Three-Dimensional Printed Design of Antibiotic-Releasing Esophageal Patches for Antimicrobial Activity Prevention

Development and characterization of Polycaprolactone/chitosan-based scaffolds for tissue engineering of various organs: A review

Research in creating 3D structures mirroring the extracellular matrix (ECM) with accurate environmental cues holds paramount significance in biological applications.Biomaterials that replicate ECM properties-mechanical, physicochemical, and biological-emerge as pivotal tools in mimicking ECM behavior.Incorporating synthetic and natural biomaterials is widely used to produce scaffolds suitable for the intended organs.Polycaprolactone (PCL), a synthetic biomaterial, boasts commendable mechanical properties, albeit with relatively modest biological attributes due to its hydrophobic nature.Chitosan (CTS) exhibits strong biological traits but lacks mechanical resilience for complex tissue regeneration.Notably, both PCL and CTS have demonstrated their application in tissue engineering for diverse types of tissues.Their combination across varying PCL:CTS ratios has increased the likelihood of fabricating scaffolds to address defects in sturdy and pliable tissues.This comprehensive analysis aspires to accentuate their distinct attributes within tissue engineering across different organs.The central focus resides in the role of PCL:CTS-based scaffolds, elucidating their contribution to the evolution of advanced functional 3D frameworks tailored for tissue engineering across diverse organs.Moreover, this discourse delves into the considerations pertinent to each organ.

New insights into muscularis macrophages in the gut: from their origin to therapeutic targeting

Muscularis macrophages, as the most abundant immune cells in the intestinal muscularis externa, exhibit tissue protective phenotype in the steady state. Owing to tremendous advances in technology, we now know the fact that muscularis macrophages are a heterogeneous population of cells which could be divided into different functional subsets depending on their anatomic niches. There is emerging evidence showing that these subsets, through molecular interactions with their neighbours, take part in a wide range of physiological and pathophysiological processes in the gut. In this review, we summarize recent progress (particularly over the past 4 years) on distribution, morphology, origin and functions of muscularis macrophages and, where possible, the characteristics of specific subsets in response to the microenvironment they occupy, with particular emphasis on their role in muscular inflammation. Furthermore, we also integrate their role in inflammation-related gastrointestinal disorders, such as post-operative ileus and diabetic gastroparesis, in order to propose future therapeutic strategies.

3D-Printed Antibacterial Scaffolds for the Regeneration of Alveolar Bone in Severe Periodontitis

Current clinical treatment of periodontitis alleviates periodontal symptoms and helps to keep the disease under control for extended periods. Despite this, a significant destruction of the tooth's underlying bone tissue often takes place progressively. Herein, we present a two-way therapeutic approach for local delivery of antibacterial agents and bone tissue regeneration, incorporating ~1% w/w tetracycline hydrochloride (TCH) into a 3D-printed scaffold composed of poly(ε-caprolactone) (PCL). Samples were assessed for their morphological, physicochemical, pharmacokinetic, and antibacterial properties. Furthermore, osteoprecursor cells (MC3T3-E1) were employed to evaluate the osteoinductive potential of the drug-loaded scaffolds. Cell proliferation, viability, and differentiation were determined on all cell-seeded scaffolds. At the end of the culture, PCL-TCH scaffolds promoted abundant collagen organic matrix, demonstrating augmented alkaline phosphatase (ALP) activity and areas of accumulated mineralised bone tissue, despite their belayed cell proliferation. Based on the observed effectiveness of the PCL-TCH scaffolds to inhibit Staphylococcus aureus, these constructs could serve as an alternative bioactive implant that supports bacterial inhibition and favours a 3D microenvironment for bone tissue regeneration in severe periodontitis.

Incorporation of Cell-Adhesive Proteins in 3D-Printed Lipoic Acid-Maleic Acid-Poly(Propylene Glycol)-Based Tough Gel Ink for Cell-Supportive Microenvironment

In extrusion-based 3D printing, the use of synthetic polymeric hydrogels can facilitate fabrication of cellularized and implanted scaffolds with sufficient mechanical properties to maintain the structural integrity and physical stress within the in vivo conditions. However, synthetic hydrogels face challenges due to their poor properties of cellular adhesion, bioactivity, and biofunctionality. New compositions of hydrogel inks have been designed to address this limitation. A viscous poly(maleate-propylene oxide)-lipoate-poly(ethylene oxide) (MPLE) hydrogel is recently developed that shows high-resolution printability, drug-controlled release, excellent mechanical properties with adhesiveness, and biocompatibility. In this study, the authors demonstrate that the incorporation of cell-adhesive proteins like gelatin and albumin within the MPLE gel allows printing of biologically functional 3D scaffolds with rapid cell spreading (within 7 days) and high cell proliferation (twofold increase) as compared with MPLE gel only. Addition of proteins (10% w/v) supports the formation of interconnected cell clusters (≈1.6-fold increase in cell areas after 7-day) and spreading of cells in the printed scaffolds without additional growth factors. In in vivo studies, the protein-loaded scaffolds showed excellent biocompatibility and increased angiogenesis without inflammatory response after 4-week implantation in mice, thus demonstrating the promise to contribute to the printable tough hydrogel inks for tissue engineering.

Control of maleic acid-propylene diepoxide hydrogel for 3D printing application for flexible tissue engineering scaffold with high resolution by end capping and graft polymerization

BACKGROUND

Control of 3D printing of highly tough hydrogel inks with adequate printability, scaffold fidelity and mechanical properties are highly desirable for biomedical and tissue engineering applications. However, developing a biocompatible tough ink with high-resolution printability, biodegradability, self-healing, adhesion, and integration with surrounding tissues is a big challenge in 3D printing. The aim of this study was to develop extrusion-based 3D printing of viscous hydrogel composing of maleic acid and propylene diepoxide by controlling continuous mechanisms of condensation and radical polymerization.

METHODS

The molecular weight of highly adhesive propagating poly(malate-co-propylene oxide) copolymer was controlled by capping its growing chain with mono-functional lipoic acid with different compositions during condensation reaction to form lipoic acid capped gel (LP-capped gel). Poly(ethylene oxide)-diacrylate, PEGDA, is graft-polymerized to the LP-capped backbone polymer (MPLE gel) by UV irradiation during 3D printing process to control the properties of gel printability, mechanical properties, and cell adhesiveness and post-printing fidelity of the printed scaffolds with high resolution and mechanical properties (MPLE scaffold). The scaffolds in complex geometries have been printed out in diverse forms with addition of model drugs with different molecular weights and chemical structures. Both the highly adhesive LP-capped gel and printing-controlled MPLE gel/scaffolds are diversely characterized and compared with for their applications to the extrusion-based printability, including biocompatibility, self-healing, drug releasing, adhesiveness, multi-layered high-resolution printing. Further in vitro/in vivo tests were done to observe cytotoxicity, immune response and tissue formation by using different cells in mice model.

RESULTS

LP-capped hydrogel from maleic acid and propylene diepoxide gel showed control of gel properties with lipoic acid with one function group of thiol during condensation reaction, and the ratio at 1:0.3 (w/v) between LP-capped gel and PEGDA was chosen for the optimal results during radical polymerization process for 3D printing at high resolution (90-140 μm in strut thickness) with various complex geometries (lattice, rhombus, and honeycomb). The hydrogel showed excellent properties of self-healing, mechanical strength, biocompatibility, etc. In addition, the long-term release profiles of bioactive molecules were well-controlled by incorporating drugs of high molecular bovine serum albumin (BSA, 21 days, 98.4 ± 0.69%), or small molecule ornidazole (ORN, 14 days, 97.1 ± 1.98%) into the MPLE gel scaffolds for the tests of potential therapeutic applications. More importantly, the MPLE gels represents excellent in vitro cyto-compatibility against osteoblast-like cells (MC3T3) with viability value at 96.43% ± 7.48% over 7 culturing days. For in-vivo studies, the flexible MPLE scaffolds showed significant improvement on angiogenesis with minor inflammatory response after 4-week implantation in mice.

CONCLUSION

The MPLE gel inks was well-controlled for the fabrication of flexible complex tissue engineering scaffold with high resolutions, shear-thinning, 3D printability and post-printing fidelity, by modulating the composition of the highly adhesive LP-capped gel and inert PEGDA as well as end capping of lipoic acid to the propagating poly(malate-co-propylene oxide) copolymer. The gel ink demonstrated its excellent printability, in vitro/in vivo biocompatibility and mechanical properties as well as sustained drug release from the gel.