Endotoxin in Size-Separated Metal Working Fluid Aerosol Particles

Endotoxin in Aerosol Particles from Metalworking Fluids Measured with a Sioutas Cascade Impactor

OBJECTIVES

The aim of this study was to characterize personal occupational exposure to endotoxin in size-separated airborne particles of MWF aerosol, using a Sioutas cascade impactor (SCI).

METHODS

Exposure to inhalable fractions of MWF aerosol and endotoxin was measured by personal sampling of 52 individuals over an 8-h work shift using a PAS-6 sampler in parallel with a SCI (<0.25, 0.25-0.5, 0.5-1.0, 1.0-2.5, and 2.5-10 µm). Aerosol mass concentration was measured for each worker with a real-time instrument (DataRAM) during a full shift. Samples of MWF were collected from the machines and central tanks during the work shift.

RESULTS

A total of 117 measurements of inhalable MWF aerosols were made among 52 workers. The geometric mean of inhalable MWF aerosol was 0.16 mg m-3 air. The geometric mean of endotoxin concentration on the inhalable sampler was 0.15 EU m-3. Airborne endotoxin was found on all size fractions from the impactor, with the major part seen in the fraction (2.5-10 µm). There was a correlation between the inhalable fraction of endotoxin measured by the PAS-6 sampler and on the SCI sampler (2.5-10 µm), estimated to be 0.51 for all samples (P < 0.0001). The concentration of endotoxin varied between the MWFs, as did the proportion of Gram-negative bacteria among the culturable bacteria (>80% in one MWF and <1.5% in the other three).

CONCLUSIONS

The personal exposure to inhalable fractions of endotoxin contained in the MWF aerosol were low, where most of the endotoxin were found in fraction (2.5-10 µm), measured by SCI. There are differences between factories and MWF systems regarding the distribution of endotoxin and so results from one context should not be generalized to other plants and systems. Compressed air was used for less than 10 min shift-1. The mixed-effect model showed that working with open machines and grinding as cutting task were important determinants of exposure to inhalable aerosol. It is important to keep occupational exposure to aerosols low with the help of good ventilation systems, enclosed machines, and organization of work.

Assessment of airborne endotoxin in sandstorm dust and indoor environments using a novel passive sampling device in Al Zulfi city, Saudi Arabia - Establishing threshold exposure levels

The impact of sandstorm dust events affects local air quality and public health. These issues are becoming of greater concern in Saudi Arabia. There is a significant lack of research on airborne endotoxin exposure and analysis in the Middle East countries and no coherent body of research exists focusing on sandstorm dust in worldwide. In this study, we used a novel design of an aluminum foil plate (AFP) electrostatic dust cloth (EDC) for the passive air sampling of sandstorm dust. A total of 38 sandstorm dust samples were collected during sandstorm episodes occurring between January and April 2020 in both indoor (7 days, n = 20) and outdoor environments (24 h, n = 18). After exposure, and following an extraction procedure, bacterial endotoxin levels were measured using the Limulus Amoebocyte Lysate (LAL) gel clot method. The study highlights that the airborne endotoxin level observed was between 10 and 200 EU/m² in both indoor and outdoor environments, during a sandstorm event. Agricultural activities and farmhouses observed higher airborne endotoxin levels. In general, increased endotoxin levels were related to the severity of the sandstorms. Given that the observed values were high as per existing guidelines for respiratory health, we recommend the setting an occupational airborne exposure limit for bacterial endotoxin. This is the first report and further studies across various sandstorm-hit regions will need to be undertaken, together with various sampling methods, in order to assess for seasonal and geographic trends.

Work-related Symptoms and Asthma among Fish Processing Workers

After observing several clinical patients with respiratory symptoms, we initiated a questionnaire survey to assess prevalence of and predictors for asthma and work-related symptoms among workers in fish processing plants. A questionnaire with items on work conditions, work-related symptoms, and respiratory symptoms/diseases was sent to 916 fish processing workers, the 1836 licenced fishermen in Sweden, and 1965 controls; of those, 43%, 57%, and 53%, respectively, responded. Risks, hazard ratios (HRs), and prevalence ratios (PRs) were calculated with Cox regression, and 95% confidence intervals (CIs) were computed. The risk of asthma among fish filleting workers was increased during the years working in the fish processing industry when compared to the other fish processing workers and controls (HR 3.6, 95% CI 1.6-8.1, adjusted for atopy, gender, and ever smoking). The filleters had an increased PR for most of the work-related respiratory symptoms investigated. All fish processing workers had a higher PR for flu-like symptoms. Use of a pressure sprayer was identified as a risk for asthma and respiratory symptoms among both fish processing workers and controls. Filleters had changed work tasks because of respiratory symptoms more often (Fisher's exact test, p = 0.02) than other fish processing workers. In conclusion the fish filleters and pressure sprayer users reported more adult asthma and cough with phlegm compared to the other fish processing workers and controls. The use of pressure sprayers must be reduced and machinery should be completely encased to reduce workers' exposure to bioaerosols and its effects on the respiratory tract.

Assessment of the health risk related to exposure to ultrafine, fine, and total particulates and metals in a metal finishing plant

The materials and byproducts of the processes used in the metal finishing industry are released as particle contaminants into the air in the workplace. The present study aimed to determine the concentrations and size distributions of these particles and of elements chromium, nickel, copper, manganese, cobalt, and lead (Cr, Ni, Cu, Mn, Co, and Pb, respectively) in a metal finishing industry and evaluate their potential health risks. Particles that are airborne from the dipping baths in the plant were sampled using a Sioutas cascade impactor at five different size fractions (PM_>2.5, PM_1.0-2.5, PM_0.5-1.0, PM_0.25-0.5, PM_<0.25) and gravimetric analyses were conducted on the sampled filters. The GF-AAS 600 graphite atomic absorption spectrophotometer (PerkinElmer Corporation, Waltham, MA, USA) was used to analyze the elements and the method of USEPA was used to assess the health risk. The ratio of fine particles (PM_2.5) to total suspended particles (TSPs) was 0.6. We observed that 50% of TSPs were composed of PM_1.0 and that 68-88% of the metals were found in the fine particle fractions. Pb, Cr, and Mn were significantly positively correlated in the PM_1.0 fraction, and the highest linear relationship was found between Pb and Cr (r = 0.85, p < 0.01). The total hazard quotient (HQ) for PM_2.5 was 1.43, which is higher than the acceptable limit of 1.0. The excess lifetime cancer risk (ELCR) for hexavalent chromium (Cr[VI]) in PM_2.5 was 6.09 × 10^-5 for female workers and 6.54 × 10^-5 for male workers, which are higher than the acceptable limit of 1.0 × 10^-6, while total ELCRs for female and male workers were 6.21 × 10^-5 and 6.21 × 10^-5, respectively. The lifetime cancer risk associated with Cr(VI) in Cr electroplating plants should be taken into consideration as a significant health risk for the workers.

Jumping on the bed and associated increases of PM10, PM2.5, PM1, airborne endotoxin, bacteria, and fungi concentrations

Jumping on the bed is a favorite behavior of children; however, no study has investigated the increased air pollutants resulting from jumping on the bed. Therefore, we aimed to investigate the elevated concentrations of particulate matter (PM) and bioaerosols from jumping on the bed and making the bed. Simulation of jumping on the bed and making the bed was performed at sixty schoolchildren's houses in Taiwan. PM₁₀, PM_2.5, PM₁ (PM with aerodynamic diameter less than 10, 2.5, and 1 μm, respectively) and airborne bacteria, fungi and endotoxin concentrations were simultaneously measured over simulation and background periods. Our results show the increase of PM₁₀, PM_2.5, PM₁, airborne bacteria and fungi through the behavior of jumping on the bed (by 414 μg m-3, 353 μg m-3, 349 μg m-3, 6569 CFU m-3 and 978 CFU m-3, respectively). When making the bed, the PM₁₀, PM_2.5, PM₁, airborne bacteria and fungi also significantly increased by 4.69 μg m-3, 4.09 μg m-3, 4.15 μg m-3, 8569 CFU m-3, and 779 CFU m-3, respectively. Airborne endotoxin concentrations significantly increased by 21.76 EU m-3 following jumping on the bed and making the bed. Moreover, when jumping on the bed, higher PM_2.5 and PM₁ concentrations in houses with furry pets rather than no furry pets, and less airborne fungi in apartments than in townhouses were found. For making the bed, lower airborne fungi was found in houses using essential oils rather than no essential oils using. The airborne endotoxin concentrations were positively associated with furry pets and smokers in the homes and negatively correlated to the home with window opening with a statistical significance during the periods of jumping on the bed and making the bed. In conclusion, significant increases of PM and bioaerosols during jumping on the bed and making the bed may need to be concerned.