use. However, whether CBMSCs can replace BMSCs targeting bone repair is unknown. This study evaluates the in vitro osteogenic potential of unprimed, osteogenically primed, or chondrogenically primed CBMSCs and BMSCs and their in vivo bone forming capacity following ectopic implantation on biphasic calcium phosphate ceramics in nude mice. In vitro, alkaline phosphatase (intracellular, extracellular, and gene expression), and secretion of osteogenic cytokines (osteoprotegerin and osteocalcin) was significantly higher in BMSCs compared with CBMSCs, while CBMSCs demonstrated superior chondrogenic differentiation and secretion of interleukins IL-6 and IL-8. BMSCs yielded significantly more cell engraftment and ectopic bone formation compared to CBMSCs. However, priming of CBMSCs with either chondrogenic or BMP-4 supplements led to bone formation by CBMSCs. This study is the first direct quantification of the bone forming abilities of BMSCs and CBMSCs in vivo and, while revealing the innate superiority of BMSCs for bone repair, it provides avenues to induce osteogenesis by CBMSCs.

Chondrogeneic Potential of MSC from Different Sources in Spheroid Culture

We performed a comparative study of the proliferative potential of human mesenchymal stromal cells (MSC) from three sources (tooth pulp, adipose tissue, and Wharton's jelly) in spheroid culture; human chondroblasts served as the positive control. Histological examination revealed signs of chondrogenic differentiation in all studied cell cultures and the differences in the volume and composition of the extracellular matrix. Spheroids formed by MSC from the tooth pulp and Wharton's jelly were characterized by low content of extracellular matrix and glycosaminoglycans. Spheroids from adipose tissue MSC contained maximum amount of the extracellular matrix and high content of glycosaminoglycans. Chondrocytes produced glycosaminoglycan-enriched matrix. Type II collagen was produced by chondrocytes (to a greater extent) and adipose tissue MSC (to a lesser extent). The results of our study demonstrate that MSC from the adipose tissue under conditions of spheroid culturing exhibited maximum chondrogenic potential.

Comparison of the Chondrogenic Potential of Mesenchymal Stem Cells Derived from Bone Marrow and Umbilical Cord Blood Intended for Cartilage Tissue Engineering

Osteoarthritis (OA) remains incurable in humans or horses and mesenchymal stromal/stem cells (MSCs) represent an attractive solution for producing a neocartilage substitute. However, the best MSC source still needs to be identified. This study compared the chondrogenic potential of equine MSCs derived from bone marrow (BM) and umbilical cord blood (UCB), at their undifferentiated status to check if one cell source is better proned, and after chondrogenic-induced differentiation. Chondrogenesis was induced by culture in collagen scaffold with BMP-2 + TGF-ß1 in hypoxia or normoxia. MSCs chondrogenic potential was evaluated using the mRNA and corresponding protein levels for osteogenic, hypertrophic and chondrogenic markers. MSCs characterization demonstrated that BM- and UCB-MSCs differ in proliferation and tripotencies. At undifferentiated status, they also showed differences in their expression of osteogenic, chondrogenic and hypertrophic markers. Upon chondrogenesis induction, both MSCs sources exhibited increased chondrogenic expression and produce an extracellular matrix (ECM) of better quality in hypoxia, although collagen I remained expressed. UCB-MSCs produced higher amounts of collagen II, particularly its IIB isoform, than BM-MSCs, but also collagen I and Htra1, regardless of the oxygen condition. Finally, immunohistochemistry revealed that the BM-MSCs synthesized an ECM of higher quality, regarding the more homogenous distribution of type IIB collagen, compared to UCB-MSCs. Considering collagen I as the major undesirable component in the neo-synthesis of in vitro cartilage, we recommend using BM-MSCs for horse cartilage engineering.

Comparison of the therapeutic effect of amniotic fluid stem cells and their exosomes on monoiodoacetate-induced animal model of osteoarthritis

The cartilage tissue engineering associated with stem cell-related therapies is becoming very interesting since adult articular cartilage has limited intrinsic capacity for regeneration upon injury. Amniotic fluid stem cells (AFSC) have been shown to produce exosomes with growth factors and immunomodulating molecules that could stop tissue degradation and induce cartilage repair. Based on this state of the art, the main aim of this study was to explore the efficacy of the secreted exosomes, compared to their AFSC source, in MIA-induced animal model of osteoarthritis mimicking a chronic and degenerative process, where inflammation is also involved and lead to irreversible joint damage. Exosomes, obtained by the use of a commercial kit, prior to the injection in animal knee joints, were characterized for the presence of typical markers and HGF, TGFβ, and IDO. Then, analyses were performed by histology, immunohistochemistry, and behavioral scoring up to 3 weeks after the treatment. Exosome-treated defects showed enhanced pain tolerance level and improved histological scores than the AFSC-treated defects. Indeed by 3 weeks, TGFβ-rich exosome samples induced an almost complete restoration of cartilage with good surface regularity and with the characteristic of hyaline cartilage. Moreover, cells positive for resolving macrophage marker were more easily detectable into exosome-treated joints. Therefore, a modulating role for exosomes on macrophage polarization is conceivable, as demonstrated also by experiments performed on THP1 macrophages. In conclusion, this study demonstrates for the first time the efficacy of human AFSC exosomes in counteract cartilage damage, showing a positive correlation with their TGFβ content.

Progress in Articular Cartilage Tissue Engineering: A Review on Therapeutic Cells and Macromolecular Scaffolds

Repair and regeneration of articular cartilage lesions have always been a major challenge in the medical field due to its peculiar structure (e.g., sparsely distributed chondrocytes, no blood supply, no nerves). Articular cartilage tissue engineering is considered as one promising strategy to achieve reconstruction of cartilage. With this perspective, the articular cartilage tissue engineering has been widely studied. Here, the recent progress of articular cartilage tissue engineering is reviewed. The ad hoc therapeutic cells and growth factors for cartilage regeneration are summarized and discussed. Various types of bio/macromolecular scaffolds together with their pros and cons are also reviewed and elaborated.

Challenges and Controversies in Human Mesenchymal Stem Cell Therapy

Stem cell therapy is being intensely investigated within the last years. Expectations are high regarding mesenchymal stem cell (MSC) treatment in translational medicine. However, many aspects concerning MSC therapy should be profoundly defined. Due to a variety of approaches that are investigated, potential effects of stem cell therapy are not transparent. On the other hand, most results of MSC administration in vivo have confirmed their safety and showed promising beneficial outcomes. However, the therapeutic effects of MSC-based treatment are still not spectacular and there is a potential risk related to MSC applications into specific cell niche that should be considered in long-term observations and follow-up outcomes. In this review, we intend to address some problems and critically discuss the complex nature of MSCs in the context of their effective and safe applications in regenerative medicine in different diseases including graft versus host disease (GvHD) and cardiac, neurological, and orthopedic disorders.

Equine Cord Blood Mesenchymal Stromal Cells Have Greater Differentiation and Similar Immunosuppressive Potential to Cord Tissue Mesenchymal Stromal Cells

Mesenchymal stromal cells (MSCs) are the most common cell population studied for therapeutic use in veterinary medicine. MSCs obtained from neonatal sources such as umbilical cord tissue (CT-MSCs) or cord blood (CB-MSCs) are appealing due to the non-invasive nature of procurement and the time allowed for characterization of cells before use. However, it remains unclear as to whether CB- or CT-MSCs have equivalent progenitor and non-progenitor functions. CB-MSCs have been shown to have superior chondrogenic potential to MSCs from other sources, whereas their immunomodulatory capacity does not seem to vary significantly. Using equine CB-MSCs and CT-MSCs from the same donors, we hypothesized that MSCs from both sources would have a similar immunophenotype, that CB-MSCs would be more amenable to differentiation, and that they can equally suppress lymphocyte proliferation. We evaluated cells from both sources for "classic" equine MSC markers CD90, CD105, CD29, and CD44, as well as pericyte markers CD146, NG2, and α-SMA. Contrary to our hypothesis, CB-MSCs showed mid- to high expression of pericyte surface markers CD146 and NG2, whereas expression in CT-MSCs was absent. On trilineage differentiation, CB-MSCs were more osteogenic and chondrogenic based on alkaline phosphatase activity and glycosaminoglycan content, respectively. Finally, using a mononuclear cell (MNC) suppression assay, we determined that both CB-MSCs and CT-MSCs are capable of suppressing stimulated MNC proliferation to a similar degree. We have determined that the choice of MSC tissue source should be made with the intended application in mind. This appears to be particularly relevant if pursuing a progenitor-based treatment strategy.

Enhancement in sustained release of antimicrobial peptide and BMP-2 from degradable three dimensional-printed PLGA scaffold for bone regeneration

One of the goals of bone tissue engineering is to create scaffolds with well-defined, inter-connected pores, excellent biocompatibility and osteoinductive ability. Three-dimensional (3D)-printed polymer scaffold coated with bioactive peptide are an effective approach to fabricating ideal bone tissue engineering scaffolds for bone defect repair. However, the current strategy of adding bioactive peptides generally cause degradation to the polymer materials or damage the bioactivity of the biomolecules. Thus, in this study, we used a biomimetic process via poly(dopamine) coating to prepare functional 3D PLGA porous scaffolds with immobilized BMP-2 and ponericin G1 that efficiently regulate the osteogenic differentiation of preosteoblasts (MC3T3-E1) and simultaneously inhibit of pathogenic microbes, thereby enhancing biological activity. In this study, we analysed a 3D PLGA porous scaffold by scanning electron microscopy, water contact angle measurements, and materials testing. Subsequently, we examined the adsorption, release and in vitro antimicrobial activity of the 3D PLGA. Surface characterization showed that poly(dopamine) surface modification could more efficiently mediate the immobilization of BMP-2 and ponericin G1 onto the scaffold surfaces than physical adsorption, and that ponericin G1-immobilized 3D PLGA scaffolds were able to maintain long-term antibacterial activity. We evaluated the influence on cell adhesion, proliferation and differentiation by culturing MC3T3-E1 cells on different modified 3D PLGA scaffolds in vitro. The biological results indicate that MC3T3-E1 cell attachment and proliferation on BMP-2/ponericin G1-immobilized 3D PLGA scaffolds were much higher than those on other groups. Calcium deposition, and gene expression results showed that the osteogenic differentiation of cells was effectively improved by loading the 3D PLGA scaffold with BMP-2 and ponericin G1. In summary, our findings indicated that the polydopamine-assisted surface modification method can be a useful tool for grafting biomolecules onto biodegradable implants, and the dual release of BMP-2 and ponericin G1 can enhance the osteointegration of bone implants and simultaneously inhibit of pathogenic microbes. Therefore, we conclude that the BMP-2/ponericin G1-loaded PLGA 3D scaffolds are versatile and biocompatible scaffolds for bone tissue engineering.

One of the goals of bone tissue engineering is to create scaffolds with well-defined, inter-connected pores, excellent biocompatibility and osteoinductive ability.

Considerations for translation of tissue engineered fibrocartilage from bench to bedside

Fibrocartilage is found in the knee meniscus, the temporomandibular joint (TMJ) disc, the pubic symphysis, the annulus fibrosus of intervertebral disc, tendons, and ligaments. These tissues are notoriously difficult to repair due to their avascularity, and limited clinical repair and replacement options exist. Tissue engineering has been proposed as a route to repair and replace fibrocartilages. Using the knee meniscus and TMJ disc as examples, this review describes how fibrocartilages can be engineered toward translation to clinical use. Presented are fibrocartilage anatomy, function, epidemiology, pathology, and current clinical treatments because they inform design criteria for tissue engineered fibrocartilages. Methods for how native tissues are characterized histomorphologically, biochemically, and mechanically to set gold standards are described. Then, provided is a review of fibrocartilage-specific tissue engineering strategies, including the selection of cell sources, scaffold or scaffold-free methods, and biochemical and mechanical stimuli. In closing, the Food and Drug Administration paradigm is discussed to inform researchers of both the guidance that exists and the questions that remain to be answered with regard to bringing a tissue engineered fibrocartilage product to the clinic.