Construction of Vascularized Oral Mucosa Equivalents Using a Layer-by-Layer Cell Coating Technology

Biofabrication Strategies for Oral Soft Tissue Regeneration

Gingival recession, a prevalent condition affecting the gum tissues, is characterized by the exposure of tooth root surfaces due to the displacement of the gingival margin. This review explores conventional treatments, highlighting their limitations and the quest for innovative alternatives. Importantly, it emphasizes the critical considerations in gingival tissue engineering leveraging on cells, biomaterials, and signaling factors. Successful tissue-engineered gingival constructs hinge on strategic choices such as cell sources, scaffold design, mechanical properties, and growth factor delivery. Unveiling advancements in recent biofabrication technologies like 3D bioprinting, electrospinning, and microfluidic organ-on-chip systems, this review elucidates their precise control over cell arrangement, biomaterials, and signaling cues. These technologies empower the recapitulation of microphysiological features, enabling the development of gingival constructs that closely emulate the anatomical, physiological, and functional characteristics of native gingival tissues. The review explores diverse engineering strategies aiming at the biofabrication of realistic tissue-engineered gingival grafts. Further, the parallels between the skin and gingival tissues are highlighted, exploring the potential transfer of biofabrication approaches from skin tissue regeneration to gingival tissue engineering. To conclude, the exploration of innovative biofabrication technologies for gingival tissues and inspiration drawn from skin tissue engineering look forward to a transformative era in regenerative dentistry with improved clinical outcomes.

Recent trends and perspectives in reconstruction and regeneration of intra/extra-oral wounds using tissue-engineered oral mucosa equivalents

Many conditions, including cancer, trauma, and congenital anomalies, can damage the oral mucosa. Multiple cultures of oral mucosal cells have been used for biocompatibility tests and oral biology studies. In recent decades, the clinical translation of tissue-engineered products has progressed significantly in developing tangible therapies and inspiring advancements in medical science. However, the reconstruction of an intraoral mucosa defect remains a significant challenge. Despite the drawbacks of donor-site morbidity and limited tissue supply, the use of autologous oral mucosa remains the gold standard for oral mucosa reconstruction and repair. Tissue engineering offers a promising solution for repairing and reconstructing oral mucosa tissues. Cell- and scaffold-based tissue engineering approaches have been employed to treat various soft tissue defects, suggesting the potential clinical use of tissue-engineered oral mucosa (TEOMs). In this review, we first cover the recent trends in the reconstruction and regeneration of extra-/intra-oral wounds using TEOMs. Next, we describe the current status and challenges of TEOMs. Finally, future strategic approaches and potential technologies to support the advancement of TEOMs for clinical use are discussed.

Oral Mucosa Models to Evaluate Drug Permeability

Due to its numerous advantages, such as excellent drug accessibility, rapid absorption, and bypass of first-pass metabolism, the route of drug administration that involves crossing the oral mucosa is highly favored. As a result, there is significant interest in investigating the permeability of drugs through this region. The purpose of this review is to describe the various ex vivo and in vitro models used to study the permeability of conveyed and non-conveyed drugs through the oral mucosa, with a focus on the most effective models. Currently, there is a growing need for standardized models of this mucosa that can be used for developing new drug delivery systems. Oral Mucosa Equivalents (OMEs) may provide a promising future perspective as they are capable of overcoming limitations present in many existing models.

Construction of Human Three-Dimensional Lung Model Using Layer-by-Layer Method

The respiratory tract is one of the frontline barriers for biological defense. Lung epithelial intercellular adhesions provide protection from bacterial and viral infections and prevent invasion into deep tissues by pathogens. Dysfunction of lung epithelial intercellular adhesion caused by pathogens is associated with development of several diseases, such as acute respiratory distress syndrome, pneumonia, and asthma. To elucidate the pathological mechanism of respiratory infections, two-dimensional cell cultures and animal models are commonly used, although are not useful for evaluating host specificity or human biological response. With the rapid progression and worldwide spread of severe acute respiratory syndrome coronavirus-2, there is increasing interest in the development of a three-dimensional (3D) in vitro lung model for analyzing interactions between pathogens and hosts. However, some models possess unclear epithelial polarity or insufficient barrier functions and need the use of complex technologies, have high cost, and long cultivation terms. We previously reported about the fabrication of 3D cellular multilayers using a layer-by-layer (LbL) cell coating technique with extracellular matrix protein, fibronectin (FN), and gelatin (G). In the present study, such a LbL cell coating technique was utilized to construct a human 3D lung model in which a monolayer of the human lower airway epithelial adenocarcinoma cell line Calu-3 cells was placed on 3D-cellular multilayers composed of FN-G-coated human primary pulmonary fibroblast cells. The 3D lung model thus constructed demonstrated an epithelial-fibroblast layer that maintained uniform thickness until 7 days of incubation. Moreover, expressions of E-cadherin, ZO-1, and mucin in the epithelial layer were observed by immunohistochemical staining. Epithelial barrier integrity was evaluated using transepithelial electrical resistance values. The results indicate that the present constructed human 3D lung model is similar to human lung tissues and also features epithelial polarity and a barrier function, thus is considered useful for evaluating infection and pathological mechanisms related to pneumonia and several pathogens. Impact statement A novel in vitro model of lung tissue was established. Using a layer-by-layer cell coating technique, a three-dimensional cultured lung model was constructed. The present novel model was shown to have epithelial polarity and chemical barrier functions. This model may be useful for investigating interaction pathogens and human biology.

Oral mucosa equivalents, prevascularization approaches, and potential applications

BACKGROUND

Oral mucosa equivalents (OMEs) have been used as in vitro models (eg, for studies of human oral mucosa biology and pathology, toxicological and pharmacological tests of oral care products), and clinically to treat oral defects. However, the human oral mucosa is a highly vascularized tissue and implantation of large OMEs can fail due to a lack of vascularization. To develop equivalents that better resemble the human oral mucosa and increase the success of implantation to repair large-sized defects, efforts have been made to prevascularize these constructs.

PURPOSE

The aim of this narrative review is to provide an overview of the human oral mucosa structure, common approaches for its reconstruction, and the development of OMEs, their prevascularization, and in vitro and clinical potential applications.

STUDY SELECTION

Articles on non-prevascularized and prevascularized OMEs were included, since the development and applications of non-prevascularized OMEs are a foundation for the design, fabrication, and optimization of prevascularized OMEs.

CONCLUSIONS

Several studies have reported the development and in vitro and clinical applications of OMEs and only a few were found on prevascularized OMEs using different approaches of fabrication and incorporation of endothelial cells, indicating a lack of standardized protocols to obtain these equivalents. However, these studies have shown the feasibility of prevascularizing OMEs and their implantation in animal models resulted in enhanced integration and healing. Vascularization in tissue equivalents is still a challenge, and optimization of cell culture conditions, biomaterials, and fabrication techniques along with clinical studies is required.

Strategies for vascularized skin models in vitro

As the largest organ of the human body, the skin has a complex multi-layered structure. The composition of the skin includes cells, extracellular matrix (ECM), vascular networks, and other appendages. Because of the shortage of donor sites, skin substitutes are of great significance in the field of skin tissue repair. Moreover, skin models for disease research, drug screening, and cosmetic testing fall far short of the demand. Skin tissue engineering has made remarkable progress in developing skin models over the years. However, there are still several problems to be resolved. One of the crucial aspects is the lack of vascular systems for nutrient transport and waste disposal. Here, we will focus on the discussion and analysis of advanced manufacturing strategies for prevascularized skin, such as a scaffold-based method, cell coating technology, cell sheet engineering, skin-on-a-chip, and three-dimensional (3D) bioprinting. These key challenges, which restrict the prevascularized skin and provide perspectives on future directions will also be highlighted.

Bioengineering in salivary gland regeneration

Salivary gland (SG) dysfunction impairs the life quality of many patients, such as patients with radiation therapy for head and neck cancer and patients with Sjögren’s syndrome. Multiple SG engineering strategies have been considered for SG regeneration, repair, or whole organ replacement. An in-depth understanding of the development and differentiation of epithelial stem and progenitor cells niche during SG branching morphogenesis and signaling pathways involved in cell–cell communication constitute a prerequisite to the development of suitable bioengineering solutions. This review summarizes the essential bioengineering features to be considered to fabricate an engineered functional SG model using various cell types, biomaterials, active agents, and matrix fabrication methods. Furthermore, recent innovative and promising approaches to engineering SG models are described. Finally, this review discusses the different challenges and future perspectives in SG bioengineering.

Microbial-stem cell interactions in periodontal disease

Periodontitis is initiated by hyper-inflammatory responses in the periodontal tissues that generate dysbiotic ecological changes within the microbial communities. As a result, supportive tissues of the tooth are damaged and periodontal attachment is lost. Gingival recession, formation of periodontal pockets with the presence of bleeding, and often suppuration and/or tooth mobility are evident upon clinical examination. These changes may ultimately lead to tooth loss. Mesenchymal stem cells (MSCs) are implicated in controlling periodontal disease progression and have been shown to play a key role in periodontal tissue homeostasis and regeneration. Evidence shows that MSCs interact with subgingival microorganisms and their by-products and modulate the activity of immune cells by either paracrine mechanisms or direct cell-to-cell contact. The aim of this review is to reveal the interactions that take place between microbes and in particular periodontal pathogens and MSCs in order to understand the factors and mechanisms that modulate the regenerative capacity of periodontal tissues and the ability of the host to defend against putative pathogens. The clinical implications of these interactions in terms of anti-inflammatory and paracrine responses of MSCs, anti-microbial properties and alterations in function including their regenerative potential are critically discussed based on literature findings. In addition, future directions to design periodontal research models and study ex vivo the microbial-stem cell interactions are introduced.

Unmet Needs and Perspectives in Oral Cancer Prevention

Oral potentially malignant disorders (OPMD) may precede oral squamous cell carcinoma (OSCC). Reported rates of malignant transformation of OPMD range from 3 to 50%. While some clinical, histological, and molecular factors have been associated with a high-risk OPMD, they are, to date, insufficiently accurate for treatment decision-making. Moreover, this range highlights differences in the clinical definition of OPMD, variation in follow-up periods, and molecular and biological heterogeneity of OPMD. Finally, while treatment of OPMD may improve outcome, standard therapy has been shown to be ineffective to prevent OSCC development in patients with OPMD. In this perspective paper, several experts discuss the main challenges in oral cancer prevention, in particular the need to (i) to define an OPMD classification system by integrating new pathological and molecular characteristics, aiming (ii) to better identify OPMD at high risk of malignant transformation, and (iii) to develop treatment strategies to eradicate OPMD or prevent malignant transformation.

Generation of a novel model of bioengineered human oral mucosa with increased vascularization potential

Objective

The aim of this study was to generate novel models of bioartificial human oral mucosa with increased vascularization potential for future use as an advanced therapies medicinal product, by using different vascular and mesenchymal stem cell sources.

Background

Oral mucosa substitutes could contribute to the clinical treatment of complex diseases affecting the oral cavity. Although several models of artificial oral mucosa have been described, biointegration is a major issue that could be favored by the generation of novel substitutes with increased vascularization potential once grafted in vivo.

Methods

Three types of mesenchymal stem cells (MSCs) were obtained from adipose tissue, bone marrow, and dental pulp, and their in vitro potential was evaluated by inducing differentiation to the endothelial lineage using conditioning media. Then, 3D models of human artificial oral mucosa were generated using biocompatible fibrin‐agarose biomaterials combined with human oral mucosa fibroblasts and each type of MSC before and after induction to the endothelial lineage, using human umbilical vein endothelial cells (HUVEC) as controls. The vascularization potential of each oral mucosa substitute was assessed in vitro and in vivo in nude mice.

Results

In vitro induction of MSCs kept in culture was able to increase the expression of VEGF, CD31, and vWF endothelial markers, especially in bone marrow and dental pulp‐MSCs, and numerous proteins with a role in vasculogenesis become overexpressed. Then, in vivo grafting resulted in a significant increase in blood vessels formation at the interface area between the graft and the host tissues, with significantly positive expression of VEGF, CD31, vWF, and CD34 as compared to negative controls, especially when pre‐differentiated MSCs derived from bone marrow and dental pulp were used. In addition, a significantly higher number of cells committed to the endothelial lineage expressing the same endothelial markers were found within the bioartificial tissue.

Conclusion

Our results suggest that the use of pre‐differentiated MSCs could contribute to a rapid generation of a vascular network that may favor in vivo biointegration of bioengineered human oral mucosa substitutes.

A Scarless Healing Tale: Comparing Homeostasis and Wound Healing of Oral Mucosa With Skin and Oesophagus

Epithelial tissues are the most rapidly dividing tissues in the body, holding a natural ability for renewal and regeneration. This ability is crucial for survival as epithelia are essential to provide the ultimate barrier against the external environment, protecting the underlying tissues. Tissue stem and progenitor cells are responsible for self-renewal and repair during homeostasis and following injury. Upon wounding, epithelial tissues undergo different phases of haemostasis, inflammation, proliferation and remodelling, often resulting in fibrosis and scarring. In this review, we explore the phenotypic differences between the skin, the oesophagus and the oral mucosa. We discuss the plasticity of these epithelial stem cells and contribution of different fibroblast subpopulations for tissue regeneration and wound healing. While these epithelial tissues share global mechanisms of stem cell behaviour for tissue renewal and regeneration, the oral mucosa is known for its outstanding healing potential with minimal scarring. We aim to provide an updated review of recent studies that combined cell therapy with bioengineering exporting the unique scarless properties of the oral mucosa to improve skin and oesophageal wound healing and to reduce fibrotic tissue formation. These advances open new avenues toward the ultimate goal of achieving scarless wound healing.

Effect of 3D-Fibroblast Dermis Constructed by Layer-by-Layer Cell Coating Technique on Tight Junction Formation and Function in Full-Thickness Skin Equivalent

Human skin equivalents (HSEs) consisting of an epidermis and dermis have been used as promising tools for drug evaluation and for clinical applications in regenerative medicine. Normal human dermal fibroblasts (NHDFs) are essential for the fabrication of HSEs because they play an important role in the maturation of the epidermis. Recently, epidermal tight junctions (TJs), which are complex cell-cell junctions, have attracted much attention as a second barrier and regulator for other barrier functions. In a previous study, we revealed the expression of TJ-related proteins and the time course of formation of TJ structure in the HSE (layer-by-layer (LbL)-three-dimensional (3D) Skin) constructed by layer-by-layer (LbL) cell coating technique that have a unique dermis consisting of NHDFs only (3D-fibroblast dermis). However, the effect of the 3D-fibroblast dermis on the formation of functional epidermal TJs is unknown. In this study, we investigated the effect of the 3D-fibroblast dermis on the expression of TJ-related proteins and TJ function in LbL-3D Skin. We demonstrated that the 3D-fibroblast dermis affects the long-term expression of TJ-related proteins and the formation of TJ with barrier function in the epidermis. These results show that the 3D-fibroblast dermis in LbL-3D Skin contributes to the formation and maintenance of functional TJs as in native human skin by direct contact with KCs.

Observation of a tight junction structure generated in LbL-3D skin reconstructed by layer-by-layer cell coating technique

Tissue-engineered skin equivalents are reconstructed the functions of human skin and can be used as an alternative to animal experiments in basic study or as cultured skin for regenerative medicine. Recent studies confirmed that epidermal tight junctions (TJs), which are complex intercellular junctions formed in the stratum granulosum of human skin, play an important part in the formation of the skin barrier function. In well-formed reconstructed human skin models, there are several reports on the expression of TJ proteins and their localization in epidermal layer, however, the morphological features of TJ, showing tight junctional contacts and the process of TJ formation have yet to be investigated. In this study, we systematically examined and identified TJ-related proteins and TJ structure in three-dimensional (3D) human skin equivalents reconstructed by layer-by-layer (LbL) cell coating technique (LbL-3D Skin). We demonstrate localization of TJ-related proteins and time course of formation of TJ structure with typical junctional morphology in LbL-3D Skin. These data provide evidence that the LbL-3D Skin is an in vitro model with structure and function extremely similar to living skin.

Vascularization strategies in tissue engineering approaches for soft tissue repair

Insufficient vascularization during tissue repair is often associated with poor clinical outcomes. This is a concern especially when patients have critical-sized injuries, where the size of the defect restricts vascularity, or even in small defects that have to be treated under special conditions, such as after radiation therapy (relevant to tumor resection) that hinders vascularity. In fact, poor vascularization is one of the major obstacles for clinical application of tissue engineering methods in soft tissue repair. As a key issue, lack of graft integration, caused by inadequate vascularization after implantation, can lead to graft failure. Moreover, poor vascularization compromises the viability of cells seeded in deep portions of scaffolds/graft materials, due to hypoxia and insufficient nutrient supply. In this article we aim to review vascularization strategies employed in tissue engineering techniques to repair soft tissues. For this purpose, we start by providing a brief overview of the main events during the physiological wound healing process in soft tissues. Then, we discuss how tissue repair can be achieved through tissue engineering, and considerations with regards to the choice of scaffold materials, culture conditions, and vascularization techniques. Next, we highlight the importance of vascularization, along with strategies and methods of prevascularization of soft tissue equivalents, particularly cell-based prevascularization. Lastly, we present a summary of commonly used in vitro methods during the vascularization of tissue-engineered soft tissue constructs.

In vitro three-dimensional organotypic culture models of the oral mucosa

Three-dimensional, organotypic models of the oral mucosa have been developed to study a wide variety of phenomena occurring in the oral cavity. Although a number of models have been developed in academic research labs, only a few models have been commercialized. Models from academic groups offer a broader range of phenotypes while the commercial models are more focused on the oral and gingival mucosa. The commercialized models are manufactured under highly controlled conditions and meet the requirements of quality standards, which leads to high levels of reproducibility. These in vitro models have been used to evaluate the irritancy of oral care products such as toothpastes, mouthwashes, and mucoadhesives. The effects of cigarette smoke on oral cavity tissues have been studied and compared to those of e-cigarettes. Oral tissue models have facilitated investigation of the mechanisms of oral mucositis and oral candidiasis and have been used to examine transbuccal drug delivery rates and the absorption of nanoparticles. Infection studies have investigated the effects of HIV-1 along with the effects of commensal and pathogenic bacteria. More recently, a differentiated oral tissue model has been shown to express the ACE2 receptor, which is known to be important for the receptor-mediated entry of the SARS-CoV-2 coronavirus into human cells and tissues. Hence, oral mucosal models may find application in determining whether viral infection of the oral mucosa is possible and whether such infection has implications vis-a-vis the current COVID-19 pandemic. As is apparent, these models are used in a broad variety of applications and often offer advantages versus animal models in terms of reproducibility, avoiding species extrapolation, and the ethical concerns related to human and animal experimentation. The goals of this paper are to review commercially available models of the human buccal and gingival mucosa and highlight their use to gain a better understanding of a broad range of phenomena affecting tissues in the oral cavity.

Building a Functional Salivary Gland for Cell-Based Therapy: More than Secretory Epithelial Acini

A few treatment options exist for patients experiencing xerostomia due to hyposalivation that occurs as a result of disease or injury to the gland. An opportunity for a permanent solution lies in the field of salivary gland replacement through tissue engineering. Recent success emboldens in the vision of producing a tissue-engineered salivary gland composed of differentiated salivary epithelial cells that are able to differentiate to form functional units that produce and deliver saliva to the oral cavity. This vision is augmented by advances in understanding cellular mechanisms that guide branching morphogenesis and salivary epithelial cell polarization in both acinar and ductal structures. Growth factors and other guidance cues introduced into engineered constructs help to develop a more complex glandular structure that seeks to mimic native salivary gland tissue. This review describes the separate epithelial phenotypes that make up the gland, and it describes their relationship with the other cell types such as nerve and vasculature that surround them. The review is organized around the links between the native components that form and contribute to various aspects of salivary gland development, structure, and function and how this information can drive the design of functional tissue-engineered constructs. In addition, we discuss the attributes of various biomaterials commonly used to drive function and form in engineered constructs. The review also contains a current description of the state-of-the-art of the field, including successes and challenges in creating materials for preclinical testing in animal models. The ability to integrate biomolecular cues in combination with a range of materials opens the door to the design of increasingly complex salivary gland structures that, once accomplished, can lead to breakthroughs in other fields of tissue engineering of epithelial-based exocrine glands or oral tissues.

Supersensitive Layer-by-Layer 3D Cardiac Tissues Fabricated on a Collagen Culture Vessel Using Human-Induced Pluripotent Stem Cells

Background: The fabrication of artificial cardiac tissue is an active area of research due to the shortage of donors for heart transplantation and for drug development. In our previous study, we fabricated vascularized three-dimensional (3D) cardiac tissue by layer-by-layer (LbL) and cell accumulation technique. However, it was not able to develop sufficient function because it was cultured on a hard plastic substrate. Experiment: Herein, we report the fabrication of high-performance 3D cardiac tissue by LbL and cell accumulation technique using a collagen culture vessel. Results: By using a collagen culture vessel, 3D cardiac tissue could be fabricated on a collagen culture vessel and this tissue showed high functionality due to improved interaction with the vessel. In the case of the plastic culture insert, 3D cardiac tissue was found to be peeled off, but this did not occur on the collagen culture vessel. In addition, the 3D cardiac tissue fabricated on a collagen culture vessel showed contraction that was 20 times larger than the tissue fabricated on a plastic culture insert. As a result of evaluation of cardiotoxicity using E-4031, the sensitivity of arrhythmia detection was increased by using collagen culture vessel. Conclusions: These results are expected to contribute to transplantation and drug discovery research as a 3D cardiac tissue model with a function similar to that of the living heart.

Three-Dimensional In Vitro Oral Mucosa Models of Fungal and Bacterial Infections

Oral mucosa is the target tissue for many microorganisms involved in periodontitis and other infectious diseases affecting the oral cavity. Three-dimensional (3D) in vitro and ex vivo oral mucosa equivalents have been used for oral disease modeling and investigation of the mechanisms of oral bacterial and fungal infections. This review was conducted to analyze different studies using 3D oral mucosa models for the evaluation of the interactions of different microorganisms with oral mucosa. In this study, based on our inclusion criteria, 43 articles were selected and analyzed. Different types of 3D oral mucosa models of bacterial and fungal infections were discussed in terms of the biological system used, culture conditions, method of infection, and the biological endpoints assessed in each study. The critical analysis revealed some contradictory reports in this field of research in the literature. Challenges in recovering bacteria from oral mucosa models were further discussed, suggesting possible future directions in microbiomics, including the use of oral mucosa-on-a-chip. The potential use of these 3D tissue models for the evaluation of the effects of antiseptic agents on bacteria and oral mucosa was also addressed. This review concluded that there were many aspects that would require optimization and standardization with regard to using oral mucosal models for infection by microorganisms. Using new technologies-such as microfluidics and bioreactors-could help to reproduce some of the physiologically relevant conditions and further simulate the clinical situation. Impact statement Tissue-engineered or commercial models of the oral mucosa are very useful for the study of diseases that involve the interaction of microorganisms and oral epithelium. In this review, challenges in recovering bacteria from oral mucosa models, the potential use of these three-dimensional tissue models for the evaluation of the effects of antiseptic agents, and future directions in microbiomics are discussed.