Noninvasive Real-Time Assessment of Cell Viability in a Three-Dimensional Tissue

Three-dimensional, label-free cell viability measurements in tissue engineering scaffolds using optical coherence tomography

In the field of tissue engineering, 3D scaffolds and cells are often combined to yield constructs that are used as therapeutics to repair or restore tissue function in patients. Viable cells are often required to achieve the intended mechanism of action for the therapy, where the live cells may build new tissue or may release factors that induce tissue regeneration. Thus, there is a need to reliably measure cell viability in 3D scaffolds as a quality attribute of a tissue-engineered medical product. Here, we developed a noninvasive, label-free, 3D optical coherence tomography (OCT) method to rapidly (2.5 min) image large sample volumes (1 mm3 ) to assess cell viability and distribution within scaffolds. OCT imaging was assessed using a model scaffold-cell system consisting of a polysaccharide-based hydrogel seeded with human Jurkat cells. Four test systems were used: hydrogel seeded with live cells, hydrogel seeded with heat-shocked or fixed dead cells and hydrogel without any cells. Time series OCT images demonstrated changes in the time-dependent speckle patterns due to refractive index (RI) variations within live cells that were not observed for pure hydrogel samples or hydrogels with dead cells. The changes in speckle patterns were used to generate live-cell contrast by image subtraction. In this way, objects with large changes in RI were binned as live cells. Using this approach, on average, OCT imaging measurements counted 326 ± 52 live cells per 0.288 mm3 for hydrogels that were seeded with 288 live cells (as determined by the acridine orange-propidium iodide cell counting method prior to seeding cells in gels). Considering the substantial uncertainties in fabricating the scaffold-cell constructs, such as the error from pipetting and counting cells, a 13% difference in the live-cell count is reasonable. Additionally, the 3D distribution of live cells was mapped within a hydrogel scaffold to assess the uniformity of their distribution across the volume. Our results demonstrate a real-time, noninvasive method to rapidly assess the spatial distribution of live cells within a 3D scaffold that could be useful for assessing tissue-engineered medical products.

Biomimetic In Vitro Lung Models: Current Challenges and Future Perspective

As post-COVID complications, chronic respiratory diseases are one of the foremost causes of mortality. The quest for a cure for this recent global challenge underlines that the lack of predictive in vitro lung models is one of the main bottlenecks in pulmonary preclinical drug development. Despite rigorous efforts to develop biomimetic in vitro lung models, the current cutting-edge models represent a compromise in numerous technological and biological aspects. Most advanced in vitro models are still in the "proof-of-concept" phase with a low clinical translation of the findings. On the other hand, advances in cellular and molecular studies are mainly based on relatively simple and unrealistic in vitro models. Herein, the current challenges and potential strategies toward not only bioinspired but truly biomimetic lung models are discussed.

Design considerations of benchtop fluid flow bioreactors for bio-engineered tissue equivalents in vitro

One of the major aims of bio-engineering tissue equivalents in vitro is to create physiologically relevant culture conditions to accurately recreate the cellular microenvironment. This often includes incorporation of factors such as the extracellular matrix, co-culture of multiple cell types and three-dimensional culture techniques. These advanced techniques can recapitulate some of the properties of tissue in vivo, however fluid flow is a key aspect that is often absent. Fluid flow can be introduced into cell and tissue culture using bioreactors, which are becoming increasingly common as we seek to produce increasingly accurate tissue models. Bespoke technology is continuously being developed to tailor systems for specific applications and to allow compatibility with a range of culture techniques. For effective perfusion of a tissue culture many parameters can be controlled, ranging from impacts of the fluid flow such as increased shear stress and mass transport, to potentially unwanted side effects such as temperature fluctuations. A thorough understanding of these properties and their implications on the culture model can aid with a more accurate interpretation of results. Improved and more complete characterisation of bioreactor properties will also lead to greater accuracy when reporting culture conditions in protocols, aiding experimental reproducibility, and allowing more precise comparison of results between different systems. In this review we provide an analysis of the different factors involved in the development of benchtop flow bioreactors and their potential biological impacts across a range of applications.

Living Sample Viability Measurement Methods from Traditional Assays to Nanomotion

Living sample viability measurement is an extremely common process in medical, pharmaceutical, and biological fields, especially drug pharmacology and toxicology detection. Nowadays, there are a number of chemical, optical, and mechanical methods that have been developed in response to the growing demand for simple, rapid, accurate, and reliable real-time living sample viability assessment. In parallel, the development trend of viability measurement methods (VMMs) has increasingly shifted from traditional assays towards the innovative atomic force microscope (AFM) oscillating sensor method (referred to as nanomotion), which takes advantage of the adhesion of living samples to an oscillating surface. Herein, we provide a comprehensive review of the common VMMs, laying emphasis on their benefits and drawbacks, as well as evaluating the potential utility of VMMs. In addition, we discuss the nanomotion technique, focusing on its applications, sample attachment protocols, and result display methods. Furthermore, the challenges and future perspectives on nanomotion are commented on, mainly emphasizing scientific restrictions and development orientations.

Decellularized human-sized pulmonary scaffolds for lung tissue engineering: a comprehensive review

The ultimate goal of lung bioengineering is to produce transplantable lungs for human beings. Therefore, large-scale studies are of high importance. In this paper, we review the investigations on decellularization and recellularization of human-sized lung scaffolds. First, studies that introduce new ways to enhance the decellularization of large-scale lungs are reviewed, followed by the investigations on the xenogeneic sources of lung scaffolds. Then, decellularization and recellularization of diseased lung scaffolds are discussed to assess their usefulness for tissue engineering applications. Next, the use of stem cells in recellularizing acellular lung scaffolds is reviewed, followed by the case studies on the transplantation of bioengineered lungs. Finally, the remaining challenges are discussed, and future directions are highlighted.

Enhanced articular cartilage decellularization using a novel perfusion-based bioreactor method

Current decellularization methods for articular cartilages require many steps, various and high amounts of detergents, and a relatively long time to produce decellularized scaffolds. In addition, such methods often damage the essential components and the structure of the tissue. This study aims to introduce a novel perfusion-based bioreactor (PBB) method to decellularize bovine articular cartilages efficiently while reducing the harmful physical and chemical steps as well as the duration of the process. This leads to better preservation of the structure and the essential components of the native tissue. Firstly, a certain number of channels (Ø 180 μm) were introduced into both sides of cylindrical articular bovine cartilage disks (5 mm in diameter and 1 mm in thickness). Next, the disks were decellularized in the PBB and a shaker as the control. Using the PBB method resulted in ∼90% reduction of DNA content in the specimens, which was significantly higher than those of the shaker results with ∼60%. Also, ∼50% sulfated glycosaminoglycan (sGAG) content and ∼92% of the compression properties were maintained implying the efficient preservation of the structure and components of the scaffolds. Moreover, the current study indicated that the PBB specimens supported the adherence and proliferation of the new cells effectively. In conclusion, the results show that the use of PBB method increases the efficiency of producing decellularized cartilage scaffolds with a better maintenance of essential components and structure, while reducing the chemicals and steps required for the process. This will pave the way for producing close-to-natural scaffolds for cartilage tissue engineering.

Advances in bioreactors for lung bioengineering: From scalable cell culture to tissue growth monitoring

Lung bioengineering has emerged to resolve the current lung transplantation limitations and risks, including the shortage of donor organs and the high rejection rate of transplanted lungs. One of the most critical elements of lung bioengineering is bioreactors. Bioreactors with different applications have been developed in the last decade for lung bioengineering approaches, aiming to produce functional reproducible tissue constructs. Here, the current status and advances made in the development and application of bioreactors for bioengineering lungs are comprehensively reviewed. First, bioreactor design criteria are explained, followed by a discussion on using bioreactors as a culture system for scalable expansion and proliferation of lung cells, such as producing epithelial cells from induced pluripotent stem cells (iPSCs). Next, bioreactor systems facilitating and improving decellularization and recellularization of lung tissues are discussed, highlighting the studies that developed bioreactors for producing engineered human-sized lungs. Then, monitoring bioreactors are reviewed, showing their ability to evaluate and optimize the culture conditions for maturing engineered lung tissues, followed by an explanation on the ability of ex vivo lung perfusion systems for reconditioning the lungs before transplantation. After that, lung cancer studies simplified by bioreactors are discussed, showing the potentials of bioreactors in lung disease modeling. Finally, other platforms with the potential of facilitating lung bioengineering are described, including the in vivo bioreactors and lung-on-a-chip models. In the end, concluding remarks and future directions are put forward to accelerate lung bioengineering using bioreactors.

A simple segmentation and quantification method for numerical quantitative analysis of cells and tissues

BACKGROUND

Microscopic image analysis based on image processing is required for quantitative evaluation of decellularization. Existing methods are not widely used because of expensive commercial software, and machine learning-based techniques lack generality for decellularization because many high-resolution image data has to be processed.

OBJECTIVE

In this study, we developed an image processing algorithm for quantitative analysis of tissues and cells in a general microscopic image.

METHODS

The proposed method extracts the color images obtained by the microscope into reference images consisting of grayscale, red (R), green (G), and blue (B) information and transforms each into a binary image. The transformed images were extracted by separating the cells and tissues through outlier noise elimination, logical multiplication and labeling. In order to verify the method, decellularization of porcine arotic valve was performed by the electrical method. Slice samples were obtained by time and the proposed method was applied.

RESULTS

The experimental results show that the segmentation of cells and tissues, and quantitative analysis of the number of cells and changes in tissue area during the decellularization process was possible.

CONCLUSIONS

The proposed method shows that cell and tissue extraction and quantitative numerical analysis were possible in different brightness of microscopic images.

Injectable PNIPAM/Hyaluronic acid hydrogels containing multipurpose modified particles for cartilage tissue engineering: Synthesis, characterization, drug release and cell culture study

Novel injectable thermosensitive PNIPAM/hyaluronic acid hydrogels containing various amounts of chitosan-g-acrylic acid coated PLGA (ACH-PLGA) micro/nanoparticles were synthesized and designed to facilitate the regeneration of cartilage tissue. The ACH-PLGA particles were used in the hydrogels to play a triple role: first, the allyl groups on the chitosan-g-acrylic acid shell act as crosslinkers for PNIPAM and improved the mechanical properties of the hydrogel to mimic the natural cartilage tissue. Second, PLGA core acts as a carrier for the controlled release of chondrogenic small molecule melatonin. Third, they could reduce the syneresis of the thermosensitive hydrogel during gelation. The optimum hydrogel with the minimum syneresis and the maximum compression modulus was chosen for further evaluations. This hydrogel showed a great integration with the natural cartilage during the adhesion test, and also, presented an interconnected porous structure in scanning electron microscopy images. Eventually, to evaluate the cytotoxicity, mesenchymal stem cells were encapsulated inside the hydrogel. MTT and Live/Dead assay showed that the hydrogel improved the cells growth and proliferation as compared to the tissue culture polystyrene. Histological study of glycosaminoglycan (GAG) showed that melatonin treatment has the ability to increase the GAG synthesis. Overall, due to the improved mechanical properties, low syneresis, the ability of sustained drug release and also high bioactivity, this injectable hydrogel is a promising material system for cartilage tissue engineering.

Online measurement of oxygen enables continuous noninvasive evaluation of human-induced pluripotent stem cell (hiPSC) culture in a perfused 3D hollow-fiber bioreactor

For clinical and/or pharmaceutical use of human-induced pluripotent stem cells (hiPSCs), large cell quantities of high quality are demanded. Therefore, we combined the expansion of hiPSCs in closed, perfusion-based 3D bioreactors with noninvasive online monitoring of oxygen as culture control mechanism. Bioreactors with a cell compartment volume of 3 or 17 ml were inoculated with either 10 × 10⁶ or 50 × 10⁶ cells, and cells were expanded over 15 days with online oxygen and offline glucose and lactate measurements being performed. The CellTiter-Blue® Assay was performed at the end of the bioreactor experiments for indirect cell quantification. Model simulations enabled an estimation of cell numbers based on kinetic equations and experimental data during the 15-day bioreactor cultures. Calculated oxygen uptake rates (OUR), glucose consumption rates (GCR), and lactate production rates (LPR) revealed a highly significant correlation (p < 0.0001). Oxygen consumption, which was measured at the beginning and the end of the experiment, showed a strong culture growth in line with the OUR and GCR data. Furthermore, the yield coefficient of lactate from glucose and the OUR to GCR ratio revealed a shift from nonoxidative to oxidative metabolism. The presented results indicate that oxygen is equally as applicable as parameter for hiPSC expansion as glucose while providing an accurate real-time impression of hiPSC culture development. Additionally, oxygen measurements inform about the metabolic state of the cells. Thus, the use of oxygen online monitoring for culture control facilitates the translation of hiPSC use to the clinical setting.