Optimization of chondrocyte isolation and phenotype characterization for cartilage tissue engineering

Zwitterionic Poly-Carboxybetaine Polymers Restore Lubrication of Inflamed Articular Cartilage

Osteoarthritis is a degenerative joint disease that is associated with decreased synovial fluid viscosity and increased cartilage friction. Though viscosupplements are available for decades, their clinical efficacy is limited and there is ample need for more effective joint lubricants. This study first evaluates the tribological and biochemical properties of bovine articular cartilage explants after stimulation with the inflammatory cytokine interleukin-1β. This model is then used to investigate the tribological potential of carboxybetaine (CBAA)-based zwitterionic polymers of linear and bottlebrush architecture. Due to their affinity for cartilage tissue, these polymers form a highly hydrated surface layer that decreases friction under high load in the boundary lubrication regime. For linear pCBAA, these benefits are retained over several weeks and the relaxation time of cartilage explants under compression is furthermore decreased, thereby potentially boosting the weeping lubrication mechanism. Bottlebrush bb-pCBAA shows smaller benefits under boundary lubrication but is more viscous than linear pCBAA, therefore providing better lubrication under low load in the fluid-film regime and enabling a longer residence time to bind to the cartilage surface. Showing how CBAA-based polymers restore the lost lubrication mechanisms during inflammation can inspire the next steps toward more effective joint lubricants in the future.

Isolation of High-Quality Total RNA from Small Animal Articular Cartilage for Next-Generation Sequencing

Articular cartilage is characterized by a low density of chondrocytes surrounded by an abundant extracellular matrix (ECM) consisting of a dense mixture of collagens, proteoglycans, and glycosaminoglycans. Due to its low cellularity and high proteoglycan content, it is particularly challenging to extract high-quality total RNA suitable for sensitive high-throughput downstream applications such as RNA sequencing (RNA-Seq). Available protocols for high-quality RNA isolation from articular chondrocytes are inconsistent, resulting in suboptimal yield and compromised quality. This poses a significant difficulty in the application of RNA-Seq to study the cartilage transcriptome. Current protocols rely either on dissociation of cartilage ECM by collagenase digestion or pulverizing cartilage using various methods prior to RNA extraction. However, protocols for cartilage processing vary significantly depending on the species and source of cartilage within the body. Protocols for isolating RNA from human or large mammal (e.g., horse or cattle) cartilage samples are available, but this is not the case for chicken cartilage, despite the species being extensively used in cartilage research. Here, we present two improved RNA isolation protocols based on pulverization of fresh articular cartilage using a cryogenic mill or on enzymatic digestion using 1.2% (w/v) collagenase II. Our protocols optimize the collection and tissue processing steps to minimize RNA degradation and enhance RNA purity. Our results show that RNA purified from chicken articular cartilage using these methods has appropriate quality for RNA-Seq experiments. The procedure is applicable for RNA extraction from cartilage from other species such as dog, cat, sheep, and goat. The workflow for RNA-Seq analysis is also described here. © 2023 The Authors. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Extraction of total RNA from pulverized chicken articular cartilage Alternate Protocol: Extraction of total RNA from collagen-digested articular cartilage Support Protocol: Dissection of chicken articular cartilage from the knee joint Basic Protocol 2: RNA sequencing of total RNA from chicken articular cartilage.

Overexpression of transcription factor FoxA2 in the developing skeleton causes an enlargement of the cartilage hypertrophic zone, but it does not trigger ectopic differentiation in immature chondrocytes

We previously found that FoxA factors are necessary for chondrocyte differentiation. To investigate whether FoxA factors alone are sufficient to drive chondrocyte hypertrophy, we build a FoxA2 transgenic mouse in which FoxA2 cDNA is driven by a reiterated Tetracycline Response Element (TRE) and a minimal CMV promoter. This transgenic line was crossed with a col2CRE;Rosa26^rtTA/+ mouse line to generate col2CRE;Rosa26^rtTA/+;TgFoxA2^+/- mice for inducible expression of FoxA2 in cartilage using doxycycline treatment. Ectopic expression of FoxA2 in the developing skeleton reveals skeletal defects and shorter skeletal elements in E17.5 mice. The chondro-osseous border was frequently mis-shaped in mutant mice, with small islands of col.10+ hypertrophic cells extending in the metaphyseal bone. Even though overexpression of FoxA2 causes an accumulation of hypertrophic chondrocytes, it did not trigger ectopic hypertrophy in the immature chondrocytes. This suggests that FoxA2 may need transcriptional co-factors (such as Runx2), whose expression is restricted to the hypertrophic zone, and absent in the immature chondrocytes. To investigate a potential FoxA2/Runx2 interaction in immature chondrocytes versus hypertrophic cells, we separated these two subpopulations by FACS to obtain CD24⁺CD200⁺ hypertrophic chondrocytes and CD24⁺CD200^- immature chondrocytes and we ectopically expressed FoxA2 alone or in combination with Runx2 via lentiviral gene delivery. In CD24⁺CD200⁺ hypertrophic chondrocytes, FoxA2 enhanced the expression of chondrocyte hypertrophic markers collagen 10, MMP13, and alkaline phosphatase. In contrast, in the CD24⁺CD200^- immature chondrocytes, neither FoxA2 nor Runx2 overexpression could induce ectopic expression of hypertrophic markers MMP13, alkaline phosphatase, or PTH/PTHrP receptor. Overall these findings mirror our in vivo data, and suggest that induction of chondrocyte hypertrophy by FoxA2 may require other factors in addition to Runx2 (i.e., Hif2α, MEF2C, or perhaps unknown factors), whose expression/activity is rate-limiting in immature chondrocytes.

The Endplate Role in Degenerative Disc Disease Research: The Isolation of Human Chondrocytes from Vertebral Endplate—An Optimised Protocol

Background: Degenerative disc disease is a progressive and chronic disorder with many open questions regarding its pathomorphological mechanisms. In related studies, in vitro organ culture systems are becoming increasingly essential as a replacement option for laboratory animals. Live disc cells are highly appealing to study the possible mechanisms of intervertebral disc (IVD) degeneration. To study the degenerative processes of the endplate chondrocytes in vitro, we established a relatively quick and easy protocol for isolating human chondrocytes from the vertebral endplates. Methods: The fragments of human lumbar endplates following lumbar fusion were collected, cut, ground and partially digested with collagenase I in Advanced DMEM/F12 with 5% foetal bovine serum. The sediment was harvested, and cells were seeded in suspension, supplemented with special media containing high nutrient levels. Morphology was determined with phalloidin staining and the characterisation for collagen I, collagen II and aggrecan with immunostaining. Results: The isolated cells retained viability in appropriate laboratory conditions and proliferated quickly. The confluent culture was obtained after 14 days. Six to 8 h after seeding, attachments were observed, and proliferation of the isolated cells followed after 12 h. The cartilaginous endplate chondrocytes were stable with a viability of up to 95%. Pheno- and geno-typic analysis showed chondrocyte-specific expression, which decreased with passages. Conclusions: The reported cell isolation process is simple, economical and quick, allowing establishment of a viable long-term cell culture. The availability of a vertebral endplate cell model will permit the study of cell properties, biochemical aspects, the potential of therapeutic candidates for the treatment of disc degeneration, and toxicology studies in a well-controlled environment.

Scaffold-free approaches for the fabrication of engineered articular cartilage tissue

Tissue engineered cartilaginous constructs have meet great advances in the past decades as a treatment for osteoarthritis, a degenerative disease affecting people all over the world as the population ages. Scaffold-free tissue engineered constructs are designed and developed in recent years with only cells and cell-derived matrix involved. Scaffold-free tissue constructs do not require cell adherence on exogenous materials and are superior to scaffold-based constructs in (1) relying on only cells to produce matrix, (2) not interfering cell-cell signaling, cell migration or small molecules diffusion after implantation and (3) introducing no exogenous impurities. In this review, three main scaffold-free methodologies for cartilage tissue engineering, the cell sheet technology, the phase transfer cell culture-living hyaline cartilage graft (PTCC-LhCG) system and the cell aggregate-based (bottom-up) methods, were reviewed, covering mold fabrication, decellularization and 3D bioprinting. The recent advances, medical applications, superiority and drawbacks were elaborated in detail.

Sequential Enzymatic Digestion of Different Cartilage Tissues: A Rapid and High-Efficiency Protocol for Chondrocyte Isolation, and Its Application in Cartilage Tissue Engineering

OBJECTIVE

The classic chondrocyte isolation protocol is a 1-step enzymatic digestion protocol in which cartilage samples are digested in collagenase solution for a single, long period. However, this method usually results in incomplete cartilage dissociation and low chondrocyte quality. In this study, we aimed to develop a rapid, high-efficiency, and flexible chondrocyte isolation protocol for cartilage tissue engineering.

DESIGN

Cartilage tissues harvested from rabbit ear, rib, septum, and articulation were minced and subjected to enzymatic digestion using the classic protocol or the newly developed sequential protocol. In the classic protocol, cartilage fragments were subjected to one 12-hour digestion. In the sequential protocol, cartilage fragments were sequentially subjected to 2-hour first digestion, followed by two 3-hour digestions. The collected cells were then subjected to analyses of cell-yield efficiency, viability, proliferation, phenotype, and cartilage matrix synthesis capacity.

RESULTS

Overall, the sequential protocol exhibited higher cell-yield efficiency than the classic protocol for the 4 cartilage types. The cells harvested from the second and third digestions demonstrated higher cell viability, more proliferative activity, a better chondrocyte phenotype, and a higher cartilage-specific matrix synthesis ability than those harvested from the first digestion and after the classic 1-step protocol.

CONCLUSIONS

The sequential protocol is a rapid, flexible, high-efficiency chondrocyte isolation protocol for different cartilage tissues. We recommend using this protocol for chondrocyte isolation, and in particular, the cells obtained after the subsequent 3-hour sequential digestions should be used for chondrocyte-based therapy.

Understanding factors affecting human chondrocyte culturing: an experimental study

Over the years, surgical strategies have been developed in hope of full regeneration of the injured cartilage. In our study, we aimed to develop an optimized chondrocyte culture isolation technique as an active ingredient of a standardized autologous chondrocte implantation product, which is able to maintain the phenotype along with the molecular features of the cartilage. We compared different enzymes, which suggested optimal performance with collagenase type II at 5 mg/ml concentration. Thereafter, we observed that COL2 and GAG expression is substantially reduced with passaging. There was a need to omit passaging to reach the optimal isolation method. We then tested various growth factors and media in order to maintain the natural character of chondrocytes. Our study also suggested the highest COL2 and GAG expressions with the highest recovery in the presence of Advanced DMEM. Autologous chondrocyte implantation manufacturing approval was recently received from the national competent authority, making it possible to utilize the process engineering protocol developed with this study at our Tissue and Cell Manufacturing Center as a part of the autologous chondrocyte implantation manufacturing standard operation procedure (SOP).

Isolation, culturing and gene expression profiling of inner mass cells from stable and vulnerable carotid atherosclerotic plaques

The connective tissue components that form the atherosclerotic plaque body are produced by the plaque inner mass cells (PIMC), located inside the plaque. We report an approach to isolate and culture cells from the connective tissue of stable and vulnerable human atherosclerotic plaques based on elimination of non-connective tissue cells such as blood and non-plaque intima cells with a lysis buffer. The resulting plaque cells were characterized by growth capacity, morphology, transcriptome profiling and specific protein expression. Plaque cells slowly proliferated for up to three passages unaffected by the use of proliferation stimulants or changes of culture media composition. Stable plaques yielded more cells than vulnerable ones. Plaque cell cultures also contained several morphological cellular types. RNA-seq profiles of plaque cells were different from any of the cell types known to be involved in atherogenesis. The expression of the following proteins was observed in cultured plaque cells: smooth muscle cells marker α-SMA, macrophage marker CD14, extracellular matrix proteins aggrecan, fibronectin, neovascularisation markers VEGF-A, CD105, cellular adhesion receptor CD31 and progenitor/dedifferentiation receptor CD34. Differential expression of several notable transcripts in cells from stable and vulnerable plaques suggests the value of plaque cell culture studies for the search of plaque vulnerability markers.

Utility of a rotation/revolution-type agitator for chondrocyte isolation during preparation of engineered cartilage

During the manufacture of cell- and tissue-based products, such as engineered cartilage for autologous chondrocyte implantation, maximizing the number of cells isolated from donor tissue substantially improves the productivity of these products. The method used for agitating tissues with digestive fluid and enzymes can considerably affect both the quality and quantity of isolated cells. This study aimed to investigate the effectiveness of a rotation/revolution-type agitator for chondrocyte isolation following the enzymatic digestion of rat costal cartilage. Cartilage tissue cut into 1 mm³-thick sections was equally divided between two groups and placed in 50-mL conical tubes; sections in both groups were digested using 0.1 mg/mL liberase TH (collagenase/thermolysin) at 37 °C for 4 h with either rotation/revolution or conventional orbital agitation method. Compared with using conventional orbital agitator, using the rotation/revolution-type agitator resulted in a significant (>two-fold) increase in the number of isolated cells. In subsequent primary cultures, chondrocytes obtained by rotation/revolution agitation showed superior initial attachment to tissue culture dish on day 1 and 2 compared with those obtained by conventional agitation; however, no differences in cell proliferation or cartilage-related molecule expression patterns were observed between cells derived from either method after 3 days of subculture. These findings suggested that there are no disadvantages to the proposed rotation/revolution agitation method. Rotation/revolution-type agitators are a promising apparatus for preparing chondrocytes for primary cultures and cartilage tissue engineering.

Progenitor cells from different zones of human cartilage and their correlation with histopathological osteoarthritis progression

Cell-based therapies development for the treatment of osteoarthritis (OA) requires an understanding of the disease progression and attributes of the cells resident in cartilage. This study focused on quantitative assessment of the concentration and biological potential of stem and progenitor cells resident in different zones of cartilage displaying macroscopic Outerbridge grade 1-2 OA, and their correlation with OA progression based on established histologic scoring system. Lateral femoral condyles were collected from 15 patients with idiopathic OA and varus knees undergoing total knee arthroplasty. Superficial(C_sp , top ∼ 500 µm) and deep cartilage(C_dp ) was separated. Chondrogenic Connective Tissue Progenitors (CTP-C) were assayed by standardized Colony-Forming-Unit assay using automated image analysis (Colonyze^TM ) based on ASTM standard F-2944-12. Cell concentration (cells/mg) was significantly greater in C_sp (median: 7,000; range: 3,440-17,600) than C_dp (median: 5,340; range: 3,393-9,660), p = 0.039. Prevalence (CTPs/million cells) was not different between C_sp (median: 1,274; range: 0-3,898) and C_dp (median:1,365; range:0-6,330), p = 0.42. In vitro performance of CTP-C progeny varied widely within and between patients, manifest by variation in colony size and morphology. Mean histopathological Mankin score was 4.7 (SD = 1.2), representing mild to moderate OA. Tidemark breach by blood vessels was associated with lower C_sp cell concentration (p = 0.02). Matrix degradation was associated with lower C_dp cell and CTP-C concentration (p = 0.015 and p = 0.095, respectively), independent of articular surface changes. These findings suggest that the initiation of OA may occur in either superficial or deep zones. The pathological changes affect CTP-Cs in C_sp and C_dp cartilage zones differently. The heterogeneity among the available CTP-Cs in C_sp and C_dp suggests performance-based selection to optimize cell-sourcing strategies for therapy. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1728-1738, 2018.

Mimetic Hierarchical Approaches for Osteochondral Tissue Engineering

In order to engineer biomimetic osteochondral (OC) construct, it is necessary to address both the cartilage and bone phase of the construct, as well as the interface between them, in effect mimicking the developmental processes when generating hierarchical scaffolds that show gradual changes of physical and mechanical properties, ideally complemented with the biochemical gradients. There are several components whose characteristics need to be taken into account in such biomimetic approach, including cells, scaffolds, bioreactors as well as various developmental processes such as mesenchymal condensation and vascularization, that need to be stimulated through the use of growth factors, mechanical stimulation, purinergic signaling, low oxygen conditioning, and immunomodulation. This chapter gives overview of these biomimetic OC system components, including the OC interface, as well as various methods of fabrication utilized in OC biomimetic tissue engineering (TE) of gradient scaffolds. Special attention is given to addressing the issue of achieving clinical size, anatomically shaped constructs. Besides such neotissue engineering for potential clinical use, other applications of biomimetic OC TE including formation of the OC tissues to be used as high-fidelity disease/healing models and as in vitro models for drug toxicity/efficacy evaluation are covered.

HIGHLIGHTS

Biomimetic OC TE uses "smart" scaffolds able to locally regulate cell phenotypes and dual-flow bioreactors for two sets of conditions for cartilage/bone Protocols for hierarchical OC grafts engineering should entail mesenchymal condensation for cartilage and vascular component for bone Immunomodulation, low oxygen tension, purinergic signaling, time dependence of stimuli application are important aspects to consider in biomimetic OC TE.

Gender-specific differential expression of exosomal miRNA in synovial fluid of patients with osteoarthritis

The pathogenesis of osteoarthritis (OA) is poorly understood, and therapeutic approaches are limited to preventing progression of the disease. Recent studies have shown that exosomes play a vital role in cell-to-cell communication, and pathogenesis of many age-related diseases. Molecular profiling of synovial fluid derived exosomal miRNAs may increase our understanding of OA progression and may lead to the discovery of novel biomarkers and therapeutic targets. In this article we report the first characterization of exosomes miRNAs from human synovial fluid. The synovial fluid exosomes share similar characteristics (size, surface marker, miRNA content) with previously described exosomes in other body fluids. MiRNA microarray analysis showed OA specific exosomal miRNA of male and female OA. Gene Ontology (GO) analysis and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis identified gender-specific target genes/signaling pathways. These pathway analyses showed that female OA specific miRNAs are estrogen responsive and target TLR (toll-like receptor) signaling pathways. Furthermore, articular chondrocytes treated with OA derived extracellular vesicles had decreased expression of anabolic genes and elevated expression of catabolic and inflammatory genes. In conclusion, synovial fluid exosomal miRNA content is altered in patients with OA and these changes are gender specific.

Use of Interim Scaffolding and Neotissue Development to Produce a Scaffold-Free Living Hyaline Cartilage Graft

The fabrication of three-dimensional (3D) constructs relies heavily on the use of biomaterial-based scaffolds. These are required as mechanical supports as well as to translate two-dimensional cultures to 3D cultures for clinical applications. Regardless of the choice of scaffold, timely degradation of scaffolds is difficult to achieve and undegraded scaffold material can lead to interference in further tissue development or morphogenesis. In cartilage tissue engineering, hydrogel is the highly preferred scaffold material as it shares many similar characteristics with native cartilaginous matrix. Hence, we employed gelatin microspheres as porogens to create a microcavitary alginate hydrogel as an interim scaffold to facilitate initial chondrocyte 3D culture and to establish a final scaffold-free living hyaline cartilaginous graft (LhCG) for cartilage tissue engineering.

Bioreactor-Based Online Recovery of Human Progenitor Cells with Uncompromised Regenerative Potential: A Bone Tissue Engineering Perspective

The use of a 3D perfusion culture environment for stem cell expansion has been shown to be beneficial for maintenance of the original cell functionality but due to several system inherent characteristics such as the presence of extracellular matrix, the continued development and implementation of 3D perfusion bioreactor technologies is hampered. Therefore, this study developed a methodology for harvesting a progenitor cell population from a 3D open porous culture surface after expansion in a perfusion bioreactor and performed a functional characterization of the expanded cells. An initial screening showed collagenase to be the most interesting reagent to release the cells from the 3D culture surface as it resulted in high yields without compromising cell viability. Subsequently a Design of Experiment approach was used to obtain optimized 3D harvest conditions by assessing the interplay of flow rate, collagenase concentration and incubation time on the harvest efficiency, viability and single cell fraction. Cells that were recovered with the optimized harvest protocol, by perfusing a 880 U/ml collagenase solution for 7 hours at a flow rate of 4 ml/min, were thereafter functionally analyzed for their characteristics as expanded progenitor cell population. As both the in vitro tri-lineage differentiation capacity and the in vivo bone forming potential were maintained after 3D perfusion bioreactor expansion we concluded that the developed seeding, culture and harvest processes did not significantly compromise the viability and potency of the cells and can contribute to the future development of integrated bioprocesses for stem cell expansion.