Human Amniotic Membrane with Aligned Electrospun Fiber as Scaffold for Aligned Tissue Regeneration

Modulating the hAM/PCL Biocomposite for Expedited Wound Healing: A Chemical-Free Approach for Boosting Regenerative Potential

There is an arising need for effective wound dressings that retain the bioactivity of a cellular treatment, but without the high costs and complexities associated with manufacturing, storing, and applying cell-based products. As skin wound recovery is a dynamic and complicated process, a significant obstacle to the healing of skin wounds is the lack of an appropriate wound dressing that can imitate the microenvironment of healthy skin and prevent bacterial infection. It requires the well-orchestrated integration of biological and molecular events. In this study, we have fabricated full-thickness skin graft biocomposite membranes to target full-thickness skin excision wounds. We reinforced human amniotic membrane (hAM) with electrospun polycaprolactone (PCL) to develop composite membranes, namely, PCL/hAM and PCL/hAM/PCL. Composite membranes were compared for physical, biological, and mechanical properties with the native counterpart. PCL/hAM and PCL/hAM/PCL displayed improved stability and delayed degradation, which further synergically improved the rapid wound healing property of hAM, driven primarily by wound closure analysis and histological assessment. Moreover, PCL/hAM displayed a comparable cellular interaction to hAM. On application as a wound dressing, histological analysis demonstrated that hAM and PCL/hAM promoted early epidermis and dermis formation. Studies on in vivo wound healing revealed that although hAM accelerates cell development, the overall wound healing process is similar in PCL/hAM. This finding is further supported by the immunohistochemical analysis of COL-1/COL-3, CD-31, and TGF-β. Overall, this conjugated PCL and hAM-based membrane has considerable potential to be applied in skin wound healing. The facile fabrication of the PCL/hAM composite membrane provided the self-regenerating wound dressing with the desired mechanical strength as an ideal regenerative property for skin tissue regeneration.

Biomedical Application of Decellularized Scaffolds

Tissue loss and end-stage organ failure are serious health problems across the world. Natural and synthetic polymer scaffold material based artificial organs play an important role in the field of tissue engineering and organ regeneration, but they are not from the body and may cause side effects such as rejection. In recent years, the biomimetic decellularized scaffold based materials have drawn great attention in the tissue engineering field for their good biocompatibility, easy modification, and excellent organism adaptability. Therefore, in this review, we comprehensively summarize the application of decellularized scaffolds in tissue engineering and biomedicine in recent years. The preparation methods, modification strategies, construction of artificial tissues, and application in biomedical applications are discussed. We hope that this review will provide a useful reference for research on decellularized scaffolds and promote their application tissue engineering.

Emerging Strategies for the Biofabrication of Multilayer Composite Amniotic Membranes for Biomedical Applications

The amniotic membrane (AM) is the innermost part of the fetal placenta, which surrounds and protects the fetus. Due to its structural components (stem cells, growth factors, and proteins), AMs display unique biological properties and are a widely available and cost-effective tissue. As a result, AMs have been used for a century as a natural biocompatible dressing for healing corneal and skin wounds. To further increase its properties and expand its applications, advanced hybrid materials based on AMs have recently been developed. One existing approach is to combine the AM with a secondary material to create composite membranes. This review highlights the increasing development of new multilayer composite-based AMs in recent years and focuses on the benefits of additive manufacturing technologies and electrospinning, the most commonly used strategy, in expanding their use for tissue engineering and clinical applications. The use of AMs and multilayer composite-based AMs in the context of nerve regeneration is particularly emphasized and other tissue engineering applications are also discussed. This review highlights that these electrospun multilayered composite membranes were mainly created using decellularized or de-epithelialized AMs, with both synthetic and natural polymers used as secondary materials. Finally, some suggestions are provided to further enhance the biological and mechanical properties of these composite membranes.

Human amniotic membrane as a multifunctional biomaterial: recent advances and applications

The developing fetus is wrapped by a human amniotic membrane or amnion. Amnion is a promising human tissue allograft in clinical application because of its chemical composition, collagen-based, and mechanical properties of the extracellular matrix. In addition, amnion contains cells and growth factors; therefore, meets the essential parameters of tissue engineering. No donor morbidity, easy processing and storage, fewer ethical issue, anti-inflammatory, antioxidant, antibacterial, and non-immunogenic properties are other advantages of amnion usage. For these reasons, amnion can resolve some bottlenecks in the regenerative medicine issues such as tissue engineering and cell therapy. Over the last decades, biomedical applications of amnion have evolved from a simple sheet for skin or cornea repair to high-technology applications such as amnion nanocomposite, powder, or hydrogel for the regeneration of cartilage, muscle, tendon, and heart. Furthermore, amnion has anticancer as well as drug/cell delivery capacity. This review highlights various ancient and new applications of amnion in research and clinical applications, from regenerative medicine to cancer therapy, focusing on articles published during the last decade that also revealed information regarding amnion-based products. Challenges and future perspectives of the amnion in regenerative medicine are also discussed.

General consensus on multimodal functions and validation analysis of perinatal derivatives for regenerative medicine applications

Perinatal tissues, such as placenta and umbilical cord contain a variety of somatic stem cell types, spanning from the largely used hematopoietic stem and progenitor cells to the most recently described broadly multipotent epithelial and stromal cells. As perinatal derivatives (PnD), several of these cell types and related products provide an interesting regenerative potential for a variety of diseases. Within COST SPRINT Action, we continue our review series, revising and summarizing the modalities of action and proposed medical approaches using PnD products: cells, secretome, extracellular vesicles, and decellularized tissues. Focusing on the brain, bone, skeletal muscle, heart, intestinal, liver, and lung pathologies, we discuss the importance of potency testing in validating PnD therapeutics, and critically evaluate the concept of PnD application in the field of tissue regeneration. Hereby we aim to shed light on the actual therapeutic properties of PnD, with an open eye for future clinical application. This review is part of a quadrinomial series on functional/potency assays for validation of PnD, spanning biological functions, such as immunomodulation, anti-microbial/anti-cancer, anti-inflammation, wound healing, angiogenesis, and regeneration.

Advanced Nanofiber-Based Scaffolds for Achilles Tendon Regenerative Engineering

The Achilles tendon (AT) is responsible for running, jumping, and standing. The AT injuries are very common in the population. In the adult population (21–60 years), the incidence of AT injuries is approximately 2.35 per 1,000 people. It negatively impacts people’s quality of life and increases the medical burden. Due to its low cellularity and vascular deficiency, AT has a poor healing ability. Therefore, AT injury healing has attracted a lot of attention from researchers. Current AT injury treatment options cannot effectively restore the mechanical structure and function of AT, which promotes the development of AT regenerative tissue engineering. Various nanofiber-based scaffolds are currently being explored due to their structural similarity to natural tendon and their ability to promote tissue regeneration. This review discusses current methods of AT regeneration, recent advances in the fabrication and enhancement of nanofiber-based scaffolds, and the development and use of multiscale nanofiber-based scaffolds for AT regeneration.

A comprehensive review on methods for promotion of mechanical features and biodegradation rate in amniotic membrane scaffolds

Amniotic membrane (AM) is a biological tissue that surrounds the fetus in the mother's womb. It has pluripotent cells, immune modulators, collagen, cytokines with anti-fibrotic and anti-inflammatory effect, matrix proteins, and growth factors. In spite of the biological characteristics, some results have been released in preventing the adhesion on traumatized surfaces. Application of the AM as a scaffold is limited due to its low biomechanical resistance and rapid biodegradation. Therefore, for using the AM during surgery, its modification by different methods such as cross-linking of the membrane collagen is necessary, because the cross-linking is an effective way to reduce the rate of biodegradation of the biological materials. In addition, their cross-linking is likely an efficient way to increase the tensile properties of the material, so that they can be easily handled or sutured. In this regard, various methods related to cross-linking of the AM subsuming the composite materials, physical cross-linking, and chemical cross-linking with the glutraldehyde, carbodiimide, genipin, aluminum sulfate, etc. are reviewed along with its advantages and disadvantages in the current work.

Electrospun Fiber-Coated Human Amniotic Membrane: A Potential Angioinductive Scaffold for Ischemic Tissue Repair

Cardiac patch implantation helps maximize the paracrine function of grafted cells and serves as a reservoir of soluble proangiogenic factors required for the neovascularization of infarcted hearts. We have previously fabricated a cardiac patch, EF-HAM, composed of a human amniotic membrane (HAM) coated with aligned PLGA electrospun fibers (EF). In this study, we aimed to evaluate the biocompatibility and angiogenic effects of EF-HAM scaffolds with varying fiber thicknesses on the paracrine behavior of skeletal muscle cells (SkM). Conditioned media (CM) obtained from SkM-seeded HAM and EF-HAM scaffolds were subjected to multiplex analysis of angiogenic factors and tested on HUVECs for endothelial cell viability, migration, and tube formation analyses. All three different groups of EF-HAM scaffolds demonstrated excellent biocompatibility with SkM. CM derived from SkM-seeded EF-HAM 7 min scaffolds contained significantly elevated levels of proangiogenic factors, including angiopoietin-1, IL-8, and VEGF-C compared to plain CM, which was obtained from SkM cultured on the plain surface. CM obtained from all SkM-seeded EF-HAM scaffolds significantly increased the viability of HUVECs compared to plain CM after five days of culture. However, only EF-HAM 7 min CM induced a higher migration capacity in HUVECs and formed a longer and more elaborate capillary-like network on Matrigel compared with plain CM. Surface roughness and wettability of EF-HAM 7 min scaffolds might have influenced the proportion of skeletal myoblasts and fibroblasts growing on the scaffolds and subsequently potentiated the angiogenic paracrine function of SkM. This study demonstrated the angioinductive properties of EF-HAM composite scaffold and its potential applications in the repair and regeneration of ischemic tissues.

Decellularized human amniotic membrane reinforced by MoS2-Polycaprolactone nanofibers, a novel conductive scaffold for cardiac tissue engineering

In order to regenerate myocardial tissues with functional characteristics, we need to copy some properties of the myocardium, such as its extracellular matrix and electrical conductivity. In this study, we synthesized nanosheets of Molybdenum disulfide (MoS2), and integrated them into polycaprolactone (PCL) and electrospun on the surface of decellularized human amniotic membrane (DHAM) with the purpose of improving the scaffolds mechanical properties and electrical conductivity. For in vitro studies, we seeded the mouse embryonic cardiac cells, mouse Embryonic Cardiac Cells (mECCs), on the scaffolds and then studied the MoS2 nanocomposites by scanning electron microscopy and Raman spectroscopy. In addition, we characterized the DHAM/PCL and DHAM/PCL-MoS2 by SEM, transmission electron microscopy, water contact angle measurement, electrical conductivity, and tensile test. Besides, we confirmed the scaffolds are biocompatible by 3-(4, 5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide, MTT assay. Furthermore, by means of SEM images, it was shown that mECCs attached to the DHAM/PCL-MoS2 scaffold have more cell aggregations and elongated morphology. Furthermore, through the Real-Time PCR and immunostaining studies, we found out cardiac genes were maturated and upregulated, and they also included GATA-4, c-TnT, NKX 2.5, and alpha-myosin heavy chain in cells cultured on DHAM/PCL-MoS2 scaffold in comparison to DHAM/PCL and DHAM. Therefore, in terms of cardiac tissue engineering, DHAM nanofibrous scaffolds reinforced by PCL-MoS2 can be suggested as a proper candidate.

A Comparative Analysis of Ascorbic Acid-induced Cytotoxicity and Differentiation between SHED and DPSC

Aim:

The aim of this study was to compare dental pulp tissue in human exfoliated deciduous teeth (SHEDs) and dental pulp stem cells (DPSCs) in response to ascorbic acid as the sole osteoblast inducer.

Background:

A cocktail of ascorbic acid, β-glycerophosphate, and dexamethasone has been widely used to induce osteoblast differentiation. However, under certain conditions, β-glycerophosphate and dexamethasone can cause a decrease in cell viability in stem cells.

Objectives:

This study aims to determine the cytotoxic effect and potential of ascorbic acid as the sole inducer of osteoblast differentiation.

Methods:

Cytotoxicity analyses in the presence of 10-500 µg/mL ascorbic acid were performed in both cell types using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The concentrations below the IC50 (i.e., 10-150 µg/mL) were used to determine osteoblast differentiation potential of ascorbic acid using the alkaline phosphatase (ALP) assay, von Kossa staining, and reverse transcription-polymerase chain reaction.

Results:

SHEDs and DPSCs proliferated for 21 days, expressed a Mesenchymal Stem Cell (MSC) marker (CD73+), and did not express Hematopoietic Stem Cell (HSC) markers (CD34- and SLAMF1-). SHEDs had a higher range of IC50 values (215-240 µg/mL ascorbic acid), while the IC50 values for DPSCs were 177-211 µg/mL after 24-72 hours. SHEDs treated with 10-100 µg/mL ascorbic acid alone exhibited higher ALP-specific activity and a higher percentage of mineralisation than DPSCs. Both cell types expressed osteoblast markers on day 21, i.e., RUNX2+ and BSP+, in the presence of ascorbic acid.

Conclusions:

SHEDs survive at higher concentrations of ascorbic acid as compared to DPSC. The cytotoxic effect was only exhibited at ≥250 µg/mL ascorbic acid. In addition, SHED exhibited better ALP and mineralization activities, but lower osteoblast marker expression than DPSC in response to ascorbic acid as the sole inducer.

Aligned Poly(ε-caprolactone) Nanofibers Superimposed on Decellularized Human Amniotic Membrane Promoted Myogenic Differentiation of Adipose Derived Stem Cells

Objective

This study was designed to fabricate a suitable permanent scaffold for the normal aligned myotube formation and improve the process of myogenic differentiation of selected stem cells.

Materials and Methods

In this experimental study, an engineered scaffold composed of decellularized human amniotic membrane (DHAM) and electrospun fibers of poly(ε-caprolactone) (PCL) was fabricated and characterized. PCL nanofibers were superimposed on DHAM (PCL-DHAM) in two different patterns, including randomized fibers (Random) and aligned fibers (Aligned). Adipose derived stem cells (ADSCs) were isolated from adult Wistar rats and cultured on designed scaffold and induced to myotube differentiation. Using an MTT assay, the vitality of cells was determined. Then, myogenic cell differentiation was assessed using scan electron microscopy (SEM), immunofluorescence assay, and reverse transcription-polymerase chain reaction (RT-PCR).

Results

The mechanical properties of engineered PCL-DHAM composite improved significantly compared to DHAM as a control. The engineered PCL-DHAM promoted cell growth and high expression of myosin, Mhc2 and myogenin and thus enhanced the myotube formation.

Conclusion

These findings revealed that bio-composite membrane prepared from PCL nanofibers and DHAM, may represent a promising biomaterial as a desirable scaffold for applying in the bioengineered muscle repair.

Physicochemical Properties and Biocompatibility of Electrospun Polycaprolactone/Gelatin Nanofibers

Tissue-engineered substitutes have shown great promise as a potential replacement for current tissue grafts to treat tendon/ligament injury. Herein, we have fabricated aligned polycaprolactone (PCL) and gelatin (GT) nanofibers and further evaluated their physicochemical properties and biocompatibility. PCL and GT were mixed at a ratio of 100:0, 70:30, 50:50, 30:70, 0:100, and electrospun to generate aligned nanofibers. The PCL/GT nanofibers were assessed to determine the diameter, alignment, water contact angle, degradation, and surface chemical analysis. The effects on cells were evaluated through Wharton's jelly-derived mesenchymal stem cell (WJ-MSC) viability, alignment and tenogenic differentiation. The PCL/GT nanofibers were aligned and had a mean fiber diameter within 200-800 nm. Increasing the GT concentration reduced the water contact angle of the nanofibers. GT nanofibers alone degraded fastest, observed only within 2 days. Chemical composition analysis confirmed the presence of PCL and GT in the nanofibers. The WJ-MSCs were aligned and remained viable after 7 days with the PCL/GT nanofibers. Additionally, the PCL/GT nanofibers supported tenogenic differentiation of WJ-MSCs. The fabricated PCL/GT nanofibers have a diameter that closely resembles the native tissue's collagen fibrils and have good biocompatibility. Thus, our study demonstrated the suitability of PCL/GT nanofibers for tendon/ligament tissue engineering applications.

Human Amniotic Membrane: A review on tissue engineering, application, and storage

Human amniotic membrane (hAM) has been employed as scaffolding material in a wide range of tissue engineering applications, especially as a skin dressing and as a graft for corneal treatment, due to the structure of the extracellular matrix and excellent biological properties that enhance both wound healing and tissue regeneration. This review highlights recent work and current knowledge on the application of native hAM, and/or production of hAM-based tissue-engineered products to create scaffolds mimicking the structure of the native membrane to enhance the hAM performance. Moreover, an overview is presented on the available (cryo) preservation techniques for storage of native hAM and tissue-engineered products that are necessary to maintain biological functions such as angiogenesis, anti-inflammation, antifibrotic and antibacterial activity.

A bioactive multi-functional heparin-grafted aligned poly(lactide-co-glycolide)/curcumin nanofiber membrane to accelerate diabetic wound healing

Curcumin is reported to possess excellent efficacy to treat wounds that exhibit impaired healing. Heparin shows high affinity for many growth factors that are key biological mediators during the wound healing process. In this study, we aimed to prepare wound dressing membranes, for sustained release of an exogenous factor curcumin as well as sequestering endogenous growth factors at the wound site, to promote wound healing in diabetic rats. Toward this end, we prepared aligned curcumin-loaded poly(lactide-co-glycolide) (PLGA) nanofiber membranes (PC NFMs), followed by high density surface grafting of heparin to fabricate PLGA/curcumin (PCH) NFMs. Both PC and PCH NFMs show high tensile strength, low cytotoxicity and suitable water vapor transmission rate for application as wound dressings. Nonetheless, the PCH NFM shows higher curcumin release rate than PC due to enhanced hydrophilicity, which leads to higher cell migration rate and induced oxidative stress protection of HS68 fibroblast cells in vitro. In vivo study indicated the PCH exhibits the fastest wound closure rate among all membranes with accelerated re-epithelization rate, higher angiogenesis rate and more collagen deposition at the wound site. The accelerated and better skin tissue regeneration could be suggested to correlate with the multi-functionality of nanofibers, where grafted heparin attracting and stabilizing the growth factors important for wound healing in situ, together with relieving the high oxidative stress and the inflammatory cascade from released curcumin during diabetic wound healing.

An aligned porous electrospun fibrous scaffold with embedded asiatic acid for accelerating diabetic wound healing

The diabetic non-healing wound is one of the most common complications of diabetics. The long-term stimulus of oxidative stress, inflammation and infection caused by the hyperglycemic microenvironment in the wound site always leads to a delayed healing process of the diabetic wound. To address this issue, in this study, we prepared an asiatic acid (AA)-embedded aligned porous poly(l-lactic acid) (PLLA) electrospun fibrous scaffold (AA-PL) for accelerating diabetic wound healing. The results showed that the electrospun fibers with nanopores on the surfaces were aligned in a single direction, while the AA was well embedded in the fibers and can be continuously released from them. The in vitro results revealed that the AA-PL scaffolds can effectively alleviate the H2O2-induced oxidative stress damage to HaCat cells and downregulate the LPS-induced pro-inflammatory cytokine (IL-1β, TNF-α, IL6) gene expression in RAW 264.7 macrophage cells. Moreover, the growth of E. coli and S. aureus could be inhibited by the AA-PL scaffolds. The in vivo study further demonstrated that the AA-PL scaffolds can accelerate the re-epithelization, angiogenesis and extracellular matrix formation of a wound by relieving the high oxidative stress, inflammation and infection in the diabetic wound site. This study suggests that the combination of hierarchical structures (nanopores on the aligned fibers) with the controllable release of AA from the scaffolds is an efficient and innovative strategy for the treatment of diabetic non-healing wounds.

Decellularized Extracellular Matrix for Bioengineering Physiomimetic 3D in Vitro Tumor Models

Recent advances in the extraction and purification of decellularized extracellular matrix (dECM) obtained from healthy or malignant tissues open new avenues for engineering physiomimetic 3D in vitro tumor models, which closely recapitulate key biomolecular hallmarks and the dynamic cancer cell-ECM interactions in the tumor microenvironment. We review current and upcoming methodologies for chemical modification of dECM-based biomaterials and advanced bioprocessing into organotypic 3D solid tumor models. A comprehensive review of disruptive advances and shortcomings of exploring dECM-based biomaterials for recapitulating the native tumor-supporting matrix is also provided. We hope to drive the discussion on how 3D dECM testing platforms can be leveraged for generating microphysiological tumor surrogates that generate more robust and predictive data on therapeutic bioperformance.

Electrospun Fibre Webs Templated Synthesis of Mineral Scaffolds Based on Calcium Phosphates and Barium Titanate

The current work focuses on the development of mineral scaffolds with complex composition and controlled morphology by using a polymeric template in the form of nonwoven fibre webs fabricated through electrospinning. By a cross-linking process, gelatine fibres stable in aqueous solutions were achieved, these being further subjected to a loading step with two types of mineral phases: calcium phosphates deposited by chemical reaction and barium titanate nanoparticles as decoration on the previously achieved structures. Thus, hybrid materials were obtained and subsequently processed in terms of freeze-drying and heat treating with the purpose of burning the template and consolidating the mineral part as potential bone implants with improved biological response by external stimulation. The results confirmed the tunable morphology, as well as the considerable applicability of both as-prepared and final samples for the development of medical devices, which encourages the continuation of research in the direction of assessing the synergistic contribution of barium titanate domains polarisation/magnetisation by external applied fields.

Graft alignment impacts the regenerative response of skeletal muscle after volumetric muscle loss in a rat model

A key event in the etiology of volumetric muscle loss (VML) injury is the bulk loss of structural cues provided by the underlying extracellular matrix (ECM). To re-establish the lost cues, there is broad consensus within the literature supporting the utilization of implantable scaffolding. However, while scaffold based regenerative medicine strategies have shown potential, there remains a significant amount of outcome variability observed across the field. We suggest that an overlooked source of outcome variability is differences in scaffolding architecture. The goal of this study was to test the hypothesis that implant alignment has a significant impact on genotypic and phenotypic outcomes following the repair of VML injuries. Using a rat VML model, outcomes across three autograft implant treatment groups (aligned implants, 45° misaligned, and 90° misaligned) and two recovery time points (2 weeks and 12 weeks) were examined (n = 6-8/group). At 2 weeks post-repair there were no significant differences in muscle mass and torque recovery between the treatment groups, however we did observe a significant upregulation of MyoD (2.5 fold increase) and Pax7 (2 fold increase) gene expression as well as the presence of immature myofibers at the implant site for those animals repaired with aligned autografts. By 12 weeks post-repair, functional and structural differences between the treatment groups could be detected. Aligned autografts had significantly greater mass and torque recovery (77 ± 10% of normal) when compared to 45° and 90° misaligned autografts (64 ± 10% and 61 ± 11%, respectively). Examination of tissue structure revealed extensive fibrosis and a significant increase in non-contractile tissue area fraction for only those animals treated using misaligned autografts. When taken together, the results suggest that implant graft orientation has a significant impact on in-vivo outcomes and indicate that the effect of graft alignment on muscle phenotype may be mediated through genotypic changes to myogenesis and fibrosis at the site of injury and repair. STATEMENT OF SIGNIFICANCE: A key event in the etiology of volumetric muscle loss injury is the bulk loss of architectural cues provided by the underlying extracellular matrix. To re-establish the lost cues, there is broad consensus within the literature supporting the utilization of implantable scaffolding. Yet, although native muscle is a highly organized tissue with network and cellular alignment in the direction of contraction, there is little evidence within the field concerning the importance of re-establishing native architectural alignment. The results of this study suggest that critical interactions exist between implant and native muscle alignment cues during healing, which influence the balance between myogenesis and fibrosis. Specifically, it appears that alignment of implant architectural cues with native muscle cues is necessary to create a pro-myogenic environment and contractile force recovery. The results also suggest that misaligned cues may be pathological, leading to fibrosis and poor contractile force recovery.

Tazarotene Released from Aligned Electrospun Membrane Facilitates Cutaneous Wound Healing by Promoting Angiogenesis

Wound treatment is a long-lasting clinical issue. Poor angiogenesis leading to delayed wound closure causes huge challenges for healing. Functional electrospun membranes have been established as an efficient strategy to promote wound recovery by protecting and improving vascular regeneration. Here, we aimed to investigate the effect of tazarotene, an active drug for angiogenesis, loaded in aligned electrospun nanofibrous barrier on a soft tissue wound. This aligned membrane was arranged in a single direction, and tazarotene could be released from its nanofibers sustainably. The in vitro study demonstrated that compared with the random drug-loaded or other control groups, the aligned tazarotene-loaded membranes [poly-caprolactone (PCL)/AT] could stimulate proliferation, migration, angiogenesis, and vascular endothelial growth factor secretion and its gene expression of human umbilical vein endothelial cells. Furthermore, the in vivo model showed that the prepared tazarotene-loaded aligned membrane significantly accelerated the speed of healing, improved the neovascularization and re-epithelialization, and inhibited the inflammatory reaction in the wound area. All these results above indicated that the PCL/AT nanofibrous dressing, which could promote angiogenesis because of both stimulation of structure and chemical signals, is a promising wound-caring material.

Fabrication and Characterization of Carboxymethyl Starch/Poly(l-Lactide) Acid/β-Tricalcium Phosphate Composite Nanofibers via Electrospinning

A natural polymer of carboxymethyl starch (CMS) was used in combination with the inorganic mineral of β-Tricalcium Phosphate (β-TCP) and Poly l-lactide (PLLA) to prepare composite nanofibers with the potential to be used as a biomedical membrane. β-TCP contents varied in the range of 0.25% to 1% in the composition of PLLA and CMS. A mixed composition of these organic and inorganic materials was electro-spun to produce composite nanofibers. Morphological investigation indicated that smooth and uniform nanofibers could be produced via this technique. The average of the nanofiber diameters was slightly increased from 190 to 265 nm with the β-TCP content but some agglomeration of particles began to impede in the fiber at a higher content of β-TCP. It was observed that the fibers were damaged at a higher content of β-TCP nanoparticles. With the presence of higher β-TCP, the wettability of the PLLA was also improved, as indicated by the water contact angle measurement from 127.3° to 118°. The crystallization in the composite decreased, as shown in the changes in glass transition (T_g) and melting temperature (T_m) by differential scanning calorimeter (DSC) and X-ray diffraction analysis. Increases in β-TCP contributed to weaker mechanical strength, from 8.5 to 5.7 MPa, due to imperfect fiber structure.

Tissue-Engineered Grafts from Human Decellularized Extracellular Matrices: A Systematic Review and Future Perspectives

Tissue engineering and regenerative medicine involve many different artificial and biologic materials, frequently integrated in composite scaffolds, which can be repopulated with various cell types. One of the most promising scaffolds is decellularized allogeneic extracellular matrix (ECM) then recellularized by autologous or stem cells, in order to develop fully personalized clinical approaches. Decellularization protocols have to efficiently remove immunogenic cellular materials, maintaining the nonimmunogenic ECM, which is endowed with specific inductive/differentiating actions due to its architecture and bioactive factors. In the present paper, we review the available literature about the development of grafts from decellularized human tissues/organs. Human tissues may be obtained not only from surgery but also from cadavers, suggesting possible development of Human Tissue BioBanks from body donation programs. Many human tissues/organs have been decellularized for tissue engineering purposes, such as cartilage, bone, skeletal muscle, tendons, adipose tissue, heart, vessels, lung, dental pulp, intestine, liver, pancreas, kidney, gonads, uterus, childbirth products, cornea, and peripheral nerves. In vitro recellularizations have been reported with various cell types and procedures (seeding, injection, and perfusion). Conversely, studies about in vivo behaviour are poorly represented. Actually, the future challenge will be the development of human grafts to be implanted fully restored in all their structural/functional aspects.