Simultaneous determination of fourteen pharmaceuticals in sewage sludge using online solid-phase extraction-liquid chromatography-tandem mass spectrometry combined with accelerated solvent extraction

An online solid-phase extraction (SPE) liquid chromatography tandem mass spectrometry method (HPLC-MS/MS) combined with accelerated solvent extraction (ASE) was developed for simultaneous determination of 14 pharmaceuticals in sludge. In the online SPE procedures, ultrapure water with no additives was used as the loading solvent. In addition, low molecular weight targets such as atenolol were difficult to retain on SPE column after acetone was added to the washing solvent. The response signal of analytes can be greatly improved by adding 0.2% formic acid to the mobile phase. Under the optimized conditions, the recoveries of all the analytes ranged between 75.1 and 112%. Moreover, the limit of detections ranged from 1.8 to 7.9 ug/kg. The precision of analytical data was determined with relative standard deviation (RSD) ≤ 4.87%. This method was successfully applied to determine the concentration of pharmaceuticals in sludge.

Seasonal variation and ecological risk assessment of Pharmaceuticals and Personal Care Products (PPCPs) in a typical semi-enclosed bay - The Bohai Bay in northern China

The Bohai Bay as a typical semi-enclosed bay in northern China with poor water exchange capacity and significant coastal urbanization, is greatly influenced by land-based inputs and human activities. As a class of pseudo-persistent organic pollutants, the spatial and temporal distribution of Pharmaceuticals and Personal Care Products (PPCPs) is particularly important to the ecological environment, and it will be imperfect to assess the ecological risk of PPCPs for the lack of systematic investigation of their distribution in different season. 14 typical PPCPs were selected to analyze the spatial and temporal distribution in the Bohai Bay by combining online solid-phase extraction (SPE) and HPLC-MS/MS techniques in this study, and their ecological risks to aquatic organisms were assessed by risk quotients (RQs) and concentration addition (CA) model. It was found that PPCPs widely presented in the Bohai Bay with significant differences of spatial and seasonal distribution. The concentrations of ∑PPCPs were higher in autumn than in summer. The distribution of individual pollutants also showed significant seasonal differences. The high values were mainly distributed in estuaries and near-shore outfalls. Mariculture activities in the northern part of the Bohai Bay made a greater contribution to the input of PPCPs. Caffeine, florfenicol, enrofloxacin and norfloxacin were the main pollutants in the Bohai Bay, with detection frequencies exceeding 80 %. The ecological risk of PPCPs to algae was significantly higher than that to invertebrates and fish. CA model indicated that the potential mixture risk of total PPCPs was not negligible, with 34 % and 88 % of stations having mixture risk in summer and autumn, respectively. The temporary stagnation of productive life caused by Covid-19 weakened the input of PPCPs to the Bohai Bay, reducing the cumulative effects of the pollutants. This study was the first full-coverage investigation of PPCPs in the Bohai Bay for different seasons, providing an important basis for the ecological risk assessment and pollution prevention of PPCPs in the bay.

DNA photoproducts released by repair in biological fluids as biomarkers of the genotoxicity of UV radiation

UV-induced formation of photoproducts in DNA is a major initiating event of skin cancer. Consequently, many analytical tools have been developed for their quantification in DNA. In the present work, we extended our previous liquid chromatography-mass spectrometry method to the quantification of the short DNA fragments containing photoproducts that are released from cells by the repair machinery. We designed a robust protocol including a solid-phase extraction step (SPE), an enzymatic treatment aimed at releasing individual photoproducts, and a liquid chromatography method combining on-line SPE and ultra-high-performance liquid chromatography for optimal specificity and sensitivity. We also added relevant internal standards for a better accuracy. The method was validated for linearity, repeatability, and reproducibility. The limits of detection and quantification were found to be in the fmol range. The proof of concept of the use of excreted DNA repair products as biomarkers of the genotoxicity of UV was obtained first in in vitro studies using cultured HaCat cells and ex vivo on human skin explants. Further evidence was obtained from the detection of pyrimidine dimers in the urine of human volunteers collected after recreational exposure in summer. An assay was designed to quantify the DNA photoproducts released from cells within short fragments by the DNA repair machinery. These oligonucleotides were isolated by solid-phase extraction and enzymatically hydrolyzed. The photoproducts were then quantified by on-line SPE combined with UHPLC-MS/MS with isotopic dilution.

Multidimensional Chromatography and Its Applications in Food Products, Biological Samples and Toxin Products: A Comprehensive Review

Food, drugs, dyes, extracts, and minerals are all made up of complex elements, and utilizing unidimensional chromatography to separate them is inefficient and insensitive. This has sparked the invention of several linked chromatography methods, each of them with distinct separation principles and affinity for the analyte of interest. Multidimensional chromatography consists of the combination of multiple chromatography techniques, with great benefits at the level of efficiency, peak capacity, precision, and accuracy of the analysis, while reducing the time required for the analysis. Various coupled chromatography techniques have recently emerged, including liquid chromatography–gas chromatography (LC–GC), gas chromatography–gas chromatography (GC–GC), liquid chromatography–liquid chromatography (LC–LC), GCMS–MS, LCMS–MS, supercritical fluid techniques with chromatography techniques, and electro-driven multidimensional separation techniques. In this paper, the different coupled chromatography techniques will be discussed, along with their wide spectrum of applications for food, flavor, and environmental analysis, as well as their usefulness for the pharmaceutical, color, and dyes industries.

A new on-line SPE LC-HRMS method for the analysis of Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) in PM2.5 and its application for screening atmospheric particulates from Dublin and Enniscorthy, Ireland

A sensitive analytical method has been developed and validated for the determination of 16 polyfluorinated alkyl substances (PFAS) in fine airborne particulate matter (PM_2.5) using on-line solid phase extraction (SPE) coupled with liquid chromatography (LC) - negative electrospray ionisation high resolution mass spectrometry (-) ESI-HRMS. On-line SPE allows simultaneous sample clean-up from interfering matrices and lower limits of detection (LODs) by injecting a large volume of sample into the LC system without compromising chromatographic efficiency and resolution. The method provides LODs in the range 0.08-0.5 pg/mL of sample extract allowing detection of selected PFAS in aerosol particles at low fg/m³ level and showed good tolerance to the considered PM matrix. The validated method was applied for analysis of PFAS in ambient PM_2.5 samples collected at two urban locations in Ireland, i.e., Enniscorthy and Dublin. Several PFAS were observed above the detection limit, including perfluorobutyrate (PFBA), perfluorooctanoic acid (PFOA), perfluorooctanesulfonic acid (PFOS), perfluorobutanesulfonic acid (L-PFBS) and perfluorononanoic acid (PFNA), as well as fluorotelomer sulfonates: 4:2 FTS, 6:2 FTS and 8:2 FTS. The results indicate that some toxic PFAS, such as PFOS and PFOA, are still detected in the environment despite being phased out from production and subject to restricted use in the EU and USA for more than two decades. Observation of fluorotelomer sulfonates (4:2 FTS, 6:2 FTS and 8:2 FTS, which are used as alternatives for legacy PFOA and PFOS) in ambient PM_2.5 samples raises a concern about their persistence in the atmosphere and impact on human health considering emerging evidence that they could have similar health endpoints as PFOA and PFOS. To our knowledge, this is the first study to identify PFAS in ambient PM_2.5 at urban locations in Ireland and also the first study to detect 4:2 and 8:2 fluorotelomer sulfonates in atmospheric aerosol particles.

Development of sol-gel silica-based mixed-mode zwitterionic sorbents for determining drugs in environmental water samples

Four novel mixed-mode zwitterionic silica-based functionalized with strong moieties sorbents were synthesized and evaluated through solid-phase extraction (SPE) to determine acidic and basic drugs in environmental water samples. All sorbents had the same functionalization: quaternary amine and sulfonic groups and C₁₈ chains so that hydrophobic and strong cationic exchange (SCX) and strong anionic exchange (SAX) interactions could be exploited, in addition, two of them had carbon microparticles embedded. All sorbents retained both acidic and basic compounds in the preliminary assays but only the basic compounds were retained selectively through ionic exchange interactions when a clean-up step was introduced. The SPE method was therefore optimized to promote the selective retention of the basic compounds, initially with the two best-performing sorbents. After optimization of the SPE protocol, these sorbents were evaluated for the analysis of environmental water samples using liquid chromatography-tandem mass spectrometry (LC-MS/MS). The method with the best-performing sorbent was then validated with 100 mL of river samples and 50 mL of effluent wastewater samples in terms of apparent recoveries (%R_app) spiking samples at 50 ng/L (river) and 200 ng/L (river and effluent), matrix effect, linear range, method quantification and detection limits, repeatability, and reproducibility. It should be highlighted that %R_app ranged from 40 to 85% and matrix effects ranged from -17 to -4% for spiked river samples. When the method was applied to river and effluent wastewater samples, most compounds were found in the range from 24 to 1233 ng/L with detection limits from 1 to 5 ng/L.

Developments of Microextraction (Extraction) Procedures for Sample Preparation of Antidepressants in Biological and Water Samples, a Review

Antidepressants are an important class of drugs to treat various types of depression. The determination of antidepressants is crucial in biological samples to control adverse effects in humans and study pharmacokinetics and bioavailability. Direct measurement of antidepressants in biological and water samples is a considerable challenge for analysts due to their low concentration, the high matrix effects of real samples, and the presence of metabolites of these drugs in biological samples. The challenge leads to using sample preparation processes as a critical step in determining antidepressants. Extraction and microextraction procedures have been widely utilized as sample preparation procedures for these drugs. The purposes of extraction or microextraction methods for antidepressant medications are to preconcentrate the analyte, reduce the matrix effects, increase the selectivity of the procedures, and convert the sample to a suitable format for introducing it into detection systems. In the review, the various extraction and microextraction methods of these drugs in biological, real water, and wastewater samples were investigated. The theory of each technique was briefly addressed to understand the features and factors affecting each method. The extraction and microextraction methods were classified based on their application for antidepressants, and the advantages and disadvantages of each technique were reviewed. The new developments to overcome the limitations of each procedure were discussed. The investigation indicated the number of applications of liquid-phase microextraction for extracting antidepressants has been almost equal to that of solid-phase microextraction.

Spatial variation of pharmaceuticals in the unit processes of full-scale municipal wastewater treatment plants in Korea

Several reports have elucidated the removal of pharmaceutical residues in municipal wastewater treatment plants (WWTPs). However, there remains a need to determine the spatial distribution of pharmaceuticals in the unit processes of full-scale municipal WWTPs. Herein, spatial variations of fifteen pharmaceuticals in the unit processes of four full-scale municipal WWTPs were assessed by analyzing both solid and liquid samples. Furthermore, different pathways of each pharmaceutical such as biodegradation, adsorption, deconjugation, and electrostatic interaction were investigated. Pharmaceutical mass loading were measured at various points for the different unit process and evaluated using liquid chromatography-tandem mass spectrometry. The average mass loading of acetaminophen and caffeine decreased tremendously in the first biological treatment process regardless of the process configuration. In contrast, a temporary increase was observed in the mass loading of ibuprofen in the anaerobic and/or anoxic processes, which was presumably caused by deconjugation. Additionally, the adverse effect of coagulation on ibuprofen removal was validated. The major removal mechanism for the selected antibiotics, except for sulfamethoxazole, was the adsorption by biosolids due to electrostatic interaction. Subsequently, a drastic decrease was observed in their mass loadings in the solid-liquid separation process of the WWTPs. The membrane bioreactor (MBR) shows excellent capability for mitigation of pharmaceuticals in municipal wastewater because it comprises a high concentration of biosolids that act as adsorbents. The evaluation of the spatial variations of the selected pharmaceuticals in different unit processes provides valuable information on their behavior and removal mechanisms.

A review of micro-solid-phase extraction techniques and devices applied in sample pretreatment coupled with chromatographic analysis

Sample pretreatment is one of the most crucial and error-prone steps of an analytical procedure; it consents to improve selectivity and sensitivity by sample clean-up and pre-concentration. Nowadays, the arousing interest in greener and sustainable analytical chemistry has increased the development of microextraction techniques as alternative sample preparation procedures. In this review, we aimed to show two different categorizations of the most used micro-solid-phase extraction (μSPE) techniques. In essence, the first one concerns the solid-phase extraction (SPE) sorbent selection and structure: normal-phase, reversed-phase, ion-exchange, mixed-mode, molecular imprinted polymer, and special techniques (e.g., doped cartridges for specific analytes). The second is a grouping of the commercially available μSPE products in categories and sub-categories. We present every device and technology into the classifications paying attention to their historical development and the actual state of the art. So, this study aims to provide the state-of-the-art of μSPE techniques, highlighting their advantages, disadvantages, and possible future developments in sample pretreatment.

Characteristics of veterinary antibiotics in intensive livestock farming watersheds with different liquid manure application programs using UHPLC-q-orbitrap HRMS combined with on-line SPE

Composted livestock manures, in both solid and liquid form, are used as fertilizers in cropland. However, excess solid and liquid manures in agricultural watersheds are considered as nonpoint pollution sources because of their high nutrient and heavy metal contents of, as well as their antibiotic contents, especially veterinary antibiotics (VAs). In this study, 21 VAs under nine classes (i.e., cephems, ionophores, lincosamides, penicillins, pleuromutilins, quinolones, streptogramins, sulfonamides, and tetracyclines) found in agricultural watersheds were simultaneously analyzed via UHPLC-q-orbitrap high-resolution mass spectrometry using an on-line solid-phase extraction system. The residues of VAs in the surface water of two intensive livestock rearing watersheds (Cheongmi and Gwangcheon streams) in Korea were successfully quantified, and the values were found to range from 1.84 ± 0.42 ng L^-1 to 835.6 ± 31.9 ng L^-1. Time lags of 2-3 months were observed between the periods of liquid manure application and the periods with the maximum concentrations of VAs. In both watersheds, samples from points close to areas with extensive application of liquid manure exhibited high concentrations of most of the 21 VAs. Between the watersheds, the one with heavier application of liquid manure showed higher concentrations of the target VAs. To the best of our knowledge, this study represents the first attempt at evaluating the correlation between liquid manure application and environmental occurrence of VAs in surface water. The findings reveal that liquid manure application plays an important role in introducing VAs into aquatic environments.

Therapeutic potential of polypeptide-based conjugates: Rational design and analytical tools that can boost clinical translation

The clinical success of polypeptides as polymeric drugs, covered by the umbrella term "polymer therapeutics," combined with related scientific and technological breakthroughs, explain their exponential growth in the development of polypeptide-drug conjugates as therapeutic agents. A deeper understanding of the biology at relevant pathological sites and the critical biological barriers faced, combined with advances regarding controlled polymerization techniques, material bioresponsiveness, analytical methods, and scale up-manufacture processes, have fostered the development of these nature-mimicking entities. Now, engineered polypeptides have the potential to combat current challenges in the advanced drug delivery field. In this review, we will discuss examples of polypeptide-drug conjugates as single or combination therapies in both preclinical and clinical studies as therapeutics and molecular imaging tools. Importantly, we will critically discuss relevant examples to highlight those parameters relevant to their rational design, such as linking chemistry, the analytical strategies employed, and their physicochemical and biological characterization, that will foster their rapid clinical translation.

Solvent Front Position Extraction with Semi-Automatic Device as a Powerful Sample Preparation Procedure Prior to Quantitative Instrumental Analysis

The new prototype device is applied to the Solvent Front Position Extraction (SFPE) sample preparation procedure. The mobile phase is deposited onto the chromatographic plate adsorbent layer by the pipette, which is moved, according to programmed movement path, by a 3D printer mechanism. The application of the prototype device to SFPE procedure leads to the increased repeatability of the results and significant reduction of the analysis time in comparison to the classical procedure of chromatogram development. Additionally, the new equipment allows use procedures that are not possible to run using the classic chromatogram development. In this paper, the results of manual and semi-automatic sample preparation with SFPE are compared and the possible application of this prototype device is discussed.

Molecular imprinting based on phosphorescent resonance energy transfer for malachite green detection in fishes and water

Room temperature phosphorescent quantum dots combined with molecular imprinting technology for the highly selective detection of malachite green (MG) in fish and water.

Hydrophilic interaction liquid chromatography tandem mass spectrometry analysis of malonyl-coenzyme A in breast cancer cell cultures applying online solid-phase extraction

Cofactors such as coenzyme A and its derivatives acetyl-coenzyme A and malonyl-coenzyme A are involved in many metabolic pathways. Due to trace level concentrations in biological samples and the high reactivity of cofactors, a fast, sensitive, and selective method for quantification is mandatory. In this study, online solid-phase extraction was coupled successfully to hydrophilic interaction liquid chromatography with tandem mass spectrometry for isolation of analytes in complex matrix and quantification by external calibration. Online solid-phase extraction was carried out by application of a weak anion-exchange column, whereas hydrophilic interaction liquid chromatography separation was performed on an amide modified stationary phase. Sample preparation of the extracts before the analysis was reduced to a centrifugation and dilution step. Moreover, the applied online solid-phase extraction significantly reduced matrix effects and increased the signal-to-noise ratio. The limit of detection and the limit of quantification were in the lower nanomolar range. Finally, the applicability of this method was demonstrated on MCF-7 breast cancer cell cultures, a commonly used model system, where acetyl-coenzyme A and malonyl-coenzyme A were determined using standard addition procedure in concentrations of 1.98 μM and 41 nM, respectively.

Rugged Large Volume Injection for Sensitive Capillary LC-MS Environmental Monitoring

A rugged and high throughput capillary column (cLC) LC-MS switching platform using large volume injection and on-line automatic filtration and filter back-flush (AFFL) solid phase extraction (SPE) for analysis of environmental water samples with minimal sample preparation is presented. Although narrow columns and on-line sample preparation are used in the platform, high ruggedness is achieved e.g., injection of 100 non-filtrated water samples did not result in a pressure rise/clogging of the SPE/capillary columns (inner diameter 300 μm). In addition, satisfactory retention time stability and chromatographic resolution were also features of the system. The potential of the platform for environmental water samples was demonstrated with various pharmaceutical products, which had detection limits (LOD) in the 0.05–12.5 ng/L range. Between-day and within-day repeatability of selected analytes were <20% RSD.

An LC-MS Assay with Isocratic Separation and On-line Solid Phase Extraction to Improve the Routine Therapeutic Drug Monitoring of Busulfan in Plasma

Background

Busulfan (Bu) requires therapeutic drug monitoring (TDM) in subjects undergoing a conditioning regimen for hematopoietic stem cell transplantation (HSCT). To speed up the procedure and increase reproducibility, we improved our routine LC-MS/MS assay using the on-line solid-phase extraction (SPE) of samples.

Methods

A protein precipitation (PP) step was performed before the on-line SPE of Bu from 200 µL of plasma spiked with octa-deuterated Bu (D8-Bu) as the internal standard. Bias was assessed with respect to our routine LC-MS/MS Bu assay with off-line extraction using the Passing-Bablok robust regression. Root cause of bias for individual samples was assessed by analyzing the regression residuals.

Results

The method was linear in the range 37.75–2,416 ng/mL (r2>0.999), with 19.74 ng/mL LLOQ and 10.5% CV at 20 ng/mL. Precision and accuracy were both within ±5%, and neither appreciable matrix nor carryover effects were observed. The Passing-Bablok regression analysis returned a 0.99 slope (95% CI: 0.97 to 1.01) and –6.82 intercept (95% CI: –15.23 to 3.53). Residuals analysis against the 2.5th–97.5th percentiles range showed four samples with significant bias individually.

Conclusions

The method presented can be successfully employed for the routine analysis of Bu in plasmatic samples, and can replace the LC-MS/MS method with off-line extraction without any statistically significant overall bias. In this regard, samples with individual significant bias were reasonably produced by preanalytical issues which had no relation with the conversion to the on-line SPE extraction.

Ultrahigh pressure extraction of bioactive compounds from plants-A review

Extraction of bioactive compounds from plants is one of the most important research areas for pharmaceutical and food industries. Conventional extraction techniques are usually associated with longer extraction times, lower yields, more organic solvent consumption, and poor extraction efficiency. A novel extraction technique, ultrahigh pressure extraction, has been developed for the extraction of bioactive compounds from plants, in order to shorten the extraction time, decrease the solvent consumption, increase the extraction yields, and enhance the quality of extracts. The mild processing temperature of ultrahigh pressure extraction may lead to an enhanced extraction of thermolabile bioactive ingredients. A critical review is conducted to introduce the different aspects of ultrahigh pressure extraction of plants bioactive compounds, including principles and mechanisms, the important parameters influencing its performance, comparison of ultrahigh pressure extraction with other extraction techniques, advantages, and disadvantages. The future opportunities of ultrahigh pressure extraction are also discussed.

Development and Multi-laboratory Verification of US EPA Method 543 for the Analysis of Drinking Water Contaminants by Online Solid Phase Extraction-LC-MS-MS

A drinking water method for seven pesticides and pesticide degradates is presented that addresses the occurrence monitoring needs of the US Environmental Protection Agency (EPA) for a future Unregulated Contaminant Monitoring Regulation (UCMR). The method employs online solid phase extraction-liquid chromatography-tandem mass spectrometry (SPE-LC-MS-MS). Online SPE-LC-MS-MS has the potential to offer cost-effective, faster, more sensitive and more rugged methods than the traditional offline SPE approach due to complete automation of the SPE process, as well as seamless integration with the LC-MS-MS system. The method uses 2-chloroacetamide, ascorbic acid and Trizma to preserve the drinking water samples for up to 28 days. The mean recoveries in drinking water (from a surface water source) fortified with method analytes are 87.1-112% with relative standard deviations of <14%. Single laboratory lowest concentration minimum reporting levels of 0.27-1.7 ng/L are demonstrated with this methodology. Multi-laboratory data are presented that demonstrate method ruggedness and transferability. The final method meets all of the EPA's UCMR survey requirements for sample collection and storage, precision, accuracy, and sensitivity.

QSAR aided design and development of biopolymer-based SPE phase for liquid chromatographic analysis of polycyclic aromatic hydrocarbons in environmental water samples

A solid-phase extraction method, using a starch based biopolymer as an adsorbent, coupled with high performance liquid chromatography-fluorescence/UV detectors was developed for the determination of 16 polycyclic aromatic hydrocarbons in environmental water samples.

New trends in sample preparation techniques for environmental analysis

Environmental samples include a wide variety of complex matrices, with low concentrations of analytes and presence of several interferences. Sample preparation is a critical step and the main source of uncertainties in the analysis of environmental samples, and it is usually laborious, high cost, time consuming, and polluting. In this context, there is increasing interest in developing faster, cost-effective, and environmentally friendly sample preparation techniques. Recently, new methods have been developed and optimized in order to miniaturize extraction steps, to reduce solvent consumption or become solventless, and to automate systems. This review attempts to present an overview of the fundamentals, procedure, and application of the most recently developed sample preparation techniques for the extraction, cleanup, and concentration of organic pollutants from environmental samples. These techniques include: solid phase microextraction, on-line solid phase extraction, microextraction by packed sorbent, dispersive liquid-liquid microextraction, and QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe).

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Determination of six chemotherapeutic agents in municipal wastewater using online solid-phase extraction coupled to liquid chromatography-tandem mass spectrometry

Due to the increased consumption of chemotherapeutic agents, their high toxicity, carcinogenicity, their occurrence in the aquatic environment must be properly evaluated. An analytical method based on online solid-phase extraction coupled to liquid chromatography-tandem mass spectrometry was developed and validated. A 1 mL injection volume was used to quantify six of the most widely used cytotoxic drugs (cyclophosphamide, gemcitabine, ifosfamide, methotrexate, irinotecan and epirubicin) in municipal wastewater. The method was validated using standard additions. The validation results in wastewater influent had coefficients of determination (R(2)) between 0.983 and 0.998 and intra-day precision ranging from 7 to 13% (expressed as relative standard deviation %RSD), and from 9 to 23% for inter-day precision. Limits of detection ranged from 4 to 20 ng L(-1) while recovery values were greater than 70% except for gemcitabine, which is the most hydrophilic compound in the selected group and had a recovery of 47%. Matrix effects were interpreted by signal suppression and ranged from 55 to 118% with cyclophosphamide having the highest value. Two of the target anticancer drugs (cyclophosphamide and methotrexate) were detected and quantified in wastewater (effluent and influent) and ranged from 13 to 60 ng L(-1). The proposed method thus allows proper monitoring of potential environmental releases of chemotherapy agents.

Comprehensive automation of the solid phase extraction gas chromatographic mass spectrometric analysis (SPE-GC/MS) of opioids, cocaine, and metabolites from serum and other matrices

The analysis of opioids, cocaine, and metabolites from blood serum is a routine task in forensic laboratories. Commonly, the employed methods include many manual or partly automated steps like protein precipitation, dilution, solid phase extraction, evaporation, and derivatization preceding a gas chromatography (GC)/mass spectrometry (MS) or liquid chromatography (LC)/MS analysis. In this study, a comprehensively automated method was developed from a validated, partly automated routine method. This was possible by replicating method parameters on the automated system. Only marginal optimization of parameters was necessary. The automation relying on an x-y-z robot after manual protein precipitation includes the solid phase extraction, evaporation of the eluate, derivatization (silylation with N-methyl-N-trimethylsilyltrifluoroacetamide, MSTFA), and injection into a GC/MS. A quantitative analysis of almost 170 authentic serum samples and more than 50 authentic samples of other matrices like urine, different tissues, and heart blood on cocaine, benzoylecgonine, methadone, morphine, codeine, 6-monoacetylmorphine, dihydrocodeine, and 7-aminoflunitrazepam was conducted with both methods proving that the analytical results are equivalent even near the limits of quantification (low ng/ml range). To our best knowledge, this application is the first one reported in the literature employing this sample preparation system.

Fully validated assay for the quantification of endogenous nucleoside mono- and triphosphates using online extraction coupled with liquid chromatography-tandem mass spectrometry

An analytical method coupling online solid-phase extraction (SPE) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed to quantify 16 endogenous nucleoside mono- and triphosphates in cellular samples. Separation was achieved on a porous graphitic carbon (PGC) column without ion-pairing agent in the mobile phase. Low levels of the ion-pairing agent diethylamine (DEA) added to the reconstitution solution were necessary to prevent peak tailing of nucleoside triphosphates. The mass spectrometer, a triple quadrupole with an electrospray ionisation source, was operated in positive mode. Two multiple reaction monitoring (MRM) segments were programmed, each an internal standard. Extraction and separation of nucleoside mono- and triphosphates were obtained within 20 min. The total duration of a single run was 37 min. Calibration curves, performed with labelled nucleotides added to the sample matrix, ranged from 0.29 to 18.8 pmol injected for deoxyribonucleotides and from 3.9 to 3,156 pmol for ribonucleotides. Accuracy did not deviate more than -14.6 and 10.2 % from nominal values for all compounds at all levels. CV results were all lower than 17.0 % for the LLOQ level and 14.6 % for the other levels. Quality control (QC) samples were also in agreement with acceptance criteria, except for the lower QC of GMP. Ion suppression, matrix effect, extraction recoveries and stability were assessed. After validation, the method was applied to the evaluation of the effects of gemcitabine and hydroxyurea on nucleotide pools in Messa cells.

Immobilized Fe (III)-doped titanium dioxide for photodegradation of dissolved organic compounds in water

Photocatalytic degradation of dissolved organic carbon (DOC) by utilizing Fe(III)-doped TiO2 at the visible radiation range is hereby reported. The photocatalyst was immobilized on sintered glass frits with the coating done by wet method, calcinated at 500 °C and then applied in a photodegradation reactor. The addition of a transition metal dopant, Fe(III), initiated the red shift which was confirmed by UV-Vis spectroscopy, and the photocatalyst was activated by visible radiation. X-ray diffraction patterns showed that Fe(III) doping had an effect on the crystallinity of the photocatalysts. Mixtures of DOC and associated coloured solutions were degraded in first-order kinetics, showing that the degradation process was not dependent on intermediates or other species in solution. A reactor with a catalyst coating area of 12.57 cm(2) was able to degrade 0.623 mg of the dissolved material per minute. Exposure of the reactor to hostile acidic conditions and repeated use did not compromise its efficiency. It was observed that the reactor regenerates itself in the presence of visible light, and therefore, it can be re-used for more than 100 runs before the performance dropped to <95 %. The results obtained indicate that the photocatalyst reactor has a great potential of application for use in tandem with biosorbent cartridges to complement water purification methods for domestic consumption.

A critical review of microextraction by packed sorbent as a sample preparation approach in drug bioanalysis

Sample preparation is widely accepted as the most labor-intensive and error-prone part of the bioanalytical process. The recent advances in this field have been focused on the miniaturization and integration of sample preparation online with analytical instrumentation, in order to reduce laboratory workload and increase analytical performance. From this perspective, microextraction by packed sorbent (MEPS) has emerged in the last few years as a powerful sample preparation approach suitable to be easily automated with liquid and gas chromatographic systems applied in a variety of bioanalytical areas (pharmaceutical, clinical, toxicological, environmental and food research). This paper aims to provide an overview and a critical discussion of recent bioanalytical methods reported in literature based on MEPS, with special emphasis on those developed for the quantification of therapeutic drugs and/or metabolites in biological samples. The advantages and some limitations of MEPS, as well as its comparison with other extraction techniques, are also addressed herein.

Recent advances in column switching sample preparation in bioanalysis

Column switching techniques, using two or more stationary phase columns, are useful for trace enrichment and online automated sample preparation. Target fractions from the first column are transferred online to a second column with different properties for further separation. Column switching techniques can be used to determine the analytes in a complex matrix by direct sample injection or by simple sample treatment. Online column switching sample preparation is usually performed in combination with HPLC or capillary electrophoresis. SPE or turbulent flow chromatography using a cartridge column and in-tube solid-phase microextraction using a capillary column have been developed for convenient column switching sample preparation. Furthermore, various micro-/nano-sample preparation devices using new polymer-coating materials have been developed to improve extraction efficiency. This review describes current developments and future trends in novel column switching sample preparation in bioanalysis, focusing on innovative column switching techniques using new extraction devices and materials.