Exposure to thoracic aerosol in a prospective lung function study of cement production workers

Physicochemical characterization of particulate matter in a cement production plant

Employees working in cement production plants are exposed to airborne particulate matter (PM) which may lead to lung function impairments and airway symptoms. The PM consists of raw materials, clinker and additives which vary depending on cement blend. The aim of this work was to characterize the thoracic fraction of PM with regard to size, phase composition and mixing state. Both stationary and personal impactors were used to collect size-fractionated samples in a cement production plant in Norway. Stationary samples were measured with aerosol particle counters and collected with a 13-stage cascade impactor, which were stationed at three locations of the cement production plant: at the raw meal mill, clinker conveyor belt and cement mill. Sioutas cascade impactors, and thoracic and respirable dust samplers were used in parallel for personal sampling. Additionally, particles for electron microscopy were collected with the stationary cascade impactor for size-fractionated single particle characterization. Gravimetric measurements and element compositions of the samples from the stationary impactors show that the PM mass is dominated by calcium-rich particles of size >1 μm. The size distribution results of stationary and personal impactors were similar. Characterization of single particles reveals that limestone is the dominating material in the raw meal mill, whereas clinker and limestone dominate at the clinker conveyor belt and at the cement mill. The element composition of clinker PM did not change with particle size. The PM collected on impactor stages with aerodynamic diameter cut-offs below 0.56 μm was dominated by soot and volatile secondary particles at the three locations. The number of ultrafine particles of the cement related compounds was low. Air concentrations of PM in personal respirable and thoracic samples ranged from 0.14-10 mg m^-3 to 0.37-9.5 mg m^-3, respectively. Considerable local variations exist, both in composition and air concentration of the PM.

Bioaccumulation of Toxic Metals in Children Exposed to Urban Pollution and to Cement Plant Emissions

Cement plants located in urban areas can increase health risk. Although children are particularly vulnerable, biomonitoring studies are lacking. Toenail concentration of 24 metals was measured in 366 children (6-10 years), who live and attend school in a city hosting a cement plant. Living addresses and schools were geocoded and attributed to exposed or control areas, according to modeled ground concentrations of PM₁₀ generated by the cement plant. Air levels of PM₁₀ and NO₂ were monitored. PM₁₀ levels were higher in the exposed, than in the control area. The highest mean PM₁₀ concentration was recorded close to the cement plant. Conversely, the highest NO₂ concentration was in the control area, where vehicular traffic and home heating were the prevalent sources of pollutants. Exposed children had higher concentrations of Nickel (Ni), Cadmium (Cd), Mercury (Hg), and Arsenic (As) than controls. These concentrations correlated each other, indicating a common source. Toenail Barium (Ba) concentration was higher in the control- than in the exposed area. The location of the attended school was a predictor of Cd, Hg, Ni, Ba concentrations, after adjusting for confounders. In conclusion, children living and attending school in an urban area exposed to cement plant emissions show a chronic bioaccumulation of toxic metals, and a significant exposure to PM₁₀ pollution. Cement plants located in populous urban areas seem therefore harmful, and primary prevention policies to protect children health are needed.

Association between exposure in the cement production industry and non-malignant respiratory effects: a systematic review

OBJECTIVES

Based on findings from a systematic literature search, we present and discuss the evidence for an association between exposure to cement dust and non-malignant respiratory effects in cement production workers.

DESIGN AND SETTING

Systematic literature searches (MEDLINE and Embase) were performed. Outcomes were restricted to respiratory symptoms, lung function indices, asthma, chronic bronchitis, chronic obstructive pulmonary disease, pneumoconiosis, induced sputum or fraction of exhaled nitric oxide (FeNO) measurements.

PARTICIPANTS

The studies included exposed cement production workers and non-exposed or low-exposed referents.

PRIMARY AND SECONDARY OUTCOMES

The searches yielded 594 references, and 26 articles were included. Cross-sectional studies show reduced lung function levels at or above 4.5 mg/m³ of total dust and 2.2 mg/m³ of respiratory dust. ORs for symptoms ranged from 1.2 to 4.8, while FEV₁/FVC was 1-6% lower in exposed than in controls. Cohort studies reported a high yearly decline in FEV₁/FVC ranging from 0.8% to 1.7% for exposed workers. 1 longitudinal study reported airflow limitation at levels of exposure comparable to ∼1 mg/m³ respirable and 3.7-5.4 mg/m³ total dust. A dose-response relationship between exposure and decline in lung function has only been shown in 1 cohort. 2 studies have detected small increases in FeNO levels during a work shift; 1 study reported signs of airway inflammation in induced sputum, whereas another did not detect an increase in hospitalisation rates.

CONCLUSIONS

Lack of power, adjustment for possible confounders and other methodological issues are limitations of many of the included studies. Hence, no firm conclusions can be drawn. There are few longitudinal data, but recent studies report a dose-response relationship between cement production dust exposure and declining lung function indicating a causal relationship, and underlining the need to reduce exposure among workers in this industry.

Thoracic dust exposure is associated with lung function decline in cement production workers

We hypothesised that exposure to workplace aerosols may lead to lung function impairment among cement production workers.

Our study included 4966 workers in 24 cement production plants. Based on 6111 thoracic aerosol samples and information from questionnaires we estimated arithmetic mean exposure levels by plant and job type. Dynamic lung volumes were assessed by repeated spirometry testing during a mean follow-up time of 3.5 years (range 0.7–4.6 years). The outcomes considered were yearly change of dynamic lung volumes divided by the standing height squared or percentage of predicted values. Statistical modelling was performed using mixed model regression. Individual exposure was classified into quintile levels limited at 0.09, 0.89, 1.56, 2.25, 3.36, and 14.6 mg·m⁻³, using the lowest quintile as the reference. Employees that worked in administration were included as a second comparison group.

Exposure was associated with a reduction in forced expiratory volume in 1 s (FEV₁), forced expiratory volume in 6 s and forced vital capacity. For FEV₁ % predicted a yearly excess decline of 0.84 percentage points was found in the highest exposure quintile compared with the lowest.

Exposure at the higher levels found in this study may lead to a decline in dynamic lung volumes. Exposure reduction is therefore warranted.

Cement dust exposure at levels comparable to stated workplace exposure limits may lead to obstructive lung changeshttp://ow.ly/Zl7ny

Relationships between Personal Measurements of 'Total' Dust, Respirable, Thoracic, and Inhalable Aerosol Fractions in the Cement Production Industry

AIMS

The aims of this study were to examine the relationships and establish conversion factors between 'total' dust, respirable, thoracic, and inhalable aerosol fractions measured by parallel personal sampling on workers from the production departments of cement plants. 'Total' dust in this study refers to aerosol sampled by the closed face 37-mm Millipore filter cassette.

METHODS

Side-by-side personal measurements of 'total' dust and respirable, thoracic, and inhalable aerosol fractions were performed on workers in 17 European and Turkish cement plants. Simple linear and mixed model regressions were used to model the associations between the samplers.

RESULTS

The total number of personal samples collected on 141 workers was 512. Of these 8.4% were excluded leaving 469 for statistical analysis. The different aerosol fractions contained from 90 to 130 measurements and-side-by side measurements of all four aerosol fractions were collected on 72 workers.The median ratios between observed results of the respirable, 'total' dust, and inhalable fractions relative to the thoracic aerosol fractions were 0.51, 2.4, and 5.9 respectively. The ratios between the samplers were not constant over the measured concentration range and were best described by regression models. Job type, position of samplers on left or right shoulder and plant had no substantial effect on the ratios.

CONCLUSIONS

The ratios between aerosol fractions changed with different air concentrations. Conversion models for estimation of the fractions were established. These models explained a high proportion of the variance (74-91%) indicating that they are useful for the estimation of concentrations based on measurements of a different aerosol fraction. The calculated uncertainties at most observed concentrations were below 30% which is acceptable for comparison with limit values (EN 482, 2012). The cement industry will therefore be able to predict the health related aerosol fractions from their former or future measurements of one of the fractions.