Bioaerosol Sampling: Classical Approaches, Advances, and Perspectives

Bioaerosol sampling is an essential and integral part of any bioaerosol investigation. Since bioaerosols are very diverse in terms of their sizes, species, biological properties, and requirements for their detection and quantification, bioaerosol sampling is an active, yet challenging research area. This paper was inspired by the discussions during the 2018 International Aerosol Conference (IAC) (St. Louis, MO) regarding the need to summarize the current state of the art in bioaerosol research, including bioaerosol sampling, and the need to develop a more standardized set of guidelines for protocols used in bioaerosol research. The manuscript is a combination of literature review and perspectives: it discusses the main bioaerosol sampling techniques and then overviews the latest technical developments in each area; the overview is followed by the discussion of the emerging trends and developments in the field, including personal sampling, application of passive samplers, and advances toward improving bioaerosol detection limits as well as the emerging challenges such as collection of viruses and collection of unbiased samples for bioaerosol sequencing. The paper also discusses some of the practical aspects of bioaerosol sampling with particular focus on sampling aspects that could lead to bioaerosol determination bias. The manuscript concludes by suggesting several goals for bioaerosol sampling and development community to work towards and describes some of the grand bioaerosol challenges discussed at the IAC 2018.

Potential Occupational Exposures and Health Risks Associated with Biomass-Based Power Generation

Biomass is increasingly being used for power generation; however, assessment of potential occupational health and safety (OH&S) concerns related to usage of biomass fuels in combustion-based generation remains limited. We reviewed the available literature on known and potential OH&S issues associated with biomass-based fuel usage for electricity generation at the utility scale. We considered three potential exposure scenarios--pre-combustion exposure to material associated with the fuel, exposure to combustion products, and post-combustion exposure to ash and residues. Testing of dust, fungal and bacterial levels at two power stations was also undertaken. Results indicated that dust concentrations within biomass plants can be extremely variable, with peak levels in some areas exceeding occupational exposure limits for wood dust and general inhalable dust. Fungal spore types, identified as common environmental species, were higher than in outdoor air. Our review suggests that pre-combustion risks, including bioaerosols and biogenic organics, should be considered further. Combustion and post-combustion risks appear similar to current fossil-based combustion. In light of limited available information, additional studies at power plants utilizing a variety of technologies and biomass fuels are recommended.

Monitoring of occupational and environmental aeroallergens-- EAACI Position Paper. Concerted action of the EAACI IG Occupational Allergy and Aerobiology & Air Pollution

Exposure to high molecular weight sensitizers of biological origin is an important risk factor for the development of asthma and rhinitis. Most of the causal allergens have been defined based on their reactivity with IgE antibodies, and in many cases, the molecular structure and function of the allergens have been established. Significant information on allergen levels that cause sensitization and allergic symptoms for several major environmental and occupational allergens has been reported. Monitoring of high molecular weight allergens and allergen carrier particles is an important part of the management of allergic respiratory diseases and requires standardized allergen assessment methods for occupational and environmental (indoor and outdoor) allergen exposure. The aim of this EAACI task force was to review the essential points for monitoring environmental and occupational allergen exposure including sampling strategies and methods, processing of dust samples, allergen analysis, and quantification. The paper includes a summary of different methods for sampling and allergen quantification, as well as their pros and cons for various exposure settings. Recommendations are being made for different exposure scenarios.

Measurement of endotoxins in bioaerosols at workplace: a critical review of literature and a standardization issue

Endotoxins are lipopolysaccharides found in the outer membrane of most Gram-negative bacteria and cyanobacteria. Worker exposure to endotoxins has been shown in a number of work situations and is associated with both respiratory and systemic pathologies. The lack of an occupational exposure limit is mainly due to the absence of a standard protocol at the international level for sampling and analyzing airborne endotoxins. The bibliographic review in this article takes an exhaustive look at the current knowledge on measuring airborne endotoxins. It shows that, despite several reference documents at the international level, the methods used to measure endotoxin exposure differ considerably from one laboratory to another. Standardization is necessary to reduce interlaboratory variability and, ultimately, to improve the use of interstudy data. The bibliographic review presents the current status of standardization for airborne endotoxin measurement methods in the workplace and summarizes areas for further research. This article is both a reference document for all operators wishing to use such methods and a working document to build international consensus around the measurement of airborne endotoxins.

Physical-chemical and microbiological characterization, and mutagenic activity of airborne PM sampled in a biomass-fueled electrical production facility

Biomass combustion is used in heating and electric power generation in many areas of the world. Airborne particulate matter (PM) is released when biomass is brought to a facility, stored, and combusted. Occupational exposure to airborne PM within biomass-fueled facilities may lead to health problems. In March and August of 2006, airborne PM was collected from a biomass-fueled facility located in Denmark. In addition, source-specific PM was generated from straw and wood pellets using a rotating drum. The PM was analyzed for polycyclic aromatic hydrocarbons (PAHs), metals, microbial components, mutagenic activity, and ability to generate highly reactive oxygen species (hROS) in cell-free aqueous suspensions. PM collected from the boiler room and the biomass storage hall had higher levels of mutagenic activity, PAHs and metals, and a higher hROS generating potential than the source specific PM. The mutagenic activity was generally more potent without S9 activation, and on the metabolically enhanced strain YG1041, relative to TA98. Significant correlations were found between mutagenicity on YG1041 (without S9) and PAH concentration and mutagenicity on YG1041 (with S9) and hROS generating ability. PM collected in March was more toxic than PM collected in August. Overall, airborne PM collected from the facility, especially that from the boiler room, were more toxic than PM generated from straw and wood chips. The results suggest that exposure to combustion PM in a biomass-fueled facility, which likely includes PM from biomass combustion as well as internal combustion vehicles, may contribute to an elevated risk of adverse health effects.

Meteo-climatic conditions influence the contribution of endotoxins to PM10 in an urban polluted environment

A decrease in inhalable particulate matter (PM10) pollution is a top priority in urban areas of northern Italy. The sources of PM10 are both anthropogenic and natural. The former have been broadly investigated while the latter are less well known. Endotoxins are natural compounds of PM10 and are potentially toxic. Endotoxins are part of the outer membrane of Gram-negative bacteria. Their health effects are linked to environmental exposure. The effects mainly consist of respiratory symptoms, including pulmonary function decline. The occurrence of endotoxins has been proven in several occupational environments where organic materials supply an optimal substrate for bacteria growth. Knowledge about the presence of these contaminants in the environment is limited. The aim of this work is to evaluate the endotoxin levels of PM10 in the urban air of Turin, and to investigate the influence of seasonal and meteo-climatic factors. The sampling was conducted from January to December 2007. Endotoxin determination was performed by an LAL assay after extraction optimization. The PM10 levels ranged from 11.90 to 104.74 microg/m(3) (48.28 +/- 23.09) while the endotoxin levels ranged between 0.09 and 0.94 EU/m(3) (0.42 +/- 0.23). The seasonal trends of PM10 and endotoxin are inversely proportional. There is a statistically significant correlation between endotoxin and temperature (r = 0.532 p < 0.01), as well as between endotoxin and relative humidity (r = -0.457 p < 0.01). However, temperature has a predominant role. We observed that urban endotoxin concentrations are narrow in range and that the contribution of endotoxins to the total PM10 is only two millionths.

Exposure to dust and endotoxin of employees in cucumber and tomato nurseries

Exposure to bioaerosols in occupational settings is associated with a range of adverse health effects. The aim of this study was to investigate the exposure levels to dust and endotoxin of people working in two cucumber nurseries and two tomato nurseries. Exposure was measured for greenhouse workers (n = 70) mainly working on harvesting cucumbers and tomatoes and clearing the plants after the harvest season. The people were exposed to between 0.2 and 15 mg inhalable dust m(-3) (median = 1.6 mg m(-3)) and between 0.5 and 400 ng inhalable endotoxin m(-3) (median = 32 ng m(-3)). The exposure to 'total dust' and endotoxin measured by stationary samplers (n = 30) in the greenhouses was low. Endotoxin was present in relatively high concentrations on cucumber leaves compared with leaves on pot plants. The Danish occupational exposure limit (OEL) for total organic dust is 3 mg m(-3) and 36% and 17% of the cucumber and tomato workers, respectively, were exposed to >3.0 mg inhalable dust m(-3). There is no OEL for endotoxin, but 'no effect levels' at approximately 15 ng m(-3) have been found. The majority of subjects (65%) were exposed to >15 ng m(-3). Significantly higher exposure was found for employees in cucumber nurseries than for employees in tomato nurseries. Clearing tomato plants after the harvest season caused a higher exposure to endotoxin than tomato harvesting. In conclusion, people working in cucumber and tomato nurseries were often exposed to high levels of inhalable dust and endotoxin. Cucumber harvest workers were exposed to significantly more dust and endotoxin than tomato harvest workers. The dust and endotoxin aerosolized during the working processes were only transported to other areas in the greenhouses to a very low degree. Cucumber and tomato leaves were identified as endotoxin reservoirs.