Plant architecture and foliar senescence impact the race between wheat growth and Zymoseptoria tritici epidemics

Modeling the Impact of Proportion, Sowing Date, and Architectural Traits of a Companion Crop on Foliar Fungal Pathogens of Wheat in Crop Mixtures

Diversification of cropping systems is a lever for the management of epidemics. However, most research to date has focused on cultivar mixtures, especially for cereals, even though crop mixtures can also improve disease management. To investigate the benefits of crop mixtures, we studied the effect of different crop mixture characteristics (i.e., companion proportion, sowing date, and traits) on the protective effect of the mixture. We developed a SEIR (Susceptible, Exposed, Infectious, Removed) model of two damaging wheat diseases (Zymoseptoria tritici and Puccinia triticina), which were applied to different canopy components, ascribable to wheat and a theoretical companion crop. We used the model to study the sensitivity of disease intensity to the following parameters: wheat-versus-companion proportion, companion sowing date and growth, and architectural traits. For both pathogens, the companion proportion had the strongest effect, with 25% of companion reducing disease severity by 50%. However, changing companion growth and architectural traits also significantly improved the protective effect. The effect of companion characteristics was consistent across different weather conditions. After decomposing the dilution and barrier effects, the model suggested that the barrier effect is maximized for an intermediate proportion of companion crop. Our study thus supports crop mixtures as a promising strategy to improve disease management. Future studies should identify real species and determine the combination of host and companion traits to maximize the protective effect of the mixture. [Formula: see text] Copyright © 2023 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license.

Evolution and Ecology of Parasite Avoidance

Parasite avoidance is a host defense that reduces the contact rate with parasites. We investigate avoidance as a primary driver of variation among individuals in the risk of parasitism and the evolution of host-parasite interactions. To bridge mechanistic and taxonomic divides, we define and categorize avoidance by its function and position in the sequence of host defenses. We also examine the role of avoidance in limiting epidemics and evaluate evidence for the processes that drive its evolution. Throughout, we highlight important directions to advance our conceptual and theoretical understanding of the role of avoidance in host-parasite interactions. We emphasize the need to test assumptions and quantify the effect of avoidance independent of other defenses. Importantly, many open questions may be most tractable in host systems that have not been the focus of traditional behavioral avoidance research, such as plants and invertebrates.

Multi-stage resistance to Zymoseptoria tritici revealed by GWAS in an Australian bread wheat diversity panel

Septoria tritici blotch (STB) has been ranked the third most important wheat disease in the world, threatening a large area of wheat production. Although major genes play an important role in the protection against Zymoseptoria tritici infection, the lifespan of their resistance unfortunately is very short in modern wheat production systems. Combinations of quantitative resistance with minor effects, therefore, are believed to have prolonged and more durable resistance to Z. tritici. In this study, new quantitative trait loci (QTLs) were identified that are responsible for seedling-stage resistance and adult-plant stage resistance (APR). More importantly was the characterisation of a previously unidentified QTL that can provide resistance during different stages of plant growth or multi-stage resistance (MSR). At the seedling stage, we discovered a new isolate-specific QTL, QSt.wai.1A.1. At the adult-plant stage, the new QTL QStb.wai.6A.2 provided stable and consistent APR in multiple sites and years, while the QTL QStb.wai.7A.2 was highlighted to have MSR. The stacking of multiple favourable MSR alleles was found to improve resistance to Z. tritici by up to 40%.

Detection of Maternal and Cytoplasmic Effects on Resistance to Zymoseptoria tritici in Durum Wheat

Septoria tritici blotch (STB) is a major disease problem of wheat worldwide. To optimize the introgression of resistance genes in elite genotypes throughout traditional or molecular breeding programs, a full understanding of the quantitative inheritance of resistance to Zymoseptoria tritici, plant height (PH), and thousand kernel weight (TKW) is needed. In this study, maternal and cytoplasmic effects of resistance to STB were investigated using P1 (susceptible, high-yielding line) and P2 (resistant, low-yielding line) durum wheat lines and their F₁, RF₁, F₂, RF₂, BC₁, RBC₁, BC₂, and RBC₂ progeny, assessed for resistance to STB during three growing seasons. Duncan mean's analysis revealed significant differences between generation means for STB, PH, and TKW. The two parents had an extreme pattern. The F₁ and RF₁ segregated close to their respective parents, suggesting the presence of cytoplasmic and maternal genetic effects for Z. tritici resistance, PH, and TKW. Separate generation mean's analysis confirmed the results of the Duncan test. A three-parameter model was found to be not adequate for all traits in all three growing years; while a digenic epistatic model with cytoplasmic or/and maternal effect was adequate for all cases. Narrow-sense heritability was in the range of 50–60%, 30–69%, and 28–31% for STB, PH, and TKW, respectively. For STB, high heritability and the presence of fixable epistatic effect is encouraging and could lead to creating varieties with the right female parent to exploit cytoplasmic and maternal effects in order to improve resistance to Z. tritici in durum wheat.

MuSCA: a multi-scale source-sink carbon allocation model to explore carbon allocation in plants. An application to static apple tree structures

BACKGROUND AND AIMS

Carbon allocation in plants is usually represented at a topological scale, specific to each model. This makes the results obtained with different models, and the impact of their scales of representation, difficult to compare. In this study, we developed a multi-scale carbon allocation model (MuSCA) that allows the use of different, user-defined, topological scales of a plant, and assessment of the impact of each spatial scale on simulated results and computation time.

METHODS

Model multi-scale consistency and behaviour were tested on three realistic apple tree structures. Carbon allocation was computed at five scales, spanning from the metamer (the finest scale, used as a reference) up to first-order branches, and for different values of a sap friction coefficient. Fruit dry mass increments were compared across spatial scales and with field data.

KEY RESULTS

The model was able to represent effects of competition for carbon assimilates on fruit growth. Intermediate friction parameter values provided results that best fitted field data. Fruit growth simulated at the metamer scale differed of ~1 % in respect to results obtained at growth unit scale and up to 60 % in respect to first order branch and fruiting unit scales. Generally, the coarser the spatial scale the more predicted fruit growth diverged from the reference. Coherence in fruit growth across scales was also differentially impacted, depending on the tree structure considered. Decreasing the topological resolution reduced computation time by up to four orders of magnitude.

CONCLUSIONS

MuSCA revealed that the topological scale has a major influence on the simulation of carbon allocation. This suggests that the scale should be a factor that is carefully evaluated when using a carbon allocation model, or when comparing results produced by different models. Finally, with MuSCA, trade-off between computation time and prediction accuracy can be evaluated by changing topological scales.

Contrasting phenotypes emerging from stable rules: A model based on self-regulated control loops captures the dynamics of shoot extension in contrasting maize phenotypes

BACKGROUND AND AIMS

The dynamics of plant architecture is a central aspect of plant and crop models. Most models assume that whole shoot development is orchestrated by the leaf appearance rate, which follows a thermal time schedule. However, leaf appearance actually results from leaf extension and taking it as an input hampers our ability to understand shoot construction. The objective of the present study was to assess a modelling framework for grasses, in which the emergence of leaves and other organs is explicitly calculated as a result of their extension.

METHODS

The approach builds on a previous model, which uses a set of rules co-ordinating the timing of development within and between phytomers. We first assessed rule validity for four experimental datasets, including different cultivars, planting densities and environments, and accordingly revised the equations driving the extension of the upper leaves and of internodes. We then fitted model parameters for each dataset and evaluated the ability to simulate the measured phenotypes across time. Finally, we carried out a sensitivity analysis to identify the parameters that had the greatest impact and to investigate model behaviour.

KEY RESULTS

The modified version of the model simulated correctly the contrasting maize phenotypes. Co-ordination rules accounted for the observations in all studied cultivars. Factors with major impact on model output included extension rates, the time of tassel initiation and initial conditions. A large diversity of phenotypes could be simulated.

CONCLUSIONS

This work provides direct experimental evidence for co-ordination rules and illustrates the capacity of the model to represent contrasting phenotypes. These rules play an important role in patterning shoot architecture and some of them need to be assessed further, considering contrasting growth conditions. To make the model more predictive, several parameters could be considered in the future as internal variables driven by plant status.

Two decades of functional-structural plant modelling: now addressing fundamental questions in systems biology and predictive ecology

BACKGROUND

Functional-structural plant models (FSPMs) explore and integrate relationships between a plant's structure and processes that underlie its growth and development. In the last 20 years, scientists interested in functional-structural plant modelling have expanded greatly the range of topics covered and now handle dynamical models of growth and development occurring from the microscopic scale, and involving cell division in plant meristems, to the macroscopic scales of whole plants and plant communities.

SCOPE

The FSPM approach occupies a central position in plant science; it is at the crossroads of fundamental questions in systems biology and predictive ecology. This special issue of Annals of Botany features selected papers on critical areas covered by FSPMs and examples of comprehensive models that are used to solve theoretical and applied questions, ranging from developmental biology to plant phenotyping and management of plants for agronomic purposes. Altogether, they offer an opportunity to assess the progress, gaps and bottlenecks along the research path originally foreseen for FSPMs two decades ago. This review also allows discussion of current challenges of FSPMs regarding (1) integration of multidisciplinary knowledge, (2) methods for handling complex models, (3) standards to achieve interoperability and greater genericity and (4) understanding of plant functioning across scales.

CONCLUSIONS

This approach has demonstrated considerable progress, but has yet to reach its full potential in terms of integration and heuristic knowledge production. The research agenda of functional-structural plant modellers in the coming years should place a greater emphasis on explaining robust emergent patterns, and on the causes of possible deviation from it. Modelling such patterns could indeed fuel both generic integration across scales and transdisciplinary transfer. In particular, it could be beneficial to emergent fields of research such as model-assisted phenotyping and predictive ecology in managed ecosystems.

Genetic Analysis Using a Multi-Parent Wheat Population Identifies Novel Sources of Septoria Tritici Blotch Resistance

Zymoseptoria tritici is the causative fungal pathogen of septoria tritici blotch (STB) disease of wheat (Triticum aestivum L.) that continuously threatens wheat crops in Ireland and throughout Europe. Under favorable conditions, STB can cause up to 50% yield losses if left untreated. STB is commonly controlled with fungicides; however, a combination of Z. tritici populations developing fungicide resistance and increased restrictions on fungicide use in the EU has led to farmers relying on fewer active substances. Consequently, this serves to drive the emergence of Z. tritici resistance against the remaining chemistries. In response, the use of resistant wheat varieties provides a more sustainable disease management strategy. However, the number of varieties offering an adequate level of resistance against STB is limited. Therefore, new sources of resistance or improved stacking of existing resistance loci are needed to develop varieties with superior agronomic performance. Here, we identified quantitative trait loci (QTL) for STB resistance in the eight-founder "NIAB Elite MAGIC" winter wheat population. The population was screened for STB response in the field under natural infection for three seasons from 2016 to 2018. Twenty-five QTL associated with STB resistance were identified in total. QTL either co-located with previously reported QTL or represent new loci underpinning STB resistance. The genomic regions identified and the linked genetic markers serve as useful resources for STB resistance breeding, supporting rapid selection of favorable alleles for the breeding of new wheat cultivars with improved STB resistance.

Adaptation of Biotrophic Leaf Pathogens to Fertilization-Mediated Changes in Plant Traits: A Comparison of the Optimization Principle to Invasion Fitness

One of the conclusions of evolutionary ecology applied to agroecosystem management is that sustainable disease management strategies must be adaptive to overcome the immense adaptive potential of crop pathogens. In this context, knowledge of how pathogens adapt to changes in cultural practices is necessary. In this article we address the issue of the evolutionary response of biotrophic crop pathogens to changes in fertilization practices. For this purpose, we compare predictions of latent period evolution based on three empirical fitness measures (seasonal spore production, within-season exponential growth rate, and area under disease progress curves [AUDPCs]) with predictions based on the concept of invasion fitness from adaptive dynamics. We use pairwise invisibility plots to identify the evolutionarily stable strategies (ESSs) of the pathogen latent period. We find that the ESS latent period is in between the latent periods that maximize the seasonal spore production and the within-season exponential growth rate of the pathogen. The latent periods that maximize the AUDPC are similar to those of the ESS latent periods. The AUDPC may therefore be a critical variable to determine the issue of between-strain competition and shape pathogen evolution.

Does the Latent Period of Leaf Fungal Pathogens Reflect Their Trophic Type? A Meta-Analysis of Biotrophs, Hemibiotrophs, and Necrotrophs

We performed a meta-analysis to search for a relation between the trophic type and latent period of fungal pathogens. The pathogen incubation period and the level of resistance of the hosts were also investigated. This ecological knowledge would help us to more efficiently regulate crop epidemics for different types of pathogens. We gathered latent period data from 103 studies dealing with 51 fungal pathogens of the three major trophic types (25 biotrophs, 15 hemibiotrophs, and 11 necrotrophs), representing 2,542 mean latent periods. We show that these three trophic types display significantly different latent periods. Necrotrophs exhibited the shortest latent periods (<100 degree-days [DD]), biotrophs had intermediate ones (between 100 and 200 DD), and hemibiotrophs had the longest latent periods (>200 DD). We argue that this relation between trophic type and latent period points to two opposing host exploitation strategies: necrotrophs mount a rapid destructive attack on the host tissue, whereas biotrophs and hemibiotrophs avoid or delay the damaging phase. We query the definition of hemibiotrophic pathogens and discuss whether the length of the latent period is determined by the physiological limits inherent to each trophic type or by the adaptation of pathogens of different trophic types to the contrasting conditions experienced in their interaction with the host.

Architectural Response of Wheat Cultivars to Row Spacing Reveals Altered Perception of Plant Density

Achieving novel improvements in crop management may require changing interrow distance in cultivated fields. Such changes would benefit from a better understanding of plant responses to the spatial heterogeneity in their environment. Our work investigates the architectural plasticity of wheat plants in response to increasing row spacing and evaluates the hypothesis of a foraging behavior in response to neighboring plants. A field experiment was conducted with five commercial winter wheat cultivars possessing unique architectures, grown under narrow (NI, 17.5 cm) or wide interrows (WI, 35 cm) at the same population density (170 seeds/m2). We characterized the development (leaf emergence, tillering), the morphology (dimension of organs, leaf area index), and the geometry (ground cover, leaf angle, organ spreading, and orientation). All cultivars showed a lower number of emerged tillers in WI compared to NI, which was later partly compensated by lower tiller mortality. Besides, the upper leaf blades were larger in WI. Finally the leaf area index at flowering showed little difference between WI and NI treatments. The rate of leaf emergence and the final leaf number were higher in WI compared to NI, except for one cultivar. Around the start of stem elongation, pseudo-stems were more erect in WI, while around the time of flowering, stems were more inclined and leaves were more planophile. Cultivars differed in their degrees of responses, with one appearing to prospect more specifically within the interrow space in WI treatment. Altogether, our results suggest that altering interrow distance leads to changes in the perceived extent of competition by plants, with responses first mimicking the effect of a higher plant density and later the effect of a lower plant density. Only one cultivar showed responses that suggested a perception of the heterogeneity of the environment. These findings improve our understanding of plant responses to spatial heterogeneity and provide novel information to simulate light capture in plant 3D models, depending on cultivar behavior.

A new mechanistic model of weather-dependent Septoria tritici blotch disease risk

We present a new mechanistic model for predicting Septoria tritici blotch (STB) disease, parameterized with experimentally derived data for temperature- and wetness-dependent germination, growth and death of the causal agent, Zymoseptoria tritici. The output of this model (A) was compared with observed disease data for UK wheat over the period 2002-2016. In addition, we compared the output of a second model (B), in which experimentally derived parameters were replaced by a modified version of a published Z. tritici thermal performance equation, with the same observed disease data. Neither model predicted observed annual disease, but model A was able to differentiate UK regions with differing average disease risks over the entire period. The greatest limitations of both models are: broad spatial resolution of the climate data, and lack of host parameters. Model B is further limited by its lack of explicitly defined pathogen death, leading to a cumulative overestimation of disease over the course of the growing season. Comparison of models A and B demonstrates the importance of accounting for the temperature-dependency of pathogen processes important in the initiation and progression of disease. However, effective modelling of STB will probably require similar experimentally derived parameters for host and environmental factors, completing the disease triangle. This article is part of the theme issue 'Modelling infectious disease outbreaks in humans, animals and plants: approaches and important themes'. This issue is linked with the subsequent theme issue 'Modelling infectious disease outbreaks in humans, animals and plants: epidemic forecasting and control'.

Estimating Sink Parameters of Stochastic Functional-Structural Plant Models Using Organic Series-Continuous and Rhythmic Development

Functional-structural plant models (FSPMs) generally simulate plant development and growth at the level of individual organs (leaves, flowers, internodes, etc.). Parameters that are not directly measurable, such as the sink strength of organs, can be estimated inversely by fitting the weights of organs along an axis (organic series) with the corresponding model output. To accommodate intracanopy variability among individual plants, stochastic FSPMs have been built by introducing the randomness in plant development; this presents a challenge in comparing model output and experimental data in parameter estimation since the plant axis contains individual organs with different amounts and weights. To achieve model calibration, the interaction between plant development and growth is disentangled by first computing the occurrence probabilities of each potential site of phytomer, as defined in the developmental model (potential structure). On this basis, the mean organic series is computed analytically to fit the organ-level target data. This process is applied for plants with continuous and rhythmic development simulated with different development parameter sets. The results are verified by Monte-Carlo simulation. Calibration tests are performed both in silico and on real plants. The analytical organic series are obtained for both continuous and rhythmic cases, and they match well with the results from Monte-Carlo simulation, and vice versa. This fitting process works well for both the simulated and real data sets; thus, the proposed method can solve the source-sink functions of stochastic plant architectures through a simplified approach to plant sampling. This work presents a generic method for estimating the sink parameters of a stochastic FSPM using statistical organ-level data, and it provides a method for sampling stems. The current work breaks a bottleneck in the application of FSPMs to real plants, creating the opportunity for broad applications.

Modelling interaction dynamics between two foliar pathogens in wheat: a multi-scale approach

Background and Aims

Disease models can improve our understanding of dynamic interactions in pathosystems and thus support the design of innovative and sustainable strategies of crop protections. However, most epidemiological models focus on a single type of pathogen, ignoring the interactions between different parasites competing on the same host and how they are impacted by properties of the canopy. This study presents a new model of a disease complex coupling two wheat fungal diseases, caused by Zymoseptoria tritici (septoria) and Puccinia triticina (brown rust), respectively, combined with a functional-structural plant model of wheat.

Methods

At the leaf scale, our model is a combination of two sub-models of the infection cycles for the two fungal pathogens with a sub-model of competition between lesions. We assume that the leaf area is the resource available for both fungi. Due to the necrotic period of septoria, it has a competitive advantage on biotrophic lesions of rust. Assumptions on lesion competition are first tested developing a geometrically explicit model on a simplified rectangular shape, representing a leaf on which lesions grow and interact according to a set of rules derived from the literature. Then a descriptive statistical model at the leaf scale was designed by upscaling the previous mechanistic model, and both models were compared. Finally, the simplified statistical model has been used in a 3-D epidemiological canopy growth model to simulate the diseases dynamics and the interactions at the canopy scale.

Key Results

At the leaf scale, the statistical model was a satisfactory metamodel of the complex geometrical model. At the canopy scale, the disease dynamics for each fungus alone and together were explored in different weather scenarios. Rust and septoria epidemics showed different behaviours. Simulated epidemics of brown rust were greatly affected by the presence of septoria for almost all the tested scenarios, but the reverse was not the case. However, shortening the rust latent period or advancing the rust inoculum shifted the competition more in favour of rust, and epidemics became more balanced.

Conclusions

This study is a first step towards the integration of several diseases within virtual plant models and should prompt new research to understand the interactions between canopy properties and competing pathogens.

Computational botany: advancing plant science through functional–structural plant modelling

The need to integrate the ever-expanding body of knowledge in the plant sciences has led to the development of sophisticated modelling approaches. This special issue focuses on functional–structural plant (FSP) models, which are the result of cross-fertilization between the domains of plant science, computer science and mathematics. FSP models simulate growth and morphology of individual plants that interact with their environment, from which complex plant community properties emerge. FSP models can be used for a broad range of research questions across disciplines related to plant science. This special issue presents the latest developments in FSP modelling, including the novel incorporation of plant ecophysiological concepts and the application of FSP models to address new scientific questions. Additionally, it illustrates the breadth of model evaluation approaches that are performed. FSP modelling is a very active domain of plant research which brings together a wide range of scientific disciplines. It offers the opportunity to address questions in complex plant systems that cannot be addressed by empirical approaches alone, including questions on fundamental concepts related to plant development such as regulation of morphogenesis, as well as on applied concepts such as the relationship between crop performance and plant competition for resources.