Biological and Mechanical Factors Promote the Osteogenesis of Rabbit Artificial Vertebral Laminae: A Comparison Study

Physiologic Osseous Remodeling of the Anterior Wall of the Spinal Canal after Anterior Cervical Corpectomy and Fusion: A Retrospective Observational Study

BACKGROUND

 Anterior cervical corpectomy and fusion (ACCF) has been widely used in the treatment of cervical spondylotic myelopathy (CSM), ossification of posterior longitudinal ligament (OPLL), cervical trauma, and other cervical diseases, but few studies have reported the osseous and physiologic remodeling of the anterior wall of the spinal canal following ACCF. In this study, we analyze that remodeling process and its influence on titanium mesh cage (TMC) subsidence.

METHODS

 We performed a clinical and radiologic analysis of consecutive patients treated with ACCF. Growth rates (GRs) reflecting the extent of remodeling of the remnants of the resected vertebral bodies were measured. We compared the computed tomography (CT) scans taken immediately and at least 1 year after surgery, and a literature review was conducted.

RESULTS

 In all, 48 patients underwent ACCF at a mean age of 61.5 ± 12.0 years. The median follow-up was 36 months, and 159 CT images were analyzed. The GR values of the remnants of the vertebral bodies on CT images immediately and 1 year after surgery were 0.505 ± 0.077 and 0.650 ± 0.022 (p < 0.001), respectively, and the GR value at ≥4 years was 1. Axial CT scans showed that remodeling starts from the lateral remnants of the resected vertebral bodies, finally reaching the center. When fusion of the vertebral bodies and the titanium cage was complete during the first year after ACCF, osteogenesis and remodeling were initiated in the osseous anterior wall of the spinal canal. The remodeling of the osseous anterior wall of the spinal canal was completed at the fourth year after surgery, without recompressing the spinal cord, as seen on both axial and lateral CT scans. According to the literature review, there was no TMC subsidence at more than 4 years after surgery.

CONCLUSION

 The anterior wall of the spinal canal undergoes osseous remodeling after ACCF. The process is complete in the fourth year after surgery and prevents TMC subsidence.

Exosomal miR-423-5p Derived from Cerebrospinal Fluid Pulsation Stress-Stimulated Osteoblasts Improves Angiogenesis of Endothelial Cells via DUSP8/ERK1/2 Signaling Pathway

Exosomes secreted from osteoblasts (OBs) can regulate the angiogenesis of endothelial cells (ECs); however, whether cerebrospinal fluid pulsation (CSFP) stress, a special mechanical stimulation, can influence the cell's communication in the context of angiogenesis remains unknown. In this study, the effect of exosomes derived from CSFP stress-stimulated OBs on facilitating the angiogenesis of ECs was investigated. First, OBs were cultured in a CSFP bioreactor, and exosomes derived from OBs were isolated and identified. Cell Counting Kit 8 assay, transwell migration assay, wound healing migration assay, and tube formation assay were conducted to assess the effects of CSFP stress-stimulated OBs-derived exosomes (CSFP-Exos) on the angiogenesis of ECs. Then high-throughput RNA sequencing was used to determine the miRNA profiles of Non-CSFP stress-stimulated OBs-derived exosomes (NCSFP-Exos) and CSFP-Exos, and the luciferase reporter gene assay was performed to confirm the binging of miR-423-5p to DUSP8. In addition, the Matrigel plug assay was performed to explore whether exosomal miR-423-5p has the same effects in vivo. Our results suggested that CSFP-Exos can promote the angiogenesis of ECs, and miR-423-5p was enriched in CSFP-Exos. Moreover, miR-423-5p could promote the effect of angiogenesis via directly targeting dual-specificity phosphatase 8 (DUSP8), which inhibited the ERK1/2 signaling pathway. In conclusion, exosomal miR-423-5p derived from CSFP stress-stimulated OBs could promote the angiogenesis of ECs by the DUSP8/ERK1/2 signaling pathway.

Artificial lamina after laminectomy: Progress, applications, and future perspectives

In clinical practice, laminectomy is a commonly used procedure for spinal decompression in patients suffering from spinal disorders such as ossification of ligamentum flavum, lumbar stenosis, severe spinal fracture, and intraspinal tumors. However, the loss of posterior column bony support, the extensive proliferation of fibroblasts and scar formation after laminectomy, and other complications (such as postoperative epidural fibrosis and iatrogenic instability) may cause new symptoms requiring revision surgery. Implantation of an artificial lamina prosthesis is one of the most important methods to avoid post-laminectomy complications. Artificial lamina is a type of synthetic lamina tissue made of various materials and shapes designed to replace the resected autologous lamina. Artificial laminae can provide a barrier between the dural sac and posterior soft tissues to prevent postoperative epidural fibrosis and paravertebral muscle compression and provide mechanical support to maintain spinal alignment. In this paper, we briefly review the complications of laminectomy and the necessity of artificial lamina, then we review various artificial laminae from clinical practice and laboratory research perspectives. Based on a combination of additive manufacturing technology and finite element analysis for spine surgery, we propose a new designing perspective of artificial lamina for potential use in clinical practice.

Reconstruction of Epidural Fat to Prevent Epidural Fibrosis After Laminectomy in Rabbits

Background: Laminectomy can effectively decompress the spinal cord and expand the vertebral canal. However, the fibrosis that appears may cause adherence and recompression of the spinal cord or/and nerve root, which may cause failed back syndrome (FBS) and make the reexposure process more difficult. Reconstruction of the epidural fat may be an ideal method to achieve satisfactory results. Methods: Thirty-six New Zealand rabbits were randomly divided into three groups: control, extracellular matrix (ECM), and ECM+aMSCs groups. Saline, ECM gel, and ECM+aMSC complex were placed, respectively, at the fifth lumbar vertebrate of the rabbits. Epidural fat and fibrosis formation were detected by magnetic resonance imaging (MRI) and histologically at the 4th, 8th, and 12th weeks. Quantitative RT-PCR was used to detect the expression of interleukin 6 (IL-6) and transforming growth factor β (TGF-β). Results: MRI and Oil Red O staining revealed epidural fat formation at the 12th week in the ECM+aMSCs group. Hematoxylin and eosin staining showed that the numbers of fibroblasts in the ECM gel and ECM+aMSCs groups were less than the control group at the 4th and 8th weeks (p < 0.05). Masson's trichrome staining showed that the proportion of collagen fibers in the ECM gel and ECM+aMSCs group was lower than the control group (p < 0.05). Quantitative RT-PCR showed the expressions of TGF-β and IL-6 were lower in the ECM gel and ECM+aMSCs group than those in the control group (p < 0.05) at the 4th week, but higher at the 8th week. Conclusion: We successfully reconstructed the epidural fat with ECM gel and aMSC complex; additionally, IL-6 and TGF-β cytokines were lower at early stage after laminectomy.

Wnt/β-Catenin Pathway Balances Scaffold Degradation and Bone Formation in Tissue-Engineered Laminae

Tissue engineering provides a promising way for the regeneration of artificial vertebral laminae. Previous studies have confirmed the feasibility of reconstructing vertebral laminae via hydroxyapatite-collagen I scaffolds and mesenchymal stromal cells. However, there were no studies exploring the degradation of hydroxyapatite-collagen I scaffolds and the function of Wnt/β-catenin pathway in the process. In this study, tissue-engineered laminae (TEL) were constructed by nanohydroxyapatite/collagen I scaffolds and umbilical cord Wharton's Jelly mesenchymal stromal cells (WJ-MSCs). Cell attachment was observed by scanning electron microscopy, and cell viability was confirmed by Live/Dead staining. The rat models were randomly divided into control and β-catenin inhibition groups. Vertebral lamina defect rat models were made on the fifth lumbar vertebrate, and TEL was implanted into the defect site. After 14 weeks, the newborn laminae were harvested for microcomputed tomography, histology, or transcriptional profile analysis. We found that, for the control group, the newborn lamina formation matched with the scaffold degradation and complete newborn laminae formed at the 14th week; for the β-catenin inhibition group, the scaffold degradation rate overrated the lamina formation and no complete artificial laminae were formed at the 14th week. In addition, the osteoclastic genes, such as Cathepsin K or RANKL, in the control groups were significantly lower than the β-catenin inhibition group, and the antiosteoclastic gene, OPG, in the control group was significantly higher than the β-catenin inhibition group. In conclusion, inhibition of Wnt/β-catenin pathway led to speedy scaffold degradation and deferred artificial lamina formation. Wnt/β-catenin pathway played a critical role in maintaining the balance between scaffold degradation and bone formation in the process of vertebral lamina reconstruction.

Cyclic pulsation stress promotes bone formation of tissue engineered laminae through the F-actin/YAP-1/β-Catenin signaling axis

Mechanical loads are fundamental regulators of bone formation and remodeling. However, the molecular regulation of mechanotransduction during vertebral laminae regeneration remains poorly understood. Here, we found that cerebrospinal fluid pulsation (CSFP) stress—cyclic pulsation stress—could promote the osteogenic and angiogenic abilities of rat mesenchymal stromal cells (MSC), thereby promoting tissue-engineered laminae’s bone and blood vessel formation. In the process, F-actin relayed CSFP stress to promote the nuclear translocation of YAP1, which then decreased the degradation and promoted the nuclear translocation of β-Catenin. In turn, the nuclear translocation of β-Catenin promoted the osteogenic differentiation and angiogenic abilities of MSC, thereby promoting tissue-engineered laminae’s bone and blood vessel formation. Thus, we conclude that CSFP promotes the osteogenesis and angiogenesis of tissue-engineered laminae through the F-actin/YAP-1/β-Catenin signaling axis. This study advances our understanding of vertebral laminae regeneration and provides potential therapeutic approaches for spinal degeneration after spinal laminectomy.

SDF-1α/OPF/BP Composites Enhance the Migrating and Osteogenic Abilities of Mesenchymal Stem Cells

In situ cell recruitment is a promising regenerative medicine strategy with the purpose of tissue regeneration without stem cell transplantation. This chemotaxis-based strategy is aimed at ensuring a restorative environment through the release of chemokines that promote site-specific migration of healing cell populations. Stromal cell-derived factor-1α (SDF-1α) is a critical chemokine that can regulate the migration of mesenchymal stem cells (MSCs). Accordingly, here, SDF-1α-loaded microporous oligo[poly(ethylene glycol) fumarate]/bis[2-(methacryloyloxy)ethyl] phosphate composites (SDF-1α/OPF/BP) were engineered and probed. SDF-1α/OPF/BP composites were loaded with escalating SDF-1α concentrations, namely, 0 ng/ml, 50 ng/ml, 100 ng/ml, and 200 ng/ml, and were cocultured with MSC. Scratching assay, Transwell assay, and three-dimensional migration model were utilized to assess the migration response of MSCs. Immunofluorescence staining of Runx2 and osteopontin (OPN), ELISA assay of osteocalcin (OCN) and alkaline phosphatase (ALP), and Alizarin Red S staining were conducted to assess the osteogenesis of MSCs. All SDF-1α/OPF/BP composites engendered a release of SDF-1α (>80%) during the first four days. SDF-1α released from the composites significantly promoted migration and osteogenic differentiation of MSCs documented by upregulated expression of osteogenic-related proteins, ALP, Runx2, OCN, and OPN. SDF-1α at 100 ng/ml was optimal for enhanced migration and osteogenic proficiency. Thus, designed SDF-1α/OPF/BP composites were competent in promoting the homing and osteogenesis of MSCs and thus offer a promising bioactive scaffold candidate for on-demand bone tissue regeneration.

Mesenchymal stem cell spheroids incorporated with collagen and black phosphorus promote osteogenesis of biodegradable hydrogels

Mesenchymal stem cell (MSC)-spheroids have sparked significant interest in bone tissue engineering due to their resemblance to natural bone tissue, especially in terms of cell-cell and cell-extracellular matrix interactions. Many biomaterials or biomolecules have been incorporated into MSC-spheroids to enhance their osteogenic abilities. In this respect, we assessed the osteogenic responses of MSC spheroids leveraged through the unique combination of collagen and black phosphorus (BP). The MSC spheroids were successfully constructed with 6 μg/mL collagen and/or a concentration gradient (0 μg/mL, 4 μg/mL, 8 μg/mL, and 16 μg/mL) of BP and were evaluated for MSC viability and their osteogenic differentiation over a time period of 14 days. Improved MSC viability and osteogenic ability were observed for the spheroids with collagen and BP at the concentration of 4 μg/mL and 8 μg/mL. Next, blank spheroids (Control) or the optimized MSC spheroids with 6 μg/mL collagen and 4 μg/mL BP (Col+BP4) were further encapsulated into two types of hydrogel scaffolds: porous oligo[poly(ethylene glycol) fumarate] (OPF) hydrogel and hydroxyapatite-collagen I scaffold (HE-COL). The osteogenic abilities of these four groups were evaluated after 14 and 21 days of osteogenic induction. The MSC spheroids incorporated with collagen and BP implanted into OPF porous hydrogel (Col+BP/OPF) elicited a higher expression of Runx2, osteopontin, and alkaline phosphatase than blank spheroids implanted into OPF porous hydrogel (Control/OPF). Enhanced osteogenesis was also observed in the Col+BP/HE-COL group as compared to Control/HE-COL. Taken together, the results from this study showed the perspectives of collagen and BP incorporated MSC spheroids for the development of injectable cellular therapies for bone regeneration.

Comparative analysis of mesenchymal stromal cells derived from rabbit bone marrow and Wharton's jelly for adipose tissue engineering

Purpose: To investigate the proliferative, adipogenic, and immunological properties of rabbit Mesenchymal stromal cells (MSCs) derived from bone marrow and umbilical cord Wharton's jelly.Materials and Methods: We extracted rabbit MSCs from bone marrow (BMSCs) and umbilical cord Wharton's jelly (WJ-MSCs). Both BMSCs and WJ-MSCs underwent adipogenic differentiation for 2 weeks, and then were transferred to non-inductive complete medium. Their adipogenic capacities were examined by histomorphometry and quantitative RT-PCR (qRT-PCR). The immunological markers were determined by mRNA expression of MHC-Ia, MHC-II, and RLA-DRA by qRT-PCR and protein expression of MHC-II by immunofluorescent staining. The proliferative capacities of adipogenic MSCs were also examined by counting kit-8 experiment and cell population doubling time.Results: We found that adipogenic differentiation increased the mRNA expression levels of adipogenic and immunological markers. The protein expression levels of MHC-II also increased after adipogenic differentiation in both groups. The adipogenic BMSCs showed higher mRNA expression levels of adipogenic and immunological markers. Removal of adipogenic agents after 2 weeks of adipo-differentiation inversely decreased the expression of immunological and adipogenic markers. The adipo-differentiation could decreased the proliferative capacities of both MSCs, but the adipogenic WJ-MSCs showed significantly higher proliferative capacities than BMSCs.Conclusions: Adipogenic differentiation increased the immunogenicity of both BMSCs and WJ-MSCs, and dedifferentiation inversely decreased their immunogenicity. Adipogenic WJ-MSCs showed significantly higher proliferative and immunoprivileged capacities than BMSCs, and the dedifferentiated BMSCs showed almost the same adipogenic capacity as WJ-MSCs. WJ-MSCs were more suitable than BMSCs for adipose tissue engineering.

Cerebrospinal Fluid Pulsation Stress Promotes the Angiogenesis of Tissue-Engineered Laminae

Background

Angiogenesis is a prerequisite step to achieve the success of bone regeneration by tissue engineering technology. Previous studies have shown the role of cerebrospinal fluid pulsation (CSFP) stress in the reconstruction of tissue-engineered laminae. In this study, we investigated the role of CSFP stress in the angiogenesis of tissue-engineered laminae.

Methods

For the in vitro study, a CSFP bioreactor was used to investigate the impact of CSFP stress on the osteogenic mesenchymal stem cells (MSCs). For the in vivo study, forty-eight New Zealand rabbits were randomly divided into the CSFP group and the Non-CSFP group. Tissue-engineered laminae (TEL) was made by hydroxyapatite-collagen I scaffold and osteogenic MSCs and then implanted into the lamina defect in the two groups. The angiogenic and osteogenic abilities of newborn laminae were examined with histological staining, qRT-PCR, and radiological analysis.

Results

The in vitro study showed that CSFP stress could promote the vascular endothelial growth factor A (VEGF-A) expression levels of osteogenic MSCs. In the animal study, the expression levels of angiogenic markers in the CSFP group were higher than those in the Non-CSFP group; moreover, in the CSFP group, their expression levels on the dura mater surface, which are closer to the CSFP stress stimulation, were also higher than those on the paraspinal muscle surface. The expression levels of osteogenic markers in the CSFP group were also higher than those in the Non-CSFP group.

Conclusion

CSFP stress could promote the angiogenic ability of osteogenic MSCs and thus promote the angiogenesis of tissue-engineered laminae. The pretreatment of osteogenic MSC with a CSFP bioreactor may have important implications for vertebral lamina reconstruction with a tissue engineering technique.