Overexpression of cytoplasmic dynein's globular head causes a collapse of the interphase microtubule network in Dictyostelium

Katnip is needed to maintain microtubule function and lysosomal delivery to autophagosomes and phagosomes

The efficient delivery of lysosomes is essential for many cell functions, such as the degradation of unwanted intracellular components by autophagy and the killing and digestion of extracellular microbes within phagosomes. Using the amoeba Dictyostelium discoideum, we find that cells lacking Katnip (Katanin interacting protein) have a general defect in lysosomal delivery and although they make autophagosomes and phagosomes correctly, cells are then unable to digest them. Katnip is largely unstudied yet highly conserved across evolution. Previously studies found that Katnip mutations in animals cause defects in cilia structure. Here we show that Katnip plays a more general role in maintaining microtubule function. We find that loss of Katnip has no overall effect on microtubule dynamics or organization, but is important for the transport and degradation of endocytic cargos. Strikingly, Katnip mutants become highly sensitive to GFP-tubulin expression, which leads to microtubule tangles, defective anaphase extension, and slow cell growth. Our findings establish a general role for Katnip in regulating microtubule function, beyond the roles previously described in cilia. We speculate this is via a key function in microtubule repair, needed to maintain endosomal trafficking and lysosomal degradation.

Fast and Easy Transient Mammalian Cell Expression and Purification of Cytoplasmic Dynein

Recombinant protein expression has been key to studying dynein's mechanochemistry and structure-function relationship. To gain further insight into the energy-converting mechanisms and interactions with an increasing variety of dynein cargos and regulators, rapid expression and purification of a variety of dynein proteins and fragments are important. Here we describe transient expression of cytoplasmic dynein in HEK293 cells and fast small-scale purification for high-throughput protein engineering. Mammalian cell expression might be generally considered to be a laborious process, but with recent technology and some simple inexpensive custom-built labware, dynein expression and purification from mammalian cells can be fast and easy.

The Dictyostelium Centrosome

The centrosome of Dictyostelium amoebae contains no centrioles and consists of a cylindrical layered core structure surrounded by a corona harboring microtubule-nucleating γ-tubulin complexes. It is the major centrosomal model beyond animals and yeasts. Proteomics, protein interaction studies by BioID and superresolution microscopy methods led to considerable progress in our understanding of the composition, structure and function of this centrosome type. We discuss all currently known components of the Dictyostelium centrosome in comparison to other centrosomes of animals and yeasts.

Genetic Neuropathy Due to Impairments in Mitochondrial Dynamics

Mitochondria are dynamic organelles capable of fusing, dividing, and moving about the cell. These properties are especially important in neurons, which in addition to high energy demand, have unique morphological properties with long axons. Notably, mitochondrial dysfunction causes a variety of neurological disorders including peripheral neuropathy, which is linked to impaired mitochondrial dynamics. Nonetheless, exactly why peripheral neurons are especially sensitive to impaired mitochondrial dynamics remains somewhat enigmatic. Although the prevailing view is that longer peripheral nerves are more sensitive to the loss of mitochondrial motility, this explanation is insufficient. Here, we review pathogenic variants in proteins mediating mitochondrial fusion, fission and transport that cause peripheral neuropathy. In addition to highlighting other dynamic processes that are impacted in peripheral neuropathies, we focus on impaired mitochondrial quality control as a potential unifying theme for why mitochondrial dysfunction and impairments in mitochondrial dynamics in particular cause peripheral neuropathy.

Dictyostelium Cell Fixation: Two Simple Tricks

We share two simple modifications to enhance the fixation and imaging of relatively small, motile, and rounded model cells. These include cell centrifugation and the addition of trace amounts of glutaraldehyde to existing fixation methods. Though they need to be carefully considered in each context, they have been useful to our studies of the spatial relationships of the microtubule cytoskeletal system.

Bioenergetics of the Dictyostelium Kinesin-8 Motor Isoform

The functional organization of microtubules in eukaryotic cells requires a combination of their inherent dynamic properties, interactions with motor machineries, and interactions with accessory proteins to affect growth, shrinkage, stability, and architecture. In most organisms, the Kinesin-8 family of motors play an integral role in these organizations, well known for their mitotic activities in microtubule (MT) length control and kinetochore interactions. In Dictyostelium discoideum, the function of Kinesin-8 remains elusive. We present here some biochemical properties and localization data that indicate that this motor (DdKif10) shares some motility properties with other Kinesin-8s but also illustrates differences in microtubule localization and depolymerase action that highlight functional diversity.

13 Plus 1: A 30-Year Perspective on Microtubule-Based Motility in Dictyostelium

Individual gene analyses of microtubule-based motor proteins in Dictyostelium discoideum have provided a rough draft of its machinery for cytoplasmic organization and division. This review collates their activities and looks forward to what is next. A comprehensive approach that considers the collective actions of motors, how they balance rates and directions, and how they integrate with the actin cytoskeleton will be necessary for a complete understanding of cellular dynamics.

Emerging mechanisms of dynein transport in the cytoplasm versus the cilium

Two classes of dynein power long-distance cargo transport in different cellular contexts. Cytoplasmic dynein-1 is responsible for the majority of transport toward microtubule minus ends in the cell interior. Dynein-2, also known as intraflagellar transport dynein, moves cargoes along the axoneme of eukaryotic cilia and flagella. Both dyneins operate as large ATP-driven motor complexes, whose dysfunction is associated with a group of human disorders. But how similar are their mechanisms of action and regulation? To examine this question, this review focuses on recent advances in dynein-1 and -2 research, and probes to what extent the emerging principles of dynein-1 transport could apply to or differ from those of the less well-understood dynein-2 mechanoenzyme.

Organization of microtubule assemblies in Dictyostelium syncytia depends on the microtubule crosslinker, Ase1

It has long been known that the interphase microtubule (MT) array is a key cellular scaffold that provides structural support and directs organelle trafficking in eukaryotic cells. Although in animal cells, a combination of centrosome nucleating properties and polymer dynamics at the distal microtubule ends is generally sufficient to establish a radial, polar array of MTs, little is known about how effector proteins (motors and crosslinkers) are coordinated to produce the diversity of interphase MT array morphologies found in nature. This diversity is particularly important in multinucleated environments where multiple MT arrays must coexist and function. We initiate here a study to address the higher ordered coordination of multiple, independent MT arrays in a common cytoplasm. Deletion of a MT crosslinker of the MAP65/Ase1/PRC1 family disrupts the spatial integrity of multiple arrays in Dictyostelium discoideum, reducing the distance between centrosomes and increasing the intermingling of MTs with opposite polarity. This result, coupled with previous dynein disruptions suggest a robust mechanism by which interphase MT arrays can utilize motors and crosslinkers to sense their position and minimize overlap in a common cytoplasm.

Mechanism and regulation of cytoplasmic dynein

Until recently, dynein was the least understood of the cytoskeletal motors. However, a wealth of new structural, mechanistic, and cell biological data is shedding light on how this complicated minus-end-directed, microtubule-based motor works. Cytoplasmic dynein-1 performs a wide array of functions in most eukaryotes, both in interphase, in which it transports organelles, proteins, mRNAs, and viruses, and in mitosis and meiosis. Mutations in dynein or its regulators are linked to neurodevelopmental and neurodegenerative diseases. Here, we begin by providing a synthesis of recent data to describe the current model of dynein's mechanochemical cycle. Next, we discuss regulators of dynein, with particular focus on those that directly interact with the motor to modulate its recruitment to microtubules, initiate cargo transport, or activate minus-end-directed motility.

Nucleocytoplasmic protein translocation during mitosis in the social amoebozoan Dictyostelium discoideum

Mitosis is a fundamental and essential life process. It underlies the duplication and survival of all cells and, as a result, all eukaryotic organisms. Since uncontrolled mitosis is a dreaded component of many cancers, a full understanding of the process is critical. Evolution has led to the existence of three types of mitosis: closed, open, and semi-open. The significance of these different mitotic species, how they can lead to a full understanding of the critical events that underlie the asexual duplication of all cells, and how they may generate new insights into controlling unregulated cell division remains to be determined. The eukaryotic microbe Dictyostelium discoideum has proved to be a valuable biomedical model organism. While it appears to utilize closed mitosis, a review of the literature suggests that it possesses a form of mitosis that lies in the middle between truly open and fully closed mitosis-it utilizes a form of semi-open mitosis. Here, the nucleocytoplasmic translocation patterns of the proteins that have been studied during mitosis in the social amoebozoan D. discoideum are detailed followed by a discussion of how some of them provide support for the hypothesis of semi-open mitosis.

Functions and mechanics of dynein motor proteins

Fuelled by ATP hydrolysis, dyneins generate force and movement on microtubules in a wealth of biological processes, including ciliary beating, cell division and intracellular transport. The large mass and complexity of dynein motors have made elucidating their mechanisms a sizable task. Yet, through a combination of approaches, including X-ray crystallography, cryo-electron microscopy, single-molecule assays and biochemical experiments, important progress has been made towards understanding how these giant motor proteins work. From these studies, a model for the mechanochemical cycle of dynein is emerging, in which nucleotide-driven flexing motions within the AAA+ ring of dynein alter the affinity of its microtubule-binding stalk and reshape its mechanical element to generate movement.

A kinesin-mediated mechanism that couples centrosomes to nuclei

The M-type kinesin isoform, Kif9, has recently been implicated in maintaining a physical connection between the centrosome and nucleus in Dictyostelium discoideum. However, the mechanism by which Kif9 functions to link these two organelles remains obscure. Here we demonstrate that the Kif9 protein is localized to the nuclear envelope and is concentrated in the region underlying the centrosome point of attachment. Nuclear anchorage appears mediated through a specialized transmembrane domain located in the carboxyl terminus. Kif9 interacts with microtubules in in vitro binding assays and effects an endwise depolymerization of the polymer. These results suggest a model whereby Kif9 is anchored to the nucleus and generates a pulling force that reels the centrosome up against the nucleus. This is a novel activity for a kinesin motor, one important for progression of cells into mitosis and to ensure centrosome-nuclear parity in a multinuclear environment.

The 2.8 Å crystal structure of the dynein motor domain

Dyneins are microtubule-based AAA(+) motor complexes that power ciliary beating, cell division, cell migration and intracellular transport. Here we report the most complete structure obtained so far, to our knowledge, of the 380-kDa motor domain of Dictyostelium discoideum cytoplasmic dynein at 2.8 Å resolution; the data are reliable enough to discuss the structure and mechanism at the level of individual amino acid residues. Features that can be clearly visualized at this resolution include the coordination of ADP in each of four distinct nucleotide-binding sites in the ring-shaped AAA(+) ATPase unit, a newly identified interaction interface between the ring and mechanical linker, and junctional structures between the ring and microtubule-binding stalk, all of which should be critical for the mechanism of dynein motility. We also identify a long-range allosteric communication pathway between the primary ATPase and the microtubule-binding sites. Our work provides a framework for understanding the mechanism of dynein-based motility.

X-ray structure of a functional full-length dynein motor domain

Dyneins are large microtubule-based motors that power a wide variety of cellular processes. Here we report a 4.5-Å X-ray crystallographic analysis of the entire functional motor domain of cytoplasmic dynein with ADP from Dictyostelium discoideum, which has revealed the detailed architecture of the functional units required for motor activity, including the ATP-hydrolyzing ring, the long coiled-coil microtubule-binding stalk and the force-generating rod-like linker. We discovered a Y-shaped protrusion composed of two long coiled coils-the stalk and the newly identified 'strut'. This structure supports our model in which the strut coiled coil actively contributes to communication between the primary ATPase site in the ring and the microtubule-binding site at the tip of the stalk coiled coil. Our work also provides insight into how the two motor domains are arranged and how they interact with each other in a functional dimer form of cytoplasmic dynein.

C-sequence of the Dictyostelium cytoplasmic dynein participates in processivity modulation

We examined the functional roles of C-sequence, a 47-kDa non-AAA+ module at the C-terminal end of the 380-kDa Dictyostelium dynein motor domain. When the distal segment of the C-sequence was deleted from the motor domain, the single-molecule processivity of the dimerized motor domain was selectively impaired without its ensemble motile ability and ATPase activity being severely affected. When the hinge-like sequence between the distal and proximal C-sequence segments was made more or less flexible, the dimeric motor showed lower or higher processivity, respectively. These results suggest a potential function of the distal C-sequence segment as a modulator of processivity.

Dictyostelium discoideum: a model system for ultrastructural analyses of cell motility and development

Dictyostelium occupies an interesting niche in the grand scheme of model organisms. On the one hand, it is a compact, highly motile single cell that presents numerous opportunities to investigate the fundamental mechanisms of signal transduction, cell movement, and pathogen infection. However, upon starvation, individual cells enter a developmental pathway that involves cell aggregation, cell-cell adhesion, pattern formation, and differentiation. Thus, Dictyostelium is also well known as a basic model for studying developmental processes. Electron microscopy (EM) has played a large role in both the unicellular and the multicellular life stages, for example, providing image detail for structure/function relationships of cytoskeletal proteins, the deposition of cellulose fibrils in maturing spores, and the identification of intercellular junctional complexes. Powerful combinations of robust molecular genetic tools, high-resolution light microscopy, and EM methods make this organism an attractive model for imaging dynamic cell processes. This chapter serves to highlight the past and current EM approaches that have advanced our understanding of how cells and proteins function.

Protein engineering approaches to study the dynein mechanism using a Dictyostelium expression system

Dyneins are microtubule-based motor complexes that power a wide variety of motile processes within eukaryotic cells, including the beating of cilia and flagella and intracellular trafficking along microtubules. Mechanistic studies on dynein have been hampered by their enormous size (molecular masses of 0.5-3MDa) and molecular complexity. However, the recent establishment of recombinant expression systems for cytoplasmic dynein, together with structural and functional analyses, has advanced our understanding of the molecular mechanisms of dynein motility. Here, we describe several protocols for protein engineering approaches to the dynein mechanism using a Dictyostelium discoideum expression system. We first describe the design and preparation of recombinant dynein suitable for mechanistic studies. We then discuss two distinct functional assays that take advantage of the recombinant dynein. One is for detection of dynein's conformational changes during the ATPase cycle. Another is an in vitro motility assay at multiple- and single-molecule levels for examination of the dynamic behavior of dynein moving on a microtubule.

Myosin-V regulates oskar mRNA localization in the Drosophila oocyte

Intracellular mRNA localization is an effective mechanism for protein targeting leading to functional polarization of the cell. The mechanisms controlling mRNA localization and specifically how the actin and microtubule (MT) cytoskeletons cooperate in this process are not well understood. In Drosophila, Oskar protein accumulation at the posterior pole of the oocyte is required for embryonic development and is achieved by the transport of oskar mRNA and its exclusive translation at the posterior pole. oskar mRNA localization requires the activity of the MT-based motor Kinesin, as well as the formation of a transport-competent ribonucleoprotein (RNP) complex. Here, we show that didum, encoding the Drosophila actin-based motor Myosin-V, is a new posterior group gene that promotes posterior accumulation of Oskar. Myosin-V associates with the oskar mRNA transport complex preferentially at the oocyte cortex, revealing a short-range actomyosin-based mechanism that mediates the local entrapment of oskar at the posterior pole. Our results also show that Myosin-V interacts with Kinesin heavy chain and counterbalances Kinesin function, preventing ectopic accumulation of oskar in the cytoplasm. Our findings reveal that a balance of microtubule- and actin-based motor activities regulates oskar mRNA localization in the Drosophila oocyte.

Ciliary abnormalities due to defects in the retrograde transport protein DYNC2H1 in short-rib polydactyly syndrome

The short-rib polydactyly (SRP) syndromes are a heterogeneous group of perinatal lethal skeletal disorders with polydactyly and multisystem organ abnormalities. Homozygosity by descent mapping in a consanguineous SRP family identified a genomic region that contained DYNC2H1, a cytoplasmic dynein involved in retrograde transport in the cilium. Affected individuals in the family were homozygous for an exon 12 missense mutation that predicted the amino acid substitution R587C. Compound heterozygosity for one missense and one null mutation was identified in two additional nonconsanguineous SRP families. Cultured chondrocytes from affected individuals showed morphologically abnormal, shortened cilia. In addition, the chondrocytes showed abnormal cytoskeletal microtubule architecture, implicating an altered microtubule network as part of the disease process. These findings establish SRP as a cilia disorder and demonstrate that DYNC2H1 is essential for skeletogenesis and growth.

AAA+ Ring and linker swing mechanism in the dynein motor

Dynein ATPases power diverse microtubule-based motilities. Each dynein motor domain comprises a ring-like head containing six AAA+ modules and N- and C-terminal regions, together with a stalk that binds microtubules. How these subdomains are arranged and generate force remains poorly understood. Here, using electron microscopy and image processing of tagged and truncated Dictyostelium cytoplasmic dynein constructs, we show that the heart of the motor is a hexameric ring of AAA+ modules, with the stalk emerging opposite the primary ATPase site (AAA1). The C-terminal region is not an integral part of the ring but spans between AAA6 and near the stalk base. The N-terminal region includes a lever-like linker whose N terminus swings by ∼17 nm during the ATPase cycle between AAA2 and the stalk base. Together with evidence of stalk tilting, which may communicate changes in microtubule binding affinity, these findings suggest a model for dynein's structure and mechanism.

Motor- and tail-dependent targeting of dynein to microtubule plus ends and the cell cortex

BACKGROUND

Cytoplasmic dynein mediates spindle positioning in budding yeast by powering sliding of microtubules along the cell cortex. Although previous studies have demonstrated cortical and plus-end targeting of dynein heavy chain (Dyn1/HC), the regulation of its recruitment to these sites remains elusive.

RESULTS

Here we show that separate domains of Dyn1/HC confer differential localization to the dynein complex. The N-terminal tail domain targets Dyn1/HC to cortical Num1 receptor sites, whereas the C-terminal motor domain targets Dyn1/HC to microtubule plus ends in a Bik1/CLIP-170- and Pac1/LIS1-dependent manner. Surprisingly, the isolated motor domain blocks plus-end targeting of Dyn1/HC, leading to a dominant-negative effect on dynein function. Overexpression of Pac1/LIS1, but not Bik1/CLIP-170, rescues the dominant negativity by restoring Dyn1/HC to plus ends. In contrast, the isolated tail domain has no inhibitory effect on Dyn1/HC targeting and function. However, cortical targeting of the tail construct is more robust than full-length Dyn1/HC and occurs independently of Bik1/CLIP-170 or Pac1/LIS1.

CONCLUSIONS

Our results suggest that the cortical association domain is normally masked in the full-length dynein molecule. We propose that targeting of dynein to plus ends unmasks the tail, priming the motor for off-loading to cortical Num1 sites.

Kinesin-5 is not essential for mitotic spindle elongation in Dictyostelium

The proper assembly and operation of the mitotic spindle is essential to ensure the accurate segregation of chromosomes and to position the cytokinetic furrow during cell division in eukaryotes. Not only are dynamic microtubules required but also the concerted actions of multiple motor proteins are necessary to effect spindle pole separation, chromosome alignment, chromatid segregation, and spindle elongation. Although a number of motor proteins are known to play a role in mitosis, there remains a limited understanding of their full range of functions and the details by which they interact with other spindle components. The kinesin-5 (BimC/Eg5) family of motors is largely considered essential to drive spindle pole separation during the initial and latter stages of mitosis. We have deleted the gene encoding the kinesin-5 member in Dictyostelium, (kif13), and find that, in sharp contrast with results found in vertebrate, fly, and yeast organisms, kif13(-) cells continue to grow at rates indistinguishable from wild type. Phenotype analysis reveals a slight increase in spindle elongation rates in the absence of Kif13. More importantly, there is a dramatic, premature separation of spindle halves in kif13(-) cells, suggesting a novel role of this motor in maintaining spindle integrity at the terminal stages of division.

Disruption of four kinesin genes in dictyostelium

BACKGROUND

Kinesin and dynein are the two families of microtubule-based motors that drive much of the intracellular movements in eukaryotic cells. Using a gene knockout strategy, we address here the individual function(s) of four of the 13 kinesin proteins in Dictyostelium. The goal of our ongoing project is to establish a minimal motility proteome for this basal eukaryote, enabling us to contrast motor functions here with the often far more elaborate motor families in the metazoans.

RESULTS

We performed individual disruptions of the kinesin genes, kif4, kif8, kif10, and kif11. None of the motors encoded by these genes are essential for development or viability of Dictyostelium. Removal of Kif4 (kinesin-7; CENP-E family) significantly impairs the rate of cell growth and, when combined with a previously characterized dynein inhibition, results in dramatic defects in mitotic spindle assembly. Kif8 (kinesin-4; chromokinesin family) and Kif10 (kinesin-8; Kip3 family) appear to cooperate with dynein to organize the interphase radial microtubule array.

CONCLUSION

The results reported here extend the number of kinesin gene disruptions in Dictyostelium, to now total 10, among the 13 isoforms. None of these motors, individually, are required for short-term viability. In contrast, homologs of at least six of the 10 kinesins are considered essential in humans. Our work underscores the functional redundancy of motor isoforms in basal organisms while highlighting motor specificity in more complex metazoans. Since motor disruption in Dictyostelium can readily be combined with other motility insults and stresses, this organism offers an excellent system to investigate functional interactions among the kinesin motor family.

Molecular mechanism of force generation by dynein, a molecular motor belonging to the AAA+ family

Dynein is an AAA+ (ATPase associated with various cellular activities)-type motor complex that utilizes ATP hydrolysis to actively drive microtubule sliding. The dynein heavy chain (molecular mass >500 kDa) contains six tandemly linked AAA+ modules and exhibits full motor activities. Detailed molecular dissection of this motor with unique architecture was hampered by the lack of an expression system for the recombinant heavy chain, as a result of its large size. However, the recent success of recombinant protein expression with full motor activities has provided a method for advances in structure-function studies in order to elucidate the molecular mechanism of force generation.

Cytoplasmic dynein is involved in the retention of microtubules at the centrosome in interphase cells

Cytoplasmic dynein is known to be involved in the establishment of radial microtubule (MT) arrays. During mitosis, dynein activity is required for tethering of the MTs at the spindle poles. In interphase cells, dynein inhibitors induce loss of radial MT organization; however, the exact role of dynein in the maintenance of MT arrays is unclear. Here, we examined the effect of dynein inhibitors on MT distribution and the centrosome protein composition in cultured fibroblasts. We found that while these inhibitors induced rapid (t(1/2) approximately 20 min) loss of radial MT organization, the levels of key centrosomal proteins or the rates of MT nucleation did not change significantly in dynein-inhibited cells, suggesting that the loss of dynein activity does not affect the structural integrity of the centrosome or its capacity to nucleate MTs. Live observations of the centrosomal activity showed that dynein inhibition enhanced the detachment of MTs from the centrosome. We conclude that the primary role of dynein in the maintenance of a radial MT array in interphase cells consists of retention of MTs at the centrosome and hypothesize that dynein has a role in the MT retention, separate from the delivery to the centrosome of MT-anchoring proteins.

The coordination of cyclic microtubule association/dissociation and tail swing of cytoplasmic dynein

The dynein motor domain is composed of a tail, head, and stalk and is thought to generate a force to microtubules by swinging the tail against the head during its ATPase cycle. For this "power stroke," dynein has to coordinate the tail swing with microtubule association/dissociation at the tip of the stalk. Although a detailed picture of the former process is emerging, the latter process remains to be elucidated. By using the single-headed recombinant motor domain of Dictyostelium cytoplasmic dynein, we address the questions of how the interaction of the motor domain with a microtubule is modulated by ATPase steps, how the two mechanical cycles (the microtubule association/dissociation and tail swing) are coordinated, and which ATPase site among the multiple sites in the motor domain regulates the coordination. Based on steady-state and pre-steady-state measurements, we demonstrate that the two mechanical cycles proceed synchronously at most of the intermediate states in the ATPase cycle: the motor domain in the poststroke state binds strongly to the microtubule with a K(d) of approximately 0.2 microM, whereas most of the motor domains in the prestroke state bind weakly to the microtubule with a K(d) of >10 microM. However, our results suggest that the timings of the microtubule affinity change and tail swing are staggered at the recovery stroke step in which the tail swings from the poststroke to the prestroke position. The ATPase site in the AAA1 module of the motor domain was found to be responsible for the coordination of these two mechanical processes.

Two modes of microtubule sliding driven by cytoplasmic dynein

Dynein is a huge multisubunit microtubule (MT)-based motor, whose motor domain resides in the heavy chain. The heavy chain comprises a ring of six AAA (ATPases associated with diverse cellular activities) modules with two slender protruding domains, the tail and stalk. It has been proposed that during the ATP hydrolysis cycle, this tail domain swings against the AAA ring as a lever arm to generate the power stroke. However, there is currently no direct evidence to support the model that the tail swing is tightly linked to dynein motility. To address the question of whether the power stroke of the tail drives MT sliding, we devised an in vitro motility assay using genetically biotinylated cytoplasmic dyneins anchored on a glass surface in the desired orientation with a biotin-streptavidin linkage. Assays on the dyneins with the site-directed biotin tag at eight different locations provided evidence that robust MT sliding is driven by the power stroke of the tail. Furthermore, the assays revealed slow MT sliding independent of dynein orientation on the glass surface, which is mechanically distinct from the sliding driven by the power stroke of the tail.

Single-molecule analysis of dynein processivity and stepping behavior

Cytoplasmic dynein, the 1.2 MDa motor driving minus-end-directed motility, has been reported to move processively along microtubules, but its mechanism of motility remains poorly understood. Here, using S. cerevisiae to produce recombinant dynein with a chemically controlled dimerization switch, we show by structural and single-molecule analysis that processivity requires two dynein motor domains but not dynein's tail domain or any associated subunits. Dynein advances most frequently in 8 nm steps, although longer as well as side and backward steps are observed. Individual motor domains show a different stepping pattern, which is best explained by the two motor domains shuffling in an alternating manner between rear and forward positions. Our results suggest that cytoplasmic dynein moves processively through the coordination of its two motor domains, but its variable step size and direction suggest a considerable diffusional component to its step, which differs from Kinesin-1 and is more akin to myosin VI.

A flexible linkage between the dynein motor and its cargo

We have used an antibody-Fab tag to mark the position of the cytoplasmic dynein amino-terminal tail domain, as it emerges from the main mass of the motor. Electron microscopy and single-particle image analysis reveal that the tag does not assume a rigidly fixed position, but instead can be found at various locations around the planar ring that comprises the motor's backbone. The work suggests that the tail is attached to the motor at a point near the ring center, and that the sequence immediately adjacent to this connection is flexible. Such flexibility argues against a simple-lever arm model for dynein force production.

The affinity of the dynein microtubule-binding domain is modulated by the conformation of its coiled-coil stalk

The microtubule-binding domain (MTBD) of dynein is separated from the AAA (ATPase with any other activity) core of the motor by an approximately 15-nm stalk that is predicted to consist of an antiparallel coiled coil. However, the structure of this coiled coil and the mechanism it uses to mediate communication between the MTBD and ATP-binding core are unknown. Here, we sought to identify the optimal alignment between the hydrophobic heptad repeats in the two strands of the stalk coiled coil. To do this, we fused the MTBD of mouse cytoplasmic dynein, together with 12-36 residues of its stalk, onto a stable coiled-coil base provided by Thermus thermophilus seryl-tRNA synthetase and tested these chimeric constructs for microtubule binding in vitro. The results identified one alignment that yielded a protein displaying high affinity for microtubules (2.2 microM). The effects of mutations applied to the MTBD of this construct paralleled those previously reported (Koonce, M. P., and Tikhonenko, I. (2000) Mol. Biol. Cell 11, 523-529) for an intact dynein motor unit in the absence of ATP, suggesting that it resembles the tight binding state of native intact dynein. All other alignments showed at least 10-fold lower affinity for microtubules with the exception of one, which had an intermediate affinity. Based on these results and on amino acid sequence analysis, we hypothesize that dynein utilizes small amounts of sliding displacement between the two strands of its coiled-coil stalk as a means of communication between the AAA core of the motor and the MTBD during the mechanochemical cycle.

Is the dynein motor a winch?

Dyneins are the largest and most complex of the three classes of linear motor proteins in eukaryotic cells. The mass of the dynein motor domain is about ten times that of the other microtubule motor, kinesin. Dynein's homology with the AAA+ superfamily of mechanoenzymes distinguishes it from both kinesin and myosin, which share a common fold and ancestry as members of the G-protein superfamily. In contrast to the other motor proteins, little is known about the mechanism of dynein; its three-dimensional structure is unknown even at low resolution. Recent two-dimensional images from electron microscopy have revealed new details of its structure and how this changes to produce movement. These and the recently solved crystal structure of another AAA+ protein, ClpB, offer tantalising hints about dynein's mechanism, suggesting it may act like a molecular winch.

ATP hydrolysis cycle-dependent tail motions in cytoplasmic dynein

The motor protein dynein is predicted to move the tail domain, a slender rod-like structure, relative to the catalytic head domain to carry out its power stroke. Here, we investigated ATP hydrolysis cycle-dependent conformational dynamics of dynein using fluorescence resonance energy transfer analysis of the dynein motor domain labeled with two fluorescent proteins. We show that dynein adopts at least two conformational states (states I and II), and the tail undergoes ATP-induced motions relative to the head domain during transitions between the two states. Our measurements also suggest that in the course of the ATP hydrolysis cycle of dynein, the tail motion from state I to state II takes place in the ATP-bound state, whereas the motion from state II to state I occurs in the ADP-bound state. The latter tail motion may correspond to the predicted power stroke of dynein.

Pushing forces drive the comet-like motility of microtubule arrays in Dictyostelium

Overexpression of dynein fragments in Dictyostelium induces the movement of the entire interphase microtubule array. Centrosomes in these cells circulate through the cytoplasm at rates between 0.4 and 2.5 microm/s and are trailed by a comet-tail like arrangement of the microtubule array. Previous work suggested that these cells use a dynein-mediated pulling mechanism to generate this dramatic movement and that similar forces are at work to maintain the interphase MTOC position in wild-type cells. In the present study, we address the nature of the forces used to produce microtubule movement. We have used a laser microbeam to sever the connection between the motile centrosomes and trailing microtubules, demonstrating that the major force for such motility results from a pushing on the microtubules. We eliminate the possibility that microtubule assembly/disassembly reactions are significant contributors to this motility and suggest that the cell cortex figures prominently in locating force-producing molecules. Our findings indicate that interphase microtubules in Dictyostelium are subject to both dynein- and kinesin-like forces and that these act in concert to maintain centrosome position in the cell and to support the radial character of the microtubule network.

Dictyostelium LIS1 is a centrosomal protein required for microtubule/cell cortex interactions, nucleus/centrosome linkage, and actin dynamics

The widespread LIS1-proteins were originally identified as the target for sporadic mutations causing lissencephaly in humans. Dictyostelium LIS1 (DdLIS1) is a microtubule-associated protein exhibiting 53% identity to human LIS1. It colocalizes with dynein at isolated, microtubule-free centrosomes, suggesting that both are integral centrosomal components. Replacement of the DdLIS1 gene by the hypomorphic D327H allele or overexpression of an MBP-DdLIS1 fusion disrupted various dynein-associated functions. Microtubules lost contact with the cell cortex and were dragged behind an unusually motile centrosome. Previously, this phenotype was observed in cells overexpressing fragments of dynein or the XMAP215-homologue DdCP224. DdLIS1 was coprecipitated with DdCP224, suggesting that both act together in dynein-mediated cortical attachment of microtubules. Furthermore, DdLIS1-D327H mutants showed Golgi dispersal and reduced centrosome/nucleus association. Defects in DdLIS1 function also altered actin dynamics characterized by traveling waves of actin polymerization correlated with a reduced F-actin content. DdLIS1 could be involved in actin dynamics through Rho-GTPases, because DdLIS1 interacted directly with Rac1A in vitro. Our results show that DdLIS1 is required for maintenance of the microtubule cytoskeleton, Golgi apparatus and nucleus/centrosome association, and they suggest that LIS1-dependent alterations of actin dynamics could also contribute to defects in neuronal migration in lissencephaly patients.

25Å Resolution Structure of a Cytoplasmic Dynein Motor Reveals a Seven-member Planar Ring

Dyneins form one of the three major families of cytoskeleton-based motor proteins that together drive most of the visible forms of cell and organelle movement. We present here a 3D reconstruction of a cytoplasmic dynein motor domain obtained by electron microscopy, at 25 Angstrom resolution. This work demonstrates a basic motor architecture of a flat, slightly elliptical ring composed of seven densities arranged around a partially enclosed central cavity. We have used specific Fab tags to localize the microtubule-binding domain; the connecting stalk emerges at one end of the motor's long axis. Through proposed fitting of representative AAA domain structures, we show that the nucleotide catalytic P-1 domain is likely located at the opposite end of the motor. Thus mechanisms that couple nucleotide hydrolysis with microtubule binding must be propagated around a ring structure, in a manner clearly distinct from kinesin or myosin-mediated movements. Analysis of the Fab tagged datasets reveals classes of particles with stalks protruding at distinct angles from the motor. There is a approximately 40 degrees variation in microtubule-binding stalk angle that may reflect linkage to dynein's mechanochemical cycle. Overall, the work provides sufficient resolution to begin the mapping of landmark features onto a dynein motor, and provides a foundation for understanding the mechanics of dynein movement.

The XMAP215-family protein DdCP224 is required for cortical interactions of microtubules

Background

Interactions of peripheral microtubule tips with the cell cortex are of crucial importance for nuclear migration, spindle orientation, centrosome positioning and directional cell movement. Microtubule plus end binding proteins are thought to mediate interactions of microtubule tips with cortical actin and membrane proteins in a dynein-dependent manner. XMAP215-family proteins are main regulators of microtubule plus end dynamics but so far they have not been implicated in the interactions of microtubule tips with the cell cortex.

Results

Here we show that overexpression of an N-terminal fragment of DdCP224, the Dictyostelium XMAP215 homologue, caused a collapse of the radial microtubule cytoskeleton, whereby microtubules lost contact with the cell cortex and were dragged behind like a comet tail of an unusually motile centrosome. This phenotype was indistinguishable from mutants overexpressing fragments of the dynein heavy chain or intermediate chain. Moreover, it was accompanied by dispersal of the Golgi apparatus and reduced cortical localization of the dynein heavy chain indicating a disrupted dynein/dynactin interaction. The interference of DdCP224 with cortical dynein function is strongly supported by the observations that DdCP224 and its N-terminal fragment colocalize with dynein and coimmunoprecipitate with dynein and dynactin.

Conclusions

Our data show that XMAP215-like proteins are required for the interaction of microtubule plus ends with the cell cortex in interphase cells and strongly suggest that this function is mediated by dynein.

The structure of dynein-c by negative stain electron microscopy

Dynein ATPases contain six concatenated AAA modules within the motor region of their heavy chains. Additional regions of sequence are required to form a functional ATPase, which a previous study suggested forms seven or eight subdomains arranged in either a ring or hollow sphere. A more recent homology model of the six AAA modules suggests that these form a ring. Therefore both the number and arrangement of subdomains remain uncertain. We show two-dimensional projection images of dynein-c in negative stain which reveal new details of its structure. Initial electron cryomicroscopy shows a similar overall morphology. The molecule consists of three domains: stem, head, and stalk. In the absence of nucleotide the head has seven lobes of density forming an asymmetric ring. An eighth lobe protrudes from one side of this heptameric ring and appears to join the elongated cargo-binding stem. The proximal stem is flexible, as is the stalk, suggesting that they act as compliant elements within the motor. A new analysis of pre- and post-power stroke conformations shows the combined effect of their flexibility on the spatial distribution of the microtubule-binding domain and therefore the potential range of power stroke sizes. We present and compare two alternative models of the structure of dynein.

A single-headed recombinant fragment of Dictyostelium cytoplasmic dynein can drive the robust sliding of microtubules

A cytoplasmic dynein is a microtubule-based motor protein involved in diverse cellular functions, such as organelle transport and chromosome segregation. The dynein has two ring-shaped heads that contain six repeats of the AAA domain responsible for ATP hydrolysis. It has been proposed that the ATPase-dependent swing of a stalk and a stem emerging from each of the heads generates the power stroke (Burgess, S.A. (2003) Nature 421, 715-718). To understand the molecular mechanism of the dynein power stroke, it is essential to establish an easy and reproducible method to express and purify the recombinant dynein with full motor activities. Here we report the expression and purification of the C-terminal 380-kDa fragment of the Dictyostelium cytoplasmic dynein heavy-chain fused with an affinity tag and green fluorescent protein. The purified single-headed recombinant protein drove the robust minus-end-directed sliding of microtubules at a velocity of 1.2 microm/s. This recombinant protein had a high basal ATPase activity (approximately 4s(-1)), which was further activated by >15-fold on the addition of 40 microM microtubules. These results show that the 380-kDa recombinant fragment retains all the structures required for motor functions, i.e. the ATPase activity highly stimulated by microtubules and the robust motility.

A Novel Actin-bundling Kinesin-related Protein from Dictyostelium discoideum

Actin filaments and microtubules are two major cytoskeletal systems involved in wide cellular processes, and the organizations of their filamentous networks are regulated by a large number of associated proteins. Recently, evidence has accumulated for the functional cooperation between the two filament systems via associated proteins. However, little is known about the interactions of the kinesin superfamily proteins, a class of microtubule-based motor proteins, with actin filaments. Here, we describe the identification and characterization of a novel kinesin-related protein named DdKin5 from Dictyostelium. DdKin5 consists of an N-terminal conserved motor domain, a central stalk region, and a C-terminal tail domain. The motor domain showed binding to microtubules in an ATP-dependent manner that is characteristic of kinesin-related proteins. We found that the C-terminal tail domain directly interacts with actin filaments and bundles them in vitro. Immunofluorescence studies showed that DdKin5 is specifically enriched at the actin-rich surface protrusions in cells. Overexpression of the DdKin5 protein affected the organization of actin filaments in cells. We propose that a kinesin-related protein, DdKin5, is a novel actin-bundling protein and a potential cross-linker of actin filaments and microtubules associated with specific actin-based structures in Dictyostelium.

Intraflagellar transport (IFT) cargo: IFT transports flagellar precursors to the tip and turnover products to the cell body

Intraflagellar transport (IFT) is the bidirectional movement of multisubunit protein particles along axonemal microtubules and is required for assembly and maintenance of eukaryotic flagella and cilia. One posited role of IFT is to transport flagellar precursors to the flagellar tip for assembly. Here, we examine radial spokes, axonemal subunits consisting of 22 polypeptides, as potential cargo for IFT. Radial spokes were found to be partially assembled in the cell body, before being transported to the flagellar tip by anterograde IFT. Fully assembled radial spokes, detached from axonemal microtubules during flagellar breakdown or turnover, are removed from flagella by retrograde IFT. Interactions between IFT particles, motors, radial spokes, and other axonemal proteins were verified by coimmunoprecipitation of these proteins from the soluble fraction of Chlamydomonas flagella. These studies indicate that one of the main roles of IFT in flagellar assembly and maintenance is to transport axonemal proteins in and out of the flagellum.

Molecular and functional analysis of the dictyostelium centrosome

The centrosome is a nonmembranous, nucleus-associated organelle that functions not only as the main microtubule-organizing center but also as a cell cycle control unit. How the approximately 100 different proteins that make up a centrosome contribute to centrosome function is still largely unknown. Considerable progress in the understanding of centrosomal functions can be expected from comparative cell biology of morphologically different centrosomal structures fulfilling conserved functions. Dictyostelium is an alternative model organism for centrosome research in addition to yeast and animal cells. With the elucidation of morphological changes and dynamics of centrosome duplication, the establishment of a centrosome isolation protocol, and the identification of many centrosomal components, there is a solid basis for understanding the biogenesis and function of this fascinating organelle. Here we give an overview of the prospective protein inventory of the Dictyostelium centrosome based on database searches. Moreover, we focus on the comparative cell biology of known components of the Dictyostelium centrosome including the gamma-tubulin complex and the homologues of centrin, Nek2, XMAP215, and EB1.

Centrosomal microtubule plus end tracking proteins and their role in Dictyostelium cell dynamics

Microtubules interact with huge protein complexes not only with their minus ends but also with their peripheral plus ends. The centrosome at their minus ends nucleates and organizes the microtubule cytoskeleton. The microtubule plus end complex seems to be required for the capture of microtubule tips at cortical sites by mediating interactions of microtubule tips with cortical actin as well as with membrane proteins. This process plays a major role in nuclear migration, spindle orientation and directional cell movement. Five potential members of the microtubule plus end complex have already been identified in Dictyostelium, DdCP224, DdEB1, DdLIS1, the dynein heavy chain and dynein intermediate chain. DdCP224 and DdEB1 are the Dictyostelium representatives of the XMAP215- and EB1-family, respectively. Both are not only concentrated at microtubule tips, they are also centrosomal components. The centrosomal binding domain of DdCP224 resides within the C-terminal fifth of the protein. DdCP224 is involved in the centrosome duplication cycle and cytokinesis. DdEB1 is the first member of the EB1 protein family that is also a genuine centrosomal component. A DdEB1 null mutant revealed that DdEB1 is required for mitotic spindle formation. DdEB1 coprecipitates and colocalizes with DdCP224 suggesting that these proteins act together in their functions. One of these functions could be dynein/dynactin-dependent interaction of microtubule tips with the cell cortex that is thought to determine the positioning of the microtubule-organizing center (MTOC) and the direction of migration.

Dynamic microtubules in Dictyostelium

The term 'microtubule dynamics' is often used to describe assembly/disassembly characteristics of this important cytoskeletal polymer. The ability to image microtubules in live Dictyostelium cells has revealed additional dynamic components, acting on the individual assembled tubules. At least two separate forces are involved, in generation of pronounced bending motions during interphase and in creating tension with the cell cortex. This review attempts to summarize what is known about conventional microtubule dynamics in Dictyostelium as well as to describe these two additional motility components. We propose that these forces are important both in maintaining the overall structure of the microtubule array and in supporting intracellular traffic.

Kinesin motors and microtubule-based organelle transport in Dictyostelium discoideum

Movement of membrane cargoes and chromosomes is driven by kinesin and dynein motors in most eukaryotic cells. In this review, we describe the known kinesin and dynein genes in Dictyostelium. Dictyostelium primarily utilizes two conventional kinesins, an Unc104/KIF1 kinesin, and cytoplasmic dynein to transport membrane organelles within its cytoplasm. We describe how the biological functions of these motors has been dissected through a combination of biochemical to genetic approaches.

Dynein structure and power stroke

Dynein ATPases are microtubule motors that are critical to diverse processes such as vesicle transport and the beating of sperm tails; however, their mechanism of force generation is unknown. Each dynein comprises a head, from which a stalk and a stem emerge. Here we use electron microscopy and image processing to reveal new structural details of dynein c, an isoform from Chlamydomonas reinhardtii flagella, at the start and end of its power stroke. Both stem and stalk are flexible, and the stem connects to the head by means of a linker approximately 10 nm long that we propose lies across the head. With both ADP and vanadate bound, the stem and stalk emerge from the head 10 nm apart. However, without nucleotide they emerge much closer together owing to a change in linker orientation, and the coiled-coil stalk becomes stiffer. The net result is a shortening of the molecule coupled to an approximately 15-nm displacement of the tip of the stalk. These changes indicate a mechanism for the dynein power stroke.