Schwann Cells Migration on Patterned Polydimethylsiloxane Microgrooved Surface

Submicron-Grooved Films Modulate the Directional Alignment and Biological Function of Schwann Cells

Topographical cues on material surfaces are crucial for guiding the behavior of nerve cells and facilitating the repair of peripheral nerve defects. Previously, micron-grooved surfaces have shown great potential in controlling nerve cell alignment for studying the behavior and functions of those cells and peripheral nerve regeneration. However, the effects of smaller-sized topographical cues, such as those in the submicron- and nano-scales, on Schwann cell behavior remain poorly understood. In this study, four different submicron-grooved polystyrene films (800/400, 800/100, 400/400, and 400/100) were fabricated to study the behavior, gene expression, and membrane potential of Schwann cells. The results showed that all submicron-grooved films could guide the cell alignment and cytoskeleton in a groove depth-dependent manner. Cell proliferation and cell cycle assays revealed that there was no significant difference between the submicron groove samples and the flat control. However, the submicron grooves can direct the migration of cells and upregulate the expression of critical genes in axon regeneration and myelination (e.g., MBP and Smad6). Finally, the membrane potential of the Schwann cells was significantly altered on the grooved sample. In conclusion, this study sheds light on the role of submicron-grooved patterns in regulating the behavior and function of Schwann cells, which provides unique insights for the development of implants for peripheral nerve regeneration.

The impact of physical, biochemical, and electrical signaling on Schwann cell plasticity

Peripheral nervous system (PNS) injuries are an ongoing health care concern. While autografts and allografts are regarded as the current clinical standard for traumatic injury, there are inherent limitations that suggest alternative remedies should be considered for therapeutic purposes. In recent years, nerve guidance conduits (NGCs) have become increasingly popular as surgical repair devices, with a multitude of various natural and synthetic biomaterials offering potential to enhance the design of conduits or supplant existing technologies entirely. From a cellular perspective, it has become increasingly evident that Schwann cells (SCs), the primary glia of the PNS, are a predominant factor mediating nerve regeneration. Thus, the development of severe nerve trauma therapies requires a deep understanding of how SCs interact with their environment, and how SC microenvironmental cues may be engineered to enhance regeneration. Here we review the most recent advancements in biomaterials development and cell stimulation strategies, with a specific focus on how the microenvironment influences the behavior of SCs and can potentially lead to functional repair. We focus on microenvironmental cues that modulate SC morphology, proliferation, migration, and differentiation to alternative phenotypes. Promotion of regenerative phenotypic responses in SCs and other non-neuronal cells that can augment the regenerative capacity of multiple biomaterials is considered along with innovations and technologies for traumatic injury.

Three-Dimensional Microfilament Printing of a Decellularized Extracellular Matrix (dECM) Bioink Using a Microgel Printing Bath for Nerve Graft Fabrication and the Effectiveness of dECM Graft Combined with a Polycaprolactone Conduit

Various synthetic and decellularized materials are being used to reconstruct peripheral nerve defects and replace autologous nerve grafts. In this study, we developed a microgel printing bath to three-dimensionally (3D) print a peripheral nervous system decellularized extracellular matrix nerve graft reinforced by a polycaprolactone (PCL) conduit. The straightforward fabrication method of an alginate microgel-supplemented printing bath allows a 30 μm filament resolution of a low viscous decellularized extracellular matrix hydrogel with neutral pH. When applied to a sciatic nerve defect model of rats, the total number of regenerated axons and relative gastrocnemius muscle weight ratio were comparable to those of the autologous nerve graft group. Meanwhile, the results were superior to those of the porcine decellularized nerve graft group or the 3D printed decellularized extracellular matrix graft group. This study will be the first step demonstrating that the 3D printed decellularized extracellular matrix (dECM) graft with a PCL conduit is an effective and reliable choice to replace an autologous nerve graft in the near future.

Graphene oxide-composited chitosan scaffold contributes to functional recovery of injured spinal cord in rats

The study illustrates that graphene oxide nanosheets can endow materials with continuous electrical conductivity for up to 4 weeks. Conductive nerve scaffolds can bridge a sciatic nerve injury and guide the growth of neurons; however, whether the scaffolds can be used for the repair of spinal cord nerve injuries remains to be explored. In this study, a conductive graphene oxide composited chitosan scaffold was fabricated by genipin crosslinking and lyophilization. The prepared chitosan-graphene oxide scaffold presented a porous structure with an inner diameter of 18–87 μm, and a conductivity that reached 2.83 mS/cm because of good distribution of the graphene oxide nanosheets, which could be degraded by peroxidase. The chitosan-graphene oxide scaffold was transplanted into a T9 total resected rat spinal cord. The results show that the chitosan-graphene oxide scaffold induces nerve cells to grow into the pores between chitosan molecular chains, inducing angiogenesis in regenerated tissue, and promote neuron migration and neural tissue regeneration in the pores of the scaffold, thereby promoting the repair of damaged nerve tissue. The behavioral and electrophysiological results suggest that the chitosan-graphene oxide scaffold could significantly restore the neurological function of rats. Moreover, the functional recovery of rats treated with chitosan-graphene oxide scaffold was better than that treated with chitosan scaffold. The results show that graphene oxide could have a positive role in the recovery of neurological function after spinal cord injury by promoting the degradation of the scaffold, adhesion, and migration of nerve cells to the scaffold. This study was approved by the Ethics Committee of Animal Research at the First Affiliated Hospital of Third Military Medical University (Army Medical University) (approval No. AMUWEC20191327) on August 30, 2019.

Methylcobalamin-Loaded PLCL Conduits Facilitate the Peripheral Nerve Regeneration

The feasible fabrication of nerve guidance conduits (NGCs) with good biological performance is important for translation in clinics. In this study, poly(d,l-lactide-co-caprolactone) (PLCL) films loaded with various amounts (wt; 5%, 15%, 25%) of methylcobalamin (MeCbl) are prepared, and are further rolled and sutured to obtain MeCbl-loaded NGCs. The MeCbl can be released in a sustainable manner up to 21 days. The proliferation and elongation of Schwann cells, and the proliferation of Neuro2a cells are enhanced on these MeCbl-loaded films. The MeCbl-loaded NGCs are implanted into rats to induce the regeneration of 10 mm amputated sciatic nerve defects, showing the ability to facilitate the recovery of motor and sensory function, and to promote myelination in peripheral nerve regeneration. In particular, the 15% MeCbl-loaded PLCL conduit exhibits the most satisfactory recovery of sciatic nerves in rats with the largest diameter and thickest myelinated fibers.

Engineering a platform for nerve regeneration with direct application to nerve repair technology

The development of effective treatment options for repair of peripheral nerves is complicated by lack of knowledge concerning the interactions between cells and implants. A promising device, the multichannel scaffold, incorporates microporous channels, aligning glia and directing axonal growth across a nerve gap. To enhance clinical outcomes of nerve repair, a platform, representative of current implant technology, was engineered which 1) recapitulated key device features (porosity and linearity) and 2) demonstrated remyelination of adult neurons. The in vitro platform began with the study of Schwann cells on porous polycaprolactone (PCL) and poly(lactide co-glycolide) (PLGA) substrates. Surface roughness determined glial cell attachment, and an additional layer of topography, 40 μm linear features, aligned Schwann cells and axons. In addition, direct co-culture of sensory neurons with Schwann cells significantly increased neurite outgrowth, compared to neurons cultured alone (naive or pre-conditioned). In contrast to the control substrate (glass), on porous PCL substrates, Schwann cells differentiated into a mature myelinating phenotype, expressing Oct-6, MPZ and MBP. The direct applicability of this platform to nerve implants, including its response to physiological cues, allows for optimization of cell-material interactions, close observation of the regeneration process, and the study of therapeutics, necessary to advance peripheral nerve repair technology.

Hierarchically aligned gradient collagen micropatterns for rapidly screening Schwann cells behavior

To penetrate the effect of protein gradient micropattern on peripheral nerve regeneration, the hierarchically aligned gradient collagen micropattern was prepared by micromoulding method and the influence on Schwann cells growth behavior was studied. The morphology, wettability, stability and component variation of the micropatterns were firstly characterized. Then, Schwann cells were cultured and the related mechanism was penetrated. The results showed that the gradient collagen micropattern could be well fabricated. The surface wettability varied with the change of collagen concentration, and the prepared gradient micropattern showed a good stability after PBS immersion for 15 days. The results of Schwann cells culture and morphological index analysis displayed that the prepared gradient collagen micropatten could well regulate the orientation growth of Schwann cells, while a much better cell alignment growth was obtained on the gradient micropattern with higher collagen concentration and wider pattern size. PCR and WB showed that the micropattern structure could effectively up-regulate the key specific genes for axon regeneration and myelination process. Overall, the study provides a systematic and facile method for understanding the effect of various sized micropatterns on cell behavior, which may have a great significance for the development of artificial implants for tissue engineering and regenerative medicine.

Mitochondrial Damage-Associated Molecular Patterns of Injured Axons Induce Outgrowth of Schwann Cell Processes

Activated Schwann cells put out cytoplasmic processes that play a significant role in cell migration and axon regeneration. Following nerve injury, axonal mitochondria release mitochondrial damage-associated molecular patterns (mtDAMPs), including formylated peptides and mitochondrial DNA (mtDNA). We hypothesize that mtDAMPs released from disintegrated axonal mitochondria may stimulate Schwann cells to put out cytoplasmic processes. We investigated RT4-D6P2T schwannoma cells (RT4) in vitro treated with N-formyl-L-methionyl-L-leucyl-phenylalanine (fMLP) or cytosine-phospho-guanine oligodeoxynucleotide (CpG ODN) for 1, 6 and 24 h. We also used immunohistochemical detection to monitor the expression of formylpeptide receptor 2 (FPR2) and toll-like receptor 9 (TLR9), the canonical receptors for formylated peptides and mtDNA, in RT4 cells and Schwann cells distal to nerve injury. RT4 cells treated with fMLP put out a significantly higher number of cytoplasmic processes compared to control cells. Preincubation with PBP10, a selective inhibitor of FPR2 resulted in a significant reduction of cytoplasmic process outgrowth. A significantly higher number of cytoplasmic processes was also found after treatment with CpG ODN compared to control cells. Pretreatment with inhibitory ODN (INH ODN) resulted in a reduced number of cytoplasmic processes after subsequent treatment with CpG ODN only at 6 h, but 1 and 24 h treatment with CpG ODN demonstrated an additive effect of INH ODN on the development of cytoplasmic processes. Immunohistochemistry and western blot detected increased levels of tyrosine-phosphorylated paxillin in RT4 cells associated with cytoplasmic process outgrowth after fMLP or CpG ODN treatment. We found increased immunofluorescence of FPR2 and TLR9 in RT4 cells treated with fMLP or CpG ODN as well as in activated Schwann cells distal to the nerve injury. In addition, activated Schwann cells displayed FPR2 and TLR9 immunostaining close to GAP43-immunopositive regenerated axons and their growth cones after nerve crush. Increased FPR2 and TLR9 immunoreaction was associated with activation of p38 and NFkB, respectively. Surprisingly, the growth cones displayed also FPR2 and TLR9 immunostaining. These results present the first evidence that potential mtDAMPs may play a key role in the induction of Schwann cell processes. This reaction of Schwann cells can be mediated via FPR2 and TLR9 that are canonical receptors for formylated peptides and mtDNA. The possible role for FPR2 and TLR9 in growth cones is also discussed.

Schwann Cells Enhance Penetration of Regenerated Axons into Three-Dimensional Microchannels

Nerve regeneration after injury requires proper axon alignment to bridge the lesion site and myelination to achieve functional recovery. Transplanted scaffolds with aligned channels, have been shown to induce axon growth to some extent. However, the penetration of axons into the microchannels remain a challenge, influencing the functional recovery of regenerated nerves. We previously demonstrated that the size of microchannels exerts significant impact on Schwann cells (SCs) migration. Here we demonstrate that migration of SCs promotes, significantly, the dorsal root ganglion (DRG) neurons to extend axons into three-dimensional channels and form aligned fascicular-like axon tracts. Moreover, the migrating SCs attach and wrap around the aligned axons of DRG neurons in the microchannels and initiate myelination. The SCs release growth factors that provide chemotactic signals to the regenerating axons, similar to the response achieved with nerve growth factor (NGF), but with the additional capability of promoting myelination, thereby demonstrating the beneficial effects of including SCs over NGF alone in enhancing axon penetration and myelination in three-dimensional microchannels.

Optimization of micropatterned poly(lactic-co-glycolic acid) films for enhancing dorsal root ganglion cell orientation and extension

Nerve conduits have been a viable alternative to the 'gold standard' autograft for treating small peripheral nerve gap injuries. However, they often produce inadequate functional recovery outcomes and are ineffective in large gap injuries. Ridge/groove surface micropatterning has been shown to promote neural cell orientation and guide growth. However, optimization of the ratio of ridge/groove parameters to promote orientation and extension for dorsal root ganglion (DRG) cells on poly(lactic-co-glycolic acid) (PLGA) films has not been previously conducted. Photolithography and micro-molding were used to define various combinations of ridge/groove dimensions on PLGA films. The DRG cells obtained from chicken embryos were cultured on micropatterned PLGA films for cell orientation and migration evaluation. Biodegradation of the films occurred during the test period, however, this did not cause deformation or distortion of the micropatterns. Results from the DRG cell orientation test suggest that when the ridge/groove ratio equals 1 (ridge/groove width parameters are equal, i.e., 10 μm/10 μm (even)), the degree of alignment depends on the size of the ridges and grooves, when the ratio is smaller than 1 (groove controlled) the alignment increases as the ridge size decreases, and when the ratio is larger than 1 (ridge controlled), the alignment is reduced as the width of the grooves decreases. The migration rate and neurite extension of DRG neurons were greatest on 10 μm/10 μm and 30 μm/30 μm micropatterned PLGA films. Based on the data, the 10 μm/10 μm and 30 μm/30 μm micropatterned PLGA films are the optimized ridge/groove surface patterns for the construction of nerve repair devices.