Assessment of workers' exposure to bioaerosols in a French cheese factory

Occurrence and Identification of Yeasts in Production of White-Brined Cheese

The aim of this study was to reveal the sites of yeast contamination in dairy production and perform taxonomic characterization of potential yeast spoilers in cheese making. Occurrence of spoilage yeasts was followed throughout the manufacture of white-brined cheese at a Danish dairy, including the areas of milk pasteurization, curd processing, and packaging (26 sites in total). Spoilage yeasts were isolated from whey, old cheese curd, and air samples in viable counts of 1.48–6.27 log CFU/mL, 5.44 log CFU/g, and 1.02 log CFU/m3, respectively. Yeast isolates were genotypically classified using (GTG)5-PCR fingerprinting and identified by sequencing of the D1/D2 region of the 26S rRNA gene. The largest yeast heterogeneity was found in old curd collected under the turning machine of molds, where 11 different yeast species were identified. The most frequently isolated yeast species were Candida intermedia, Kluyveromyces marxianus, and Pichia kudriavzevii. The less abundant yeast species included Candida auris, Candida parapsilosis, Candida pseudoglaebosa, Candida sojae, Cutaneotrichosporon curvatus, Cutaneotrichosporon moniliiforme, Papiliotrema flavescens, Rhodotorula mucilaginosa, Vanrija humicola, and Wickerhamiella sorbophila. The awareness on occurrence and taxonomy of spoilage yeasts in cheese production will contribute to a knowledge-based control of contaminating yeasts and quality management of cheese at the dairies.

Assessment of airborne endotoxin in sandstorm dust and indoor environments using a novel passive sampling device in Al Zulfi city, Saudi Arabia - Establishing threshold exposure levels

The impact of sandstorm dust events affects local air quality and public health. These issues are becoming of greater concern in Saudi Arabia. There is a significant lack of research on airborne endotoxin exposure and analysis in the Middle East countries and no coherent body of research exists focusing on sandstorm dust in worldwide. In this study, we used a novel design of an aluminum foil plate (AFP) electrostatic dust cloth (EDC) for the passive air sampling of sandstorm dust. A total of 38 sandstorm dust samples were collected during sandstorm episodes occurring between January and April 2020 in both indoor (7 days, n = 20) and outdoor environments (24 h, n = 18). After exposure, and following an extraction procedure, bacterial endotoxin levels were measured using the Limulus Amoebocyte Lysate (LAL) gel clot method. The study highlights that the airborne endotoxin level observed was between 10 and 200 EU/m² in both indoor and outdoor environments, during a sandstorm event. Agricultural activities and farmhouses observed higher airborne endotoxin levels. In general, increased endotoxin levels were related to the severity of the sandstorms. Given that the observed values were high as per existing guidelines for respiratory health, we recommend the setting an occupational airborne exposure limit for bacterial endotoxin. This is the first report and further studies across various sandstorm-hit regions will need to be undertaken, together with various sampling methods, in order to assess for seasonal and geographic trends.

Prevalence of Bovine Leukemia Virus (BLV) and Bovine Adenovirus (BAdV) genomes among air and surface samples in dairy production

We aimed to assess the occurrence of bovine viruses (bovine leukemia virus-BLV and bovine adenovirus-BAdV) at workplaces in traditional dairies and to evaluate the potential role of airborne and surface contamination in spreading of these viruses derived from raw milk. The total amount of 122 samples-including 37 air (bioaerosol), 40 surface, and 45 milk samples-were checked for the presence of BLV and BAdV genomes using RT-qPCR/qPCR method. The study showed that the viruses were present in 7 air (among them 71.4% were BLV-positive and 28.6% were BAdV-positive), 14 surface (among them 85.7% were BLV-positive and 14.3% were BAdV-positive), and 34 milk (all were BLV-positive only) samples. Statistical analysis revealed that both the air and surfaces in studied occupational environment were more frequently contaminated with BLV than with BAdV (Chi-square test: p = 0.002, Fisher's Exact test: p = 0.002). Kruskal-Wallis tests showed significant differences in BLV genome concentrations in the air (p = 0.045) as well as in BLV and BAdV genome concentrations on surfaces (p = 0.005 and p = 0.040, respectively) between studied processing areas. In units of genome copies (gc) per area, the highest concentrations of BLV and BAdV genomes in the air (9.8 × 10¹ ± 1.14 × 10² gc/m³ and 5.4 × 10¹ ± 9.1 × 10¹ gc/m³, respectively) and on surfaces (9.83 × 10² ± 7.41 × 10² gc/100cm² and 2.30 × 10² ± 3.8 × 10² gc/100cm², respectively) were observed in milk reception area. The air and surfaces of pre-production zones were also significantly more contaminated with BAdV genomes compared to production areas (Mann-Whitney test: p = 0.039 and p = 0.029, respectively). This study showed that dairy workers may be exposed to bovine viruses through the inhalation of bioaerosols and contact with contaminated surfaces. To reduce the probability of virus transmission from the raw milk to humans, efficient surface cleaning procedures degrading viral particles should be introduced and the use of personal protection equipment, especially within pre-production zones, should be required. As the raw milk may be a source of bovine viruses, the development of strategies for both the control and eradication of BLV and BAdV among cattle seems to be also urgently needed.

Comparison of the performance of ITS1 and ITS2 as barcodes in amplicon-based sequencing of bioaerosols

This paper presents the performance of two eukaryotic genomic ribosomal regions, ITS1 and ITS2, in describing fungal diversity in aerosol samples using amplicon-based High-Throughput Sequencing (HTS). Composting sites, biomethanization facilities, and dairy farms, all affected by the presence of fungi, were visited to collect air samples. The amplicon-based HTS approach is a target enrichment method that relies on the amplification of a specific target using particular primers before sequencing. Thus, the results are highly dependent on the quality of amplification. For this reason, the authors of this paper used a shotgun metagenomic approach to compare its outcome with the amplicon-based method. Indeed, shotgun metagenomic does not rely on any amplification prior to sequencing, because all genes are sequenced without a specific target. In addition, culture methods were added to the analyses in biomethanization and dairy farms samples to validate their contribution to fungal diversity of aerosols. The results obtained are unequivocal towards ITS1 outperformance to ITS2 in terms of richness, and taxonomic coverage. The differential abundance analysis did demonstrate that some taxa were exclusively detected only by ITS2, and vice-versa for ITS1. However, the shotgun metagenomic approach showed a taxonomic profile more resembling to ITS1 than ITS2. Based on these results, neither of the barcodes evaluated is perfect in terms of distinguishing all species. Using both barcodes offers a broader view of the fungal aerosol population. However, with the actual knowledge, the authors strongly recommend using ITS1 as a universal fungal barcode for quick general analyses of diversity and when limited financial resources are available, primarily due its ability to capture taxonomic profiles similar to those obtained using the shotgun metagenomic. The culture comparison with amplicon-based sequencing showed the complementarity of both approaches in describing the most abundant taxa.

Evaluation of Bioaerosol Bacterial Components of a Wastewater Treatment Plant Through an Integrate Approach and In Vivo Assessment

Wastewater carries different pathogenic and non-pathogenic microorganisms that can be dispersed in the surrounding environment. Workers who frequent sewage treatment plants can therefore be exposed to aerosols that contain a high concentration of potentially dangerous biological agents, or they can come into direct contact with contaminated material. This can lead to allergies, infections and occupational health-associated diseases. A characterization of biological risk assessment of bioaerosol exposure is necessary. The aim of this study was to evaluate the application of an interdisciplinary method that combines chemical and biological approaches for the analysis of a bioaerosol derived from a wastewater treatment plant (WWTP) situated in Italy. Sampled filters were analyzed by HPLC-MS/MS spectroscopy that searched for different chemical biomarkers of airborne microorganisms. The analytical quantification was compared to the biological cultural method that revealed an underrated microbial concentration. Furthermore, next generation sequencing analysis was used also to identify the uncultivable species that were not detected by the culture dependent-method. Moreover, the simple animal model Caenorhabditis elegans was used to evaluate the pathogenicity of two isolates—Acinetobacter iwoffii and Micrococcus luteus—that showed multidrug-resistance. This work represents a starting point for the development of a multidisciplinary approach for the validation of bioaerosol exposure on WWTP workplaces.

Survival of Microorganisms on Filtering Respiratory Protective Devices Used at Agricultural Facilities

Bioaerosol is a threat at workplaces, therefore the selection and safe use of filtering facepiece respirators (FFRs) is important in preventive activities. The aim of the study was to assess the survival of microorganisms on materials used for FFRs construction. The parameters for microorganism growth under model conditions were described using the Gompertz equation, model verification was also carried out using FFRs at the farmers' workplaces. We found that the factors determining a high survival of microorganisms were as follows: moisture corresponding to the conditions of use and storage of FFRs at workplaces, the presence of sweat and organic dust; inorganic dust and addition of biocide in nonwovens limited the growth of microorganisms, resulting in a shortening of the stationary growth phase and decreased cell numbers (5-6 log). Dust concentration at workplaces was higher than EU occupational exposure limit values and WHO recommendations for airborne particulate matter. Microbial contaminations of the air (103-104 CFU/m3), settled dust (104-106 CFU/g) and FFRs (105 CFU/4cm2) during the grain harvest were high, the main contamination being bacteria (actinomycetes, Pseudomonas fluorescens) and xerophilic fungi. A high correlation was found between the number of microorganisms and the weight of dust on FFRs (R2 = 0.93-0.96).

Fungal Fragments and Fungal Aerosol Composition in Sawmills

Assessment of exposure to fungi has commonly been limited to fungal spore measurements that have shown associations between fungi and development or exacerbation of different airway diseases. Because large numbers of submicronic fragments can be aerosolized from fungal cultures under laboratory conditions, it has been suggested that fungal exposure is more complex and higher than that commonly revealed by spore measurements. However, the assessment of fungal fragments in complex environmental matrix remain limited due to methodological challenges. With a recently developed immunolabeling method for field emission scanning electron microscope (FESEM), we could assess the complex composition of fungal aerosols present in personal thoracic samples collected from two Norwegian sawmills. We found that large fungal fragments (length >1 µm) dominated the fungal aerosols indicating that the traditional monitoring approach of spores severely underestimate fungal exposure. The composition of fungal aerosols comprised in average 9% submicronic fragments, 62% large fragments, and 29% spores. The average concentrations of large and submicronic fragments (0.2–1 µm) were 3 × 10⁵ and 0.6 × 10⁵ particles m⁻³, respectively, and correlated weakly with spores (1.4 × 10⁵ particles m⁻³). The levels of fragments were 2.6 times higher than the average spore concentration that was close to the proposed hazardous level of 10⁵ spores per m³. The season influenced significantly the fungal aerosol concentrations but not the composition. Furthermore, the ratio of spores in the heterogeneous fungal aerosol composition was significantly higher in saw departments as compared to sorting of green timber departments where the fungal fragments were most prevalent. Being the dominating particles of fungal aerosols in sawmills, fungal fragments should be included in exposure-response studies to elucidate their importance for health impairments. Likewise, the use of fungal aerosol composition in such studies should be considered.

Evaluation of the Survivability of Microorganisms Deposited on Filtering Respiratory Protective Devices under Varying Conditions of Humidity

Bioaerosols are common biological factors in work environments, which require routine use of filtering respiratory protective devices (FRPDs). Currently, no studies link humidity changes in the filter materials of such devices, during use, with microorganism survivability. Our aim was to determine the microclimate inside FRPDs, by simulating breathing, and to evaluate microorganism survivability under varying humidity conditions. Breathing was simulated using commercial filtering facepiece respirators in a model system. Polypropylene melt-blown nonwoven fabrics with moisture contents of 40%, 80%, and 200%, were used for assessment of microorganisms survivability. A modified AATCC 100-2004 method was used to measure the survivability of ATCC and NCAIM microorganisms: Escherichia coli, Staphylococcus aureus, Bacillus subtilis, Candida albicans and Aspergillus niger. During simulation relative humidity under the facepiece increased after 7 min of usage to 84%-92% and temperature increased to 29-30 °C. S. aureus survived the best on filter materials with 40%-200% moisture content. A decrease in survivability was observed for E. coli and C. albicans when mass humidity decreased. We found that B. subtilis and A. niger proliferated for 48-72 h of incubation and then died regardless of the moisture content. In conclusion, our tests showed that the survivability of microorganisms on filter materials depends on the amount of accumulated moisture and microorganism type.

Non-culturable bioaerosols in indoor settings: Impact on health and molecular approaches for detection

Despite their significant impact on respiratory health, bioaerosols in indoor settings remain understudied and misunderstood. Culture techniques, predominantly used for bioaerosol characterisation in the past, allow for the recovery of only a small fraction of the real airborne microbial burden in indoor settings, given the inability of several microorganisms to grow on agar plates. However, with the development of new tools to detect non-culturable environmental microorganisms, the study of bioaerosols has advanced significantly. Most importantly, these techniques have revealed a more complex bioaerosol burden that also includes non-culturable microorganisms, such as archaea and viruses. Nevertheless, air quality specialists and consultants remain reluctant to adopt these new research-developed techniques, given that there are relatively few studies found in the literature, making it difficult to find a point of comparison. Furthermore, it is unclear as to how this new non-culturable data can be used to assess the impact of bioaerosol exposure on human health. This article reviews the literature that describes the non-culturable fraction of bioaerosols, focussing on bacteria, archaea and viruses, and examines its impact on bioaerosol-related diseases. It also outlines available molecular tools for the detection and quantification of these microorganisms and states various research needs in this field.